Uninstalling/reinstalling exchange 2013 in hybrid environment

Hello guys,
We have exchange 2007 SP3 servers, Exchange 2013 CU3 with all
rules (no DAG) server and Office 365 .
Exchange 2013 CU3 servers were
installed initially only for office 365 migration needs. They configured as
hybrid servers.
No, after the migration I would like to install Exchange 2013
servers with DAG.
I am going to install 2 new servers with only Mailbox
role on Windows 2008 R2 enterprise.
Also, I will upgrade current Exchange
2013 CU3 to CU7.
Later after making sure everything is ok, I am planning to
remove mailbox role from these hybrid servers. Unfortunately, in order to do it,
exchange should be removed and re-installed with only client rule.
Will it
remove or change significantly hybrid configuration? Is there any manual how to
remove\reinstall exchange without changing hybrid config?
Second question: Are any issues with CU7 and it's better to stay with CU3? I prefer to upgrade since all the users who still not migrated to Office 365, are located on Exchange 2007. So it will be easier to do it now than later after migration
Please assist

Allen,
I uninstalled exchange and installed only client role on two servers and updated deleted settings on virtual directories. Needed to recreate arbitration mailbox and OAB. Everything is ok. hybrid config was not touched since I uninstalled exchange and reinstalled
it on servers one by one.
I configured WNLB for two client servers and configured its VIP hostname on outlook anywheree configuration- it's working. Since it's better to configure load balance with layer 7 and not 4, I will wait for F5 guy to create related VIP for me.
<textarea style="height:80px;width:444px;border:1px solid grey;padding:2px;"></textarea><select><option value="af">Afrikaans</option><option value="sq">Albanian</option><option value="ar">Arabic</option><option
value="hy">Armenian</option><option value="az">Azerbaijani</option><option value="eu">Basque</option><option value="be">Belarusian</option><option value="bg">Bulgarian</option><option
value="ca">Catalan</option><option value="zh-CN">Chinese (Simplified)</option><option value="zh-TW">Chinese (Traditional)</option><option value="hr">Croatian</option><option
value="cs">Czech</option><option value="da">Danish</option><option selected="selected" value="auto">Detect language</option><option value="nl">Dutch</option><option
value="en">English</option><option value="et">Estonian</option><option value="tl">Filipino</option><option value="fi">Finnish</option><option value="fr">French</option><option
value="gl">Galician</option><option value="ka">Georgian</option><option value="de">German</option><option value="el">Greek</option><option value="ht">Haitian
Creole</option><option value="iw">Hebrew</option><option value="hi">Hindi</option><option value="hu">Hungarian</option><option value="is">Icelandic</option><option
value="id">Indonesian</option><option value="ga">Irish</option><option value="it">Italian</option><option value="ja">Japanese</option><option value="ko">Korean</option><option
value="la">Latin</option><option value="lv">Latvian</option><option value="lt">Lithuanian</option><option value="mk">Macedonian</option><option value="ms">Malay</option><option
value="mt">Maltese</option><option value="no">Norwegian</option><option value="fa">Persian</option><option value="pl">Polish</option><option value="pt">Portuguese</option><option
value="ro">Romanian</option><option value="ru">Russian</option><option value="sr">Serbian</option><option value="sk">Slovak</option><option value="sl">Slovenian</option><option
value="es">Spanish</option><option value="sw">Swahili</option><option value="sv">Swedish</option><option value="th">Thai</option><option value="tr">Turkish</option><option
value="uk">Ukrainian</option><option value="ur">Urdu</option><option value="vi">Vietnamese</option><option value="cy">Welsh</option><option value="yi">Yiddish</option></select>⇄<select><option
value="af">Afrikaans</option><option value="sq">Albanian</option><option value="ar">Arabic</option><option value="hy">Armenian</option><option value="az">Azerbaijani</option><option
value="eu">Basque</option><option value="be">Belarusian</option><option value="bg">Bulgarian</option><option value="ca">Catalan</option><option value="zh-CN">Chinese
(Simplified)</option><option value="zh-TW">Chinese (Traditional)</option><option value="hr">Croatian</option><option value="cs">Czech</option><option value="da">Danish</option><option
value="nl">Dutch</option><option value="en">English</option><option value="et">Estonian</option><option value="tl">Filipino</option><option value="fi">Finnish</option><option
value="fr">French</option><option value="gl">Galician</option><option value="ka">Georgian</option><option value="de">German</option><option value="el">Greek</option><option
value="ht">Haitian Creole</option><option value="iw">Hebrew</option><option value="hi">Hindi</option><option value="hu">Hungarian</option><option value="is">Icelandic</option><option
value="id">Indonesian</option><option value="ga">Irish</option><option value="it">Italian</option><option value="ja">Japanese</option><option value="ko">Korean</option><option
value="la">Latin</option><option value="lv">Latvian</option><option value="lt">Lithuanian</option><option value="mk">Macedonian</option><option value="ms">Malay</option><option
value="mt">Maltese</option><option value="no">Norwegian</option><option value="fa">Persian</option><option value="pl">Polish</option><option value="pt">Portuguese</option><option
value="ro">Romanian</option><option selected="selected" value="ru">Russian</option><option value="sr">Serbian</option><option value="sk">Slovak</option><option
value="sl">Slovenian</option><option value="es">Spanish</option><option value="sw">Swahili</option><option value="sv">Swedish</option><option value="th">Thai</option><option
value="tr">Turkish</option><option value="uk">Ukrainian</option><option value="ur">Urdu</option><option value="vi">Vietnamese</option><option value="cy">Welsh</option><option
value="yi">Yiddish</option></select>
English (auto-detected) » Russian

Similar Messages

  • Reinstalling exchange 2013 after installing it before, what needs to be removed from AD?

