Unit Conversion Using RSUOM

Hi, this i have already posted but i didn’t got helpful suggestions...
plz help me to resolve this...
I am using BW7.0's feature - Quantity Conversion (TCode: RSUOM).
I am Traying to Convert all the Quentity Units to one Unit , I have followed the following Steps.
Steps :-
1)     In the BEx Tab page of Characteristic 0MATERIAL, maintained the field "Base Unit of Measure" as 0BASE_UOM
2)     In the BEx Tab page of Characteristic 0MATERIAL, maintained the field "Unit of Measure for Char." by click on the New button, it will generate a DataStore Object, which will store information for calculating the conversion factor.
3)     I have created Transformation from 0MAT_UNIT_ATTR to Generated DSO
4)     The Mapping is
MATNR ---> 0MATERIAL. ( Material )
MEINH ---> 0UNIT ( Unit of Measure )
UMREZ --- >0UOMZ1D ( Counter )
UMREN ---> 0UOMN1D ( Denominator )
MATNR  -
> 0BASE_UOM ( This is Lodead through Master Data )
5)     Fill in the DataStore generated with data, using the DataSource 0MAT_UNIT_ATTR Using Transfermation and DTP.
6)     Data is Loaded Successfully AND the Data is in Active.
7)     Then I Created the Quantity Conversion Type through TCode RSUOM ( Eg: ZUOM ),
In the Conversion factor Tab , The Dynemick Determinetion of Convertion Factor Option 3 I have selected with reference to 0MATERIAL InfoObject.
8)     In UoM Tab, I have selected radio button
Source : Info Object for Determining the Unit of Measure  ( 0MATERIAL  and Quantity Attribute 0BASE_UOM )
Target : Fixed Unit of Measure ( CAR )
9)     Then in Query Designer , Quantity Key Figure Properties ( Eg: 0QUANT_B ) --- > In Unit
      Conversion I have selected Conversion Type ZUOM
When I execute the Query , it is not Converting the Units.
I am Trying to Convery all the units in to CAR ( Cartons )
Eg : 10 Kg = 1CAR
     1000 kg = 1 MT
Where I am missing ? what are the Radio Buttons I have to select in RSUOM
Thanks
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/bi/define%2bunit%2bof%2bmeasure%2bconversions%2bin%2b0material%2bdefinition
I check this link , i didnot find all the screens..
Regards,
SHAIK
Message was edited by:
        shaik

Hi Shai,
It sometimes show without all the screens, I guess u should refresh.
Anyway,
Try running the query thorugh RSRT with Debug, with a breakpoint on currency/quantity conversion. I would suggest to restrict the test query to show only one record that should be converted so the debugging would be easier.
Anyway, Have fun.

Similar Messages

  • Problem in 2 level Unit conversion using ref IO

    Hi All,
    I am doing UoM conversion using conversion types - dynamic conversion using reference info object.
    Now in the UoM DSO, which stores the conversion factors, I have relation between 2 units say PC (pieces, dimensionless) and KG (kilogram, dimension = MASS) for some material.
    For e.g I have  1 Pc of material A = 2 KG.
    So if the existing qty key figure has unit PC in IC and the reporting unit given by me is KG, successful conversion takes place using the UoM DSO.
    E.g. 4 PC of Mat A is displayed as 8 KGs.
    Also if existing unit in IC is KG, and RU is 'g' conversion is taking place usion tghe system CUoM table T006.
    E.g. 2 KG is displayed as 2000 g.
    I selected the third option when creating Conv Type, i.e. first look in ref IO then T006. Hence the above results.
    But if the existing qty key figure has unit PC and if the reporting unit given is 'g' or some other MASS unit, conversion is not taking place. Ideally it should first look into the DSO table to convert 'PC' to 'KG', then look the T006 table to convert 'KG' to 'g', but this is not happening.
    E.g. 4 PC of mat A isn't shown as 8000 g. It is still shoeing as 4 PC.

    Hi Shai,
    It sometimes show without all the screens, I guess u should refresh.
    Anyway,
    Try running the query thorugh RSRT with Debug, with a breakpoint on currency/quantity conversion. I would suggest to restrict the test query to show only one record that should be converted so the debugging would be easier.
    Anyway, Have fun.

