Unit cost of material from the PO for a specific time

Hi gurus,
is there a report that can give us what the unit cost of a material was during a given time frame. The cost we are looking at is the PO price. For example we would want to be able to see OK what was the cost of Part A from 03/01/09 to 03/31/2009 or on 3/1/2009.
Thanks
Anusha

hi,
For material group / vendor you get the purchasing values..
for that check: MC$4 : for vendor..
MC$< : for material group
But material price can;t be taken out directly, just because material master data is independent of vendor master data...and both together comes into picture when they are procured from the given vendor...
Regards
Priyanka.P

Similar Messages

  • Unit Costing in Material components

    Dear Experts,
    I have come across a requirement where dummy materials are to be used for cost planning. These materials wonu2019t be processed any further. The planned cost for these materials is project specific ie. Material A in Project 001 costs 1 $ while same material in Project 002 costs 5$.
    We are planning to use unit costing to cater this requirement. Unit costing works for Item category L.
    The planned cost from Unit costing for material is considered when we create u201Creservation + purchaser requisitionu201D for WBS element for the material.
    On Creating u201Creservationu201D for WBS element, the planned cost from Unit costing is ignored and the planned price is calculated as per the valuation strategy maintained in the Network costing variant (valaution variant). However it is intended that the cost for unit costing is to be considered for reservation for WBS.
    We are using std. costing variant PS04 for material costing.
    Is there something I am missing so that the planned cost for material from Unit costing is considered in case of reservation for WBS?
    Regards
    Sejo

    Phoenixcfa & Ahmed,
    Thanks for ur inputs.
    I had already thought of the option you have suggested. In the currect process, the "Res / Purc. req." is maintained as "Immediate" at network header level. So the activity also inherits the same reservation relevance & it cannot be changed from "immediate" to "Never".
    As suggested by Phoenixcfa it has some thing to do with split valuation. I could carry out the unit costing for a material with "res. for WBS" in IDES.
    Hope, I will figure why it doesnot work our Dev system, soon.
    Regards
    Sejo

  • I've just bought an iPhone 5S in the UK, seems like a big mistake. I have turned off sync to icloud from the phone for both my contacts and calendar, as told on itunes. However, iTunes still says they are synced from iCloud and wont sync to PC, Fix ?

    I've just bought an iPhone 5S in the UK, seems like a big mistake, but luckily by law we can return goods, which is exactly what is going to happen if I cant get this to work. This is my business phone, not having it functional can cost me money.
    I have turned off sync to icloud from the phone for both my contacts and calendar, as told on itunes. However, iTunes still says they are synced from iCloud and wont sync to my PC, why and how do I fix it so that it doesnt go to iCloud for anything ?
    The phone currently has no contacts or calendar information installed.
    PC is HP Probook 4730s running Windows 7, Professional, version 6.1.7601 Service Pack 1 Build 7601.

    I'm happy you figured it out and just try to keep in mind that not everyone you talk to at support will give the same advice or have the same knowledge. Just like those who contribute to these forums. Sometimes Google is your best friend.
    I agree that Apple could probably make it easier, but as of yet prefer security over freedom. (sound famaliar?)
    Anyway, if you choose to do so, you can leave feedback here:
    Apple.com Feedback
    Apple Support Feedback
    Developer Feedback
    Product Feedback
    QuickTime Feedback
    Search Feedback

  • Error while reading the ID of own business system from the SLD for system

    Hello,
    I try to send master material data from a 4.7 system via XI 3.0 to an autoID Infrastructure system 2.1. All Communication Channels, Receiver Agreements, Receiver and Interface Agreements are configured. The IDOC gets propper into the XI, Inbound Message is "green". Now, I get the following message:
      <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Call Adapter
      -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
      <SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="INTERNAL">SLD_NO_OWN_BS</SAP:Code>
      <SAP:P1>ZTA</SAP:P1>
      <SAP:P2>013</SAP:P2>
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>Error while reading the ID of own business system from the SLD for system ZTA and client 013</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>
    Can anybody help me?

    Probably, its due to incorrect RFC Adapter properties in config.
    Go to Integration COnfiguration. Double Click on the Business System for your R/3 system. On the right hand screen, Click  on Service-->Adapter Specific Parameters.
    Check whether the Logical System Name comes up as SAP<SID> and whether R/3 system ID and Client are appropriate.
    If these values are inappropriate, make changes to the corresponding Technical System defined in the SLD. After you have made the necessary corrections, come back to Integration COnfiguration, Double click on Business SYstem for R/3. Switch to Edit Mode. Click on Service-> Adapter Specific Parameters and then click on the Icon between Apply and Cancel buttons, inorder to compare with SLD and make those values reflect in config. Then click on Apply and Save the Business System.
    After this, you can retry sending the message.
    Rgds
    R Chandrasekhar

  • HT1657 If I rent a movie & decide to buy it later... Will the rental cost be deducted from the movie purchase cost? (E.g. $19.99 - $2.99)

    If I rent a movie & decide to buy it later... Will the rental cost be deducted from the movie purchase cost? (E.g. $19.99 - $2.99)

    No, you will be charged the full price, there is no discount for having previously rented it.

