Unique Error while doing hot backup Cloning!
Dear All,
I am using EBS 11.5.10.2 with DB 9.2.0.6.
I am doing hot backup cloning by referring *[Cloning Oracle Application 11i /R12 with Rapid Clone - Database (9i/10g/11g) Using Hot Backup on Open Database|https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=760772.1]*
I am facing a unique issue, when I run adcfgclone.pl dbconfig <my_context_file>, application of my Production Server start misbehaving and it gives me an error:
Node Id does not exist for the current application server id.When I check the FND_NODE table I found that there server id was empty in it.
I have to run than run the following steps as the resolution:
1. Shutdown all the services.
2. EXEC FND_CONC_CLONE.SETUP_CLEAN;
3. COMMIT;
4. Run AutoConfig on all tiers, firstly on the DB tier and then the APPS tiers,to repopulate the required system tables.
5.start all the services and verify the issue.
Than application behaves normally.
Is there any additional step to be followed while Hot Backup Cloning other than mentioned in the above mentioned ML Doc?
Please suggest,
Anchorage :)
I am facing a unique issue, when I run adcfgclone.pl dbconfig <my_context_file>, application of my Production Server start misbehaving and it gives me an error:
Node Id does not exist for the current application server id.Where did you get this error?
This is very strange, how come this happens in Production, when you are doing cloning in TEST/DEV instance.
Is there any additional step to be followed while Hot Backup Cloning other than mentioned in the above mentioned ML Doc?I feel there are no other additional steps, as I Recently did successfully hotbackup cloning using the same document.
Similar Messages
-
Error while doing DB backup on issuing CA migration ?
Hi ALL,
I was trying to do a Issuing CA migration in one of my environment and I am getting the below error while trying to do backup of database
Error when doing dB backup:
After changing registry to point to backup folder and start services error changed to :
Any clue how to fix this error or way I should proceed with the Database Backup?Hi,
Are there any related error messages in the event logs?
Which way you used to backup CA database, is it CA snap-in or Certutil.exe?
Please try to use the different way than you have already used to backup database to see if it works:
AD CS Migration: Migrating the Certification Authority
http://technet.microsoft.com/en-us/library/9aa53be9-0497-49fa-9ff6-09b72cb69444(v=ws.10)#BKMK_BackUpDB
Best Regards,
Amy Wang -
Updating iphone 4 to iOS 5 - while doing the Backup I receive an error message no 402636788 - backup has failed. Can anybody tell me what this means or how I can fix this?
I am working on a Win 7 Machine and I have disabled all Firewall and Antivirus Tasks as this caused problems on an other update.Well - I synced before - that was successful - but I am a bit scared to ignore this error and just to continue? You think I should ignore that?
-
RMAN & Hot backup cloning taking long time
Dear DBAs,
We are doing both RMAN & Hot backup cloning foe that taking more time to restore data files to TEST instance. scp taking too much time to copy to target server because of its volume of data (1.5 TB) & Mounting the RMAN backups drive on test server and restoring from that drive taking more than 8 hours.
I heard that some companies are using some device to move heavy volume Hot backup copy from source to dest faster for clone the instance easily with in minutes. What is that device name to take hot backup copies from source and restore it in target server.
Test server Specs
Processor 8 cores with 32GB Memory.
Thanks
DBAHot backup is not recommanded for the database size more than 1T.
RMAN backup and restore is the only opiton available for a DBA.
Other option is to use EMC Symmentrix/BCV's/Snapshots. EMC uses pair of disks to achive synch the produciton data with test server. read more about EMC symmentrix or ask your storage team. -
HI i was doing the hot backup cloning in ebsr12.
i have backed up the control files and datafiles and the trace file also.
i have done the steps till copying the db and apps tier.
next is
2) Create the target database control file manually
Open the backed up control file
a. remove all lines before the startup nomount statement
b. Modify the REUSE to SET
c. Modify Source DB SID to Target SID (Here PROD to TEST)
d. Modify NORESETLOGS TO RESETLOGS
e. delete all lines after the CHARACTER SET statement
i am not sure about editing the control file ....
I am a started in db's
can anyone help me in this?HI i was doing the hot backup cloning in ebsr12.
i have backed up the control files and datafiles and the trace file also.
i have done the steps till copying the db and apps tier.Looks like you are doing cold backup and not hot backup! Was the database cleanly shutdown before copying the database files?
a. remove all lines before the startup nomount statementCorrect -- Or you could leave those lines if they are commented.
b. Modify the REUSE to SETCorrect.
c. Modify Source DB SID to Target SID (Here PROD to TEST)Correct.
d. Modify NORESETLOGS TO RESETLOGSCorrect.
