Uninstalling firmware for WRT54GL

Hello, I sure hope someone can help!
I have been successfully using my Linksys router for about a week now using 3 computers all running Ubuntu linux with Firefox 3 browser.
Tonight for some reason, I thought I should update firmware. I did NOT get a warning not to do this unless I was having problems currently (read that after the fact in the user manual!).
Anyway, after updating the firmware per the instructions, I can no longer view the url http://192.168.1.1 to update or change my profile. I was able to go there for the past days and even today (that's how I updated the firmware!) but now suddenly when I sign onto that page using "admin" as password, all I get is a jumbled mess.
I can see the Linksys colors and the model of my router, but none of the drop down boxes work (or have anything in them). There are no longer clickable links on the page such as "administrator" or "wireless" etc. The page is useless to me and I have to be able to see and use it obviously.
Everything was fine until I updated the firmware, then it all messed up. Sure wish that message telling me NOT to update firmware would have been more obvious!
I am editing and inserting this paragraph to let you know I have also tried on a Windows computer using Mozilla browser and using Internet Explorer so now I am absolutely sure it is not a browser issue and is a firmware issue. Please help me get my router back the way it was. I see in the instructs that you can 'set to factory defaults' but since I can't access the page I can't do that either.
Please tell me how I can undo my update! What a mess...I have a product I can not use now!
Thanks to all,
pirate laura
Message Edited by pirate on 11-08-2008 04:31 PM
Solved!
Go to Solution.

1. Make sure you don't have any firewall or anti-virus running on your computer. Those are known to mess with the JavaScript in the web interface. Turn firewall and AV off even if it worked before with the old firmware version.
2. To reset the router to factory defaults press the reset button on the router for 30 seconds. Check the lights to make sure that it does actually reset.
3. Make sure you want to upload the correct firmware file compatible with your router. Router models have different hardware versions and not all firmware versions for a model are compatible with all hardware versions. Which firmware file did you upload?
4. If this all does not work you may have to reflash the firmware again. Sometimes it does not properly flash. Follow the instructions here. The article is for a blinking power light situation but the tftp firmware upload described should still work for you, too. Flash the same firmware file again.

Similar Messages

  • Firmware for WRT54GL Router

    I have looked for 3 days to download the firmware file for the WRT54GL router. The CISCO download site only has the GPL for the router and not the firmware. Can anyone please point me in the right direction?

    jlbjlb wrote:
    Ok. I tried it. The bin file for hardware version 1.1 just downloaded to my hard drive. No problem.
    Hummm... what site are you going too?  All files I pull down are pdf files License agreements???
    http://homesupport.cisco.com/en-us/support/routers/WRT54GL

  • Original firmware for WRT54GL Version 1.1

    It appears that there is no firmware I can download for my WRT54GL Version 1.1. While it may never have been updated from what the router came with from the factory, it would still be useful to have it available. In my case, I would like to revert the router from the DD-WRT firmware to factory specs.
    Any suggestions for what I could do?
    Dominik Hoffmann

    Go to the United Kingdom version of the site where it will show a firmware download for v1.1.
    Who knows why it doesn't list for the US.
    http://www-uk.linksys.com/servlet/Satellite?c=L_CASupport_C2&childpagename=UK%2FLayout&cid=116685984...

  • Bad firmware on WRT54GL v1.1

    Tech support tells me my new router has bad firmware, but firmware for v1.1 isn't listed among the downloads. Where can I find it? Thanks.

    You can download the firmware for WRT54GL v 1.0 

  • L3 firmware for HP office jet 8600

    Hello
    I need the firmware for this type of printer that would allow me to update  firmware for use in Korea?? 
    firmware / MidHi_1322CR / coulomb_pp_CLP1CN1322CR.fhx <--- This is the file that we were looking for.
    However, in order to use this file we need 2 more files.
    3 (8600 (Korean) 6485 File) 처럼 파일이 2개 더 있어야 합니다.
    This is Korean firmware for HP 8600 pro.
    base_CLP1CN1322CR.fhx <-- 8600 main firmware file
    base_nandboot_xxxxFN1322CR2.fhx <-- 8600 sub firmware file
    base_pp_nandboot_0708.fhx <-- 8600 sub downgrade firmware file
    FW_Reflash_base.gsf <-- script (command File)

