Uninstaller utility does not remove the installation from the registry

In our environment, we publish a script in Group Policy so that both the ActiveX and Plugin installs for flash player are easily installed for staff that have limited user access on their computers. I usually remove or replace the old MSI files from the path the above script installs from when I get new versions of Flash Player. For a while, I've run into a problem where when the new MSI files are installed, they try to uninstall the existing installation and fail because the old MSI file is no longer at the original installation source path. I've tried to remedy this by having the script use the uninstall_flash_player utility to manually remove the activex and plugin first, but this utility does not remove the installation details of each from the registry, and the subsequent installations of the MSI files fail. I have to uninstall the existing flash player installations first or perform a registry hack to formally remove the installation from Windows, and then the new installation will succeed.
Does anybody have any advice for making this process work better? Would this be considered a bug with the uninstaller tool?

Hi, Until someone can reply to your thread/question, you may want to see this thread.
http://forums.adobe.com/thread/826773?tstart=0
eidnolb

Similar Messages

WRT54GX2 does not pick up time from the network...

I have a WRT54GX2 running firmware 1.01.14 and it does not pick up time from the network. I have PacBell (now AT&T) as an ISP and a DSL link. My old Netgear router picks up the time immediately. I am trying to figure out if I have a defective unit or if this is a firmware bug. Without the time, I can not use any of the scheduling functions, nor measure uptime.
Does anyone have this router with the time working? I have set the appropriate time zone.
Thanks,
Martin

mneiman wrote:
Thanks for you ideas.
The backup file appears to be binary. However in searching through it I did see 3 time related text strings, namely: clock.stdtime.gov.tw, time-b.nist.gov and time.nist.gov. I can successfully ping clock.stdtime.gov.tw and time.nist.gov. This reinforces my belief that my ISP (AT&T nee PacBell) is not blocking access.
however ntp works on TCP port 123. ping works on udp 7 afaik. if your old netgear works i guess this is a router problem.
have you reset the router yet? afaik press reset button for 10 seconds.
you will however loose all settings and need to enter them again. it may however fix the issue.Message Edited by linksysinfo on 07-09-2006 03:09 AM
Regards Simon
NAS: TS-459 Pro - 3.6.1 Build0302T - 4 x 1TB Samsung HD103SJ : EXT4 - APC ES 700VA UPS
QPKG: WordPress 3.4, TwonkyMedia 6.0.39 QPKG - Zenphoto1.4.2.1 [7802] - phpMyAdmin v3.3.10
Network: Netgear DG834G V4.01.40 - DGTeam Rev. 0849 -> Cisco RV220W 1.0.4.13, Cisco SLM2008, Dlink DSM-520, Xbox360

My iphone5 does not have any sound from the speakers ringtones or music any suggestions?

my iphone 5 does not have any sound from the speakers any suggestions on what culd be the problem and hopefully a fix

Just to add to this I can hear through the small speaker and the headphones it is just the speakers for ringtones and music etc

TS2529 itunes does not let me restore from the last backup of my recently upgraded to 5.1 iphone

I recently updated from 4.2.1 to 5.1 and now itunes does not show me the "restore from the backup of..." option. It doesn't even let me restore from any backup. I found the backup in the library and made a backup of it just in case. How can I restore from this backup if Itunes doesn't give me the option?
Please help!

Welcome to the discussions,
go to iTunes/Settings and see if "Apps" is selected in General/Show:
If yes, your App folder should be listed under "library" in the left window in iTunes again.
There is no extra App folder listed when you click on your device in the device list.
German version:
Im Menü iTunes/Einstellungen/Allgemein nachschauen, ob bei "Anzeigen" die Auswahl "Apps" aktiviert ist. Danach sollte der App Ordner unter dem Punkt "Mediathek" wieder auftauchen.
Wenn das Telefon in der Geräteliste markiert ist, gibt es den App Ordner nur auf der rechten Seite.

Incomplete Data on report (report does not show all records from the table)

Hello,
I have problem with CR XI, I'm running the same report on the same data with simple select all records from the table (no sorting, no grouping, no filters)
Sometimes report shows me all records sometimes not. Mostly not all records on the report. When report incomplete sometimes it shows different number of records.
I'm using CR XI runtime on Windows Server 2003
Any help appreciated
Thanks!