    I feel stupid asking this but here goes,
    I have a single Exchange 2007 server with all roles and mailboxes on it. I had built an Exchange 2013 SP1 server and added to the domain and existing Exchange site, moved a test mailbox to it and confirmed transport was working ok between servers and outbound
    and inbound. That was all.
    I decided I wanted to partition the hard drive after all of this was done, so I needed to wipe everything out and start over. I know since it was added to the domain, that I need to remove some things before I start fresh again. I have no idea what to look
    for or remove.
    So, I need to know, can I simply build another fresh Exchange 2013 and add again to the domain and exchange site? Should I call it the same? Or something different?
    Should I use ADSI edit to clean up AD before building the new server? If so, what do I look for and clean/remove? Any help/advice would be gratefully received.
    Thanks.

    Hi,
    According your description, I know that you want to reinstall Exchange 2013 in multi environment.
    I agree with ED, in addition you need to move mailbox from current mailbox to another before freshing.
    Note: Microsoft don’t recommend that you use ADSI Edit unless intend to immediately reinstall the server in the same administrative group.
    Find a KB on “How to remove Exchange Server 2003 from your computer” for your reference:
    http://support.microsoft.com/kb/833396
    Best Regards,
    Allen Wang

  • How to uninstall first exchange 2013 server

    I have an existing exchange 2010 SP3 organization.  I am planning to install Exchange 2013 RTM on a production server
    to try it out.
    Can I easily uninstall the exchange 2013 completely after I am finished ? Is it just a matter of control panel/ add remove programs?
    Anand_N

    Hi Anand,
    Before you remove the first Exchange Server computer in the site, I would like to clarify the following thing:
    If there are any users or public folders (non-site) homed on this Exchange Server computer, you must move the mailboxes to another server in the site, and you must replicate any public folders to other servers in the site, to ensure that you do not lose
    data.
    Hope it helps.
    Best regards,
    Amy
    Amy Wang
    TechNet Community Support

  • Exchange 2013 & Office365 Hybrid Deployment_

    I have some queries before we deploy the hybrid model betweek exchange 2013 & office365.
    Our main reason for a hybrid deployment is to archive emails of certain users to office365.
    1. Can we achieve this with a hybrid model? Will the mailbox exist on premise exchange and archive data on Office365.
    2. Will the user be able to access his current emails and archived email from outlook or will he have to login to different screens?
    3. how do i deploy and configure the hybrid model.
    4. what are the certification requirements.
    Thanks in advance.

    Hi,
    1, Yes. Online Archive can achieve your goal. More information for your reference:
    Understanding Exchange Online Archiving
    http://technet.microsoft.com/en-us/library/hh529934(v=exchg.141).aspx
    Exchange Server 2013 Hybrid Deployments
    http://technet.microsoft.com/en-us/library/jj200581(v=exchg.150).aspx
    2. Based on my knowledge, user can access his current email and archived email from Outlook, doesn't need to go to a different screen.
    3. In article above.
    4. Certificate requirements for hybrid deployments
    http://technet.microsoft.com/en-us/library/hh563848(v=exchg.150).aspx
    Thanks
    Mavis Huang
    TechNet Community Support

  • Problem with Exchange 2010 Public Folders after installing Exchange 2013 in my environment.

    I currently have an Exchange 2010 server with all the roles installed.  Before installing Exchange 2013, I was able to launch the Public Folder Management Console but now I get an error.  When I installed Exchange 2013, I got an error saying I
    had a instance of Exchange 2000 or Exchange 2003, but I didn't have any of these servers left.  There was still something in AD referencing my old server. I went into ADSIedit and deleted an old administrative group.  This deletion caused my access
    to my public folders to get messed up.  I followed this article, http://blog.bruteforcetech.com/archives/766, and I was able to gain access back in my outlook client but I still can't see the public folders in OWA.  I also get this error when
    trying to access either Default or System Public Folders.  "Cannot complete the operation because there isn't an available public folder database on server 'ExchangeServer'. It was running the command 'get-publicfolder - getchildren -identity '\'
    -server 'ExchangeServer' "
    My Public Folder Database exists and is mounted.  Any help is appreciated.

