Unit crashes and white light flashes very fast and tv screen goes blank

Apple TV crashes after a half hour of viewing and white light continues to flash very fast and tv screen goes blank

Welcome to the Apple Community.
If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Devices list, and then click Restore.
(You may already have a micro USB cable if you have a camera or other digital device)

Similar Messages

  • TS3276 I cannot send mail. I have logged into my SP through the internet and have no problem I have tried to rebuild the inbox and it just flashes very fast - to fast to view the activity. The mail doctor shows all green lights.

    I cannot send mail. I have logged into my SP through the internet and have no problem I have tried to rebuild the inbox and it just flashes very fast - to fast to view the activity. The mail doctor shows all green lights. This started after I disabled ICloud. I had to disable ICloud as I was not receiving all my mail.

    I cannot send mail. I have logged into my SP through the internet and have no problem I have tried to rebuild the inbox and it just flashes very fast - to fast to view the activity. The mail doctor shows all green lights. This started after I disabled ICloud. I had to disable ICloud as I was not receiving all my mail.

  • Screen flashes very fast and and audible sound seems to be alarming

    screen flashes very fast and and audible sound seems to be alarming

    Welcome to the Apple Community.
    If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
    Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
    Connect the micro USB cable to the Apple TV and to your computer.
    Reconnect the power cable (only for Apple TV 3)
    Open iTunes.
    Select your Apple TV in the Devices list, and then click Restore.
    (You may already have a micro USB cable if you have a camera or other digital device)

  • My macbook air wont boot up. Just beeps every 5 seconds and a white light flashes on front of keyboard

    My macbook air wont boot up. Just beeps every 5 seconds and a white light flashes on front of keyboard

    That normally indicates an issue with system memory. The startup sequence can't complete the boot due to a memory issue. Take it in for service.

  • My Apple TV is not responding anymore and white light flickers

    My Apple TV does not respond anymore  and white light flickers all the Time. No connection anymore.

    In that case if you've already tried unplugging from power, waiting for a minute or so and restarting and nothing helps, you probably ned to factory restore via iTunes:
    Apple TV (2nd and 3rd generation): Restoring your Apple TV

  • Blinking lights across ipod ttouch and white light strip at the bottom

    there is kind a lightening across I pod touch and white light strip at the bottom ? does it need to replace battery or there is some reason ? some time it display is normal bit then it starts again ???

    Try:
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings                            
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes      
    - Restore to factory settings/new iOS device.                       
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
      Apple Retail Store - Genius Bar                              

  • Hey my iPod is not showing up on iTunes and my computer doesn't recognize it. It runs out of battery very fast and only shows the 'Connect to iTunes" screen. What do I do?

    Hey my iPod is not showing up on iTunes and my computer doesn't recognize it. It runs out of battery very fast and only shows the 'Connect to iTunes" screen. What do I do?

    http://support.apple.com/kb/ht1808
    http://support.apple.com/kb/ts1567
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

  • My iphone 5, with iOS 7.0.2, is heating and consuming the battery very fast when 3G is on, even when I'm not using it. Any solution?

    My iphone 5, with iOS 7.0.2, is heating and consuming the battery very fast when 3G is on, even when I'm not using it. Any solution?

    iOS 7 has many multiple tasks. You can save battery life to some extent by few steps. First go to location services and bettr 'Off' them which are not needed. (Ex. Notes.. Reminders.. Etc). Also you can off few apps in 'get notifications' centre. Also usage of 3g by any mobile consumes much battery life. Better to connect any Wi-fi

  • HT5706 my apple tv light is blinking fast and telling me to hook it up to itunes

    apple tv light is blinking fast and telling me to hook it up to itunes. is there any other way to fix this?

    No.
    You could take it to an Apple store for them to do it.
    See:
    http://support.apple.com/kb/HT4367
    Pay attention to differences in power connection depending on whether or not you have AppleTV2 or AppleTV 3.

  • HT200154 my apple tv 3rd gen is blinking a white light all the time and won't show any video on my tv what do I do

    I recently updated my apple tv software anvd now it just constantly blinks a white light in the front and will show no video to my tv what do I do

    Welcome to the Apple Community.
    Try the following steps, check whether things are working after each step where appropriate, before trying the next.
    Restart the Apple TV (Settings > General > Restart).
    Restart the Apple TV by removing ALL the cables for 30 seconds.
    Restart your router. (Also try removing it’s power cord for at least 30 seconds)
    Reset the Apple TV (Settings > General > Reset > Reset all settings)
    Restore the Apple TV (Settings > General > Reset > Restore)

  • Mac Pro, Lion: front light flashing, fans blowing, and doesn't startup...

