Unit Conversion issue for same material with Diff KPI

Hi,
i have a report with multiple key figures which form a structure.
Unit conversion for this report and all the key figures are defined at report level.
Below are the settings in place
Source currency:    Data record from target
Target Currency:    From variable ( Input variable in BeX report)
Conversion  factor: Dyanamic Determination of conversion factor
                               Using Reference Infobject if available otherwise use T006
                               Reference Infobject: 0Material
Issue: For 1 Key figure conversion to TO is happening, however for other Key figure conversion is not happening for the same material.
Note: Conversion to TO is defined in BEX settings for Info object 0material and stored in DSO UOM0MATE.
Why for same material some key figures convert to target unit correctly and not the others?
See the attached screenshot. Sales Quantity is convertin to "TO" while Volume third party shows figue in"ERR" for same material.
Thanks
Nayab

Hi,
Following reasons cause to your issue,
1. Unit Conversion is not maintained for that particular material  in source system Material itself, so that  conversion data data may not updated in DSO (UOM0MATE).
2. For particular transnational data record key figure value don't have any base unit or units measures, that case also  you may get that error.
Request check the transnational data in your InfoProvider and 0Material Master data and DSO data (UOM0MATE) . Correct the data based on that.
Check the Master data test in RSRV for 0Material, if any SID generations was missed or not.
I hope this can be help to find the cause of error , based on that you can resolve problem.
Thanks & Regards,
Leela Krishna.

Similar Messages

  • Create inbound delivery for same material with multiple batches

    Hi Experts,
    An ASN( advanced shipping notification) contains multiple batch numbers for same material or line item.An IDOC has different segments with batch numbers but in SAP while creating Inbound delivery(VL31N) only batch number ( segment) get posted automatically in SAP other batches are need to post manuaaly.
    I am using IDoc type : Delivery03 ,Message type: DESADV
    How to resolve this problem?
    Thanks,
    Anil

    Hi Anil,
    Welcome to SCN for your first post. Did you check with your functional people about this.
    Regards,
    Madhu.

  • Same material with diff. Production scheduler profiles

    Hi,
    I am working on PP-PI, where the same material is being manufactured using separate order types.
    To be  more specific, one order type for the  regular manufacturing & another  with Re-work order type. The  requirement is  such that the  Order type  dependent parameters & production scheduler profile are different in  both the cases. Since my master  has the prod. scheduler for  regular manufacturing on the material master, even if i select the  Re-work order type the system is considering the Settings of the  regular manufacturing order.
    I need to keep the production scheduler profile of the regular manufacturing order as a default in the material
    master due to various  reasons. At the same  time system should consider the  settings for Re-work order only when the specific order type is  manually selected during order creation.
    Appropriate solution would be of great  help, thanks in advance

    Hi,
    Try using user exit. change the production scheduler profile during order save  based on  the order type.
    check with your technical team.
    hope this helps.
    regards
    CSN

  • Maintain differ type of Unit of measurment for same material

    Hi Expert
    I procured (internal /external)   one material in Kg, but I want maintain different unit of measurement (like M). & sale is different unit of measurement (like m2).it  is possible ?
    If Possible kindly explain the steps
    Advance thanks for all
    Regards
    Porsee

    Hi,
    You can maintain different BuM
    But the stock keeping BuM will remain same
    You have to maiintain in Purchasing view if you wish to Purchase in different BuM other than BuM of material soon you enter different BuM in Purcahsing system aske for the convsrsion factor Like 1kg = 100 PC here BuM is 1Kg but ordered BuM is PC
    In the similer way in Sales View you can enter sales BuM &  stock keep BuM.
    Regards

  • Muliple inspection plan for same material and same usage

    Hi,
    I need to create multiple inspection plans for same material with same usage.during the inspection lot creation i need to select any one inspection plan.
    In standard SAP its not possible.Any user exits available for this..
    Regards,
    S.P.Selvathangam

    Dear Selvathangam Palanisamy ,
                                                       My Dear Shayamal is absolutely correct and we are corrently using this SAP facility. You can create 'N' number of inspectio plans for a material and then whenever the inspection lot will created ( Thru a process order or Manual) then you will get the Inspection Lot Status 'CRTD' (Created mode) then you have to select your Inspection Task list manually by two way...
    Either go to QA02 and then select it from the list of multiple plans.
    Or you can directly go from QA32 ...select your inspection lot row and directly click on the Inspection Lot icon to go directly to the inspection lot window to slect the Task list.
    Further there is no need to remove the Automatic Assignment from the QM View of the Material Master as if there is only one task List then system will automatically assign the TASK LIST, if you deselect it then you have to select in every case.
    Thanks

  • How do we maintain diff price for same material diff customer

    Hi Experts,
    Wish you all a very happy new year 2010.
    Here is the question which I have for you..very elementary.
    I need to maintain different price for different customer for same material in the same sales area, for the same plant
    Can anyone let me know how to do it !!
    There are more than 10k customers for whom different price needs to be maintained.
    P.S: I tried to search in the forum a lot about this, but was not able to find one correct answer.
    Thanks and Regards
    Rohit Dujari