    Hi Belinda,
    Thank you for responding.  Yes you do understand my problem correctly.  One correction is that after deleting this entry in ADSIEdit, we couldn't access public folders at all either in Outlook or OWA.  I followed these steps in the below article:
     http://blog.bruteforcetech.com/archives/766
    After following these steps and recreating the entry on FolderHieachies in ADSI edit, I was able to gain access to the public folders again through Outlook, but still can't see them in OWA and can't access them in Public Folder Management Console.
    Here are the results to your requests:
    et-PublicFolder -Recurse | Format-List Name
    Name : IPM_SUBTREE
    Can't get the public folder database using legacy distinguished name '/O=HEROIX CORPORATION/OU=EXCHANGE ADMINISTRAT
    GROUP (FYDIBOHF23SPDLT)/CN=CONFIGURATION/CN=SERVERS/CN=EXCHANGE2010/CN=MICROSOFT PUBLIC MDB'.
        + CategoryInfo          : NotSpecified: (:) [Get-PublicFolder], TaskInvalidOperationException
        + FullyQualifiedErrorId : B546E0B0,Microsoft.Exchange.Management.MapiTasks.GetPublicFolder
    [PS] C:\Windows\system32>Get-PublicFolder -Identity \NON_IPM_SUBTREE -Recurse | Format-List Name
    Name : NON_IPM_SUBTREE
    Name : EFORMS REGISTRY
    Can't get the public folder database using legacy distinguished name '/O=HEROIX CORPORATION/OU=EXCHANGE ADMINISTRATIVE
    GROUP (FYDIBOHF23SPDLT)/CN=CONFIGURATION/CN=SERVERS/CN=EXCHANGE2010/CN=MICROSOFT PUBLIC MDB'.
        + CategoryInfo          : NotSpecified: (:) [Get-PublicFolder], TaskInvalidOperationException
        + FullyQualifiedErrorId : B546E0B0,Microsoft.Exchange.Management.MapiTasks.GetPublicFolder
    Also the msExchOwningPFTree attribute should be correct because this was edited with the correct value when I followed the instructions in the above article:
    CN=Public Folders,CN=Folder Hierarchies,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=Heroix Corporation,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=hero,DC=net

  • Exchange 2013 in Mac Environment - iPhones recieves email, Mac Outlook does not, OWA Error: Your request cannot be completed right now. Please try again later.

    We are having some problems in Exchange when customers send us emails with large attachments. It doesn't happen all the time which is weird.
    The emails show up fine on iPhones although it is very slow to show the whole email and attachment.
    In OWA it gives an error - Error: Your request cannot be completed right now. Please try again later.
    The emails never make it to our computer email program, Mac Outlook 2011

    Hi,
    What’s your Exchange 2013 version?
    According to your description, I understand that the message which is sent from external customers with large attachments can’t be opened in OWA and Outlook for Mac for Exchange users. Is it rights?
    If that is the case, please confirm if the issue only happens with the large attachment messages. Please confirm if the message with no attachment sent from the same customer can be received and shown correctly in OWA.
    Please recycle the application pools in IIS Manager to have a try. If it doesn’t work, please change the OWA to use Conversation view then check whether the issue persists.
    Regards,
    Winnie Liang
    TechNet Community Support

  • Error on Configure-EnterprisePartnerApplication.ps1 after reinstall exchange 2013

    HI I get error when running configure-EnterprisePartnerapplication.ps1 on Exchange 2013 server after recreation of Exchange server. It has Work before.
    In yellow:
    WARNING: An unexpected error has occurred and a Watson dump is being generated: The value
    'MIIGwzCCBaugAwIBAgITKgAAABJmUs/ZLvUdgwAAAAAAEjANBgkqhkiG9w0BAQUFADBVMRIwEAYKCZImiZPyLGQBGRY...
    eIV8NBa933nE6Cj3FNwvjO3MFfvo0I2vQY3lh3sPsP8GO2MbTEiIcg==' is already present in the collection.
    In Red
    The value 'MIIGwzCCBaugAwIBAgITKgAAABJmUs/ZLvUdgwAAAAAAEjANBgkqhkiG9w0BAQUFADBVMRIwEAYKCZImiZPyLGQBGRYCZGsxHTAbBgoJkiaJ......
    Ox2mDEONaFeIV8NBa933nE6Cj3FNwvjO3MFfvo0I2vQY3lh3sPsP8GO2MbTEiIcg==' is already present in the collection.
        + CategoryInfo          : NotSpecified: (:) [New-PartnerApplication], InvalidOperationException
        + FullyQualifiedErrorId : System.InvalidOperationException,Microsoft.Exchange.Management.SystemConfigurationTasks.
       NewPartnerApplication
        + PSComputerName        : "Servername"
    How to fix this

    How did you recreate the Exchange server?
    Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

  • Uninstall/Reinstall Exchange 2010 in coexisting Exchange 2003

    Hi,
    Can we uninstall Exchange 2010 without any affect to Exchange 2003 in the co-existing environment?  I installed Exchange 2010 in existing Exchange 2003 and tried to configure for both Exchange exist in our domain.   Somehow the Exchange 2010 crashed
    and now it cannot start, only stuck in Initializing process.  I want to uninstall and then reinstall but I don't know if doing this will cause any problem to the Existing Exchange 2003.  Could someone tell me?
    Thanks,
    Jim

