Unistalled CS3 now CS6 can't recognize files

Had CS3, CS5 and CS6 installed on hard drive, wanted to remove CS3 to save some space, used the proper add/remove and all my CS6 files are no longed associated with CS6.
File association no longer recognizes my InDesign files, the only option it gives me is ID CS5, and even if the document was created in CS6 it tries to open CS5 and gives an error.
Since CS6 and CS5 executible are both named InDesign.exe it wont add another file association for CS6 if I try to associate it manually.

Creative Suite Cleaner Tool
Run it, and in addition manualyl clean out your Windows file associations, then reinstall CS6. You made a mess.
Mylenium

Similar Messages

I am trying to update my itunes and iphone. Everytime I trie comes out a message about 'key access'. I've done all the steps from the support and nothing worked out. I cannot unistall and now I can't open it anymore also. What should i do, please?

I am trying to update my itunes and iphone. Everytime I trie comes out a message about 'key access'. I've done all the steps from the support and nothing worked out. I cannot unistall and now I can't open it anymore also. What should i do, please?

Isn't that only used when a PC will not boot?
What options does booting with this give me?
Thanks
JK MCP
Hi,
USB recovery disk was used to recover your system when it encounter problem. You can try to use it to fix your problem instead reinstall system. However, there is no method to keep your program whenreinstall system.
Roger Lu
TechNet Community Support

I am trying to send a PDF. It says at the top: Adobe Send has replaced Send Now. Can't sent file.

I am trying to send a PDF. It says at the top: Adobe Send has replaced Send Now. Can't sent file.

Hi Michelle Dim,
If you are an Adobe 'SendNow' subscriber, then you have automatically become a subscriber for 'Adobe Send' online service to send large files online at no additional cost.
Please try sending other PDF files using 'Adobe Send' after signing in with the same Adobe credentials and check if it happens with all PDFs or a specific one.
You might log out, clear your browser cache and then log in again to check.
Let me know.
Regards,
Anubha

Transferred songs to external hard drive, now iTunes can not locate files??

I transferred all my song files using various tutorials on the site, I consolidated my library, etc. The external harddrive was referred to as "F:" when I did this.
Later when I downloaded a few podcasts with my external HD disconnected, they were stored on my c: harddrive. At that point I had iTunes files on both my C: drive and F: drive (with the F: drive being disconnected at the time).
Now my external harddrive when connected is referred to as "G:" by my pc, and iTunes could not find any of my songs previously transferred to F:. I went to preferences/advanced again and selected G:/iTunes as my new folder location, and now only SOME of my songs are located by iTunes, not all. I'm completely confused.
Any advice? Thanks.
Completely frustrated,
Andy
Windows XP

Just a refining comment: iTunes recognizes some, but not all, songs that were transferred to the new hard drive, following iTune's instructions to change the directory then consolidate the library.
I am baffled why iTunes recognizes some songs, but not others, within the same folder....
The easy solution would be to use "import folder" and re-import the entire iTunes files on my harddrive, and then delete the duplicates, which would include the ones non-findable by iTunes. But then my playlists would be affected. I guess I'd have to re-build my playlists manually, using the new imported files in place of the files that iTunes can't recognize, prior to deleting all the duplicate non-findable files.
Argh, I hate pc's...thru & thru...any suggestions before I spend a few hours re-building my playlists and deleting the non-findable song files??
Thanks...

Upgraded to CS6 can't open files

I just upgraded to CS6 and when I go to open my InDesign files from my folders or from Bridge the program will open but not the file. The only way I can open a file is if I oprn InDesign, go to File, then open.
I have uninstalled, reinstalled. I have checked the registery to make sure that was all CS6.
I am running on Windows XP.
Any ideas on what to do to fix???

Not sure about Bridge, but it might be a problem in Explorer that the open command is missing the file variable. In Explorer click Tools > Folder Options, then the File types tab. Scroll down to .indd, seelct it and click the Advanced button, then select the Open command and click the Edit button.
Click in "Application used to perform action" field and press the End key on your keyboard. The command line should end in "%1" (including the quotes).

CS6 can not save files over 2GB???????

I need to make a giant poster at 6ft wide x 5 ft tall. I created a blank document in CS6 at 200ppi. I created some text, and imported a couple of 25MB images. I am unable to save the file as a .PSD because it indicates that PS can not save files over 2GB.
1. How did this file grow to become over 2GB?
2. Why can PS not save a .PSD over 2GB?
3. What do you do if you need to create a large format print such as this?
Thanks in advance.

Very true.
However, Jeff knows exactly what he's doing and he's very, very good at it. If your image were fortunate enough to end up being printed by Jeff Schewe, he'd be able to tell you exactly what kind of an image file he wants from you.
Always check with the printer.