  • Function modules for unit conversion

    hai gurus.
    what is the function module to make one qty to the same unit as other qty.
    if one is in kg and other in pounds
    i want to make both in pounds.
    pls help me with this

    Hi
    chk UNIT_CONVERSION_SAMPLE
    also chk this
    CF_UT_UNIT_CONVERSION
    Some Insights-
    Unit conversions
    with NW2004s the HOW-TO GUIDE for qty conversion is obsolete.
    http://help.sap.com/saphelp_nw2004s/helpdata/en/27/b65c42b4e05542e10000000a1550b0/content.htm
    As of SAP NetWeaver 2004s you can create quantity conversion types using transaction RSUOM.
    The business transaction rules of the conversion are established in the quantity conversion type. The conversion type is a combination of different parameters (conversion factors, source and target units of measure) that determine how the
    conversion is performed.
    In terms of functionality, quantity conversion is structured similarly to currency translation.
    Quantity conversion allows you to convert key figures with units that have different units of measure in the source system into a uniform unit of measure in the BI system when you update them into InfoCubes
    http://help.sap.com/saphelp_nw04s/helpdata/en/27/b38c4284a8c353e10000000a1550b0/content.htm
    It is entered in ODS table linked to info object (0material)
    What you need to do basically is-
    1 ) Goto your infoobject for eg- 0material
    2 ) In Info object Maintenance- Tab page- Bex Explorer
    3 ) Enter 0BASE_UOM in Base unit of measure
    4 ) Generate UOM ODS (System generates it with prefix UOM)
    It is made of 4 fields (1 more in case of compounding) with SID for them. This is the place where you enter numerator and
    denominator to calculate conversion factor
    5 ) Load the UOM ODS with conversion from 0MAT_UNIT_ATTR or flat file
    6 ) Define conversion type
    7 ) In the conversion type, then you can select 0Material in the dynamic determination of conversion factor
    8 ) Select source unit and target unit
    For more help refer SAP help file on NW2004s. It is comprehensive and even explain - How to do unit conversion in
    transformation rule?
    http://help.sap.com/saphelp_nw04s/helpdata/en/4f/707242df019c60e10000000a1550b0/content.htm
    Check this sample code,
      CALL FUNCTION 'CONVERT_TO_LOCAL_CURRENCY'
        EXPORTING
    *     CLIENT                  = SY-MANDT
          DATE                    = pdate
          FOREIGN_AMOUNT          = p_amt1
          FOREIGN_CURRENCY        = p_curr1
          LOCAL_CURRENCY          = p_curr2
    *     RATE                    = 0
    *     TYPE_OF_RATE            = 'M'
    *     READ_TCURR              = 'X'
        IMPORTING
          EXCHANGE_RATE           = w_rate
          FOREIGN_FACTOR          = w_fact1
          LOCAL_AMOUNT            = w_amt
          LOCAL_FACTOR            = w_fact2
    *     EXCHANGE_RATEX          =
    *     FIXED_RATE              =
    *     DERIVED_RATE_TYPE       =
        EXCEPTIONS
          NO_RATE_FOUND           = 1
          OVERFLOW                = 2
          NO_FACTORS_FOUND        = 3
          NO_SPREAD_FOUND         = 4
          DERIVED_2_TIMES         = 5
          OTHERS                  = 6.
      IF SY-SUBRC <> 0.
        write: / 'Conversion to loc.curr. failed:',
                 p_curr1, '->', p_curr2, 'err.code=', sy-subrc.
      ELSE.
        write: / 'to Loc.curr:', p_amt1 currency p_curr1, p_curr1, '->',
               w_amt currency p_curr2, p_curr2,
               '(', w_rate, ')', w_fact1, w_fact2.
      ENDIF.
    http://www.geocities.com/victorav15/sapr3/examples/currconv.txt
    Check this
    CONVERSION_FACTOR_GET
    Measurement unit conversion: Get measurement unit conversion factor Not for Dimensionless Units of Measure
    UNIT_CONVERSION_SIMPLE Measurement unit conversion by table T006, with rounding
    UNIT_OF_MEASURE_SAP_TO_ISO 
    UNIT_OF_MEASURE_ISO_TO_SAP
    MATERIAL_UNIT_CONVERSION Material quantity conversion from Base Unit of Measure to Alternative Unit of Measure and vice versa. For Dimensionless Units of Measure (Each, Piece, Box etc.) conversion depends on the given Material (see table MARM). For other Units of Measure (Length, Weigth etc.) conversion can be calculated from the T006 table or via CONVERSION_FACTOR_GET.
    CONVERSION_EXIT_CUNIT_INPUT Conversion exit for commercial (3-char) measurement unit INPUT
    CONVERSION_EXIT_CUNIT_OUTPUT Conversion exit for commercial (3-char) measurement unit OUTPUT
    CONVERSION_EXIT_LUNIT_INPUT Conversion exit for technical (6-char) measurement unit INPUT
    CONVERSION_EXIT_LUNIT_OUTPUT Conversion exit for technical (6-char) measurement unit OUTPUT
    UNIT_OF_MEASUREMENT_HELP Input help for measurement units of a predefined dimension
    http://www.geocities.com/victorav15/sapr3/abapfun.html
    Reward all helpfull answers
    Regards
    Pavan