    Hello @Xavier227 and welcome to the HP Forums!
    I will certainly do my best to help out
    When you upgraded to OS X 10.10 did you uninstall the old HP software and reinstall the software for 10.10? If not, please follow this Uninstalling the Printer Software to get the software removed and then download this HP Officejet Pro 8600 series Full Feature Software and Drivers to reinstall with.
    If the issue persists after that, are you able to start the scan from the computer as opposed to the from of the printer? If you're not sure how to do that this How To Scan document will help (even though it says it's for 10.9, it will still help).
    Let me know how that goes for you!
    Hi @Kristina1 and welcome to the HP Forums!
    I'd be happy to get you the proper drivers as well, your printer just requires a slightly different approach as it doesn't have the full HP software available for it.
    Please follow this Installing Your HP Printer Driver and Software for Mac OS X document and it will explain how to get the printer properly installed.
    After that, have a look through this How to Scan document (under Scanning Without HP Software) for any scanning questions.
    Have a good one, hope to hear from you both soon
    Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    **MissTeriLynn**
    I work on behalf of HP

  • Unable To Repair/Update Firmware for a Creative Nomad Jukebox

    Hello all,
    I've been trying for the past...3 or 4 hours to get my player to work, but it simply refuses to work =P. I sent the problem into Creative, but haven't gotten a response for a couple days now. So, here's a copy-paste of what I sent in that e-mail. If you can think of anything that might help, please don't hesitate to post! I really need your help on this one!
    My player's hard dri've recently died, and I received
    a replacement from the original store (a CompUSA).
    However, my Firmware for the device has failed. I
    tried the firmware upgrade for my Zen, but after
    a certain number of tries, I gave up. Here is the
    list of steps that I followed.
    On Zen: Click "Reload OS", let it run, it says
    run the firmware upgrader now.
    On Computer: "You cannot install this firmware
    update with your player's current drivers using
    the SB394 connector. To update your player's
    firmware, this application will temporarily
    replace the current drivers and restore them after
    the installation is complete. Continue
    installation?", I click Yes. Then it says to
    disconnect, and re-connect. I do it.
    It shows my version (.2.0), and I'm upgrading/
    repairing it to .2.02. When I click "Upgrade", a
    warning message pops up and says:
    "Your player cannot start up properly. Please
    reboot your player and run this application again.
    I've done this at least 0 times, and nothing changes. My player is a Nomad Jukebox Zen, the one with a FireWire connection, and like I said,
    I've tried this at least 0 times with the same results. Is there a process to completely remove
    the firmware on the device, then reinstall it,
    or to roll it back or something? Any other ideas
    to fix this problem is needed as well.

    Bump.

  • Error occurred in deployment step 'Uninstall app for SharePoint': The remote server returned an error: (502) Bad Gateway.

    Installed SP 2013 Foundation in my Hyper-V machine
    Created and done all the steps mentioned here http://blogs.msdn.com/b/shariq/archive/2013/05/07/how-to-set-up-high-trust-apps-for-sharepoint-2013-amp-troubleshooting-tips.aspx && http://msdn.microsoft.com/en-us/library/office/fp179901%28v=office.15%29.aspx
    for self signed certificate
    copied those two certificates in my local machine(base machine) D drive
    (D:\Cert)
    Both VM and base machine are in same domain
    Installed VS 2013 in my base machine and create a Provided hosted app with the copied certificates, (For creation i followed the above mentioned URL)
    Just created and hit F5 to run in my base machine, but getting this error
    Error occurred in deployment step 'Uninstall app for SharePoint': The remote server returned an error: (502) Bad Gateway.
    Please help me to resolve this issue, trying to figure out from last 2 days
    Thanks in Advance
    Arun

    Hi Harminder,
    This happens because an app has already been deployed and you are deploying it again using the same version.
    Resolution:
    Open the AppManifest.xml file and change the version.
    Vivek Jagga - MCTS SharePoint
    SharePointExcellence

  • Can't find firmware for BEFW11S4 v2

    I'm having trouble finding a firware update for v2 of my BEFW11S4 router. The support page for this model offers a firmware update for v4 only. My current firmware v. is 1.45, which may be the latest version, but I can't seem to find this out anywhere on the Linksys website.
    The reason for the update is that my neew iPod 2G won't connect to the internet and I'm guessing an update might help.
    Thanks in advance for any assistance.