You will also have to change ARCHIVELOG to NOARCHIVELOG -- If your source instance is in ARCHIVELOG mode.
e. delete all lines after the CHARACTER SET statementKeep the lines/command that open the database and create the temporary tablespace.
Thanks,
Hussein -
Hot Backup cloning vs Cold Backup CLoning
Hi,
when we do cold backu cloning...we get same data as production database..
when we do hot backup cloning..i think we will loose current transactions which are recorded in redo log and not archived ....am i right?????
when we do hot backup cloning....all the database files headers are freezed..means...all latest changes are not copied while we copying datafiles to test machine...but those changes are logged in archived log files...we will get these changes in archived log files...
am i right?????
please correct me if i am wrong.....When all is said and done there is really no difference in the clone database made from a cold backup or a hot backup as both are point in time recoveries.
In the case of the cold backup the source database was made unavailable to users while the backup was taken. If you have that luxary then that is fine, but many sites would need or want to keep the source available while the backup runs.
The backup type should not be an issue unless you really need to capture the source database with the data in a specific known state where no changes were taking place.
IMHO -- Mark D Powell -- -
Error while doing ABGL Asset Credit Memo
Hi Friends,
I am getting the below error while doing Asset Credit Memo in ABGL. Please help me in fix this issue.
Balance for transaction type group 10 negative for the area 01
Note:In Asset Explorer Fiscal year start Asset value is 98,425.45 and Change is 4768.19. So total Asset value as of now is 1,03,193.64.
Now we are trying to do ABGL with 12,790.23 value (Transaction type is 105). System is giving the above highlighted error.
If we give the amount 4768.19 in ABGL transaction, system is not giving any error. If we give more that that system is giving error.
Why system is giving error even the asset has balance of 1,03,193.64? Please help me on this..
Thanks
SunilHi,
If the asset has been capitalized during earlier years, use ABGF to post credit memo. ABGL is meant for assets capitalized during the year.
Best Regards,
Madhu -
Error while doing "Visulaize Plan"
Hi,
Before i did Visualize plan many times without any problem.Now I am getting error while doing so.
I was able to run "Explain Plan" successfully.
I am on HANA revision 60.
I saved above error log and the log information is given below:
I can identify invalid XML tag <TablesInvolved><![CDATA[raj/AN_VIZ]]></TablesInvolved> but how to fix this issue?
I gone through various blogs related to Visulaization Plan but not found related to this issue.
<Plan xmlns="http://www.sap.com/ndb/planviz" ID="ID_0" Type="Estimated">
<SQL><![CDATA[SELECT KOKRS, BELNR, PERIO, SUM(MEGBTR)
FROM "_SYS_BIC"."raj/AN_VIZ"
GROUP BY KOKRS, BELNR, PERIO]]></SQL>
<CompileTime>
<Start Unit="us">1401281467643661</Start>
<End Unit="us">1401281467658329</End>
</CompileTime>
<RootRelation ID="ID_0" TypeName="PROJECT" Status="Finished">
<Name>Project</Name>
<ExecutionType>Row Search</ExecutionType>
<Summary><![CDATA[raj/AN_VIZ.KOKRS, raj/AN_VIZ.BELNR, raj/AN_VIZ.PERIO, SUM(raj/AN_VIZ.MEGBTR)]]></Summary>
<Location>hanasp7:30003</Location>
<EstimatedCost>
<Exclusive Unit="us">2.12902e+06</Exclusive>
<Inclusive Unit="us">2.64021e+06</Inclusive>
</EstimatedCost>