  • Unit Conversion Problem

    Hi I am having some issues in unit conversion.Let me brefly explain the scenarioa below
    Coversion Type Settings:
    Source currency:    Data record from target
    Target Currency:    From variable ( Input variable in BeX report)
    Conversion  factor: Dyanamic Determination of conversion factor
                                   Using Reference Infobject if available otherwise use T006
                                   Reference Infobject: 0Material
    Now for 1 material "Conversion to ton" attribute is zero as below. But at report level conversion to TO is happening correctly.
    However for other material Conversion to TO is zero and at report conversion aint happening. (Target currency appears as ERR).
    Why is conversion not happening for 20053110, because in both the cases above 0Material infobject is referred to read conversion factor.
    Thanks

    Hi Nayab,
    In both cases, the value in the "Conversion to TON" attribute is irrelevant.
    The option you have selected in RSUOM will basically do the following
    1. Check the unit conversion DSO for 0MATERIAL. You can see the DSO name if you open 0MATERIAL in RSD1, check the BEx tab. Normally it is UOM0MATE, but it may be configured as something else in your system. This DSO defines the conversion rates at a material level. For instance, it could say the conversion rate for Material ABC for Pieces -> KGs is X... i.e. 1 piece = X KGs.
    2. If the above fails (i.e. no conversion exists for the material in the above DSO), then it tries to convert the quantities based on the T006 table. This second step only works for conversions within a physical dimension. For instance, the second step will work for conversions from Ton->KG, KG->lbs, metres->feet, litres -> gallons etc, but it will not work for say gallons -> tons or pieces -> kgs.
    Regards,
    Suhas

  • Unit Conversion in BEx BI7.0

    Hello all,
    Im working with BI7.0 and I have been reading the posts about the quantity conversion and In order to use the unit conversion in BEX (not in transformation), I can apply the sugestion described in
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b7b2aa90-0201-0010-a480-a755eeb82b6f
    But what happens with the post in this forum about using transaction RSUOM ..i mean if i use the link solution isnot necessary to use transaction RSUOM? or with BI7 is the "new" solution to use RSUOM ¿?
    Can someone please explain a little bit
    Thanks in advance for your help.
    MV

    thanks gdmon for your help..
    I have already created the underlying DSO and  "connected" to the 0MAT_UNIT InfoObject using a transformation. In the transformation rule I have been conected:
    MATNR->0MATERIAL,
    MEINH->0UNIT,
    UMREZ->0UOMZ1D,
    UMREN->0UOMN1D
    but I still have 0BASE_UOM not assigned ..my question is if is possible not assign the infoObject 0BASE_UOM (initial) or if I have to assign to a R/3 field..but do you know which field can I assign?
    thanks in advance for your response...
    MV

