Uninstalling Apps and junk from Mavericks
Hi
Okay after a big problem which I got fixed, many here told me not to use stuff like AppZapper and Onyx and of course any kind of "Mac-clean-up. All that junk is gone. hopefully;-)
But now on my MBP with Mavericks I have the entire Adobe CS3 what I want to uninstall (safely), along with some other stuff I never use. The only app that had an uninstaller was Acrobat and that didn't remove the app itself.
Am I wrong in understanding that I just move the app to the trash then immediately empty the trash, it will remove all parts of the program? Or is there another, (better) way to get it all out.
Thanks
Allen
Onyx and AppZapper are fairly reputable apps. They both have discrete, reasonable functions that are well described. I've used both of them for years and never had problems with either one.
(I don't use Onyx for much. It's maintenance and cache cleaning functions are almost never necessary to use.)
Perhaps you (or others) are confusing them with dreck like CleanMyMac or MacKeeper, which shoud never be installed on a Mac.
Dragging an app from the Applications folder to the trash will remove most of the app but will tend to leave behind things like preference files. The files that are left behind are relatively small, usually, and can probably be safely left in place, but I prefer to get rid of those bits too.
CS3 definitely comes with an uninstaller. See Remove Creative Suite 3 and CS3 products
I'd take a look at that and use the uninstaller.
If not, try AppZapper. Works very well and safely for uninstalling apps and their associated files. It shows you exactly what it is planning on uninstalling.
If you are concerned about doing it safely, do a full backup first.
Message was edited by: arthur
Message was edited by: arthur
Similar Messages
-
I have uninstalled iPhoto and reinstalled from the app Store, but still don't have the cards, calendar etc option under Share. Any other suggestions please?
With iPhoto 9.5.1 I have those both places - under the file menu and in the Share section
LN -
FCE 4.0.1 won't open when I click the icon in the Dock or in the Applications icon of FCE. It had been working well but I had trouble when I trashed the reference Scratch disk to a project and I was asked to get it back. I checked all my drives through verify in Disk Utility and a couple needed repair - eventually were given the OK. I then Shut Down and rebooted, I then trashed the FCE App and reinstalled from the Install discs and , finally, I tried opening a FCE project. None of these caused the FCE App to open with Browser, Viewer, Canvas,. Time Line. All that happens is the the first FCE window, the one that says FCE registered to...and the other that says loading AE Effects, Video Effects does show but then nothing except my Desktop with it's various folders and files I also downloaded the Plug In Tom Wolsky suggested to a recent query.
All I can think of is to backup everything to HDs and take this iMac in for a service.It is only six months old - I reckon it will be poor driving by it's proud but unskilled driver!
James Bowman
New ZealandDon't panic . . . . . yet!
You may not have trashed FCE properly.
Deleting the application icon is useless as there are a number of files hidden elsewhere which may be corrupt.
Download this free app to uninstall FCE completely and then reinstall it.
FCS Remover - Uninstall Final Cut Studio, Final Cut Pro, Motion, Compressor, Soundtrack Pro, Color, DVD Studio Pro, LiveType, Cinema Tools
I know it is called FCS Remover but it also works for FCE. -
i bought macbook pro used one because i wanna start to develop ios apps and i need Mavericks if it is a possible my mac is 10.6 please help me apple
Model Name: MacBook Pro
Model Identifier: MacBookPro5,5
Processor Name: Intel Core 2 Duo
Processor Speed: 2.26 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 3 MB
Memory: 4 GB
Bus Speed: 1.07 GHz
Boot ROM Version: MBP55.00AC.B03
SMC Version (system): 1.47f2
Serial Number (system): W8******66D
Hardware UUID: *****
Sudden Motion Sensor:
State: Enabled
<Edited By Host>Back up your data, check your applications for compatibility, and download Yosemite from the Mac App Store.
(121877) -
How can I update iPhoto and iVideo from Mavericks?
How can I update iPhoto and iVideo from Mavericks?
Was iVideo purchased on the app store? If so, both iPhoto and iVideo can be updated via the App Store. (You can click on Software Update under the Apple menu at the top left of your display).
-
Please help!!
How many times can you install Lightroom 5? My problem is that I have saved my programs on C. To I have more space, I want to save my programs now on E. Can I now uninstall Lightroom and reinstall from C to E? Can I use the same license code as the first installation?Thank you for your answers, it helps me a lot.
But sorry for my ignorance. I understand how you mean it, but I don't know how to do it. I'm scared to lose the settings/edits of the images. -
My family has an Apple ID and I also have one and I got apps on an iPhone with my Apple ID but I'm giving it away and erasing it an I want to put my account on my iPod and keep my apps and progress from family Apple ID can I do this keeping family iCloud
Open itunes, connect iphone,select what you want, sync
-
Me and my mom share an account and I bought all my apps and stuff on their. so I made my own account so that it would just have my stuff and it would charge to my credit card. So I was wondering how you can sink all the apps and stuff from one ID to another or link the accounts so that I don't have to repurchase everything.