  • Would like to know why I have twice removed from the account for $ 1

    Would like to know why I have twice removed from the account for $ 1

    Your post makes no sense in English. 

  • Error while reading ID of own business system from the SLD for system D18

    Dear guru's,
    I have almost completed a file2proxy scenario but I'm stuk on the following.
    When sending a message the outbound adapter says:
    <b>Error while reading ID of own business system from the SLD for system D18 and client 200</b>
    What's the problem? I'm using a HTTP connection in the comm. channel. In this http connection a user with SAP_ALL is defined.
    Any suggestions?
      <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Call Adapter
      -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
      <SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="INTERNAL">SLD_NO_OWN_BS</SAP:Code>
      <SAP:P1>D18</SAP:P1>
      <SAP:P2>200</SAP:P2>
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>Error while reading ID of own business system from the SLD for system D18 and client 200</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>

    Login to system D18 and client 200 and check the TC SLDCHECK and also as per my pervious message check the entries in the SLDAPICUST, it should point to the Server on which SLD is present usually XI server https.
    Actually what happens in this error is when you are done with the configuration part in the ID, you are trying to eceute the scenario File to proxy, when it comes to identify the receiver system which is D18 clnt 200, it goes to SLD to check it and SLD is trying to ping to the machine D18 this connection is set from the TC SLDAPICUST on the machine D18.
    here the problem is that either the D18 is not able to ping to the SLD and also try refreshing the SLD cache.
    Hope you problem is fixed

  • Error while reading ID of own business system from the SLD for system DPI

    Hi All,
    My sceanrio is Proxy to JDBC. and its B2B. am sending the data from BI system and based on the country field from the source, table is decided and value is updated in the table.
    In RWB->Component Monitoring->Adapter Engine->Test Message, I have given the Sender component,Receiver Party,Receiver component,Interface,Interface Namespace,userid and password,Quality of Service and pasted the payload.
    Now I am getting the error :Error While Sending Message: Error stack from response: Error while reading ID of own business system from the SLD for system DPI and client 001 Internal error in Landscape Directory
    Please help me out.
    Thanks
    Kiruthi
    Edited by: kiruthiga balusamy on Nov 24, 2009 4:02 PM

    Hi,
    Check transaction SLDAPICUST for correct SLD configuration.
    http://help.sap.com/saphelp_nw70/helpdata/EN/0b/8512417301ee6fe10000000a1550b0/content.htm
    ~Sanv...

  • Hello, I am running Mac os 10.6.8. It is shutting down without warning when I walk away from the computer for about 5 minutes. It happened twice. It was not asleep, i had to turn the computer back on...Any ideas...

    Hello, I am running Mac os 10.6.8. It is shutting down without warning when I walk away from the computer for about 5 minutes. It happened twice. It was not asleep, i had to turn the computer back on...Any ideas...
    G. Mendel

    Crashes
    The next time the problem happens, note the date and time the problem occurred, then go to Applications/Utilities/Console and copy the log starting at the time of the crash. Paste the log in a reply. Please do not use a screen shot as they can be hard to read. If there are repeated runs of the same messages, please post only one run. Be selective about what you post and don’t  post huge amounts. Make sure there is no personal data visible. Information learned from Linc Davis.

  • I follow the instructions of swiping up from the bottom for the control panel, but nothing appears. What am I doing wrong or what do I need to be turned on or off?

    I follow the instructions of swiping up from the bottom for the control panel, but nothing appears. What am I doing wrong or what do I need to be turned on or off?

    "If you're on your home screen, where your apps and folders are, you can't."
    I can on mine.
    For anyone having this issue, take your device out of the case and try it naked before trying a reset, restore or Genius Bar appointment.

  • I need a Functional module to get the header material from the component .

    Dear Guru's
    Please help me .
    I need a name of the Functional module to get the header material from the component .
    As in if I put the Component in the Input I should get ALL the Main header materials using this Component.
    Regards,
    Roshan Lilaram Wadhwani.

    This was not answered

  • How to get data from the user for an Insert Trigger ?

    Hi all and thanks in advance, I need to get some values from the user for a child table when a row inserted into the parent table, is that possible to use ampersand inside an "Insert Trigger" to let the user for inserting some values ?
    Edited by: user9942078 on 17-Dec-2008 16:35

    In a different words,
    When a virus attacked your body your blood cells instantly goes into operation. Just like that -> your trigger activated as a result of your DB operation on objects. So, here also you have no option to manually intervene anything.
    Hmm... Looks like some science fiction movies ultimately pays some price... ;)
    So, trigger basically fires implicitly as a result of any database operation on objects or even on user.
    So, that has to be automatic. And, when you are using & it will ask for some input value - which cannot be done in case of triggers.
    For details please refer the oracle docs.
    Regards.
    Satyaki De.

  • TS3276 can anyone help on the following please. When I have been away from the office for a few days and check for emails it only supplies the most recent 100 emails and the ones before that are never received. thanks

    can anyone help on the following please. When I have been away from the office for a few days and check for emails it only supplies the most recent 100 emails and the ones before that are never received. thanks

    Does your server have a limit?