    You don't have to uninstall and reinstall server, just rebuild base server with OS with what it had earlier and recover Exchange 2010 with /m:recoverserver switch.
    Recover an Exchange Server
    I assume you still have Exchange 2010 database backup or original files for restore if needed and this is just OS crash and can not be repaired scenario
    Blog:
    http://exchangeshare.wordpress.com/

  • Installing / Upgrading Exchange 2013 to Exchange 2010 with a o365 Hybrid environment

    Hi
    I am trying to install a new server with Exchange  2013 on an environment with an existing Exchange 2010 Sp3. Reason for that is that I have a o365 hybrid environment and need to disconnect my on-line and on-premise e-mail connection. I want to completely
    run all my mailboxes on o365 no-longer dependent on on-premise exchange but the Exchange 2010 doesn't have a functionality to 'dismantle' the hybrid.. we need to have exchange 2013.
    When I try to install Exchange 2013 I get an error message that I need to upgrade my o365 tenant. : my o365 tenant version is : AdminDisplayVersion : 0.20 (15.1.49.12) :IsUpgradingOrganisation : False.
    Is there a better way of updating my environment.
    Regards

    Post the error from setup log for more information.
    Cheers,
    Gulab Prasad
    Technology Consultant
    Blog:
    http://www.exchangeranger.com    Twitter:
      LinkedIn:
       Check out CodeTwo’s tools for Exchange admins
    Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

  • Exchange 2013 Hybrid Configuration Wizard OAuth error

    Hi,
    We are facing following error when we run OAuth configuration after complete the Hybrid Configuration Wizard.
    Error:
    ScenarioFailureException
    Message:
    Exchange OAuth authentication couldn‎'t find any accepted domains in your on-premises organization.
    Verify you‎'ve configured at least one on-premises accepted domain.
    Location:
       at Microsoft.Online.CSE.HRC.Activities.OAuthActivities.GetCertificateActivity.Run‎()‎
       at Microsoft.Online.CSE.HRC.Workflow.Activity.WorkflowBaseActivity.Launch‎()‎
       at Microsoft.Online.CSE.HRC.Workflow.Runtime.WorkflowActivityHelper.Execute‎(ActivityContext context, Boolean launch)‎
       at System.Activities.NativeActivity.InternalExecute‎(ActivityInstance instance, ActivityExecutor executor, BookmarkManager bookmarkManager)‎
       at System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody‎(ActivityExecutor executor, BookmarkManager bookmarkManager,
    Location resultLocation)‎
    Environment:
    2x Exchange 2013 CU6 (DAG+one ClientAccess)
    Directory Sync Server
    No ADFS server since we don't need single sign on
    Office 365 E3 Tenant
    We have tried manually setup the OAuth configuration according to the below TechNet article but failed when running the ExportAuthCert.ps1
    script file. It couldn't match the certificate thumbprint with the location "Cert:\LocalMachine\My"
    http://technet.microsoft.com/en-us/library/dn594521%28v=exchg.150%29.aspx
    Please help!
    Thanks in Advance
    Roshan

    We have the exact same Issue, tried the exact same setup and NO JOY!! - any resolution yet?
    Also found this article:
    http://consulting.risualblogs.com/blog/2014/09/10/exchange-2013-cu6-hybrid-users-with-o365-unable-to-query-freebusy-for-on-premises-users/comment-page-1/#comment-5192  
    ..... but did not fix the free/busy
    Best Regards,
    Francois

  • Exchange 2013 Hybrid and Rightfax

    We are in the process of planning our migration to Office 365, and one of the things we currently use in our Exchange 2010 on prem solution is Rightfax for direct faxing inbound/outbound.   The plan is to roll out exchange 2013 in hybrid mode, and I
    am wondering what i need to do so that faxing continues to work?
    Since we will be running a hybrid, is it as simple as installing the rightfax service on the exchange server, or do I need to plan for some kind of cloud access, similar to how they borked up exchange UM integration (requires a session border controller,
    rather than routing through exchange on premises box).

    Hi,
    According to the description, following is my understanding:
    1. You want to migrate to Office 365 from Exchange server 2010.
    2. Exchange server 2010 host the Rightfax, now.
    3. You want to install a new Exchange server 2013 on-premise. Let the Exchange server 2013 on-premise host the Rightfax.
    4. Exchange server 2013 on-premise and Office 365 Hybrid Deployment.
    Please correct me if there is any misunderstanding.
    If all of above is right, I find some resource relate on Hybrid Deployment with Exchange 2013 on-premises and Office 365.
    Exchange Server 2013 Hybrid Deployments
    http://technet.microsoft.com/en-us/library/jj200581(v=exchg.150).aspx
    Note: If you want to move mailboxes from your on-premises organization to the Exchange Online organization, and those mailboxes are configured for UM, you should configure UM in your hybrid deployment prior to moving those mailboxes.
    If you move mailboxes before you configure UM in your hybrid deployment, those mailboxes will no longer have access to UM functionality.
    About the Rightfax, I find this from Microsoft resource:
    OpenText RightFax version 10
    http://pinpoint.microsoft.com/en-us/applications/opentext-rightfax-version-10-12884918124
    However it works with
    Hyper-V, Microsoft Exchange Server 2010, Microsoft Office 365, Microsoft SharePoint Server 2010, Windows Server 2008 R2.
    I'm not quite familiar with it. We can also contact to Rightfax Support to double confirm this.
    Thanks
    Mavis
    If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Mavis Huang
    TechNet Community Support