  • Unit Conversion in Info Set Query

    Hello Experts
    I have create a query on infoset in which I want to show the qty field with the unit conversion factor . but I am not able to do so.
    It is giving an error message while saving the query
    0Material is not a valid characteristics for Info provider ZINFOSET
    Diagnosis
    Customer enhancement RSR00002 or the implementation of BAdI RSR_OLAB_BADI delivers 0MATERIAL as the characteristic to be calculated. 1. is, however, not a valid key figure for InfoProvider ZIS_BILL.
    System Response
    The information from 0MATERIAL is ignored.
    Procedure
    Check the exit.
    Procedure for System Administration
    Please help me out
    Thanks
    Neha

    Hi,
    You can try unit conversion planning function,create planning function and add it at the back of button.
    Can refer to link below:-
    Not sure if it can solve your problem.As it also depends upon source and target keyfigure used.
    http://help.sap.com/saphelp_nw70/helpdata/en/44/21643cedf8648ee10000000a1553f7/content.htm

  • Unit Conversion in Query Designer

    Hi All,
    In one of my report, i have to show the gross weight in column against material which i am reading from material master.
    Now the weight is stored in two different unit's KG & G.
    But i have to show the weight finally in KG.
    Does any body has any idea of performing unit conversion at Query level i.e. in Query Designer.
    Thanks.

    Rakesh the same i am doing, that is reading the weight value from material master through formula variable using replacement path.
    Now when i create a key figure like this, there is a tab of 'Conversion' in that there is mentioned the 'Unit conversion'
    In there, there are 2 options
    1. Conversion type - this is a drop down but with no vlaue
    2. Target Unit - Where i selected KG.
    But output remains the same, i.e. in KG.
    M I missing something ?

  • Unit Conversion in the Query

    Hello Experts.
    I have a situation where I need the units of quantity to be converted at the query level. For e.g. if the value of the keyfigure is stored in litres in the Cube, then at the time of the query execution this value should be converted in gallons.
    I cannot use the following options in this case:
    1) The Solution for alternate UOM using the How-to guide for the same as the conversion from liters to gallons is not maintained at the material master level in my case
    2) I cannot use the Unit Conversion in the Conversion tab because gallons won't be the only target unit in my report, it will depend on the type of material select by the user.
    Please let me know about the options in this case. Any sort of help is appreciated and points will be duly rewarded.
    Thanks,
    Rishi

    Hi Prasad,
    In both of the ways, there should be only one target unit for them to work which is not the case in my situation. I want only specific material types to be displayed in gallons. If the User selects a different Material type then the target unit will be different.
    Any other possible solution on this one.
    Thanks,
    Rishi

  • Currency (unit) conversion in Spotlight?

    Hi!
    With Leopard came the ability to use Calculator.app within Spotlight. Brilliant. But is there any way to use Calculator's awesome unit conversion in Spotlight, too? I find myself going to google every time (d'uh).
    Peter

    HI Peter,
    Not sure if Spotlight supports the calculator application but a work around might be a Dashboard widget.
    Go here.
    http://www.apple.com/downloads/dashboard/calculate_convert/
    Carolyn

  • Unit Conversion issue for same material with Diff KPI

    Hi,
    i have a report with multiple key figures which form a structure.
    Unit conversion for this report and all the key figures are defined at report level.
    Below are the settings in place
    Source currency:    Data record from target
    Target Currency:    From variable ( Input variable in BeX report)
    Conversion  factor: Dyanamic Determination of conversion factor
                                   Using Reference Infobject if available otherwise use T006
                                   Reference Infobject: 0Material
    Issue: For 1 Key figure conversion to TO is happening, however for other Key figure conversion is not happening for the same material.
    Note: Conversion to TO is defined in BEX settings for Info object 0material and stored in DSO UOM0MATE.
    Why for same material some key figures convert to target unit correctly and not the others?
    See the attached screenshot. Sales Quantity is convertin to "TO" while Volume third party shows figue in"ERR" for same material.
    Thanks
    Nayab

    Hi,
    Following reasons cause to your issue,
    1. Unit Conversion is not maintained for that particular material  in source system Material itself, so that  conversion data data may not updated in DSO (UOM0MATE).
    2. For particular transnational data record key figure value don't have any base unit or units measures, that case also  you may get that error.
    Request check the transnational data in your InfoProvider and 0Material Master data and DSO data (UOM0MATE) . Correct the data based on that.
    Check the Master data test in RSRV for 0Material, if any SID generations was missed or not.
    I hope this can be help to find the cause of error , based on that you can resolve problem.
    Thanks & Regards,
    Leela Krishna.