    You can Download 740 KB firmware for BEFW11S4 V2 and save it on the dekstop
    Follow these steps to upgrade the firmware on the device : -
    Open an Internet Explorer browser page on a computer hard wired to the router...
    In the address bar type - 192.168.1.1...Leave the Username blank & in Password use admin in lower case...
    Click on the 'Help' tab- Then click on the 'Firmware Upgrade' .... Here click on 'Browse' and browse the .bin firmware file and click on "Upgrade"...
    Wait for few seconds until it shows that "Upgrade is successful"  After the firmware upgrade, click on "Reboot" and you will be returned back to the same page OR it will say "Page cannot be displayed".
    Now reset your router :
    Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...
    If your Internet Service Providor is Cable follow this link
    If your Internet Service Providor is DSL follow this link

  • After downloading firmware for airport utility, airport express base station no longer registers with airport utility on my Mac. Now the base station is blinking amber with no info of what is causing all this to happen. Any suggestions?

    After downloading firmware for airport utility last night, airport express base station was deleted from airport utility and only Time Capsule remains. When I plug in the base station, an amber light blinks without being able to verify the cause. Any suggestions to remedy this problem?

    There are only a couple of things you can do to resuscitate a nonresponsive Express:
    "Hard reset":
    Press and hold the reset button with a pen or pencil until you see the status light (LED) start to flash amber rapidly, which should occur after about five seconds.
    If that does not work,
    "Factory defaults reset":
    Unplug the Express from power.
    Press and hold the reset button with a pen or pencil, then plug the Express back in while continuing to hold the button until you see the light (LED) flash rapidly. This should happen after a few seconds.
    Release the button.
    In either case you will have to reconfigure the Express as a new device. A moment or two after it has been reset, the LED should be blinking slowly. It must then appear in your Wi-Fi menu like this:
    Earlier versions of OS X will report it as "Apple Network nnnnnn".
    In either case, select it, and then launch AirPort Utility.
    If it does no appear in your Wi-Fi menu after it has been reset using one of the two techniques above, it is defective. Other than attempting another reset, there is nothing you can do.

  • For when a new firmware for normal N73?

    I know there is a new firmware for N73ME, my question is, anybody knows when will be release a new firmware for normal N73, with same improvements like N73ME (or more).
    Message Edited by naf1970 on 16-Jan-2008 07:22 PM
    Nokia N8 / N9 / Lumia 920 White

    29-Feb-2008 06:26 PM
    1983 wrote:
    I think N73 wont get any more updates... The new line of candy bar nseries is the target now: N82 and N78, and the other N81, N95s and N96,
    N73 is almost as old as N80, and n80 isnt getting any new updates. Sorry.
    ur wrong
    Nokia 5800 XpressMusic (11) [Product ID: 0559416]
    V 21.0.025 (date: 02-04-2009)
    network: mobily (etihad etisalat)

  • We are desperately waiting for a new firmware for ...

    hello nokia,
    we are using one of your most popular mobile the n73- music edition ( product code for my mobile 0564012)
    as it is seen over the internet that nokia is rolling out firmware updates for their s60v3 devices like some of the e-series.., i just want to know if nokia will release a firmware for our mobile..??
    if not.., its our humble request to release one.., which can provide better performance and stability..
    most common complaint is regarding its speed..
    for eg while entering to menu the mobile becomes sluggish.. even if the phone memory is empty n no memory card is ther...
    i've nokia n8, 5230, e63 at present in my family n i'm a big fan of nokia n iu'll be glad to see your  reply soon..., n ofcourse the new firmware.... pplllllssssss   do the needful..,
    ignore mistakes if any..

    The N73 was long since discontinued. There will be no further firmware updates for that model.
    If you are unhappy about that you can complain to nokia using the "contact us" link near the top or bottom of this page.

  • New Firmware For Nokia C3-00 : Reviews and Problem...