<EstimatedOutputCardinality>648284</EstimatedOutputCardinality>
<Details><![CDATA[{"Projected Cols":"raj/AN_VIZ.KOKRS, raj/AN_VIZ.BELNR, raj/AN_VIZ.PERIO, SUM(raj/AN_VIZ.MEGBTR)","Project column0":"NString(4, 0) __trex_field_NVarchar3__() ....... [3]:040:<5/7 (16B)>:
/1/ void* \"__rids__\" ....... [0]:NOP:<0/1 (8B)>:
/2/ int32_t(10, 0) const := 0 ....... [1]:LOAD:<3/4 (4B)>:
/3/ int32_t(10, 0) const := 0 ....... [2]:LOAD:<4/5 (4B)>:","Project column1":"NString(10, 0) __trex_field_NVarchar3__() ....... [8]:040:<5/7 (16B)>:
/1/ void* \"__rids__\" ....... [5]:NOP:<0/1 (8B)>:
/2/ int32_t(10, 0) const := 0 ....... [6]:LOAD:<3/4 (4B)>:
/3/ int32_t(10, 0) const := 1 ....... [7]:LOAD:<4/5 (4B)>:","Project column2":"NString(3, 0) __trex_field_NVarchar3__() ....... [13]:040:<5/7 (16B)>:
/1/ void* \"__rids__\" ....... [10]:NOP:<0/1 (8B)>:
/2/ int32_t(10, 0) const := 0 ....... [11]:LOAD:<3/4 (4B)>:
/3/ int32_t(10, 0) const := 2 ....... [12]:LOAD:<4/5 (4B)>:","Project column3":"Decimal(18, 3) __typecast__() ....... [23]:076:<10/12 (16B)>:
/1/ Fixed16(18, 3) __trex_field_Fixed16__() ....... [19]:043:<6/8 (16B)>:
/1/ void* \"__rids__\" ....... [15]:NOP:<0/1 (8B)>:
/2/ int32_t(10, 0) const := 0 ....... [16]:LOAD:<3/4 (4B)>:
/3/ int32_t(10, 0) const := 3 ....... [17]:LOAD:<4/5 (4B)>:
/4/ int32_t(10, 0) const := 3 ....... [18]:LOAD:<5/6 (4B)>:
/2/ int32_t(10, 0) const := 18 ....... [21]:LOAD:<8/9 (4B)>:
/3/ int32_t(10, 0) const := 3 ....... [22]:LOAD:<9/10 (4B)>:"}]]></Details>
<Child ID="ID_8" >
</Child>
</RootRelation>
<Relation ID="ID_8" TypeName="TREX_SEARCH" Status="Finished">
<Name>Column Search</Name>
<ExecutionType>Column Search</ExecutionType>
<Summary><![CDATA[Aggregation on a single table]]></Summary>
<Location>hanasp7:30003</Location>
<EstimatedCost>
<Exclusive Unit="us">511194</Exclusive>
<Inclusive Unit="us">511194</Inclusive>
</EstimatedCost>
<EstimatedOutputCardinality>648284</EstimatedOutputCardinality>
<TablesInvolved><![CDATA[raj/AN_VIZ]]></TablesInvolved>
<LogicalPlan ID="ID_11" Type="Estimated">
<RootRelation ID="ID_11" TypeName="PROJECT" Status="Finished">
<Name>Project</Name>
<EstimatedCost>
<Exclusive Unit="us">0</Exclusive>
<Inclusive Unit="us">0</Inclusive>
</EstimatedCost>
<EstimatedOutputCardinality>648284</EstimatedOutputCardinality>
<Child ID="ID_12" >
</Child>
</RootRelation>
<Relation ID="ID_12" TypeName="GROUP_BY" Status="Finished">
<Name>Aggregation</Name>
<Summary><![CDATA[raj/AN_VIZ.KOKRS, raj/AN_VIZ.BELNR, raj/AN_VIZ.PERIO\nSUM(raj/AN_VIZ.MEGBTR)]]></Summary>
<EstimatedCost>
<Exclusive Unit="us">0</Exclusive>
<Inclusive Unit="us">0</Inclusive>
</EstimatedCost>
<EstimatedOutputCardinality>648284</EstimatedOutputCardinality>
<Details><![CDATA[{"Grouping Cols":"raj/AN_VIZ.KOKRS, raj/AN_VIZ.BELNR, raj/AN_VIZ.PERIO","Aggregation Cols":"SUM(raj/AN_VIZ.MEGBTR)"}]]></Details>
<Child ID="ID_13" >
</Child>
</Relation>
<Relation ID="ID_13" TypeName="TABLE" Status="Finished">
<Name>Column View</Name>
<Schema><![CDATA[_SYS_BIC]]></Schema>
<ObjectName><![CDATA[raj/AN_VIZ]]></ObjectName>
<Location>hanasp7:30003</Location>
<EstimatedCost>
<Exclusive Unit="us">0</Exclusive>
<Inclusive Unit="us">0</Inclusive>
</EstimatedCost>
<EstimatedOutputCardinality>682404</EstimatedOutputCardinality>
</Relation>
</LogicalPlan>
</Relation>
</Plan>
Regards
RajHi,
To solve this you must update your studio. In lower studio versions (PlanViz) does not allow "unknown" XML tags sent by higher version servers. A fix for this issue was made so that PlanViz parser can simply skip unknown tags.
