Unit Costing in Standard Networks

Hi experts,
I would like to use Unit Costing (Unit Cost Estimate) in Cost Activities of Standard Networks is it possible? I'm using Tcode CN01 to create standard networks
Thanks,

>
mforman wrote:
Unit Costing (Unit Cost Estimate) in Cost Activities of Standard Networks is it possible? I'm using Tcode CN01,
>
mforman wrote:
>  CN01,  there is no button as in CJ20N.
>
answer is there...!

Similar Messages

  • PS table structure for Unit Costing

    Hi,
    The requirement is:
    For every Network -> Network Activity combination , we need to get the Unit Costing for each Network Activity.
    We have tried with CKHS and CKIS tables but we couldnt get a link.
    The output should be of the form:
    Network     Network Activity     Cost Element     Qty     Rate     Amt
    Could anybody suggest what are the standard tables and linkages to get this out.
    Regards
    Syam

    AFVV-PEDD

  • Standard Network Cost

    Hi,
    I have created Standard network with activities and assigned work center and activity type. I want to see the cost of the standard network. can one please tell where to check for the same in the standard network.
    Rgds,
    Prasad

    Hi Prasad,
    It is true that it is not possible to see the cost of any std network, only when it becomes an operative network it has an actual cost.
    Please jot down ur requirements properly.
    regards
    sunil kar

  • Is it Possible to do easy cost planning in network and acitivity level

    Hi,
    Is it possible to do easy cost planning in network and acitivity level
    Rgds
    Purna.M

    Dear Sanjeev,
    ECP not possible at Network or activities but it is not like that as you saying " any of cost planning not possible at activity level as per sap standard."
    It is possible to do Network Cost Planning, for that you have to make the settings required for to determining the plan costs in networks.
    In networks/activities the plan costs are:
    Calculated automatically on the basis of the defined price and quantity structures
    Planned using unit costings for general costs activities or material components
    for this make the setting in config of PS node Project System -> Cost -> Planned Costs -> Automatic Costing in Networks/Activities.
    Rgds
    Rajesh

  • Unit Cost of non stock material - Hubwoo Catalogue

    Hi Team,
    There is one requirement to transfer the the cost of matrial from SAP PM to ArcFM. Here the materials are assigned to the operations in the PM order. Here we want to transfer the service cost and material cost of the particular operation to the ArcFM ( ie an external design tool) to estmate the total cost involved for the particular operation.
    Here the unit cost of the stock material can be get from the material master. But for nonstock material, a hubwoo catalogue is maitained. How do we get the unit cost for the this material?
    There is an interfece we have to develop to transfer the service cost and material cost from the SAP to ArcFM. Hence we have to get the unit cost of the non stock material here.
    Thanks in advance.
    Regards,
    Shyjith

    Hi,
    Yes, you are right but in material master price is not updating, many times I have been assigned the same material as a non stock and at every time I have maintained the planned price on order level but it is still maintained as "0" value in material master,
    what is the standard process?
    what settings need to be made to get automatically planned price or last purchased price for a non stock material?

  • Unit costing for materials assigned to activity - for material cost plannin

    The requirement is that material cost to the company will vary depending upon the project/customer. Eg.: Material cost = basic material cost + a % for P&F + 2 % for Clearance + a % for excise + 2 % for insurance + a % for Customs
    It can be a % or a lump-sum value. It can be all the components listed or part of them. This will be project specific.
    Hence the following preference for material cost planning is required:
    1. Material cost based on quotation or Purchase order - If quote/PO is not available, then
    2.Material cost based on unit costing done for the material in the project - If this is not available, then
    3. material cost from material master depending on price indicator i.e. Std cost or Moving average price
    We are working with valuated project stock.
    SAP Help says"
    "Prices are calculated in one of the following ways:
    u2022     Using the strategy in the valuation variant
    u2022     Manually, using the invoicing plan
    u2022     Using unit costing"
    But how to get the cost as per the priority required when these three options are there is not clear.
    I have tried to work with valuation variant in the costing variant assigned to Network. No valuation strategy explicitly refers to unit costing of material.
    During various testings, at times, unit costing of material gets updated as planned cost; at times not. What triggers in also not clear.
    Pl. clarify
    Thanks and regards
    A.Saravanan