    Hello,
    You can take help of ABAPer to create a batch input session or you may use LSMW .  You can split these 10000 customers into some practicle numbers (group) depending on your policy.
    You may also explore rules for creating condition records which frankly i am not awareyou get a select rule tab on bottom side of screen when you go to  vk11/vk12
    Regards
    Vivek

  • Alternative unit of Measure for variant material

    Dear All,
    Here is an interesting scenario,
    There is a naterial Billet with two variant characteristics length and size. and base unit of measure is TON. Now alternative unit of measure is PCS.  How can define the conversion factor on the basis of these two variant characteristics.
    In normal material (without variant char.)
    we can define conversion factor 1PCS= 2TON
    For variant material,
    For the material Billet with variant charc length and size how can i define conversion
    so that system calculates diff. PCS with diff. length and size but material is same. So how can i Do that.
    for example for same material Billet but variant char. Length is 6 M and size is 120*120 ,its wt will be 2 TON for 1 PCS.
    for the same material Billet with variant char. length 12 M and size 120*120, its wt will be 12TON for 1 PCS.
    How can i cater this for the same material.

    Hi Shoaib,
    We have faced the similar scenario for steel industry. Based on my experience, it is not possible to define variable values for Alternative UOM conversion with the variant characteristic/configuration, specially if you want SAP to maintain inventory with variable conversion rate.
    Use the Batch specific unit of measure for this situation.
    1) Create batch specific UOM i.e. Ton_per_pc (TOP) --- User proportional unit conversion
    2) Create batch characteristic ton_per_pc and assigned UOm.
    3) In material master additonal data select proportion unit and enter the standard conversion rate between ton & pcs.
    4) While doing GR - In batch creation you can enter whatever the conversion rate is and Inventory will be updated accordingly.
    Regards,
    Ravi.

  • How to update Unit Of Measure for a material in BAPI_SALESORDER_CHANGE

    Hi All
    How to update Unit Of Measure for a material in BAPI_SALESORDER_CHANGE

    hi,
    in BAPISDITM structure, which is their in orderitemin
    update updateflag of BAPISDITMX, which is their in orderiteminx for the same field with update flag = 'U'
         kindly try with <b>T_UNIT_ISO</b>
                                or
                               <b>TARGET_QU</b>
    comeback with u r comment
    regards,
    pavan
    Message was edited by:
            pavan kumar pisipati

  • GATP/ATP Check for Different Order Types for same material

    Hi :
    I have a material code X for which 2 different type of Sales Order (Say A and B )needs to be created.
    For Sales Order Type A the atp check needs to be done in APO through GATP for material code X.
    For Sales Order Type B the atp check needs to be done in SAP R/3 ECC 6.0 through availabilty check functionality for same material code X.
    It is not possible to create seperate material codes to carry out atp/gatp check seperately in R/3 and in APO.
    In real time the atp and cumulative atp position should be same in R/3 and in APO.
    Please let me know solution for this issue.
    With Regards
    Ashish Gupta

    Hi Ashish,
    Can you share with us as to how you were able to solve this issue. I have a similar issue like yours and I am totally clueless as to what needs to be done..
    My scenario goes this way:
    I have to modify the Schedule line dates for a GATP material according to a newly created date which I calculate based on the Route Schedule id (VL51, VL52) and display the same in the Sales Order schedule line items.
    Also can I get a new set of schedule line dates from the APO system for a date which I calculate based on the Goods Issue date - VALW-AULWE in any exit using a FM or a BAPI?? so that I can get these dates and populate the same in the Sales Order Schedule line??
    Thanks in advance,
    Susanth

  • I am trying to insert rows for alert_id 22 with diff abc_id and xyz_id

    I am trying to insert rows for alert_id 22 with diff abc_id and xyz_id
    these inserts will store in two tables that I have to join in the cursor.
    I have written cursor without passing cursor parameters. but here i need to pass acb_id and xyz_id along with alert_id.
    then if these are saticified with alert_id 22 then I want to stop the loop run, else i need to continue the loop. bcause the abc_id and xyz_id are diff for alert_id 22
    This is the issue I am facing!
    Please let me know if you have any idea. Let me know how to use cursor parameters here and in loop.
    Sample proc like this::
    Declare
    main_cursor
    another_cur
    alert_cur
    begin
    need to check first abc_id,xyz_id is already exist with alert_id 22
    if this set of records already exists then
    exit from the loop
    else
    continue with
    loop
    here coming the insert statements with different condition getting from first two cursors.(this part is ok for me)
    end loop
    end if
    Please write the logic if any idea on this.
    -LRK

    I want to stop if already alert_id is exist!