    This has never happened before: my Mac Pro's (Lion) front light flashing, fans blowing, and doesn't startup...
    Any workaround? Help, please...

    If there is no response to keyboard or powerbutton presses; hold power button until it shuts off. Unplug and wait 5 minutes and then plug back in and try to start again.
    Post back with results.

  • HT1414 my battery dies very fast and my home button doesnt work many times.

    my battery dies very fast and my home button doesnt work many times.

    iOS: Device not recognized in iTunes for Windows
    I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    New cable and different USB port?
    Runs this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Try on another computer to help determine if computer or iPod problem
    Try using this program to place the iPod in recovery mode
    RecBoot: Easy Way to Put iPhone into Recovery Mode

  • Orange and white light on processor light.

    orange and white light on processor light. what does it mean?

    How can I tell if my mac is charging?
    The light on the MagSafe adapter will be orange. You can also check in the menu bar if you enable "Show battery status in menu bar" in system preferences > energy saver
    Also, do I have to turn off the computer to charge my battery?
    No
    What is the best way to get the most out of my battery, keep it plugged in? use with out the electric being plugged in?
    If it is convenient then keep it plugged in, but for extended time like weeks, let it run down about 15% every few days.
    Also don't let it run out completely, again only if it is convenient.
    To be honest just use it when and where you need it. Not doing the above is not going to do massive damage to your MacBook, they are just tips which you should bear in mind and follow them if doing so is not detrimental to your work.

  • Dv4-1365dx Caps and scroll lights flash 4 times.

    When I turn on my computer, the hard drive starts but then stops. The lights on the touchbar (next to the power button) come on, but the screen does not. Then, the caps lock and scroll lights flash 4 times in sequence. My warranty expired last year, what do I need to do to fix my problem?
    This question was solved.
    View Solution.

    If the hard reset suggested by Erico does not resolve the problem,
    I think it is a hardware issue with graphics if the leds are blinking 4 times. Refer the following weblink:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01443366&cc=us&lc=en&dlc=en
    I am an HP employee.
    Regards,
    Vidya
    Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
    ***Click on "Thumbs up" button to the bottom right side of my post to say thanks!***

  • Desktop Computer dc5750 shuts down and red light flashes on front of computer and won't start at all

    I have a DC5750 HP Compaq Computer it is 6 years old, but I have 4GB Ram, Nvidia GS8400 Graphics Card, two one TB Hard Drives. While I tried to re-installed my operating systems it all of a sudden shut down not once but twice, I opened up the side of the computer and found that it was hotter then normal. I let it sit for a while thinking it maybe over heating after hooking it back up I turned it on again nothing happened except a beeping noise and red lights flashing on the front. Can this be fixed as money is an issue.
    Thanks
    Rob

    Hi, Rob:
    Please review Appendix A. starting on page 56 of the Troubleshooting Guide at the link below to interpret the beep codes and see the probable causes and recommended troubleshooting steps.
    http://h20566.www2.hp.com/portal/site/hpsc/templat​e.BINARYPORTLET/public/kb/docDisplay/resource.proc​...

Maybe you are looking for

  • Safari Hanging

    Yet one more issue to try to figure out. Since I started using my new iMac I have been getting periodic freezing in Safari and the web often seems much slower than it should. This forum has been a particular problem today, often hanging for a good 10

  • Need a way to make background sound continuous when combining clips?

    I suspect the answer to this is that it can't be done in iMovie 8 and I need to use iMovie HD, but let me ask anyway. Perhaps one of you can tell me a clever way to do this. I am creating a home movie of a wedding, in which there is background music

  • Get spool number for delivery output.

    Hi, Is it possible to get the spool number for a print output type generated for a delivery? I use the Tcode VL02N to view the output types generated for a delivery. I want to use this spool number to generate a PDF file.

  • What is the Business Content Extractor for HRP1000-OBJID ?????

    Hi all,     I want to extract the HRP1000-OBJID, HRP1000-SHORT, HRP1000-STEXT from R/3 in to BW.  The table name is HRP1000 (Info Type 1000 DB Table).     What is the Business Content Extractor for these fields, please ?     Thanks in advance. Best r

  • How to display Error for a particular text box programaticaly

    Hello All, I have 5 text boxes in a form and I have a requirement where if user click on any of the text boxes then i need to pass the id to class A and show the error description related to that text box in faces message. I have created class A in w