    Hi All
    I have psoted to service market place and got the reply; we have implemented also.
    there were 2 suggestiosn:
    1. Valuation price with user exit - (EXIT_SAPLCK21_002) - This user exit has to be implemented; we have implemented - it is working. But this is taking effect when overhead calculation is done - this we rae managing that way now
    2. Alternatively you can try to use BAdI VALUATION_CK.: This BADI is not editable by us now; SAP has not released for our editing!
    The problem is solved although
    There is one more clarification  required:
    As SAP Help documentation: -> Unit costing is used instead of strategy sequence, but not in between steps of strategy.
    How to get this done ? right now we are using the strategy - inbetween steps of strategy with user exit
    Thanks and regards
    A.Saravanan

  • Detailed Report on Unit Cost Planning.

    Hi friends,
    I am doing Unit Costing in my Project in Version 1.
    Is there any standard report where I can get a display of all the Materials & services or (say) any Misc cost obtained thru Arithmatic Operation in the Unit Costing?
    That is to say the detailed report of whatever is done in the Unit Cost Planning.
    I am only getting the report of Planned Cost on Overall Basis.
    Secondly, in Unit Costing if I do any arithmatic Operation on the total value or on a particular row, then the value obtained from the arithmatic operation is not getting displayed in the cost Planning report.
    Thanks in advance.
    Regards,
    Abhra Bose.

    Hi Abhra,
    UC Method is only to plan the project cost estimates. There is no such standard report to get the detailed plan report in terms of material, resources and Miscellaneous (tru Arithmatic calculations) except cost element report ( that to interms of cost only). 
    As you said, you can only get the Overall Planned total in Hierarchical report (i.e like S_ALR_87013532 - Plan/Actual/Variance ) including arithmatic calculations. but If you check in Cost element report ( i.e like S_ALR_87013542 - Actual/Commitment/Total/Plan in CO Area Currency ) you can get all planned cost that is planned against specific cost element, since it is a cost elements based report only.) If you want the planned cost tru arithmatic calculations also, you need to specify a cost element against that line item either in BPO or at WBS level.
    Hope this will help you some extent.
    Appreciated for giving points.
    Regards,
    Hari Krishna.K

  • Copy of standard network

    Hi Friends,
    I am trying to copy standard network template in CN01 but all activities are coming by default, I want to remove the activities but when i try to delete them I am getting message CP654- You can only select created records.
    Kindly help.
    Thanks & Regards
    Bhairavi

    Hi Ammar,
    Thanks for your reply.
    I tried that also. When I use copy function all the activities which are present come in my network as gray out & remaining one come in normal mode. When I remove WBS assigned to these from total tab& then try to delete i am able to do so but still it doesnt get updated.
    Forexample, In the network template 730 activities are there in primary costs tab . These gets copied in gray out , but rest i.e.740 onwards are copied & these I want to delete , but system is not allowing me to do so. i am using CN02.
    After removing WBS , I am able to delete but its not getting saved.
    In create std network option, all the activities are coming & these are also i am not able to delete.
    Kindly help.
    Thanks & Regards
    bhairavi

  • Cost Planning on Network Activities

    Hi,
    Can any one help me to enter planned cost on network activities with out using capacity planning.
    Thanks
    Murtaza

    Dear Murtaza,
    Refer below sap help link for Cost planning in Network Activities.
    http://help.sap.com/saphelp_46C/helpdata/EN/86/98853478616434e10000009b38f83b/frameset.htm
    Click on above link follow the menu path
    Cost Planning > Cost Planning in Networks > Network Planned Costs > Basis Values for Network Costings
    Cost Planning > Cost Planning in Networks > Network Planned Costs > Unit Costing in Networks
    Hope its useful.
    Sandeep

  • Standard Network with Standard WBS not creating the project

    Hi,
    I've got existing Network templates set up for various company codes. The std networks are linked to std wbs elements. This creates a full project structure when coping the standard network in CJ20N.
    However, on an existing company code and plant, I am creating a network template with std wbs assignment, the point at which the other networks jump to the WBS create screen to replace WBS / Proj numbers etc... is NOT HAPPENING. The system immediately asks for a OPERATIVE WBS to be entered.
    This company code specifically requested in the past that that their users only use operative WBS elements. Question: Where is it possible to set this restriction for a specific company code / org unit so the std network ignores the std wbs assignment and requests an operative WBS entry?
    Thanks
    Kru