  • How the data is fetched from the cube for reporting - with and without BIA

    hi all,
    I need to understand the below scenario:(as to how the data is fetched from the cube for reporting)
    I have a query, on a multiprovider connected to cubes say A and B. A is on BIA index, B is not. There are no aggregates created on both the cubes.
    CASE 1: I have taken RSRT stats with BIA on, in aggregation layer it says
    Basic InfoProvider     *****Table type      ***** Viewed at      ***** Records, Selected     *****Records, Transported
    Cube A     ***** blank ***** 0.624305      ***** 8,087,502      ***** 2,011
    Cube B     ***** E ***** 42.002653 ***** 1,669,126      ***** 6
    Cube B     ***** F ***** 98.696442 ***** 2,426,006 ***** 6
    CASE 2:I have taken the RSRT stats, disabling the BIA index, in aggregation layer it says:
    Basic InfoProvider     *****Table Type     *****Viewed at     *****Records, Selected     *****Records, Transported
    Cube B     *****E     *****46.620825     ****1,669,126****     6
    Cube B     *****F     ****106.148337****     2,426,030*****     6
    Cube A     *****E     *****61.939073     *****3,794,113     *****3,499
    Cube A     *****F     ****90.721171****     4,293,420     *****5,584
    now my question is why is here a huge difference in the number of records transported for cube A when compared to case 1. The input criteria for both the cases are the same and the result output is matching. There is no change in the number of records selected for cube A in both cases.It is 8,087,502 in both cases.
    Can someone pls clarify on this difference in records being selected.

    Hi,
    yes, Vitaliy could be guess right. Please check if FEMS compression is enabled (note 1308274).
    What you can do to get more details about the selection is to activate the execurtion plan SQL/BWA queries in data manager. You can also activate the trace functions for BWA in RSRT. So you need to know how both queries select its data.
    Regards,
    Jens

  • How the data is fetched from the cube for reporting

    hi all,
    I need to understand the below scenario:(as to how the data is fetched from the cube for reporting)
    I have a query, on a multiprovider connected to cubes say A and B. A is on BIA index, B is not. There are no aggregates created on both the cubes.
    CASE 1:  I have taken RSRT stats with BIA on, in aggregation layer it says
    Basic InfoProvider     *****Table type      ***** Viewed at          ***** Records, Selected     *****Records, Transported
    Cube A     *****             blank                 *****           0.624305         *****          8,087,502        *****             2,011
    Cube B     *****                     E   *****                      42.002653  *****                  1,669,126            *****                    6
    Cube B     *****                     F  *****                     98.696442    *****                  2,426,006       *****                    6
    CASE 2:I have taken the RSRT stats, disabling the BIA index, in aggregation layer it says:
    Basic InfoProvider     *****Table Type     *****Viewed at     *****Records, Selected     *****Records, Transported
    Cube B     *****E     *****46.620825     ****1,669,126****     6
    Cube B     *****F     ****106.148337****     2,426,030*****     6
    Cube A     *****E     *****61.939073     *****3,794,113     *****3,499
    Cube A     *****F     ****90.721171****     4,293,420     *****5,584
    now my question is why is here a huge difference in the number of records transported for cube A when compared to case 1. The input criteria for both the cases are the same and the result output is matching. There is no change in the number of records selected for cube A in both cases.It is 8,087,502 in both cases.
    Can someone pls clarify on this difference in records being selected.

    Hi Jay,
    Thanks for sharing your analysis.
    The only reason I could think logically is BWA is having information in both E and F tables in one place and hence after selecting the records, it is able to aggregate and transport the reords to OLAP.
    In the second case, since E and F tables are separate, aggregation might be happening at OLAP and hence you see more number of records.
    Our Experts in BWA forum might be able to answer in a better way, if you post this question over there.
    Thanks,
    Krishnan

Maybe you are looking for

  • Ow do I set up multiple itunes libraries on one computer?

    I already have itunes set up on my desktop.  My daughter library was set up on my laptop, which is no longer working (the whole lap top).  I want to be able to set up another library on the desktiop to manage her library.  Can I do this and then sync

  • Query takes large time to execute

    Hi, These are interview questions: 1. If the query takes lot of time to execute, what should be the preliminary analysis done by a DBA 2. If we have system, users, rollback and temporary tablespaces, 2 disks disk1 and disk2, how should the tablespace

  • UnsatisfiedLinkError: Attempt to access invalid address

    If I try to run my JavaAppl, I always get the following message. Something seems to be wrong with the operation call uread() of the Library foxapi.lib. If I disable this operation (with //), I get the Defaultvalue=5 back. So the jni seems to work. Bu

  • Hierarchical tree take  lot of time to populate

    Hello fellows I have a form using hierarchical list. when populate it from the record group it take lot of time. this record group is using four loops and outer loop range is from 1 to 3000 and all inner loops range is from 1 to 3, Oracle.exe get tim

  • Cannot open the Microsoft Jet engine workgroup information file

    Hi, I have 4 linked servers in a SQL Server database.  One of them is another sql server database.  This one works fine.  I have 3 that are Access databases.  Last week I could run a query against these linked servers, but now when I open SQL Server