Union of all the selection variables

Hi All,
Is there a way to get a Union of all the available values of selection variables in BEx? For example, if I have a selection variable for 0material and 0country, and I put in 1234 and USA as the selection input.  Normally, you would get a report with '1234' AND 'USA'.  For my case, I want to get the report with '1234' OR 'USA'.  Basically, I want  report with both 0Material = '1234' OR with 0Country = 'USA' in one report.  Thanks in advance for your advice.
VV

To only list the material for a particular country.....In the first step, we would list the country before the material in the "rows" section.
In the "Columns" section, it sounds like there is only one key figure column needed with the variable for the "Country", but do NOT restrict by the "Material".  This should work whether you are showing a count of items or $ cost.
If this is not right... maybe we could see a simple example from you showing 5 total records with what you want to see in the final report for the columns and rows for 3 records you are trying to capture, etc....
Edited by: Sharon West on Nov 26, 2008 9:41 AM

Similar Messages

  • Where can I view all the presentation variables

    Hi,
    I have a question..... how can we see all the presentation variables defined ( created ) in answers/dashboards..? like if we want to see all the repository variable/session variables..we can see those in BI Admin Tool... from >manage>variable... like so forth is there any way to see all the presentation variables...........
    Thanks and Regards,
    Sri-Oracle..

    Hi Sri,
    We cannot see all the presentation variables at one place. It should require manual work, there are no hard and fast rules for this.
    But we can always know about the list of total prompts created in the following path:
    \OracleBIData\web\catalog\samplesales\root\shared\sample+sales\prompts
    Hope this helps.
    Thanks,
    Obul

  • How to see all the reporting variables in BW

    Hi All,
    Is there any method or table we have in BW to see all the reporting variables
    Thanks in Advance!
    BW User

    hello,
    check teh below:
    V_RSZGLOBV
    RSZGLOBV
    fields are:
    VNAM - variable name, technical name of the variables
    VARTYP - variable types : Characteristic value, Text variables, ...
    VPROCTP - Processing type for query variables : Manual entry/default value, Replacement path, Customer Exit
    IOBJNM - InfoObject
    Reg,
    Dhanya

  • Very weird! Preview doesn't open all the selected items!

    I transferred 120 photos from my digital camera to a new folder.
    Then I selected them all and double-clicked, causing them to open under Preview.
    But there are gaps in what opens!
    For example, none of the photos between filenames P1030899 and P1030955 open up!
    Yet if I select the photo files in that range separately and double-click on them they open up just fine!
    Why won't all the photos open up when selecting 120 at once?!
    I never noticed any such phenomenon with my old PB...
    doug

    OK. After doing some tests with Apple Support the problem turns out to be different, and perhaps more minor than I thought. But I would very much like other people here to test this as well!
    The images are, in fact, all loading by Preview. But what happens is the first couple load, then a bunch are skipped, then others load then the ones that didn't load before are loaded.
    So what Preview is showing after they are all loaded is not the images in order of filename, but the images in load order.
    If you control-click on any image and then click the "sort by name" option (even though that option was already selected) then the images immediately re-order themselves.
    So it is more a Preview sorting bug that it doesn't re-sort itself after loading all the images.
    I guess this never happened on my older PB because of the timings involved the load order was always the same as the file order alphabetically.
    What I would like to know is - can other people duplicate this as well?
    If you have a folder with, say, 200 or so image files in it, please "select all" and double-click. This will open all the images in Preview.
    Do all the images display in order immediately? Or is it like me where the first few display in order, then there is a gap of some number of images, then later images show up then your "missing" issues show up later. (You can resort after they are all loaded of course.)
    Thanks,
    doug

  • Delaying a function so ADF will get all the selected rows and run only 1 time ?

    Hello,
    I'm using JDeveloper 12.1.2.0.0.
    I have a group of functions that are executed after i click on one or more rows, which is called:
    public void onDimProjectSelect(SelectionEvent selectionEvent)
    Whenever i shift-click some rows (lets say, for the purpose of this example, that i shift-click the 1st row to the 5th row, so i shift select and i get selected the rows: 1,2,3,4 and 5).
    I did notice that what happens is that the function onDimProjectSelect will execute with the 1st row, and after it runs all the functions, it will run again the function onDimProjectSelect with the 1, 2, 3, 4 and 5 rows as it should in the first place.
    Why is this happening? I've tried to add a delay but i did not work.
    This is really a pain because its spending time executing a function without all of the rows that is suppose to have, so it will run again.
    I think the problem here is how ADF does the selections for the function but i don't know how to change it.
    Any ideia of why is this happening? What can i do to correct this?
    Regards,
    Frederico.