Please go to version 74, if possible.
Regards,
Michael -
Error while doing EHP4 upgrade in downtime phase
HI .
Iam facing the below error while doing the EHP4 upgrade , in downtime phase.
Checks after phase MAIN_SWITCH/STARTSAP_TRANS were negative!
Last error code set: RFC call to subst_get_uvers failed with key RFC_ERROR_COMMUNICATION (open): SAP_CMINIT3 : rc=20 >
Connect to SAP gateway failed Connect_PM GWHOST=Hydhtc4526D, GWSERV=sapgw04, SYSNR=04 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR partner '10.136.162.30:3304' not reached TIME Mon Jun 06 18:17:46 2011 RELEASE 720 COMPONENT NI (network interface) VERSION 40 RC -10 MODULE nixxi.cpp LINE 3286 DETAIL NiPConnect2: 10.136.162.30:3304 SYSTEM CALL connect ERRNO 10061 ERRNO TEXT WSAECONNREFUSED: Connection refused COUNTER System start failed
Please help me in resolving this error.
Sanketh.Hi,
Upgrade tool is trying to start the system but system is not coming up. Try to start system manually and see if system comes up or not. If not then check logs in work directory for why system is not coming up.
Thanks
Sunny -
Error while opening the backup information fom Maxdb
Hello All,
I am getting the below error while opening the backup information from Maxdb.
Backup history file /sapdb/data/wrk/<sid>/dbm.knl corrected in line <xxxx> ; 2012-02-21 07:30:25 can not be convert in to a signed 32 bit integer value
The full line is as below from the dbm.knl file:
4F4337C5014C|LOG_000030571|SAVE WARM|2012-02-21 07:16:03|2012-02-21 07:20:49|2012-02-21 07:20:53|2012-02-21 07:21:04|2605155691|2605244F433A01014E|LOG_000030573|SAVE WARM|2012-02-21 07:26:09|2012-02-21 07:30:24|2012-02-21 07:30:25|2012-02-21 07:30:41|2605326357|2605411689| |<SID>_LOG | 85344| 0| 0| |
I am able to open and check this line in the file dbm.knl ; But, i am not getting why this error is occurring while opening the backup information from Maxdb. I am able to view the backup logs through LC10.
Currently i am getting this error and when i am click on cancel (or ok) getting the blank page. I am not able to view the backup logs form Maxdb.
Please give me some hint to resolve this.
Regards,
Nagendra.Hi,
Use below procedure
1. Go to /sapdb/SRD/data/wrk
2. cp -rp dbm_knl dbm_knl_OLD
3. vi +<Line in which the corruption occured> dbm.knl
see there must be a corruption in the given line and it will specified with a green color
delete that part and make the format as per the above line
4. save the file
5. execute the procedure again from Database studio or Database Manager
(Note: Make sure that you have taken the backup first of dbm.knl file Because any extra entry may cause another corruption)
(FYI : This file is only log file of successful backups and returns the return-code)
Regards,
Paramvirsinh Jetawat
SAP BASIS Consultant -
Error while doing GR for scheduling aggrement
Dear Experts,
We are facing error while doing GR for scheduling aggrement.
we have done the following steps.
1) Scheduling aggreement in ME31L
2) Released in ME35L
3) Mainatined Sch.Agmt Schdule in ME38 for todays and date 200 qty and other line is 800 qty.
When we are trying to do GR in MIGO system is giving the following message.
Document 5500000152 does not contain any selectable items
can I know what I have missed in the above steps.
Please guide me to resolve this.
Regards,
PrasadHi,
Please check Please check if Gr is already done against this document. Also please check whether you have attached SA in the source list with line items.
T-code:ME01
Enter Mat.code & Plant.
In the next screen pl.do the following:
Valid from - commencement date of the SA
Valid to - End date of the SA
Vendor - Vendor on whom the SA is released
POrg - Your purchase organisation
PPL - Leave it blank(This is only for interplant)
OUn - Ordering unit
Agreement - SA number
Item - 1
I hope this will resolve your issue. Thanking you -
Error While doing ABT1N transaction
Hi,
I am facing the below error while doing ABT1N in Asset Accounting.Please help me in fixing this Issue.