Windows disk-scanned my iPod and now iTunes can't recognize it.

I have a 80gb iPod classic with version 1.1.2 PC installed. Yesterday when I was booting my computer up, Windows decided it needed to check one of my disks for consistency (no points for guessing what "disk"). It gave me the message Unrecoverable error in folder \iPod_Control\Music\F00. It then converted that folder to a file, and then did a lot of chain cross-linking and orphan-truncating. The upshot of this is, now my iTunes can't find the iPod when I plug it in. I've done everything the support base file said on when Windows recognizes the iPod and iTunes doesn't, and nothing's changed. Should I just try to recreate the missing folder? Rest assured, first thing I'm doing once I can get iTunes and the iPod talking to each other again is a full restore. Any help would be fantastic.

Took my own advice and created a new F00 folder. Upon reconnecting, iTunes recognized it instantly. Restore is already underway. Thanks for listening anyway.

I upgraded to QT 7.5.5 and now I can't play file

Hey QuickTime Golden Gods, I was wondering if you can help me with this: yesterday I downloaded and installed the newest QT (7.5.5, free version) and now I cannot play a .mov file with which I had no problems at all before. When I try to open it, all I get is a pitch-black screen. This also happens when I try to open it with Internet Explorer and Mozilla Firefox. I tried it in a different computer (same OS) which has an older version of QT (same versions of IE and Firefox) and it works beautifully, so the problem has to have something to do with the new QT.
I uploaded the .mov file to SendSpace - I'm not sure if this is the right etiquette, but I thought you might want to check the file for yourselves; it's the "interactive booklet" for The Hold Steady's 'Boys and Girls in America' album:
http://www.sendspace.com/file/dmjxv8
A million thanks in advance for any help you can throw my way.
-The Soup Nazi

I have same problem but how do i uninstall 7.5.5 w/o whole system reinstall?
I downloaded older quicktime, deleted current quicktime, but upon installing it says can't install cuz newer version is running.
Help.

I copied library to a new hard drive, now iphoto won't recognize files.

I am new to iPhoto, so be gentle. My daughter uses it a lot, and now I seem to have messed up her library. We are using iPhoto 4.0.3. OS 10.4.11
I installed a new hard drive. I copied the iTunes and iPhoto libraries to the new larger hard drive. I copied the iphoto library to a designated folder (not the default folder). My daughter has now moved the photos into their default location, and advised iPhoto of where to look - User/Daughter/Pictures/iPhoto library. When she opens iPhoto her photos don't appear. When she picks a photo and drops it into iPhoto, the message appears,
"could not be imported because an unrecognizable type or file may not contain valid data."
The files are jpegs that open fine in Photoshop, Preview etc.
I did some reading and saw reference to deleting the file com.apple.iphoto.plist. Tried that, no success.
I would appreciate your assistance. Like I say, I don't know iPhoto at all. As a second question, I have a G4 with a dual 1.8 processor, what version of iPhoto/iLife should I be looking to upgrade to?
Thanks for your help.

"could not be imported because an unrecognizable type or file may not contain valid data."
That is the standard error you get when you try to import a photo that already resides inside the iPhoto Library folder. It prevents duplication in your library.
It sounds like you followed the correct procedure, but let's double-check. iPhoto can be run from a location other than the default. When you moved the library, did you copy the whole iPhoto Library folder as one intact unit? How did your dtr point iPhoto to the library? The correct way is to hold down Option while launching, select "Choose (or Find) Library" then navigate to the iPhoto Library folder and Open. Is this what you/she did? If so, perhaps try again?
As a second question, I have a G4 with a dual 1.8 processor, what version of iPhoto/iLife should I be looking to upgrade to?
I am very happy with iLife '06 on my 1.4 GHz G4 mini with 1 GB RAM. You could get iLife '08 for iPhoto 7, but be aware that iMovie 7 won't load on your machine because it requires a G5 or Intel machine. I made the decision not to upgrade because I'm happy with my current performance, and I think that the video-intensive and RAM-hog iPhoto 7 would bog down my mini. You can still buy iLife '06 from Amazon.com. See the system requirements:
http://www.apple.com/ilife/systemrequirements.html
http://docs.info.apple.com/article.html?artnum=306336
Regards.

Updated to Firefox v.30, now I can't attach files to my Gmail or download files from websites. The troubleshooting stuff doesn't work. What's wrong?