Sorry Alexander. I missed the last line where you clearly say it is runtime.
A few more questions:
- Which CR SDK are you using? The Report Designer Component or the CR assemblies for .NET?
- What is the exact version of CR you are using (from help | about)
- What CR Service Pack are you on?
And a troubleshooting suggestion:
Since this works on some machines, it will be a good idea to compare all the runtime (both CR and non CR) being loaded on a working and non working machines.
Download the modules utility from here:
https://smpdl.sap-ag.de/~sapidp/012002523100006252802008E/modules.zip
and follow the steps as described in this thread:
https://forums.sdn.sap.com/click.jspa?searchID=18424085&messageID=6186767
The download also includes instructions on how to use modules.
Ludek

I have my first mac. the music folder does not appear in favourites from the finder menu so i cant transfer my itunes library

I have my first mac. I want to transfer my iTunes library from my pc but the music folder does not appear in favourites when I select finder.

Choose Home from the Finder's Go menu.
(117823)

Trackpoint does not work after switching from the tablet to laptop mode.

I use my tablet to run a smartboard. Sometimes when I switch to the tablet mode and back by reversing the display, the trackpoint and mouse keys stop working. The touchpad below it still works. I am running windows 7. I have gone into the control panel, under mouse, and both the trackpoint and touchpad are still both checked. ?? When I restart the functions return.

Hi Remaxjoe,
Welcome to Lenovo Community Forums!
I’m really sorry to hear that trackpoint is not working properly in your Lenovo system.
I would suggest you to download the Ultranav drivers for your system and install it.
Below is the link to enter downloads page and install the Ultranav driver.
• Support Drivers & Software downloads
Please click on "QUICK PATH”, enter your system model and select the exact model depending on the MTM number of your device.
Spoiler (Highlight to read)
You can refer here for further information.
Hope this helps!
Best regards,
Mithun.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Can an iPhoto library that does not exist be recreated from the AlbumData.xml file?

Our iMac hard drive recently got corrupted and we hadn't backed up. (I know, I know, stupid, stupid, stupid. Won't make that mistake again!) The comptuer folk we took it too were able to recover most of the data on the drive, but my iPhoto library was not one of them. I don't have the library - the file is gone. But I do have the AlbumData.xml file. Is there any way to recreate the library from that file alone? I've tried it with iPhoto Library Manager and it wants me to have a default library for which this file is associated. I don't have that. Is there any way to get this data back? Some friends had trusted us with their wedding pictures. (I know, I know, stupid, stupid, and again, stupid. They won't make that mistake again!) I'd really, really, love to get them back if it's at all possible from this one file I do have.
Thanks in advance for any help!

No
iPhoto is a SQL database and you can only create the database (the iPhoto library) using a SQL editor - using iPhoto is the best
The database has many components and all of them must be there with exact names and in an exact structure to work
The only way you could rereate the library is from the photos (depending on the version of iPhoto you had they would have been in the originals or masters folder)
And yes - it is unfortuante but you have learned the most simple and basic lesson of computers - If you do not have a good current backup (I have multiple daily backups plus occasional offsite backups) you will eventually lose all of your data including your photos
LN

Mail does not show all mails from the same sender

Hello,
I have a problem with Mail - maybe an undiscovered bug? I play lotto on the free online platform www.freelotto.com. Each day freelotto sends me 6 mail receipts for any individual lotto game I took part of. The sender is always the same in each of these mails.
When I receive these mails on my iphone I got all the six mails I expected. The same on my ipad. But in Mail on my Mac (same settings) I got just four. Two mails are always missing!!! I have no idea why. The are not in the SPAM or any other folder (also not in the recycle bin). They are just missing at all. I also checked my mail provider but those two mails are not longer on the mail server. So Mail must have received them - but does not list them.
What can I do?
Regards,
Meisinotti

No one who could help?