You can render the ebook on an instructional application called Zankura. Not only can you control the screen scrolling, but all the students can freely annotate with their stylus. www.zankura.com.
-
I have an iPod Touch and want to transfer apps and games from my Mac. Is it possible? Thanks
thanks againYou can sync iOS apps from your compute's iTunes library to your iPod. An iPod will only run iOS apps/games. It will not run or even sync computer apps/games.
-
I can't enable or disable cellular data for certain iOS apps and features from setting.
When I off data for specific application and go to other option it automatic on all application
Any one can helpSOLUTION! (NO NEED TO RESET YOUR IPHONE SETTING!)
I have the same issue for the last two weeks. But i have already managed to solve the issue all by myself. When i go to Settings > Cellular > below the tab "use cellular data for:", i turned off some apps which i didnt want to use with cellular data. As soon as i go back to Settings, and then i went back to Cellular, the apps which i had switched off earlier, automatically turned back on.
Here's the solution:
Either you're using wifi or cellular data, first of all you're gonna hafto turn on the cellular data use for App Store. Once you have turned it on, go to App Store application. Update ALL the apps which have new updates available. If it asks you to log in your App Store, just do so. If there's something wrong with your debit or credit card information, it will ask you to update to a different card. Just do what it asks. Put in a new credit or debit card info and fill in the forms provided. The card you're using must be usable and has usable balance in it. Let's say atleast $10 to $20. As soon as it confirms your card successfully, the app updates will start automatically. Continue to update all the apps. After all updates are finished, go back to Settings > Cellular. Try to switch on or off some apps for data use and recheck.
Try it yourself! Have a nice day and don't put a blame on Apple for this.
From Malaysia, with love.
Please hit LIKE button if this solve your issue. Thank you very much! (: -
Can I restore settings, apps and data from an external hard drive to new Macbook Pro?
I recently lost my Macbook Pro to water damage. It was about 3 years old and tuned for comfort. Unfortunately, my most recent backup is at least 3 months old. I purchased a new MacBook Pro and I'm wondering what my options are for migrating my settings, apps and data from the old hard drive to the new MacBook Pro? I have a USB drive bay that I plan to attach to the new MBP to gain access to the old hard drive. Someone suggested Migration Assistant but my research hasn't turned up any information about migrating data from an external drive.
Any help would be greatly appreciated.THANKS! I guess my research wasn't THAT thorough. I booted with the external drive attached and setup immediately gave me the option to setup using Migration Assistant. It was a little slow via USB (2+ hours) but it was nothing compared to the time it would have taken to do it manually. My new 15" MBP looks exactly like my old 13" MBP. AWESOME!!!
Thanks again! -
I put in a new hard drive in my pc, how can i import my apps and music from my iphone to my pc
hi, i am trying to reinstall my apps and music from my iphone to my pc, i just put in a new hard drive. it is possible or do i have to install each one at a time
Use the Transfer Purchases command in the File menu of iTunes.
(60864) -
How do I get my apps and music from my phone to itunes.
How do I get my apps and music from my phone to itunes.
See Recover your iTunes library from your iPod or iOS device.
tt2 -
HT1848 how do i get my apps and music from my ipod to my iphone
how do i get my apps and music from my ipod touch to my iphone?????????
Either click here and follow the instructions, or follow those in the article you asked this question from and then sync the iPhone with that iTunes library.
(82400) -
HT4946 How do I transfer apps and photos from my ipad to my iPhone?
I just bought a new iPhone5 after my other putting my other phone the the washing machine! How do I get my apps and pictures from my ipad to my iphone. I was not able to save anything from my other ohone.
Using the same apple ID with both devices opens them up to share apps and data. There are some limits, for example some iPad apps are iPad only, they literally won't work on the iPhone due to the phone's limited resolution.
Maybe you are looking for
-
Receiving "Invalid char in text." error from file adapter
I'm testing a file adapter and am receiving the following error: Invalid char in text. The invalid character seems to be the ascii Record Separator character, Hex 1E, HTML Is it possible for me to modify the file adapter schema to handle this charact
-
Hi All, I have added a new tab page to the service contract item detail views by adding the followin entry to the Complete Assignment of Tabstrip Panel in CRMV_SSC. This new tab page is for service data from item category SPLA and I copied it to my s
-
Weird RAM issue , NEGATIVE ram used? anyone seen this before ?
PLS HELP , HOW DO I FIX THIS ? Negative ram used????? Solved! Go to Solution.
-
How does one recover lost photographs on the computer?
How does one recover lost photographs on the computer?
-
Problems with the System.Windows.Forms.Timer
Hi All, Could some one help me please? I'm having a problem using the System.Windows.Forms.Timer inside an ItemEvent, the timer event just doesn't works...give a look in my code: private System.Windows.Forms.Timer myTimer = new System.Windows.Forms.T