  • Seemingly successful install of Exchange 2013 SP1 turns into many errors in event logs after upgrade to CU7

    I have a new Exchange 2013 server with plans to migrate from my current Exchange 2007 Server. 
    I installed Exchange 2013 SP1 and the only errors I saw in the event log seemed to be long standing known issues that did not indicate an actual problem (based on what I read online). 
    I updated to CU7 and now lots of errors have appeared (although the old ones seem to have been fixed so I have that going for me). 
    Currently the Exchange 2013 server is not in use and clients are still hitting the 2007 server.
    Issue 1)
    After each reboot I get a Kernel-EventTracing 2 error.  I cannot find anything on this on the internet so I have no idea what it is.
    Session "FastDocTracingSession" failed to start with the following error: 0xC0000035
    I did read other accounts of this error with a different name in the quotes but still can’t tell what this is or where it is coming from.
    Issue 2)
    I am still getting 5 MSExchange Common 106 errors even after reregistering all of the perf counters per this page:
    https://support.microsoft.com/kb/2870416?wa=wsignin1.0
    One of the perf counters fails to register using the script from the link above.
    66 C:\Program Files\Microsoft\Exchange Server\V15\Setup\Perf\InfoWorkerMultiMailboxSearchPerformanceCounters.xml
    New-PerfCounters : The performance counter definition file is invalid.
    At C:\Users\administrator.<my domain>\Downloads\script\ReloadPerfCounters.ps1:19 char:4
    +    New-PerfCounters -DefinitionFileName $f
    +    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        + CategoryInfo         
    : InvalidData: (:) [New-PerfCounters], TaskException
        + FullyQualifiedErrorId : [Server=VALIS,RequestId=71b6bcde-d73e-4c14-9a32-03f06e3b2607,TimeStamp=12/18/2014 10:09:
       12 PM] [FailureCategory=Cmdlet-TaskException] 33EBD286,Microsoft.Exchange.Management.Tasks.NewPerfCounters
    But that one seems unrelated to the ones that still throw errors. 
    Three of the remaining five errors are (the forum is removing my spacing between the error text so it looks like a wall of text - sorry):
    Performance counter updating error. Counter name is Count Matched LowFidelity FingerPrint, but missed HighFidelity FingerPrint, category name is MSExchange Anti-Malware Datacenter Perfcounters. Optional code: 3. Exception: The
    exception thrown is : System.InvalidOperationException: The requested Performance Counter is not a custom counter, it has to be initialized as ReadOnly.
       at System.Diagnostics.PerformanceCounter.InitializeImpl()
       at System.Diagnostics.PerformanceCounter.set_RawValue(Int64 value)
       at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.set_RawValue(Int64 value)
    Last worker process info : System.ArgumentException: Process with an Id of 7384 is not running.
       at System.Diagnostics.Process.GetProcessById(Int32 processId)
       at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetLastWorkerProcessInfo()
    Performance counter updating error. Counter name is Number of items, item is matched with finger printing cache, category name is MSExchange Anti-Malware Datacenter Perfcounters. Optional code: 3. Exception: The exception thrown
    is : System.InvalidOperationException: The requested Performance Counter is not a custom counter, it has to be initialized as ReadOnly.
       at System.Diagnostics.PerformanceCounter.InitializeImpl()
       at System.Diagnostics.PerformanceCounter.set_RawValue(Int64 value)
       at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.set_RawValue(Int64 value)
    Last worker process info : System.ArgumentException: Process with an Id of 7384 is not running.
       at System.Diagnostics.Process.GetProcessById(Int32 processId)
       at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetLastWorkerProcessInfo()
    Performance counter updating error. Counter name is Number of items in Malware Fingerprint cache, category name is MSExchange Anti-Malware Datacenter Perfcounters. Optional code: 3. Exception: The exception thrown is : System.InvalidOperationException:
    The requested Performance Counter is not a custom counter, it has to be initialized as ReadOnly.
       at System.Diagnostics.PerformanceCounter.InitializeImpl()
       at System.Diagnostics.PerformanceCounter.set_RawValue(Int64 value)
       at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.set_RawValue(Int64 value)
    Last worker process info : System.ArgumentException: Process with an Id of 7384 is not running.
       at System.Diagnostics.Process.GetProcessById(Int32 processId)
       at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetLastWorkerProcessInfo()
    Issue 3)
    I appear to have some issues related to the healthmailboxes. 
    I get MSExchangeTransport 1025 errors for multiple healthmailboxes.
    SMTP rejected a (P1) mail from 'HealthMailbox23b10b91745648819139ee691dc97eb6@<my domain>.local' with 'Client Proxy <my server>' connector and the user authenticated as 'HealthMailbox23b10b91745648819139ee691dc97eb6'. The Active Directory
    lookup for the sender address returned validation errors. Microsoft.Exchange.Data.ProviderError
    I reran setup /prepareAD to try and remedy this but I am still getting some.
    Issue 4)
    I am getting an MSExchange RBAC 74 error. 
    (Process w3wp.exe, PID 984) Connection leak detected for key <my domain>.local/Admins/Administrator in Microsoft.Exchange.Configuration.Authorization.WSManBudgetManager class. Leaked Value 1.
    Issue 5)
    I am getting MSExchange Assistants 9042 warnings on both databases.
    Service MSExchangeMailboxAssistants. Probe Time Based Assistant for database Database02 (c83dbd91-7cc4-4412-912e-1b87ca6eb0ab) is exiting a work cycle. No mailboxes were successfully processed. 2 mailboxes were skipped due to errors. 0 mailboxes were
    skipped due to failure to open a store session. 0 mailboxes were retried. There are 0 mailboxes in this database remaining to be processed.
    Some research suggested this may be related to deleted mailboxes however I have never had any actual user mailboxes on this server. 
    If they are healthmailboxes or arbitration mailboxes that might make sense but I am unsure of what to do on this.
    Issue 6)
    At boot I am getting an MSExchange ActiveSync warning 1033
    The setting SupportedIPMTypes in the Web.Config file was missing. 
    Using default value of System.Collections.Generic.List`1[System.String].
    I don't know why but this forum is removing some of my spacing that would make parts of this easier to read.