  • Cost Estimation Through Two PIR valid for same material

    Hello Everyone
    I am trying to costing strategy with PIR (Purchase Info Record). Just to check whether its working right or not i have only choosen sub strategy 'Effective Price from Quotation'. My problem is we have got more than one PIR for the same material from different vendors (both have valid dates). My first question is how system will calculate if both PIRs for same material is valid with different prices.
    My expectation was that system should pick up the price from PIR which has regular vendor flag ticked in PIR master record but this is not the case. System is picking up the price from the other PIR although i don't know the logic. I am observing system is picking the lower price (as i tested two materials) in both cases. Can anybody guide me how can i make sure that system picks up the price from PIR which has regular ticked or can anybody suggest something elsethat which is right sub strategy to use for PIR?
    Thanks in advence

    Hi Young Sun
    The link really helped me a lot to understand the process how system is picking up price. We don't use source list and quota requirement. I have noticed that system will not consider regualr flag tick in PIR for costing unless you you configure at backend in
    Material Logistics->Purchasing->Source Determination->Define Regular Vendor
    Once i have activated that tick system is working fine and picking up the price from regular vendor flag. If regular vendor is not ticked system will go vendor with lower price.
    @Imdad: Thanks for your kind help as well and input.
    Many thanks again.
    Regards

  • How to Maintain two different prices for same material in different qty?

    Dear all,
    How to maintain two different prices for same material in different batch quantities in purchase order(ie.,info record)?
    (Vendor is supplying quantities in 2 different batches & also in different prices)
    Expecting valuable reply.
    Jeyakanthan

    In a PO you can create 2 items, and each item can be maintained with a different price in the conditions.
    In info record it is not possible to have different prices for the same period, except for scales.
    so if you have a price of e.g. 2 USD for 1000 kg and 1,90 USD for 2000 kg then you can maintain this in scales, but you still have to have 2 items in the PO so that each one can individually find its price.
    Alternative you can create contracts (as well with more than one item) to reflect the different prices and batches.

  • Serial Number creation for a material with stock type

    Hi,
    I am not able to create the serial number for a material which should have valuation type, plant and storage location using the function module ITOB_SERIALNO_CREATE_SINGLE.
    There is no export or changing parametre for this function module for Valuation type(EQBS-LBBSA),
                    Plant(EQBS-B_WERK) and
                   Storage Location(EQBS-B_LAGER)
    Can any one suggest me the BAPI or function module to create a serial number for a material with valudation type, plant and storage location rather tan going for BDC to transaction code IQ01.
    (Note: We can create the serial number with valuation type manually using the transaction code "IQ01" for agiven material.)
    For suitable answers would be rewarded.
    Regards
    Badari
    Edited by: badari Narayana on Feb 10, 2008 5:20 PM

    I have the solution below.
    - Don't change Serial no. profile
    - Goods issue all stock with mvt 201 or 261 into temporary cost object and note your text.
    - Change Serial no. profile in material master
    - Goods receipt all stock (You may ref. material doc.) and you need to input serial number for all materials.
    Hope this solution can help you.
    Edited by: Saiyaman on Dec 9, 2009 5:33 PM

  • How to arrive same day two difference prices for same material/customer

    how to arrive same day two difference prices for same material/customer.pls give the solution
    thanks in advance
    Aravinthan.K

    Hi
    This is possible through some careful customization
    In your condition table you need to bring the field PRICE LIST
    That is customer/ Material/ Price list
    That is customer  ABCD / Material X / Price list 01---Price is Rs 10
    That is customer  ABCD / Material X / Price list 02---Price is Rs 20
    The condition records to be maintained like this
    So same material and same customer with price list 01 price is Rs 10 and with  price list 02 price is Rs 20
    Now in sales order you will find  price list field in item details SALES B tab
    Through incompletion log you can make this field as an mandatory field
    Now in sales order same material and same customer according to the price lists different price is picked
    In img-sd-basic functions-Maintain Price-Relevant Master Data Fields--here you can define different price lists
    Regards
    Raja

  • Same  Material with different itemcatagory groups

    We have 3rd party manufacturers that make product for company and sometimes they send the finished product back to company and other times they will drop ship it to one of our customers.
    this scenario we need to have the same material with different itemcatagory groups
    i tried to create same material with different storage locations, but it's possible but the thing is when i change the item catagory group for the material , the same is applicable for 2nd same material, my requirement is i need 2 different itemcatagory for the same material,  hope u understand my requirement
    i will be expecting your possible replys.
    Thanks & Regards
    Venkat.Dhanemkula

    Hi Venkat..
    Please explain it more clear manner..
    With whatever i have understand, i think you scenerio is manual 3rd party order processing.
    In that case the material that you normally deliver yourself but occasionally need to order from a third-party vendor, you can overwrite the item category during sales order processing.
    Keep only one material and specify the item category group NORM in the material master.
    If, as an exception, you use a third-party material, change the entry TAN to TAS in the ItCa field when processing the sales document. The item is then processed as third-party item.
    hope it helps you.
    Regards
    Harry

Maybe you are looking for