    Today i installed the newest firmware for nokia c3-00 : 8.65 with great anticipation that it would fix the problems and thats what i found out after hard and soft resets many times...
    ** Chat application is still not accesable. I just cant open it in the MESSAGING section even if i click it again and again ... can you fix this?
    ** As for communities, i am getting error of SERIVCE TEMPORARILY NOT AVAILABLE. I hope it really is a temporary error, and we dont have to wait for another firmware update.
    ** A CHAT APPS icon has poped up in my mobile phone and when i click on it , it takes me to nokia ovi's page of some mobile messengers and in which i can only download ebuddy and as for the rest i am getting error that 'THIS ITEM YOU ARE TRYING TO DOWNLOAD IS NOT COMPATIBLE WITH YOUR DEVICE AND/OR COUNTRY. DETECTED DEVICE NOKIA C3-00/PAKISTAN. 
      Does that means we wont be able to get our old ovi chat application ever? i liked that one because i had the facility to minimize the chat application and get notifications of messages. Cant you fix this because i cant do that with the 3rd party chat apps.
    Waiting for reply ...

    Hello friends!! 
    I had the same problem with this firmware update
    and for a moment I thought I had ruined my phone, but it occurred to me
    perform a factory reset on the phone and Communities and Chat surprise and something that works perfectly also note is that the browser to retrieve the factorygoes a little faster.
    I mention it again from your phone please contact Menu> Settings> Restore FactorySettings> All, expect to complete the restoration and your phone is 100% functional.
    Note: Before you restore a backup made ​​of all your files, emails, contacts, etc. That everything is removed with the restoration.

  • New firmware for Nokia N73 ME v4.0736.3.2.1

    Finally new firmware for N73 ME (RM-133)- product code 0539291.
    I'm updating my phone right now, but as all previous firmware versions, there is no change log. We have to figure out what has been fixed this time.
    Keep it cool )Message Edited by dejanos on 09-Oct-200704:26 PM
    Message Edited by dejanos on 09-Oct-200704:27 PM
    Nokia N73 ME RM-133 v4.0736.3.2.1
    Memory: 2GB Apacer miniSD

    09-Oct-200704:26 PM
    dejanos wrote:
    Finally new firmware for N73 ME (RM-133)- product code 0539291.
    I'm updating my phone right now, but as all previous firmware versions, there is no change log. We have to figure out what has been fixed this time.
    Keep it cool )Message Edited by dejanos on 09-Oct-200704:26 PM
    Message Edited by dejanos on 09-Oct-200704:27 PM
    is this the changelog?
    ttp://europe.nokia.com/A4577225 has the details of the new firmware
    Nokia N73 Software version 4.0735.3.0.2 / 4.0736.3.2.1 released - 9 October 2007
    This software version includes Nokia Maps 1.0 (edition 1.2) for use with Bluetooth GPS devices. This release also includes updates to the Music Library and music downloads, and performance improvements to SMS and device application installers.
    Blackberry Bold

  • New Firmware for Nokia C5

    When will nokia launch new firmware for nokia C5?....its been a lot of time from last firmware about 6 months...Please Nokia launch new firmware for Nokia C5
    Thanks

    Are you asking or requesting...........
    Nokia themself does not know the answer for it, As you know the product is geting older
    Hope they come up with one more update

  • New firmware for Nokia C7-00

    After a quick search around, i get completely lost about the right and safe firmware for this phone.
    There are some issues ready to be fixed, so im guessing nokia is working on that. Having that said, i see to many firmwares, to many versions, to many sources, absolutely no oficial news on that.
    Using the phone itself, there are no new updates.....
    Mine:
    Edition: PR1.0
    Soft Version: 012.003
    Version Date: 2010-09-19
    Personalised Version: 012.003.262.02
    Personalised Version Date: 2010-10-08
    Language Set: 012.003.11.01
    Product ID: 059D9Q6
    Model: C7-00
    Type: RM-675
    Last Update: No updates
    Browser Version: 7.2
    Flash Version: 4.0
    Java Version: 2.1
    3 questions:
    a) Is this the latest firmware?
    b) There are some unoficial notices about a 012.004 version. How can i know if its reliable?
    c) Where can i look for new firmware without using my phone to search it?
    Many thanks!

    Thanks steceso,
    Allready seen that page. Like i said, no oficial notices for new firmware for C7...
    Actualy, even i dont input my product code, when i select the phone, immediately i get: There are no software updates available for this product yet
    So, i understand  there is zero releases for this phone, since its exists....
    Hope im wrong.
    Paid big money for a phone who doesnt identify the sms sender.....
    Really frustrating....

Maybe you are looking for