    Hi Eric
    Yes I have uninstalled and reinstalled Exchange 2013 CU7 for the 3<sup>rd</sup> time. 
    I realize you said one issue per forum thread but since I already started this thread with many issues I will at least post what I have discovered on them in case someone finds their way here from a web search.
    I have an existing Exchange 2007 server in the environment so I am unable to create email address policies that are defined by “recipient container”. 
    If I try and do so I get “You can't specify the recipient container because legacy servers are detected.”
     So I cannot create a normal email address policy and restrict it to an OU without resorting to some fancy filtering. 
    Instead what I have done is use PS to modify extensionAttribute1 (otherwise known as Custom Attribute 1 to exchange) for all of my users. 
    I then applied an address policy to them and gave it the highest priority. 
    Then I set a default email address policy for the entire organization. 
    After reinstalling Exchange all of my system mailboxes were created with the internal domain name. 
    So issue number 3 above has not come up. 
    For issue number one above I have created a new thread:
    https://social.technet.microsoft.com/Forums/office/en-US/7eb12b89-ae9b-46b2-bd34-e50cd52a4c15/microsoftwindowskerneleventtracing-error-2-happens-twice-at-boot-ex2013cu7?forum=exchangesvrdeploy
    For issue number four I have posted to this existing thread where there is so far no resolution:
    https://social.technet.microsoft.com/Forums/exchange/en-US/2343730c-7303-4067-ae1a-b106cffc3583/exchange-error-id-74-connection-leak-detected-for-key?forum=exchangesvradmin
    Issue number Five I have managed to recreate and get rid of in more than one way. 
    If I create a new database in ECP and set the database and log paths where I want, then this error will appear. 
    If I create the database in the default location and then use EMS to move it and set the log path, then the error will not appear. 
    The error will also appear (along with other errors) if I delete the health mailboxes and let them get recreated by restarting the server or the Health Manager service. 
    If I then go and set the retention period for deleted mailboxes to 0 days and wait a little while, these will all go away. 
    So my off hand guess is that these are caused by orphaned system mailboxes.
    For issue number six I have posted to this existing thread where there is so far no resolution:
    https://social.technet.microsoft.com/Forums/exchange/en-US/dff62411-fad8-4d0c-9bdb-037374644845/event-1033-msexchangeactivesync-warning?forum=exchangesvrmobility
    So for the remainder of this thread we can try and tackle issue number two which is the perf counters. 
    The exact same 5 perf counter were coming up and this had been true each time I have uninstalled and reinstalled Exchange 2013CU7. 
    Actually to be more accurate a LOT of perf counter errors come up after the initial install, but reloading the perf counters using the script I posted above reduces it to the same five. 
    Using all of your suggestions so far has not removed these 5 remaining errors either.  Since there is no discernible impact other than these errors at boot I am not seriously bothered by them but as will all event log errors, I would prefer
    to make them go away if possible.

  • Setup Error Reinstallin Exchange 2013

    Trying to reinstalling Exchange 2013 after removing Exchange from ADSI, IIS, Registry, and Active Directory. Receiving the following error when attempting AD Prep. ERROR: Method Not found:  Boolean Microsoft.Exchange.Data.Mime.MimeAddressParser.IsValidDomain(System.String,
    Int32, Boolean)'. and the setup fails.  This occurs whether I try Schema Prep, ADPrep or just trying to load Exchange.  This is a lab environment.  Any suggestions to correct the install?

