Unique id For System Message

Dear all,
   Any one can please tell me the unique id for System Message.  Also i want to know the unique id for 'yes' and 'No' in System Message. Its very urgent
Thanks in advance
with Regards
G.shankar

System message has formtype = 0. The Yes and No button has no ids for sap, but when you want to press one of this button, use sendkeys as SBO_Application.SendKeys("") or tab for No (default is Yes).
For accesing to correct system message, use some global variable and there before showing system msgbox set some value and compare it after showing.
hope it helps

Similar Messages

  • Table Name for System Messages

    Dear all,
    i want to know the Table name for system messages
    Reg
    Kris

    hello Hari,
    I am getting error's in Posting like:
    Error in posting
    Message no. ICC_TR119
    Diagnosis
    The system could not post any checks or bills of exchange.
    Procedure
    See the table with the system messages.

  • Settings for system message type in MM

    Hi,
       In spro--> Define Attributes of System Messages, there are many message types are there.
    If we see from the dropdown, many are not showing in the main screen but they still work in background when while doing transaction if some input is wrong.
    for example in purchasing, application area 06, message type 131- RFQ for vendor & already entered, is not appearing in the screen. but when we are created RFQ twice for the same message system throws error.
    Likewise many messages are there, even we donot maintain still they pop up.
    how we know which message we require to maintain in the screen and which not.
    like what example I have given works autonatically for transaction.
    I think there may be some messages where user doesnot have control at all, what ever way you set is either W or E, system determines how it is defined in programs.
    I table T100 more than 600 messages are there,
    can somebody guide me on approach to work with messages. It is quite confusing.
    regards

    Hi Pallavi,
    Actually some of the Messages are self explanatory in the application of the Programs.
    These W/E Messages are included in the basic programs of the Transactions which runs in background to execute the transactions, if a user makes any wrong entries which afffect the proper execution of the program the system will throw these messages which means  some data is not flowing properly.
    Go to SE91 and enter the Message class/Application area and you will find all the Message number related to that Application.
    At the end you will find one check box called self explanatory some of them will not displayed in the drop down list at Define attributes of system messages in IMG settings.
    So means you don't have the option to change these messages as per your requirement like Warning or Error messages.
    Hope you understand.
    rgds
    Chidanand

  • Trying to find support dates for System Messaging v6.0

    I was looking around on the Sun site to find whether System Messaging v6.0 is still under support or not. Can someone point me in the right direction or tell me what the support dates are for it?
    This is the actual REV level we have. Sun Java(TM) System Messaging Server 6 2005Q4 (6.0,REV=2003.10.29)

    Hm. As is stated in the header for this forum, the best way to get your version is to run:
    imsimta version
    and paste the results here.
    2005Q4 corresponds to version 6.2, and is supported. Many patches are available to the public at:
    http://sunsolve.sun.com
    The current version is part of the "communication suite 5", or Messaging Server 6.3.

  • Deactivate pop-ups for system messages

    Hi,
    I have the problem that each time a system message is occuring (bottom left hand corner) an information pop-up is raised with the text details. How can i deactivate these pop-ups? It's really annoying when you debug because each time  a commit is done by the system a pop-up is raised...
    Thanks in advance.
    Points rewarded of course.
    Regards,
    Laurent.

    Hi Laurent,
               Try this if it works
      Goto SAP Initial screen(Easy access screen)
      press ALT+F12
      Select first option "Options"
      In the Second block Messages , deactive the checkboxes if any checked
    I hope in ur case 2nd check box is checked

  • System message setting for delivery.

    Hi All,
    I need to set message VL 261 Free goods group not complete  as error message. I tried to do this setting at LE> shipping> system modification-->specify characteristic for system message.
    But when i am enter error message number 261 it is giving error " enter valid value". But when I am creating delivery I can see that message in log as information. can any one help on this.
    Thanks in advance.
    Regards
    Chetan

    Hi Chetan,
    for my understanding you can not switch "VL 261 Free goods group not complete as error message". If you look at the SAP customizing help you will see following information:
    "The maximum possible message category is predefined by SAP. For this reason some error messages only have a limited selection of message catogories that can be set. Use F4 Help to find the maximum possible message category from the sequence 'E', 'W', 'I', ' '."
    That means the message types predefined in customizing can be switched from error to warning and vice versa. BUT error messages not included can not be added or switched by customizing.

  • Widget for SM02 system messages.