    Hey Frank,
    I mean that my function onDimProjectSelect has other functions inside that need to be executed so when i say that is runs all the functions i mean the functions that are suppose to execute when onDimProjectSelect is executed.
    Maybe the problem is my implementation approach but it was required to use the selection. But the funny part is that i select with the shift-click and he knows that, since it will run the function with all the rows that are selected but firstly he will execute the function with just the first selected row.

  • Listing all the populated variables when a swf is loaded from an embed tag ?

    Hello,
    well, everything is in the title, I've been wondering how I
    could possibily do this for some time now.
    and all I tried or thought of went nowhere.
    I'd like to list all the variables an html embed tag passes
    on to the swf file called, whatever they are named and how many
    there is.
    <EMBED
    src="example.swf?var="varcontent",var2="var2content">
    it's not life-threatening, but I hate using things that work
    when I have an idea for things that would work better x)

    thanks, I didn't think it would be this simple to list all
    var in _root.
    the only issue remaining is the case where I have more than
    one url passed on to my swf file, and how to distinguish which one
    is the one to use, but that's not really feasible (and anyway I
    can't think of a case where more than one var would be passed to
    the swfs I work on, let alone populated with an url).

  • Get all the local variables

    Hi,
       I found several API calls to get/set the local variables, if i know the name of the variable. However, if i want to get the list of variables from locals, parameters etc., how should i be able to get this from "ThisContext".
    Thanks,
    Regards,
    Aparna

    Hi,
    This example may help
    http://sine.ni.com/apps/we/niepd_web_display.display_epd4?p_guid=BCB5C685D37F104AE034080020E74861&p_...
    Regards
    Ray Farmer
    Regards
    Ray Farmer

  • Getting all the members (variables, methods AND method bodies) of a java source file

    For a project I want to programmatically get access to the members of java source file (member variables, methods etc) as well as to the source code of those members. My question is what is the best method for this? So far I have found the following methods:
    Use AST's provided by the Java Source API and Java Tree API, as discussed in the following posts:
    http://today.java.net/pub/a/today/2008/04/10/source-code-analysis-using-java-6-compiler-apis.html
    http://weblogs.java.net/blog/timboudreau/archive/2008/02/see_java_code_t.html
    http://netbeans.dzone.com/announcements/new-class-visualization-module
    This has the disadvantage that the classes actually have to be compilable. When I look at the Netbeans Navigator view however, it provides me with a nicely formatted UI list, regardless of the "compilable" state of the class.
    Thus I started looking at how to do this... The answer appears to be through the use of tools such as JavaCC: https://javacc.dev.java.net/
    ANTLR: http://www.antlr.org/
    which are lexers and parsers of source code. However, since the Navigator panel already does this, couldn't I use part of this code to get me the list of variables and methods in a source file? Does the Navigator API help in this regard?
    Another route seems to be through tools such as
    BeautyJ: http://beautyj.berlios.de/
    which run on top of JavaCC if I am correct, and which has the ability to provide a clean view on your java code (or an XML view). However, BeautyJ does not seem to be too actively developed, and is only j2se1.4 compatible.
    I hope someone can shed a light on the best way to go about what I want to achieve. Somebody already doing this?
    (I crossposted on the Netbeans forums too, hope this is OK...)

    I'm currently developing a LaTeX editor(MDI) and I do the same thing, but I don't know what exactly do you need.

  • Getting message 'ipod cannot be synced because there is not enough free space to hold all the selected items' when trying to sync both ipod and iphone.

    Recently downloaded new itunes when laptop upgraded from Vista to Windows 7. Tried disconnecting and resyncing but that does not work.
    The bar across the bottom of my itunes is not full for either device & I don't have an unusually high amount of 'other' on either device.  I am only trying to sync the same amount of music etc as I had before the new itunes, so it should fit onto the devices no problem.  There are no duplicate songs in the new itunes.
    Completely stuck!