    When I look at the Schema with ADSI edit, I still see all the ms-exch attributes from the initial Schema Prep that was conducted. Both the Schema Prep and AD Prep was conducted successfully, but when Exchange 2013 SP1 combined was loaded, OWA never worked
    right and I was having issues connecting properly with SP 2013.  I did use a similar blog about uninstalling Exchange, that went into more depth that the one you listed.  Here is a copy of my Exch Setup Logs when I attempt to run Prepare AD:
    [04/23/2015 20:10:12.0108] [0] Starting Microsoft Exchange Server 2013 Service Pack 1 Setup
    [04/23/2015 20:10:12.0108] [0] **********************************************
    [04/23/2015 20:10:12.0108] [0] Local time zone: (UTC-05:00) Eastern Time (US & Canada).
    [04/23/2015 20:10:12.0108] [0] Operating system version: Microsoft Windows NT 6.2.9200.0.
    [04/23/2015 20:10:12.0108] [0] Setup version: 15.0.847.32.
    [04/23/2015 20:10:12.0124] [0] Logged on user: TSYSDEV\MConnelly.
    [04/23/2015 20:10:12.0140] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
    [04/23/2015 20:10:12.0187] [0] Command Line Parameter Name='preparead', Value=''.
    [04/23/2015 20:10:12.0187] [0] Command Line Parameter Name='organizationname', Value='ExchangeDev'.
    [04/23/2015 20:10:12.0187] [0] Command Line Parameter Name='iacceptexchangeserverlicenseterms', Value=''.
    [04/23/2015 20:10:12.0187] [0] Command Line Parameter Name='domaincontroller', Value='tsysdevdc2.tsysdev.net'.
    [04/23/2015 20:10:12.0187] [0] Command Line Parameter Name='sourcedir', Value='E:\Source'.
    [04/23/2015 20:10:12.0390] [0] RuntimeAssembly was started with the following command: '/PrepareAD /OrganizationName:ExchangeDev /IAcceptExchangeServerLicenseTerms /domaincontroller:tsysdevdc2.tsysdev.net /sourcedir:E:\Source'.
    [04/23/2015 20:10:12.0405] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Exchange\v8.0, wasn't found.
    [04/23/2015 20:10:12.0405] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\v14, wasn't found.
    [04/23/2015 20:10:12.0421] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
    [04/23/2015 20:10:12.0421] [0] Copying Files...
    [04/23/2015 20:10:12.0437] [0] Starting copy from E:\Source\Setup\ServerRoles\Common to C:\Windows\Temp\ExchangeSetup.
    [04/23/2015 20:10:18.0484] [0] Finished copy from E:\Source\Setup\ServerRoles\Common to C:\Windows\Temp\ExchangeSetup.
    [04/23/2015 20:10:18.0499] [0] File copy complete. Setup will now collect additional information needed for installation.
    [04/23/2015 20:10:18.0499] [0] Assembly dll file location is C:\Windows\Temp\ExchangeSetup\Microsoft.Exchange.Setup.Console.dll
    [04/23/2015 20:10:22.0593] [0] Setup is choosing the domain controller to use
    [04/23/2015 20:10:22.0687] [0] We have a user-specified or previously-chosen domain controller: tsysdevdc2.tsysdev.net
    [04/23/2015 20:10:22.0734] [0] [ERROR] Exception has been thrown by the target of an invocation.
    [04/23/2015 20:10:22.0734] [0] [ERROR] Method not found: 'Boolean Microsoft.Exchange.Data.Mime.MimeAddressParser.IsValidDomain(System.String, Int32, Boolean)'.
    [04/23/2015 20:10:22.0734] [0] CurrentResult SetupLauncherHelper.loadassembly:444: 1
    [04/23/2015 20:10:22.0749] [0] The Exchange Server setup operation didn't complete.  More details can be found in ExchangeSetup.log located in the <SystemDrive>:\ExchangeSetupLogs folder.
    [04/23/2015 20:10:22.0749] [0] CurrentResult main.run:235: 1
    [04/23/2015 20:10:22.0749] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
    [04/23/2015 20:10:22.0749] [0] CurrentResult setupbase.maincore:396: 1
    [04/23/2015 20:10:22.0749] [0] End of Setup
    Checked the registry and the keys it is looking for are not there, but no sure if I need to manually create them.  Any assistance would be created appreciated or if I need to conduct the back-out plan, I can try that.