    Hi Experts,
    Can some one help me creating widget for system messages. The requirement is for creating widget which pops up a message when there is some new message created in the bw system. We have BW 3.5 system.
    Currently we have a real time cube based on the background table of SM02 messages. We have made a report which displays the active system messages. This report is displayed in a widget. What we want is to hide this widget.
    Whenever there is a change in SM02 there should be a JavaScript pop up for the user displaying the new message.
    1. If there are no messages in SM02 then nothing needs to be done.
    2. Once a message is created then a pop-up comes up.
    3. One more message is created then pop-up comes up with both the messages.
    4. One or both the messages deleted then nothing needs to be done.
    I'll say thanks the sdn way...
    Regards,
    Sujit.

    please check
    Note 926124 - SM02: System messages are not displayed
    i am not sure abt this note but u can also check
    Note 1115177 - SM02: No system messages for new users
    Hope this will help you ...
    Reagards
    dEE

  • How to create system message in SAP EP?

    Dear All,
    How to create system message in SAP EP?
    i need to find solution for this task. Is there any way without collaboration? For example in SLD there is "System message" without additional functions. Please help.
    Portal installed on Netweaver 7.01 EHP1

    Hi Abay,
    You need to develop custom application to accomplished your requirement for system message in the potral.
    Please have a look at "Brodcast messages to logged on users in Portal:
    Brodcast messages to logged on users in Portal(Part1)
    Brodcast messages to logged on users in Portal(Part2)
    Also you can develop system message in the KM and integrate in the portal.
    Hope it will helps,
    Regards, Arun Jaiswal

  • Define system message attributes

    Dear All,
    How can i define system message attributes for master data , purchase recquisation configuration & many more (MM) pls give me in detail configuration part points must be rewarded
    Amin

    Hi Amin,
    To setup the system messages like Warning, Error you can go through like this,
    For Master data ---
    SPRO-- Log GenMaterial master-Basic settings -- Define attributes for system messages
    For Purchasing---
    SPROMMPurchasing--Environment data --Define attributes for system messages
    For Inventory mgmt & Physical inventory--
    SPROMMInv mgmt & physical inv--Define attributes for system messages
    For Logistics Invoice verification---
    SPROMMLogistics Invoice verification--Define attributes for system messages
    For external sevices mgmt---
    SPROMMExternal services mgmt--Define attributes for system messages
    Hope you understand this.
    rgds
    Chidanand

  • System messages Tcodes

    Hi,
         could you please tell me the Tcodes that contains SYSTEM MESSAGES.
        Like  for example Tcode OVAH.

    here are some of the Tcodes for System Messages
    OCHS                 Set system messages
    OMCQ                 Settings for System Messages
    OPKG                 Maintain Messages
    OVELO7               Assign Own Dialog Messages
    OVM1                 Controllable Error Messages Shipping
    Regards,
    Ramesh

  • Problem in system messages

    Hi Gurus
    I am creating a PO with refernce to the PR i am able to use the same PR which is been already ordered for the sbsequent new PO creation
    Though i have set the system messages
    06 099
    06 405
    06 421
    06 608
    to ERROR.
    When i am creating a PO with refernce to the PR i am not getting any error or warning message if the PR qty is already ordered in full.
    Is there any config to be done
    Sunil

    Go to SPRO-MM-Purchasing-Environment Data-Define Attributes for System Messages and Set the Following Messages numbers as Error and Save.
    06 076 Materials of requisition & item & alr. ordered in full
    06 608 Requisition already converted into purchase order & &
    06 648 Requisition quantity already ordered in full (see follow-on docs.)

  • Broad cast message in BW portal for system shutdown etc

    Hi All,
    we are using EP 6.0 and bw 3.5.There are times when the system is down,it is a tedious process to let all the users know about it by email.
    Is there any way like SAP to broadcast a general message that system is down or particular reporting area data is not right etc to global user group on logging on to portal.
    Thanks
    Sampath

    Hi Jeff,
    SM02 is used for creating messages in BW system.I tried a test message but I don't see them when I log on BW portal.
    Thanks
    Sampath

  • Background Processing? how schedule job for "System Error" Message .

    Hello everyone,
    in sap help i have read.
    http://help.sap.com/saphelp_nw04/helpdata/en/5a/f72040599a8f5ce10000000a155106/frameset.htm
    PCK> Monitoring>Message Monitoring-->Background Processing
    you can schedule jobs for various background processing:
    ●     Archiving of messages processed successfully
    ●     Deletion of messages that are not to be archived
    ●     Restarting of messages with errors
    ●     Rescheduling of lost messages
    can anyone understand this docu?
    give me some introduction, how can i define and schedule these jobs ?
    thx in advance!!
    best regards
    Yaning

