Uninstalling and Installing the OEM Agent w/o OUI
Hi DBAs,
I have a 10.2.0.4 Oracle version on AIX with 2 node RAC Cluster. The old agent is 10.2.0.3 which I need to replace with new 10.2.0.4 agent. In order to install new agent, I need to remove the old version of Agent.
Please guide how can I uninstall the old agent without using Oracle Universal Installer. And also how I can install the new Agent w/o OUI.
Thanks
-Samar-
I was able to uninstall the Old Agent using the following command from all of the RAC instances. Can someone help me how can I install the Agent w/o using OUI.
./runInstaller -deinstall -silent "REMOVE_HOMES={/oracle/product/10.2.0/oem_1/agent10g}" -removeallfiles
Thanks
-Samar-
Similar Messages
-
I have uninstalled and installed the latest Flash Player 17 many times. I am currently working on a yearbook site that gets locked every time I try to add photos. I have also received a plug in error even though the plug in box is checked. I have a MacBook Pro. Please help!!!
To give you any useful advice, I'm going to need to know more about your computer and browser:
https://forums.adobe.com/message/5249945#5249945 -
Installing the OEM Agent on an AIX Clustered Environment
I have installed the OEM 10.2.0.5 agent on a server (sgramchdd50) that is part of an AIX HACMP cluster configuration. The other node of this cluster is sgramchdd51 and the cluster name is sgramchdd52. After installing the agent the server name sgramchdd50 is hard-coded into the the $AGENT_HOME/sysman/config/emd.properties file as follows....
EMD_URL=https://sgramchdd50:3872/emd/main/
The problem is that when we failover to the other node (sgramchdd51) the agent no longer works because the inactive node is hard-coded in certain places. I need to hardcode the cluster name as it is always pointing at the active node in the cluster. I have tried the following (with no success)...
-Stopped the agent
-Modified the EMD_URL parameter of the emd.properties file as follows
-EMD_URL=https://sgramchdd52:3872/emd/main/
-Started the agent
However, starting the agent fails.
sagramihqchdd50<orabss:orurebss> $ ./emctl start agent
Oracle Enterprise Manager 10g Release 5 Grid Control 10.2.0.5.0.
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
Starting agent ........................................................................................................................... failed.
Here are the last several lines of the emagent.trc file...
*2010-07-14 16:02:38,799 Thread-1 WARN collector: MESSAGE_NLSID "Successful Name Registration Request Sent By Identity Provider(%)" is too long, truncating to "Successful Name Registration Request Sent By Identity Provider(%"*
*2010-07-14 16:02:38,864 Thread-1 WARN collector: the column name DiskActivityavwait in this condition does not exist in metric DiskActivity*
*2010-07-14 16:02:38,934 Thread-1 WARN collector: the column name DiskActivityavwait in this condition does not exist in metric DiskActivity*
*2010-07-14 16:03:22,988 Thread-1071 ERROR fetchlets.oslinetok: Process exitcode = 0, stderr = Error connecting to https://sgramchdd52:3872/emd/main/*
emctl status agent returned agent not running.
*2010-07-14 16:03:22,988 Thread-1071 ERROR engine: [oracle_emd,sagramihqchdd52:3872,ProcessInfo] : nmeegd_GetMetricData failed : Error connecting to https://sgramchdd52:3872/emd/main/*
emctl status agent returned agent not running.
*2010-07-14 16:03:22,988 Thread-1071 WARN collector: <nmecmc.c> Error exit. Error message: Error connecting to https://sgramchdd52:3872/emd/main/*
emctl status agent returned agent not running.
Can anyone help with the necessary steps to take to accomplish what I'm trying to do.
Any help would be very much appreciated.
Thanks.
Edited by: user11171364 on Jul 15, 2010 7:09 AMI think you should try to find the solution in your DNS.
So lets say you name your node "MyActiveNode", your DNS only need to be modified to point to a different IP when failing over. The for the Agent it is still "logically" running on the same node.
Same thing if you should use a Server Load Balancer, use the name of the SLB to configure the Agent.
OK?
Regards
Rob
http://oemgc.wordpress.com -
I already tried uninstalling all add ons and then reinstall them again. Can the problem be related to the Siphon add on (which I no longer use)?
You posted your troubleshooting information in another thread ([[/questions/907656]]) that seems to indicate that you use or have used that profile folder with a lot of Firefox versions and are overriding the compatibility check (extensions.checkCompatibility.12.0).
You need to use a separate profile for each Firefox version if you want to use multiple Firefox versions.
* http://kb.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows
* http://kb.mozillazine.org/Shortcut_to_a_specific_profile
* http://kb.mozillazine.org/Using_multiple_profiles_-_Firefox -
this has been happening for a while , it would finally open , but now it won't open
What is that first page?
Can't you open any web pages in Firefox?
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
A possible cause is security software (firewall,anti-virus) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls -
Today when I recieved my new phone I realized I needed to back the older one up so I tried and failed when my computer said that my Itunes was out of date so I went on itunes to find out that I have no idea how to just update itunes with out uninstalling it. does anyone know how?
What do you mean it "won't update"? That is extremely vague and frankly a useless statement.
What happens when you try to update iTunes? Any errors?
There is no reason to uninstall.