Error Message -No depreciation area for receiving the revenue
Message no.AAPO149
Diagnosis
You tried to post a retirement on asset 1000 100007-0.You entered transaction type 300,in which the retirement with revenue indicator is not set
You tried to transfer asset 1000 100007-0.According to transfer variant 0001,none of the areas on the asset uses a transaction type for retirement with revenue
In both of these cases, you are not allowed to enter revenue or make specifications for the determination of revenue.
Proceedure
Check the transfer variant and check your entry
please do the needful
Thanks
SupriyaHello,
You will have a check box for the same.
Double click on transaction type, you will see the check box for revenue.
Otherwise, tomorrow I will get back to you once I am in front of the system.
Regards,
Ravi
Edited by: Ravi Sankar Venna on May 5, 2009 7:53 PM -
Error while doing F-90 Asset Acquisation
Hi,
I am getting the below error while doing F-90 Asset Acquisation scenario. Please help me to fix this issue.
Tax code V1 country IN does not exist in procedure TAXINN
Message no. FF713
Diagnosis
You entered a tax code which is not defined for the country of the company code to be posted to in the tax calculation procedure.
System Response
Procedure
Check and, if necessary, correct the entry.
Procedure for System Administration
If it is not an input error, check and possibly change the system settings.
To do this, choose Maintain entries (F5).
Check whether the company code is assigned to the correct country and whether the correct tax calculation procedure has been entered for the company code country.
Create a new tax code if necessary.
Caution:
Since it is possible that the tables in question are being updated at a different time on another computer, it can take a certain amount of time for the tax code to be on all local machines in client server architectures after saving the new code.
Thanks
KBHi,
you need to maintain Tax Code A0 & V0 in t.code OBCL t.code.
and also ensure to check whether you have created tax code V1 or not in FTXP t.code. If not, create V1 tax code and assign GL on that in the right Transaction event keys in OB40.
Try.... if not working let me know....
Regards,
MOhan. -
Error while doing AIAB Settlement
Hi I am facing the below error while doing AIAB during AUC settlement. Please do the needful.
Data for determination of capitalization not managed in area 01
Message no. AW507
Diagnosis
You have chosen a depreciation area, which does not carry the depreciation data from table COEPBR.
Procedure
Choose a different depreciation area.
Thanks
KCHi,
This message could be helpful:
Error AW507
Please check the field T082AVIEWB-AUTHORITY. If it is not on 2 this is the reason.
In this case, you can change the value in T093-VIEW1 using the coding as per SAP note 29706 which you have already discovered. There will be no risk involved in changing this value.
regards Bernhard -
Error while doing AUC Settlement in KO88
Hi
I am getting the below error while doing KO88. I have maintained the Allocation structure for FXA and given the cost element group in the Source field & Given FXA in Receiver category and selected By cost element option aginast Receiver category FXA in Settlement Cost Element field. I am getting the below error while settling in KO88.
Define a settlement cost element for receiver type FXA
Message no. KD506
Diagnosis
In allocation structure A1 (controlling area BP01), you did not define which cost element should be used when settling costs/revenues of the sender. Nor did you define receiver type FXA.
Procedure
Assign a different allocation structure to the settlement sender (-> Master data -> Settlement rule -> Goto -> Settlement parameters), or maintain allocation structure A1.
Please help me
Thanks
KishorePlease check your allocation structure , it looks that settlement cost element that you have assigned in the allocation strcuture is not having correct cost element category.
regards
Ranjan
Maybe you are looking for
-
Itunes - How do I change the startup browser to open itunes from Windows Explorer to Firefox. I changed my default browser to Firefox. Now itunes won't open and the error message is "Windows Explorer has stopped working."
-
Purchasing external HD and use with Time Machine
I've got an eMac, 1GB RAM, 1 MHZ processor (+/-), 40GB hard drive. Am considering purchasing Leopard upgrade and external FireWire HD. Existing internal HD is near capacity. Would like to move some files to external HD, such as iPhoto and iTunes. Wou
-
What's wrong with my Progress Monitor and how do I fix it?
Hello, My progress monitor fails to draw its insides, except when the task is already finished Inside a class that extends SwingWorker<Void, Void> ... @Override public Void doInBackground() throws Exception try this
-
how can i connect my vista pc and use my apple tv as a monitor??
-
Sign in link and adding a guest user.
I have added security for my web center application.Currently i have created a default pages(login.html and logout.html) for handling login and logout. Now i want signIn link on my every page.when a user clicks the link he should be navigated to logi