    I suspect the upgrade has confused the mechanism by which iTunes compares what is on the device already with what your sync options imply will be added. In each case backup the device and then immediately restore the device from its backup. I take it all media is in the library and you're not getting erase & sync messages. Otherwise, or if you sync any contact information, then take a look at Recover your iTunes library from your iPod or iOS device for some tips.
    tt2

  • Selected variable value is different from the displayed value

    Hi all,
    I have an issue with variable selection in portal. I have a IO - customer which is compounded to source system. So I have soem customers with the same key with different sources. And I have a variable created on customer. For ex - i have 3 customers like below. 
    SA/1234567
    BP/1234567
    F5/1234567
    1 - And when I search for a customer 1234567 - I find only one customer that is SA/1234567. And IO properties are set to read all the masterdata values and not infoprovider or posted values.  - thats issue one - I would like to see all the three and let the user select what ever he wants.
    2 - Now when I select SA/1234567 and run the report. It shows me data for F5/1234567 - which is correct data for that customer. But in the template I have a info field web item to display the selected variables on the screen. That info field shows the Customer as BP/1234567 - which is wrong and confusing. I checked the properties of the web item and everything seems ok.  So in the variable screen I get a value, the result set if of another value and the variable value that shows in the Info tab is another customer. - Driving me nuts
    3 - When I recreate the same scenario in 3.x query - everything works the way they should - this only happens in 7.0 query. What am I missing here??
    Any pointer or insight is appreciated - sorry for the long post.
    Voodi
    Edited by: voodi on Jun 8, 2010 2:26 PM

    Sorry - its not how its displaying the values rather what its displaying - it misses on 2 other values from the three - though the Bex setting in IO are set to read all the values from materdata table. And in the query I'm using IO properties. And display settings are ok

  • How to find the select statement has written all selected values into text

    Hi,
    I am using form6i. i am selecting a set of values from database tables based upon some user parameters and writing into the text file using Text_io.put_line . In this case how we can make sure that the text fille contains all the data what we are selected from selected statement. somebody told that there might be chances of aborting of data while writing into the text file. is there any way to fild out the selected statements has written all the selected fields and corresponding output into the .txt file.
    Please suggest me.

    somebody told that there might be chances of aborting of data while writing into the text fileWhat kind of "chance" does that somebody refer to?
    If you want to verify if the number of records (lines) in the file matches the number of records from the cursor, you could re-open the written file in read-mode and count the number of lines by reading one by one, then compare the number of lines with the number of records from the cursor.

  • Select Lists - Setting and Referencing (Using) the Select List variable

    I have (a login page and) 3 application pages (call them Day, Week, Month), each with similar selection lists and a chart. I have three requirements.
    1) When a new selection is made, the value of the selection list variable is updated --that is, it does what select lists do.
    2) I need to set the value of the Month selection list variable before the Month page is rendered for the first time -- I need to give it an initial value.
    3) When navigating from page to page, say from Month to Week or Day back to Month, I need to have the value of the selection list variable carried to the new page from the value on the previous page.
    It sounds simple to me -- something that one could do with an (global) application item. The logic would be like
    IF :Page_Name_Flag = 'Week' THEN -- staying on the Week page
      SELECT :WK_SelectList_Name INTO :GLOBAL_SelectList_Name FROM DUAL
    ELSE -- new pass on this page
      SELECT  :GLOBAL_SelectList_Name INTO :WK_SelectList_Name FROM DUAL
      SELECT 'Week' INTO :Page_Name_Flag
    END IF;But that doesn't work for me. The page's select list variable seems to be NULL sometimes causing the value of :GLOBAL_SelectList_Name to be set to null. Other times, the copy from the global variable to page select list varable doesn't seem to change the page select list variable.
    At http://apex.oracle.com/pls/apex/f?p=43250:101 (guest/Ima9Gue8t) is an example where I have each page's select list working (except on the initial visit to the page, where the select variable is null!!!). How can I get the select list value on the new page to sync with the value from the previous page?
    Thanks,
    Howard
    Edited by: Howard (DBA in Training) on Sep 18, 2012 11:53 AM

    I'm closing this because I got it to work. In the end, it worked as I had described above. There was some setting of the Select List variable, that I now have correct, that was incorrect before. I wonder what it was?