Sql loader does not skip header rows from the second infile

Hi
I am new to Sql Loader and trying to figure out a way to load data into the table from 2 files which have different data in the same format. The files get successfully loaded into the database with just one glitch:
Its skips first 2 rows from the first file however it takes first 2 rows from the 2nd file which I do not want. Can anyone help me with this issue? How can i restrict loader from picking up the 2 header rows from the second file as well?
given below is the content of the control file
OPTIONS ( SKIP=2)
LOAD DATA
INFILE 'C:\loader\contacts\Italy_Wave11_Contacts.csv'
BADFILE 'C:\loader\contacts\Contacts.bad'
DISCARDFILE 'C:\loader\contacts\contacts.dsc'
infile 'C:\loader\contacts\Spain_Wave11_Contacts.csv'
BADFILE 'C:\loader\contacts\Contacts1.bad'
DISCARDFILE 'C:\loader\contacts\contacts1.dsc'
Truncate
into table V_contacts_dump
fields terminated by ',' optionally enclosed by '"'
trailing nullcols
(ASSISTANT_EMAIL_TX,
ASSISTANT_NM,
ASSISTANT_PHONE_TX,
BUSINESS_AREA_CD,
BUSINESS_EMAIL_TX,
BUSINESS_FAX_TX,
BUYER_ROLE_CD,
COMMENTS_TX,
COUNTRY_CD,
COUNTY_STATE_PROVINCE_CD,
DATE_OF_BIRTH_DT,
DO_NOT_CALL_IN,
DO_NOT_EMAIL_IN,
DO_NOT_MAIL_IN,
DOMESTIC_PARTNERS_NM,
FIRST_NM,
FULL_NM,
GENDER_CD,
INTERESTS_CD,
LAST_NM,
MIDDLE_NM,
MOBILE_TX,
OFFICE_PHONE_TX,
OWNER_PARTY_EMAIL,
PREFERRED_CONTACT_LANG_CD,
PREFERRED_CONTACT_CD,
PRIMARY_CONTACT_IN,
REFERRED_BY_TX,
SALUTATION_CD,
STAC_SRC_ID_TX,
STAC_STDS_SRC_ID,
STCN_SRC_ID_TX,
STREET_TX,
STREET2_TX,
STREET3_TX,
SUFFIX_TX,
TITLE_CD,
TOWN_CITY_TX,
ZIP_POSTAL_CD_TX )

It would be possible to call the loader twice with only one input-File at each run.

In Flash the sound does not play only started from the beginning. Can anyone please help?

In Flash, the sound only plays if the file is started from the beginning. The sound doesn't play if starting from anywhere other than the beginning.
This is very frustrating when trying to sync the animation with the sound as it's not possible to scroll back and forward with the sound playing. The only way the sound works is if it is started from the beginning.
If anyone can help that would be fantastic.
Thanks

Hi Jeromie,
Many thanks for your help. Here is some additional information, which may shed light on the problem.
I am using Flash Professional CC 2014.0 release, Build 14.0.0.110
The computer I'm using is then iMac running OSX version 10.9.3 Build 13D65 2.7 GHz Intel Core i5
I am using Flash, not a web-based editor that leverages Flash Player.
"a direct link to the project or tool would be useful in allowing us to attempt to reproduce the problem" - Not sure how to do this, how can I add the project to the forum?
Many thanks once again for your help, let me know if you need more information.
Cheers
Michael

My new LG exalt does not play my music from the sd micro card. my old phone was a LG wine III. why does it not play from my old lg wine to the new one

my

Let's get your music playing, beans3! What happens when you try to play your music from the SD card - Any error messages? Do the songs show as downloaded to your phone? Please share details so we can help.
TanishaS1_VZW
Follow us on Twitter@VZWSupport

I'm trying to install Windows XP on my Leopard 10.5.8 using Boot Camp Assistant but when it restarts it says I should insert a bootable disk even though I didn't remove the installer from the drive. What should I do?

More info: I'm using an external CD drive because the built-in one doesn't work for some reason.
Also I went back and deleted the partition (also using Boot Camp Assistant) and just gave up on installing XP, but now every time I turn on my macbook I have to press the Option key to mount the Mac HD. If I don't, it returns to the black screen that says I have to insert the bootable disk and press any key. How do I stop this problem? I've already verified the disk and permissions, plus repaired it. It's still the same.

Go into your system preferences and click the startup disk icon then select your Mac HD.

The backspace key does not remove anchor points along the lasso tools selection path.

I have the trial version of photoshop cc, Windows 7.

Sounds like you don't have all update installed. Use menu Help>About Photoshop should show 14.1.1 if all update are installed.

How do you start HTML DB? Just used the installer from the companion disc

Companion disc dated 09/08/2005 - it run fine. HTTP server is also running. It runs in Oracle_home. Instead of the home of my database Oracle_home1. How do I start HTML DB, I don't see any icon for it?
http://yourhostname:7777/pls/htmldb , browsing to this url doesn't work.
Cheers
Message was edited by:
10G-Newbie

10G-Newbie,
Make sure that you can tnsping your Oracle DB. I have installed HTMLDB recently and also couldn't connect to my HTMLDB, only to Oracle HTTP server. However, as soon I got my Oracle networking done correctly, and tnsping to my DB, I also could connect to HTMLDB.
Thank you,
DanielD

Uninstaller utility does not remove the installation from the registry

Similar Messages

Maybe you are looking for