    Background Processing
    Prerequisites
    You have started the message monitor on the initial screen of the PCK and are in Background Processing.
    Features
    Archiving
    You require two archiving sessions to archive messages:
    ●     One session to write the messages to the archive
    ●     One session to delete the persisted messages that have been archived
    To do this, you schedule an archiving job, which implicitly schedules the sessions to write to the archive and delete the archived messages.
    You can define one or more rules for each archiving job; these rules contain conditions that a message must meet in order to be archived by the job. At least one of the defined rules must be met for archiving to take place.
    All information that is displayed for a message in message monitoring is archived, in addition to the audit log for each message.
    Deleting
    A standard delete job is created automatically. It runs once a day. You can schedule additional delete jobs; however, you cannot define rules for them.
    Restarting
    Instead of restarting messages with errors manually with message monitoring, you can schedule a job to automatically restart these messages. This is possible for all messages for which the number of defined restart attempts has been exceeded (messages with the system error status).
    You can define one or more rules for each job to restart messages; these rules contain conditions that a message must meet in order to be restarted by the job. At least one of the defined rules must be met for archiving to take place.
    Rescheduling
    A standard job to reschedule messages is created automatically. The job runs once a day and ensures that messages lost as a result of database failure, for example, are rescheduled. You can schedule additional rescheduling jobs; however, you cannot define rules for them.
    Thx Aamir.
    But I mean the messages with errors in Adapter Engine , not in Intergrations Engine.
    the situation is like Naveen Pandrangi's WebLog
    II. Errors in Adapter Engine [XI :  How to Re-Process failed XI Messages Automatically|XI :  How to Re-Process failed XI Messages Automatically]
    I
    Till now we have seen how to resubmit/restart message that failed in Integration Engine.  One a message makes it from Integration Engine to Adapter Engine, the message is flagged as checked in Integration Engine. The status of the message in Adapter engine does not effect the processed state in Integration Engine. Now if this message was asynchronous, XI will by default try to restart the message 3 times at intervals of 5 minutes before the status of the message is changed from Waiting to System Error .
    *how can i schedule a job to automatically restart these messages with errors?
    best regards
    Yaning
    Edited by: Yaning Liu on Aug 18, 2008 1:43 PM

  • System message:Procurement of material&blocked for quality reasons(0006 883

    Hi Greetings!
    I have the following issue.
    I need to make the message "Procurement of material & blocked for quality reasons" as Error message . Message number - 00 06 883.
    This will not allow to create PO , if the "Blocking Function" - 02 "Block Request and Purchase order " is set in the QM info record.
    Even though i ahve set this message as "Error" in the configuration ( Materials Management --> Purchasing --> Define Attributes of System Messages), i am getting only warning message during PO creation.
    Can you please let me know if am missing any setting.
    Gobinathan G

    Dear sir,
    GO to material master of that item go to .. PURCHASING VIEW there is a Plant specific material status chk if that is 01- blocked for production 02- blocked for BOM chk and change it then system will allow you to purchase the parts.
    Kaustubh

  • Configure plain http adapter for receiving message from an external system

    Hi,
    we use Pi/700.
    Now I have an external system and I have to use HTTP (plain) to send messages to XI (via plain http adapter).
    I have no experiences with HTTP!
    In the external system I can only configure "URL, Username, Password" for sending messages - that's all!
    What do I have to configure in XI (communication channel, abap-stack, java-stack,...)?
    I don't know the URL of my XI-system. Is there an transaction code to get this information?
    Why do I need a Username/Pasword?
    For testing I can use a "http-post test tool" I found here in this forum.
    Thank you all for any help!
    Regards
    Wolfgang

    Hi Hummel,
    In Exteranl System u have to use these values
    name="myhost"      value="xiserver"
    name="myport"      value="8000"
    name="mysystem"    value="XY_BSservice"
    name="myinterface" value="Order_out"
    name="mynamespace" value="urn:xi:hcl:powebapp"
    name="myqos"       value="BE"
    name="myclient"    value="300"
    name="myuser"      value="XYZCLNT"
    name="mypass"      value="xiuser"
    Here My system is the Business service created in Integration directory of XI, Interface is the one created in Integration Repository (This is Outbaound from external sys to XI)
    In XI U have to create
    Data Types : 1) Source Structure data type(from extenal sys)
                 2) Target structure (where u want to send from XI)
    Message Types : 2 with above DT's
    Message Interface: 1) Outbound, Async (Order_out)
                       2) Inbound , Async (for the target sys)
    Then Message mapping and Interface mapping as usual..
    And in ID u have to create 2 services one is XY_BSservice for sending system and the other is for receiving system...
    For sending system no communication channel required...
    Hope u will get idea from the above..
    Need any further u r welcome..
    Regards
    Sridhar

Maybe you are looking for