Unistall-reinstall itunes
I recently purchased a Iphone. i have a hard drive that is partitioned into a C and D drive. I only have 4.8Gb left on my C, but have 145Gb on my D. I try to remember just to install all programs on the C, but when installing itunes, i forgot and had my music save to the C as well. Can i uninstall from my C and reinstall to my D without losing all the downloads, music, etc..?
OR Can i install just the program to C and point all my downloads, music, etc.. to D without losing any of them?
Yes, install the program to C and set itunes preferences > Advanced tab to put the music and other content on D.
Similar Messages
-
My iTunes opens fine if it is the first time I have opened it since turning my computer on. If I close iTunes, however, it won't open again unless I restart my computer. No error message appears. Clicking on both the shortcut and file in iTunes folder does nothing. I unistalled iTunes and reinstalled it but the issue hasn't gone away. A virus scan has come up with nothing. I would appreciate any ideas that might help to fix this issue.
Having the same problem - am running Win 7 Pro 32 bit. Discovered that when you close iTunes task manager shows that iTunes.exe is still running and will not close unless you reboot. I have also found that after starting Win 7 that if I launch iTunes by inserting a CD, the CD plays and displays all tracks correctly. However, if I eject the CD and insert a different one neither Win 7 or iTunes recognises the CD. These problems seem to have started with the release of 10.5.2 - prior to that no problems at all. Have tried reinstalling and it does not make any difference.
-
When I connect my ipod to my computer it opens my documents and won't show up in my itunes and I have unistalled then reinstalled itunes and reset my ipod twice and it stills does the same thing how can I make it so that it shows up in my itunes?
Try
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
Before you reinstall the Apple software, also remove iCloud vi Control Panel Remove programs. The reinstall the Apple programs
New cable and different USB port?
Runs this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Try on another computer to help determine if computer or iPod problem -
Despite trying to unistall and reinstall iTunes, I continue to get the message "the program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem."
Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99385) -
i have a system error when trying to open my itunes on my laptop. Should I unistall and reinstall itunes?
The first error comes when i open my laptop:
APSDeamon.exe - System Error
The program cannot start because MSVCR80.dll is missing from your computer. Try reinstalling....
when I try to open Itunes, it says:
iTunes.exe
iTunes was no installed correclty, please re-install itunes
Thanks!
Annabel -
Cannot unistall and reinstall itunes in windows xp
When I try to open my itunes it asks me to put a disk in drive F. Drive F is a dvd player in my computer.
When I try to unistall itunes from control panel it does not work and is reffering to itunesminiplayer resources is missing or is not a valid short file name.Keanu's right that this one responds well to the use of the Windows Installer CleanUp Utility. Unfortunately, Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25 2010. First we have to find a copy of the utility.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. (The results from mydigitallife and Major Geeks are worth checking.)
After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove".
Quit out of CleanUp. Restart the PC, and reinstall iTunes. Does the install go through properly? If so, can you open iTunes without the error message now? -
Cannot access itunes store from itunes - says to check internet connection. I have internet connection. I've unistalled ALL itunes files and associated files, and reinstalled?
Try this:
1. Settings>General>Date & Time>Turn off set automatically
2. Set date one year ahead
3. Go back to iTunes and try again.
4. You will get the same error.
5. Go back to settings general date and time and turn back on 'set automatically'
Try connecting to iTune Store again. -
Please help me. I have an Ipod Shuffle and Ipod Nano both the latest versions. I can not get them to communicate with my ITunes. I have tried the troubleshooting and I have tried completely taking all Apple software off my computer and reinstalling Itunes. I could really use someones help. My ITunes keeps telling me reinstall Itunes to correct a software problem, but I have reinstalled it three times and the issue has not been corrected.
Thanks a bunch in advanced!I cannot find "Other" devices. I found Apple Mobile Device under Universal Bus Controllers but cannot see "recovery mode" or any other status. I use Windows Vista.
When I try to restart Apple Mobile Device Service I get the following message: "The Apple Mobile Device Service on Local Computer started then stopped. Some services stop automatically if they are not in use by other services or programs". What does this mean?
During the last 48 hours I was able to see my iPad in iTunes only one time during many attemnpts to connect . I haven't been able to see it during the llast several attempts.
Any suggestions? The standard suggestions have not worked: i.e. stop then start AMDS; tuurn off iPad and PC, then restart both and reconfrom iPad to PC; reload iTunes. -
After installing itunes on my pc i get an error that says that i have to uninstall and reinstall itunes. I finally got it to down load and now it says that I need an upgrade. It's getting very frustrating as I've never had this kind of trouble.
What is the precise wording of the message that is appearing?
What OS is on the computer? -
Unistalling and Reinstalling iTunes
I have an HP, and a long while back, my CD drive failed. So I went on a help site to fix it, and it works now. The problem is, before iTunes opens, it gives a message that says
"Warning!
The registry settings used by the iTunes drivers for importing and burning CDs and DVDx are missing. This can happen as a result of installing other CD driver software. Please reinstall iTunes."
It will import some CDs, but I can't burn them.
I want to reinstall iTunes, but I don't want to lose all my music! What do I do?Just reinstall it. Back up as soon as you can.