Shortly after my PC (WinXP SP3) auto-updated to Firefox 30, I found that I could no longer attach files to my Gmail. Clicking on the paperclip icon would make the screen blink, then nothing. No list of files, no selecting files to attach.
Further testing showed that I could no longer right-mouse click on an image and save it. The right-mouse click will bring up the menu, but when I select "Save Image As" again, the screen blinks, and nothing happens.
When I tried attaching my resume to an online application, the website's "Browse" button won't bring up a file-listing to select my resume.
I have tried all the actions suggested in similar posts: I have disabled my anti-virus, I have cleared cookies, I have reset Firefox, I have restarted my router. Nothing has fixed the issue.
I do not have this problem when using IE8

For now, you need to create an exception to pop-up blocking for Gmail. Here's how:
While you have the compose window on the screen, click the padlock in the address bar.
* If the pop-up permission is listed there as Block, try changing it to Allow.
* If the pop-up permission is not listed there, click More Information to launch the Page Info dialog, then click Permissions in the top bar. Scroll down to "Open pop-up windows", uncheck the box for "Set default" then click Allow and close the dialog.
Then try the paper clip again. Success?
Unfortunately, that is "Google-wide" and not limited to mail, so... other pop-ups are possible that you've never noticed before.
Google indicates on their forums that they're working on fixing this, so you might check in a couple days whether you can block pop-ups on Google again.

Just upgraded to iTunes 10.4 - Now I can't drag files from iTunes to Garageband

Has anyone else experienced this problem?
I do a podcast and keep my bed music, sfx and whatnot in iTunes. When I need something I just drag it from iTunes and into GarageBand (4.1.2).
I upgraded iTunes last night (10.4) and now it no longer allows me to drag directly into GarageBand. I have to drag the file out of iTunes, then move it to GB.
Anyone else have this problem and find a fix?

Well, just finished my weekly podcast using Garageband and the "new and improved" iTunes. Here are the clunkers I've found:
1. Original problem of not being able to drag from iTunes to GarageBand. JamButty, I'll try out your workaround... for this show I literally had to drag all of the files I needed out of iTunes into a folder... Then why use iTunes at all?! Really stupid.
2. I noticed when I dragged the final show off of iTunes to a folder I use to upload to my S3 account, it now just has the black mp3 icon... not the image I use for the show. Granted, not a functional problem, but just stupid none the less why they would eliminate that.
3. Show notes in the metadata. Usually I'd copy my first paragraph of show notes (what goes on the web page) into Info > Comments in the metadata. And, if was too long, it would just chop off the end of it. This time I got a "bink" sound and nothing copied in. Tried it a couple of different ways with the same results until I figured out to just put half the copy in. Again, stupid, useless, time-consuming change.
I love Apple to death, but I hate what they do sometimes. The make a great product... then eventually screw it up with dumb changes (for example, the latest version of Final Cut)

Bridge CS3 now crashes when moving/copying files

As the title says.
A few days ago Bridge started freezing and I dumped the preference files from the user Library, the computer's Library and also the one in the "Save preferences" folder. Now it's giving me problems when moving/copying files with the 'Move to" and "Copy to" commands on the File menu. It works fine when I use one of the options on the "Recent Folders" list, but when I want to select a folder using the "Choose Folder" option, it just crashes.

Hi Robert,
I'm a developer from Br team. Thanks for reporting Br. problems.
It seems like a memory issue. Please try this to help us identify the root cause:
1. Disable all startup scripts (Edit->Preferences->Startup Scripts->Disable All), then restart Br.
2. When Br is running, kill "SwitchBoard" process in task manager.
3. When do Copy&Move operations, don't use Drag&Drop, try to use "Move To / Copy To" menu. (A known issue of Bridge, should be fixed in later versions)
Does the crash still happens?
Thanks very much!

I updated Firefox and now I can't attach files to an e-mail in gmail. I have tried multiple files with no success but have no problems in Chrome.

See above.

Try to clear cache and cookies by doing the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Did this fix your problems? Please report back to us!

I have updated my numbers app on my desktop, but now I can't open files I have saved to my desktop. It tells me that it can't be opened and there is a newer version of numbers. I already have that. What to do?

Does anyone have an answer? I can't get apple support. I have files that I need that I can't open because I get an error that there is a new version of numbers, but I have already downloaded it.

Mrs. Pete,
Please see this post:
https://discussions.apple.com/message/25041300#25041300

Upgraded to Mavericks and now I can't compress files, move files, preview files or open files outside of their native application. Ran disk utilities multiple times and checked file and folder permissions. Any ideas?

For example, I'm trying ot move a group of jpgs from one folder ot another and it throws an 8058 error every time. PSD's won't open fromt he finder, it throws an application not found error even though I can open the same files from within the application.

Yep, same here. Cannot drag and drop copy with Mavericks. A copy paste throws a 8058 error.

Unistalled CS3 now CS6 can't recognize files

Similar Messages

Maybe you are looking for