  • How to add the key name to all the pictures selected

    I need to attach a key name to more than one picture and I cant , it remains attached to only one of the selected pictures. How to attach to all the selected pictures ? Tank you

    You may have the "primary only" flag enabled. Turn it off.
    To enable or disable the "Primary Only" flag, toggle the "Primary Only" button marked by a "1" in the Display Controls, or use the Aperture main menu bar:
              Edit > Primary Only.
    See my User Tip here:
    Keywords or ratings are applied only to one of the selected images - why?
    Regards
    Léonie

  • Script logic - how to use a selection variable within an allocation logic

    Hi,
    I want to implement a simple top-down distribution to distribute values from a yearly budget (Y20xx.TOTAL) to a quarter budget (Q20xx.Q1, ... Q20xx.Q4) using the actuals of the previous year as reference.
    If we hard code the members it works fine:
    *RUNALLOCATION
    *FACTOR=USING/TOTAL
    *DIM ACCOUNT WHAT=ACC_NOT_ASSIGNED; WHERE=BAS(FIN); USING=<<<; TOTAL=<<<
    *DIM TIME WHAT=Y2009.TOTAL; WHERE=BAS(Q2009.TOTAL); USING=BAS(Q2008.TOTAL); TOTAL=<<<
    *DIM CATEGORY WHAT=SBO; WHERE=<<<; USING=ACTUAL; TOTAL=<<<
    *ENDALLOCATION
    Of course, we want to make this dynamic, using the values inputted in the selection screen of the package: time, entity and category.
    So if we start with write the following logic, it does not work anymore:
    *RUNALLOCATION
    *FACTOR=USING/TOTAL
    *DIM ACCOUNT WHAT=ACC_NOT_ASSIGNED; WHERE=BAS(FIN); USING=<<<; TOTAL=<<<
    *DIM TIME WHAT=%TIME_DIM%; WHERE=BAS(Q2009.TOTAL); USING=BAS(Q2008.TOTAL); TOTAL=<<<
    *DIM CATEGORY WHAT=%CATEGORY_DIM%; WHERE=<<<; USING=ACTUAL; TOTAL=<<<
    *ENDALLOCATION
    So, how to use the selection variables in this allocation logic? %TIME%, %CATEGORY% also did not work ...
    regards
    Dries
    solved it ...
    Edited by: Dries Paesmans on Feb 22, 2009 8:31 PM

    Hi Dries,
    Looks like you solved this, but if I can just add a small point -- when you use syntax like this:
    *DIM ACCOUNT WHAT=ACC_NOT_ASSIGNED; WHERE=BAS(FIN);
    *DIM TIME WHAT=Y2009.TOTAL; WHERE=BAS(Q2009.TOTAL);
    each time the logic runs, it will scan through the dimension from the FIN and Q2009.TOTAL members, one level at a time, until it reaches the base members (where calc = 'n'). This may happen very quickly, if the dimension has very few levels, but could take a bit of extra time if it's a particularly deep dimension. (By which I mean many levels of hierarchy -- not some 1970's Pink Floyd musical reference.)
    You may speed things up by using a member property instead of the BAS(xyz). Flag all the base members using a specific property value, and that way the logic engine can pick up the complete list of members in the WHERE clause, in a single query.
    *DIM Account What=ACC_NOT_ASSIGNED; Where=[FloydProperty]="DarkSideOfTheMoon"; ...
    This adds some maitenance work in the dimension, which may be problematic if your admins are changing it regularly (and will cause problems if they forget to update this particular property).
    I can't predict how much time this will save you (maybe not much at all), but anyway I figure you'd want to know exactly what work you're asking the system to perform.
    Regards,
    Tim

  • Schedule Manager - Use of Selection Variable

    Hi all,
    My Question is "What is the use of Selection Variable settings in Schedule Manager screen?"
    I am not asking about defining selection variable in the variants to pick up values from TVARV table. My question is how I can make use of the Selection Variable(Extras->Settings->Selection Variable) in the Schedule Manager screen.
    The variable value column is ready for input in the Schedule Manager screen, is it possible to set the variant to pick up this value for the tasks in SCMA?
    Any help would be greatly appreciated.
    Thanks,
    Prabha

    Hi Prabha,
    After you have finished maintaining your variant, you would have to click on the "<b>Attributes</b>" button just below the title and maintain the description for your variant. Save this entry and press the back <b>green arrow</b>. Your save button would now be activated and you can save your settings now.
    I hope this helps.
    Do not forget to award the point please.
    Regards,
    Jacob

Maybe you are looking for