If you want, you can always download and install the latest version from Apple's website, that is essentially all the update does anyways. -
i have the latest version of free Quicktime, Itunes and unable to view video on my PC all i get is a pink screen the audio is OK i have uninstalled and installed several times same problem, i have a Iphone 4 and unable to view the content.
Open your QuickTime control panel (either via the Control panels, or by going "Edit > Preferences > QuickTime Preferences" in the Quicktime Player). In the Advanced tab, uncheck Enable Direct3D video acceleration:
... and click OK. Quit and restart the QuickTime Player prior to checking to see if the settings change has had any effect. -
I just bought an iPhone 4s yesterday and it wouldn't connect to the iTunes 10.6.3 I had already on my laptop for my husbands 3gs and my brother in laws iPhone 4. Neither of them ever had a problem syncing with itunes. When I tried I was told to uninstall itunes and reinstall a 64bit version. Took several attempts but I finally got it. Then it said that I needed to upgrade my apple mobile device support and for me to uninstall itunes again and reinstall it. I have done all of this several times and still cannot get it to work right. I have uninstalled every Apple software listed on my computer and had to reinstall it all. Help!!!!!!!
Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If so, can you get a normal iTunes install to go through properly now?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.) -
I am trying to run iTunes. When I do I get this message "Apple Application Support was not found. Apple Application Support required to run iTunes. Please uninstall iTunes and install iTunes again. Error 2 (Wiindows error 2)" . However, in Control Panel, there isn't an option to remove or unistall iTunes, only an option to repair.
Now, when I dowloaded iTunes, i saved it to my flash drive so that i can have it with me whereever I go. I am not sure if the problem stems from there. I also did this so as not to save it on my work computer but still be able to run it from my flash drive.
Please HELP. I miss my music and podcast.This solved my question by b noir on Aug 26, 2011 7:23 PM
Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe, and select "Extract to iTunesSetup". WinRAR will expand the contents of the file into a folder called "iTunesSetup".
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you? If so, does iTunes launch properly now?
If instead you get an error message during the install, let us know what it says. (Precise text, please.) -
I have downloaded the latest Adobe Flash on my laptop and it is not working on safari for youtube.I have uninstalled and installed it multiply times and it still wont show me youtube videos
Enable Plug-ins
Safari > Preferences > Security
Internet Plug-ins > "Allow plug-ins"
Enable it.
Press " Manage Website Settings" button for more options. -
I am a Windows 7 user and everything has been fine, but when I just tried to open itunes I got an Error 2 message. "Apple application support not found. uninstall and install itunes again." I have done that twice with the same result. this was the 64 bit version.
Check this Apple document out -> Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
Try following the steps in that article, which will have you remove iTunes and the other bundled Apple software. Then download and install iTunes 10.4.1 for Windows (64 bit). -
I have just tried to update iTunes to the latest software and now I keep getting error messages. I have uninstalled and downloaded the latest version without any success. Any advice please?
Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any Bonjour entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another install. Does it go through this time? -
I bought an iphone 4s. After plugging it via usb to my computer itunes demanded to update version to 10.3 or higher. I uninstalled itunes, downloaded latest version (11.0.2) and during installation process on "activating services" it shows error message: "installation failed, verify administrator priviliges" which i have because i sign in as my pc administrator. I click on ignore and it tells me itunes has been succesfully instaled but when i try to run it it shows the error message: "apple application support was not found. It is required to run itunes. Uninstall and install itunes again. (which i have done several times) error 2 (windows error 2)." Someone please help me with this problem. Thanks.
Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.) -
I just downloaded and installed the new iTunes on a Toshiba Satelite of some age. It was just completely reformated and updated with XP. iTunes will not open. The terms page comes up and when I agree it disappears. I have uninstalled and reinstalled.
Perhaps something here will help:
http://support.apple.com/kb/TS1421
Regards. -
Wiped our old iPad 1 clean, now can't install iOS from iTunes using laptop PC (W Vista). iTunes does not "see" the device. Tried uninstalling and installing iTunes on laptop. Also bought new USB cable. The iPad is charging, but that's all it does. Just want to get it operating again for browsing and e-reading.
OK. You merely erased the content and settings. The IOS is still there.
If it has NEVER been jailbroke, here are some standard repair procedures. From what you've already stated, my guess is that you'll end up with Recovery Mode described in the last paragraph.
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again. Also, read this.
Maybe you are looking for
-
How to connect a Macbook Pro to the new iMacs?
I have an older model of Macbook Pro with a mini display port. Now i have bought a new iMac with thunderbolt and want to use it as an external display! is this completely impossible? Because i bought an MDP to MDP-cable but it didn't work.. i made a
-
Error during Year-end closing Asset Accounting (AJAB)
Hi, While executing transaction AJAB (year end closing AA) the system, the system issues a message "Transactions not completely periodically posted". The detailed message is AU075 "Asset balance sheet values not completely posted". Processing the err
-
I have tried to download apps and a window pops up saying apple id has been disabled. I have reset my password and it is still happening! Help
-
Scan resolution of PDF file from HP Officejet 4630
Hi, I'm running Mac OS9.1 and a HP Officejet 4630, and the HP Scan App. Appears to scan correctly, image in the App is good but when I save from the Scan app the PDF image is approx 4 times the size of the A4 page, ie when I open the PDF file only th
-
IPhoto not working after iLife download.
I am unable to use iPhoto now, just finished downloading iLife. Say's its either damaged or incomplete?? HELP!