    Hi Krushan,
    I am not clear what you need here?? Is it that you want to remove the check which is asking for a Operative WBS instead of standard for a particular company code?
    My guess would be to check for any enhancements done for CJ01 tcode, using SMOD or CMOD.
    Hope it helps you.
    Cheers
    Sammar

  • Unit Costing in Material components

    Dear Experts,
    I have come across a requirement where dummy materials are to be used for cost planning. These materials wonu2019t be processed any further. The planned cost for these materials is project specific ie. Material A in Project 001 costs 1 $ while same material in Project 002 costs 5$.
    We are planning to use unit costing to cater this requirement. Unit costing works for Item category L.
    The planned cost from Unit costing for material is considered when we create u201Creservation + purchaser requisitionu201D for WBS element for the material.
    On Creating u201Creservationu201D for WBS element, the planned cost from Unit costing is ignored and the planned price is calculated as per the valuation strategy maintained in the Network costing variant (valaution variant). However it is intended that the cost for unit costing is to be considered for reservation for WBS.
    We are using std. costing variant PS04 for material costing.
    Is there something I am missing so that the planned cost for material from Unit costing is considered in case of reservation for WBS?
    Regards
    Sejo

    Phoenixcfa & Ahmed,
    Thanks for ur inputs.
    I had already thought of the option you have suggested. In the currect process, the "Res / Purc. req." is maintained as "Immediate" at network header level. So the activity also inherits the same reservation relevance & it cannot be changed from "immediate" to "Never".
    As suggested by Phoenixcfa it has some thing to do with split valuation. I could carry out the unit costing for a material with "res. for WBS" in IDES.
    Hope, I will figure why it doesnot work our Dev system, soon.
    Regards
    Sejo

  • Product cost or Product unit cost

    Hi,
    Does anyone know if there is any standard content for product cost or Product unit cost?  Please let me know.  I don't know under which area this belongs to ie SD, MM....etc.
    thanks
    Sabrina.

    Hi Sabrina,
    You can evaluate CO-PC datasources in your R/3 system and the corresponding sources, objects etc. in BC.
    Also you may look at Product Cost Controlling Analyses at BI best practice:
    https://media.sdn.sap.com/html/submitted_docs/Best_Practices/BW/index.htm
    Best regards,
    Eugene

  • Report requiring per unit cost

    Hi,
    Is there any standard report in SAP showing per tonne cost if unit of measurement is tonnes or per hour cost. I need the report showing the cost per tonnes for all the expenses. Please reply immediately.

    What tyoe of production process you have?
    In any costing report KKF6n or in COo2 you have a costing base (value base)
    Absolute or per unit cost
    If you choose Absolute, then system will show the full cost of the product and if you choose per unit, thne system will show per unit cost of the product.
    please come back

  • Unit Cost Planning (UCP) - Plan Integrated Object error.

    Dear All,
    Presently I am using Network Planning and have Plan Integrated Object Active. So that system does not allow to use UCP and gives following error.
    Error: Unit costing is not allowed in plan integrated objects
    My  question is how can system will allow to use unit costing in this setting and what will be effect after removing plan integrated object.
    Your inputs are appreaciated in advance.
    Regards.

    Hello Pal,
    Thanks for your kind and immediate response. If i remove the integrated planning ticked then my planning will be only for the sake of statistical purpose right and from that i cannot trigger any quotation.
    Could you please guide me on this
    Regards
    Praveen B M

  • Unit costing

    Hi Guys,
    Can you suggest about the applicability of unit costing during cost planning phase of the project.?
    It requires masters to be created for service,material,activities etc.

    Hi madhuka/ Devdut...
    In case of Unit costing date relevency will not be there..( if you preferr unit costing in CJ40) and if you preferr UT in CJ20N it is there since that cost will come in network costing... so, in case of network costing date relevancy is there.
    for material, activities, services, info records should be aviailable for UT... but in some scenario we may not no the cost of perticular activity / material / service at that time you can use variable item and can plan cost manually as per recieved quotations from vendors,or based on your previous experience.....
    you can use operative indicators effectively..... just Explore yoursself/.....
    Venkatesh

Maybe you are looking for