  • Migrating an Exchange 2010 Generated OAB to Exchange 2013

    Hello,
    I'm trying to find some information on how to migrate the offline address book from Exchange 201o to Exchange 2013, but I'm having a lot of trouble finding anything at all that is of any use, so I was hoping the experts here might be able to offer some advice.
    I have an environment where all mailboxes are on Exchange 2010. Recently I introduced Exchange 2013 into the environment, so we have a co-existence situation. At the moment we run a multi-tenant system that has over 1600 OABs, all assigned to various customers
    using Address Book Policies. Soon, I will be starting to migrate mailboxes to 2013, so I was looking at what closing down activity is necessary to remove 2010, with one of the tasks being the transferral of the OAB. I understand the arbitration mailbox bit
    and how it works on 2013, equally I understand the 2010 bit and how that works, but it's the transition from using a 2010 OAB to using a 2013 OAB that I don't understand. From what I've read to date it seems like the only option might be to totally recreate
    the OABs in 2013. Surely this can't be the only way, can it? This is going to be a mammoth task for me if that's the case. Can I therefore just ask whether anyone knows anything about this in something other than a basic almost default environment where everyone
    only uses a single OAB and its an easy task?
    I have seen another post here in the forums about this:
    http://social.technet.microsoft.com/Forums/en-US/121f282c-1ff4-401d-9257-5dfbf17d4a5c/going-from-exchange-2010-to-exchange-2013-what-about-my-2010-oab?forum=exchangesvrgeneral
    I didn't fully understand the answer though. In the article above it states:
    "NO you don't have to move, all OAB's have already been created and stored in your OABGEN mailbox and are safe there Updating 12 times a day. The way OABs are stored has changed and its even better. all OABs have gone into <Default Offline
    Address Book 2013>."
    But that still doesn't detract from the fact that whether there's any kind of sync going on or not, I still have 1600+ OABs generated by a 2010 server, and either I can't uninstall the last 2010 server because of that, or I delete the OAB, in which case
    I lose the OAB anyway. Or is the articles trying to state that I don't need multiple OABs because it's all in the default, and that even if I use multiple ABPs then each one should use the default OAB? That doesn't sound right.
    I have tested doing it the manual way in a lab (by that I mean creating a new OAB in 2013, then replacing a test user's OAB in the ABP assigned to them). That seems to work, but I don't want to have to do it that way for everyone if I can avoid it.
    Any help would be much appreciated on this. 

    Ok, so I think I've got an answer to my own question here. Based on my own testing to find out how easy it would be to have to do a delete/recreate of the OABs in 2013 (given that I have over 1600 ABPs and corresponding OABs in a multi-tenant environment),
    I've got this:
    Identify ABPs and which 2010 OABs they use using Get-AddressBookPolicy
    Identify which address lists the 2010 OABs use using Get-OfflineAddressBook
    Create new OABs (maybe same name but putting '2013' on the end or something)
    Switch the OAB defined in the ABP using Set-AddressBookPolicy with the -OfflineAddressBook parameter
    Have I got that right? So actually, not too hard really (if I'm right of course), because I don't have to build any new GALs or ALs based on specific extensionAttribute values, because it's not necessary.

  • Outbound emails from one specific email address blocked by Exchange 2013

    Hi
    We have a hybrid environment Exchange Online and are using Exchange 2013 as hybrid server. We have an application that submits emails to Exchange using SMTP and sends emails from [email protected] Since almost half of our user base is already in Exchange
    Online, many of these emails which are generated on-premises need to be routed to Exchange Online. This configuration has been working for months. On 24/06/2014, the emails from this application stopped getting delivered. 
    On examination of message tracking logs, I found SMTP FAIL events - excerpt below.
    ConnectorId             : Outbound to Office 365
    Source                  : SMTP
    EventId                 : FAIL
    InternalMessageId       : 39560943768623
    RecipientStatus         : {[{LRT=};{LED=550 5.1.8 Access denied, bad outbound sender};{FQDN=};{IP=}]}
    Doing a search for the error in recipient status did not return anything but doing a search for "access denied, bad sender" did return results that suggested a scenario when a user in Exchange Online would be prevented from sending outbound email
    after having been identified as sending spam - see http://technet.microsoft.com/en-GB/library/dn458545(v=exchg.150).aspx
    It seems our on-premises Exchange 2013 server has enacted a similar block on our noreply address which sends out a lot of emails. I have been able to confirm that if the 'from address' is changed to something like [email protected], all emails from
    the application get delivered successfully.
    I now need to find out how I can unblock our noreply address so these emails can be sent with the original from address.
    Appreciate all help I can get on this one.

    Hi,
    From your description, only one email address can't send messages from the application server. I recommend you check if there is any transport rule on Office 365 blocking this problematic email address.
    What's more, please check your outbound spam policy, verify if there is any policy blocking this problematic email address.
    For more information, here is a thread for your reference.
    Configure the outbound spam policy
    http://technet.microsoft.com/en-us/library/jj200737(v=exchg.150).aspx
    Hope it helps.
    Best regards,
    Amy Wang
    TechNet Community Support

Maybe you are looking for

  • Data Template Creating

    Hi Guys , I have created a data template and it worls fine but when i attach a RTF template in oralce apps to it it errors out .. am i missing something ...? What are the steps i need to follow in order to register a Data Template with just Data Temp

  • Restricted Key Figure with interval variable

    Hi, I've a restricted key figure for KF 0AMOUNT restricted by 0FISCPER. There is a variable restriction on 0FISCPER which determines the period interval in customer exit. e.g. 001.2008 to 009.2008 The problem is, in query this RKF is returning only t

  • Why is the pinwheel popping up a lot during my use of iPhoto?

    Why is the pinwheel popping up a lot during my use of iPhoto?  What do I need to do to make it run smoother. Thanks, Erek

  • Nokia 6230i - Bluetooth modem

    While trying to connect to the internet via my mobile phone connected to the pc by bluetooth (IVT Bluesoleil dongle), PC Suite says that no Nokia modem is installed and advises to make sure that the Nokia connectivity cable driver is installed, which

  • Adobe Reader LE

    How can I instal back Adobe Reader LE after removing?