(56942) -
I just updated iTunes to the 11.1.4.62 (as the pop up directed me to) on my Windows 8 machine. As a result iTunes will no longer recognize my 5th generation Ipod Nano (yes two). I receive a pop up saying "Ipod has been detected but could not be identified properly" I've followed the recommendations seveal times: a) disconnected and reconnected. b) rebooted computer c) unistalled and reinstalled iTunes d) tried different cables e) tried different USB porst f) rebooted Ipod.... the window keeps popping up like a middle finger (you get the point)
iTUnes WILL however, recognize my 4th gen Nano and my 80gb Video (classic) without problem
Needless to say, I'm frustrated and ticked off over all of this wasted time.
Anyone solved this issue yet?
Any good suggestions?
Please advise
Kindest regards,c) unistalled and reinstalled iTunes
Doublechecking. Have you also tried a complete uninstall of both iTunes and all the other related software components and then a reinstall? If not, try the instructions from the following document:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8 -
I am trying to install itunes on my pc again but keep getting an error that says'apple application support was not found. try reinstalling itunes.' error 2.
We have had itunes on this pc for 2 years and recently it wouldn't open and another error message kept popping up saying it couldn't open because MSVCR80.dll was missing. I have unistalled the apple programs and tried reinstalling several times but to no avail. Hopefully my music library is not gone. Any Ideas out there?With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.) -
To get my Iphone 4 to show up in iTunes, I have to uninstall iTunes and then reinstall it EVERY single time I want to connect my device to iTunes. I've tried just using a wi-fi connection and that won't work. It's very annoying to have to go through all that trouble of uninstalling and reinstalling iTunes every time that I need to connect to my iTunes account. I first got this phone in Germany when I was visiting my uncle who was stationed there, he had got the phone from AT&T here in the U.S. while in Germany connecting to his computer to itunes was no problem, it'd connect without any issues. Then when I came home back to the states, my phone would no longer connect to itunes on my computer unless I unistalled and reinstalled, but my computer does recognize my device when I connect every time just itunes does not and I don't understand why it's doing that. Is there any way to fix this? How can I get my device to show up in itunes without having to reinstall it every time?
The ipod is not a backup device. The music sync is one way - computer to ipod. the exception is itunes purchases. Without syncing: File>Transfer Purchases
Copy everything from your old computer, or your backup copy of your old comptuer, to your new one. -
When starting iTunes I continually get an error message " The registry Settings used by the iTunes drivers for importing and burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes." I have unistalled and reinstalled iTunes several times and have cleaned up the registry using a 3rd party Windows utility. Any tips on removing this error message for good?
I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes -
I am using OS 64 bit Windows Vista Home Premium and recently updated the latest version of iTunes. (I only have this CD burning software on my Laptop). Ever since updating, I received the message 'Registry settings for the iTune drivers are missing for CD burning'. The drivers for Lower and uppper filters in the registry are missingand I now have no optical drive. I have unistalled and reinstalled Itunes and manually entered the filters. Have tried everything including something called GEAR driver installer which was suggested on several technical sites. Everything was working fine in iTunes until I updated it.. It's strange I can still import music but not burn?? Friend s have told me they have ha dthe same problem when updating iTunes but resolved the problem by uninstalling/reinstalling or altering registry keys.
Today I went to use my Epson Printer and now have problems with it not working. I decided to uninstall/ install printer software and still can't get it to work either. I may be wrong but his all seems connected to me?
I have been trying for days to get telephone support and been told today you have to pay
Please can someone help me before I throw the lot out the window!!!!Many thanks b Noir
This is a copy of ONEof the keys in the registry I changed as told by Apple support today. I also have changed others as instructed by GEAR software support to manually delete GEAR drivers (that I had installed but couldn't delete some of the others they mentioned from Windows system 32. Then some bright spark at work told me I need the Gear drivers so I downloaded the software and installed again.
Sorry, just this minute went to insert image and it is giving me a message saying this sort of content is not allowed?.
The most recent key I altered is in: HKey _local _machine. System\class - 4D36E965-E325-11CEBFC1-08002BE10318. Upper Filter data: Upper filter NTIDrvr SiRem GEARAspiWDN.
The GEARsoftware info about manually deleting GEAR drive is from:
http://www.gearsoftware.com/wiki/index.php?title=DRIVERS:_Windows_-_Updating%2C_ removing%2C_64_bit_versions%2C_etc
I hope you can help
Maybe you are looking for
-
It seemed to me as a common problem with Inspector..
..what I wanted to do is to synchronize an image file with an mp3 file and upload it to youtube. I've managed to export the file as a quicktime .mov file, but there were pops and clicks in the audio. After some searching I've found a possible solutio
-
I want to delete photos in the icloud from my pc and i,m following and understand the instructiones from your system, but in every time i must read a message - there is a problem with the server connection. What is the solution or when will be solved
-
How to receive acknowledgement from Vendor via SOAP adapter.
Hello Experts, my outbound scenerio is R3>PI->Vendor via the URL given by vendor. From PI i'm sending my POs via SOAP adapter and in the conversion parameters I choose the check box "Do not Use SOAP Envelope" My message reached the vendor. Now vendor
-
Display multiple pages of PDF in ABAP webdynpro
Hi Friends, We have a requirement, where we have to display all the pages of PDF in ESS Portal using Abap WD. I have got the xstring data for all PDF pages. How can I display them now? I used interactive form, but it can display just one page. I
-
My macbook pro will not shut down. It tells me that safari has cancelled shut down and to quit safari and try again, but every time I try to quit safari it won't let me. I need help...I don't know what to do.