  • Quantity and Unit conversions

    Hi Experts,
    I have an inventory report in which i have three columns (Total cost per unit, Stock Quantiy and stock values)
    Total Cost per unit is in EUR  -- currency conversion exists in the report level.
    Stock Quantity in KG/PC/LB  - Unit conversion exists at report level.
    Stock value in EUR     -- Multiplication of Total cost per unit and stock quantity.
    In my case, Total cost per unit and Stock quantities are coming from different Infocubes on top of which a MP is designed.
    When i change the UOM from KG to G or PC or LB, Stock Quantiy values are changing accordingly.
    However the Stock value is also changing which should not happen because realistically Stock value in EUR for a specific material and plant combination should always be same irrespective of any UOM(KG/G/PC/LB) for the keyfigure "Stock Quantity".
    I am wondering if it possible to change the "Total cost per unit" value in the report according to the change in UOM.If so can you provide me your valuable inputs?
    Quick help is highly appreciated.
    Best Regards
    Nag

    hi,
    Please use CKF's for all the three values, currently it might be changing as it might be a simple formula i.e. a = b*c.
    if b changes then a is bound to change.
    create CKF without any currency conversion. apply the calculations in CKF.
    In the end use CKF in the report and apply the conversions after adding them in the query column.
    regards,
    Arvind.

  • Unit conversion (days to hours)

    Hello,
    I have got a question concerning unit conversion in integrated planning.
    I created a key figure called "workload" and asigned the UnitInfoObject "0unit". Two input-ready queries are available in order to plan the workload in two different units of measurements. One allows planning in hours and the other in days. Furthermore, I would like to have the planned data only in the unit "hours" available in the InfoCube. This requires a unit conversion in some place for the input-ready query that retrieves workload data in days. I am not sure, if a planning function is the appropriate manner to solve this issue. The conversion factor should be 8 as 1 working day is equal to 8 working days.
    Can anybody explain me how to do that? The sap.help.com is not very expressive in respect with this issue!
    I found a "HowTo" paper in sdn. Apparently, you have to maintain an InfoObject in order to convert the data. I do not understand why you need an InfoObject as a the conversion is a simple factor (in this case times 8 ). 
    Thanks in advance!
    Mario
    Edited by: Mario Di Marzo on Dec 15, 2008 6:44 PM

    you can use a FOX formula for that

  • Query performanz due to Unit Conversion

    Hello,
    I have the requirement to improved the performance of some queries with unit conversion. Could someone help me with How Tos or Tipps to solved this issue?
    Thanks in advance
    KmerSoft

    Hi
    Thanks for the reply. After a lot more googling- it turns out this is a general Oracle problem and is not solely related to use of the GEOMETRY column. It seems that sometimes, the Oracle optimiser makes an arbitrary decision to do bitmap conversion. No amount of hints will get it to change its mind !
    One person reported a similarly negative change after table statistic collection had run.
    Why changing the columns being retrieved should change the execution path, I do not know.
    We have a numeric primary key which is always set to a positive value. When I added "AND primary_key_column > 0" (a pretty pointless clause) the optimiser changed the way it works and we got it working fast again.
    Chris

  • How to create unit conversions and translation type

    hi,
        i need to create translation typre for unit conversion, plese provide with tcode for translation creation and table for seeing the unit conversion rates

    TCode for Unit Conversion : RSUOM
    Table: T006
    Hope this helps

  • Algebraic mode - unit conversions

    Can you use the HP 35s unit conversion functions on the key board while in algebraic mode [AGL]?  The keystrokes are given for RPN mode but not AGL.  If you can used them in AGL mode, what are the keystrokes>

    Hi!, M35s: You can download the Hewlett_Packard_Training_Aids HP-35s.pdf, from the Web ... [PDF]HP 35s Training Aidssliderule.mraiow.com/w/.../0/.../Hewlett_Packard_HP-35s_Training_Aids.p...HP provides these training aids to help readers learn about the HP 35s, or to gain ... Thetraining aids use special symbols to show keys on the HP 35s and ...

Maybe you are looking for