Unit CS is not created in EN error

Hi Gurus,
After activating the datasource and trying to preview the data I got the ff error:
Unit CS is not created in EN
Can anyone pls help how to go round this issue.
Also I would be grateful if someone can help me to create a routine to multiply two fields/infoobject
and put the result in another InfoObject. Steps in creating the transformation and sample code will be very much appreciated.
Thanks.

hi anil,
the message indicated you haven't that unit value in t006a. from your previous posting, you do prefer upload to 0unit via flat file rather than maintain with transaction CUNI. have you successfully upload these unit master data to 0unit ?
hope this helps you. if it doesn't work go to in BI go to source systems tab. and select your source system -->Transfer Global Settings.
coming to your another query multiplying the two infoobjects. what you have to do create another info object- in the transformations use formula for the newly created info object- you have multpliplaction function available. multiply the objects you want to.
example- if you want to multiply netvalue and tax.
create new infoobject in the target as 0GROSSAMT.
Formula is 0GROSSAMT = NETVALUE*TAX.
thanks = points
get back to me if you are not clear
regards
vadlamudi

Similar Messages

Error '' Unit IN2 is not created in language EN"

Hi all, I have created new material using UoM as "2 (square Inch), when i am doing excise Invoice for the same material it is ginving me error that '' Unit IN2 is not created in language EN" while it is allowing me to do GRN without Exc Invoice.
i have tried to CUNI , there is no entry showing for unit of measurement for "2 or IN2 . i tried to maintained is is giving message
'Unit of measure IN2 already exists' if i checked table t006A it is showing the Enrty in EN & DE both language,
i have also teried
Goto --> translation --> unit of Measurement but not sure what to do there, i have save confirm translation for the "2 there but still same problem is appearing.
Please Guide Any helpful ans will be awarded full marks. thanks

In what language did you create this new unit?
when you start CUNI, in the initial screen choose from menu GOTO > Translation to translate your unit into english language.

Unit KG is not Created in language EN-- Error in MMBE

Dear Guru,
When i am running MMBE to verify the stock, system showing the stock as per parameters givien for Unit of Messasurement ( ex. EA.)
After Executing the report, at header level when i am chaing Unit of Messasurement ( Ex. to KG) system giving Error message
Unit KG is not Created in language EN
But when i am running mmbe by giving Unit of Messasurement KG and excuting ..its shows the report.
Y i am getting error message after excuting report and changing the UoM.
Plz guide me.
Regards,
Venkat

Hi,
As with most SAP messages it is always a good idea to trust what it is saying.
The system is telling you that KG has not been created in the English language.
Go to transaction CUNI to check the settings.
Select the Unit of measure for "MASS" (from the drop down list) and check the entries for UOMs.
KG should be there and should have an English description (the message said it was not there for EN)
If it is there and set up correctly then there might have been something else in the UOM field? You didn't enter " KG" did you (a blank character then KG?)
Steve B

Error 'Unit ST is not created in language EN...' at conversion exit

Hi
When i try to load a flat file i have this error message :
Error 'Unit ST is not created in language EN...' at conversion exit CONVERSION_EXIT_CUNIT_INPUT (field SALES_UNIT record 1, value ST)
My source has unit field. in the field in have sometime PC or ST --> ST is coming from BW
But when i load the file it gives the error for ST value.
In my datasource i have the correct CUNIT conversion routine apply on the unit field
Thanks for your help
Cyril

Yes this value is not maintained in T006 table. that's why i have the problem.
So how to solve it.
I have an ETL tools which read my DSO tables and it extract ST so i need to convert it this value exist in BI (internal code of PC)
Cyril

Error 'Unit 1 is not created in language EN...' at conversion exit CONVERSI

Hi Experts,
I'm loading Flat File data of 1.5 Lacks record in to Cube. I'm encountering this error in InfoPack monitor.
Can anyone help to resolve this please.
Error 'Unit 1 is not created in language EN...' at conversion exit CONVERSION_EXIT_CUNIT_INPUT (field UNIT record 6628, value 1)
Thanks

It got resolved by checking the internal in the field selection tab of Datasource.

Unit ST is not created in language EN

Dear all,
we are using SRM 5.0 in the extended classical szenario.
Here we are facing a problem in transaction BBP_POC (Process PO):
When we try to add a new line to a PO we get the following error message "Unit ST is not created in language EN".
Although the first line was created with ST in EN.
Afterwards it is not possible at all to change the PO. We get the error message in every screen.
Thanks and regards
Achim

Hi
See this pointer / links below ->
Note 781669: Correction of BBP_CND_CUSTOMIZING_CHECK
Please maintain your ISO Code for ST in Tcode CUNI, the ISO code for ST supposed PCE and tick the primary code. After you maintain the ISO Code, try to retransfer the PR again from SMQ1, and if there's still error, check to SRM--Tcode SLG1, and see what's the error.
Related link ->
Re: Incorrect status in pricing - SRM server 5.5
Re: PR transfer error to SRM " Measurement unit ST has no ISO code"
Do let me know. Hope this will help.
Regards
- Atul

Unit STD is not created in language EN

Hi everyone,
During uploading of AP transactions,we got this error:
Unit STD is not created in language EN. I've checked tcode SE38 and tried to search for STD in language EN but it gives me the same warning/information. I also run RSDMD_CHECKPRG_ALL and it says that characteristic STD is not active and I need to activate that characteristic. How am I going to do that? Can somebody teach me how?
Thank you,
April

Hi April,
Actually, you need to create a STD UNIT, not a characteristic.
You may see here how to do it:
Re: 0Unit / se16 / CUNI
Best regards,
Eugene

Regarding table T006 "Message: Unit CDM is not created in language EN"

Hello Experts,
There is an issue in the T006 table.
With the SE16 transaction if I list all the unit existing in the table T006, I found the unit CDM.
If I list only the unit CDM, I have the error message : "unit CDM is not created in language EN".
If I list all the unit with EN language in the table T006A, I found the CDM unit.
How could you do to avoid this error message.
Thanks & regards
Tushar.

Hello Tushar
Check with tcode CUNI for definition of UOM. You need to chek the said UOM defined under Dimensions, ISO or UOM for language EN.
Amol

Unit JHR is not created in language EN

Dear All,
While creating billing document getting error 'Unit JHR is not created in language EN'. I checked all MM data, we did not update JHR unit for materials still we get error.
I checked JHR unit by using Transaction code 'CUNI'. JHR is available under dimension 'TIME'. JHR is available in data base tables T006 and T006A still system throws above error. Particularly for UOM 'JHR' getting above error.
Please provide the solution.
Thanks and Regards
Makarand

hi Makrand,
Go to CUNI. now in this follow the menu in first screen as
GO TO --> Translations --> Unit of Measuremnts
here select EN to EN

Crystal Server 2013: How to troubleshoot "Can not create temp file---- Error code:-2147215357"

We have a Java7 web app, which generate PDF report by calling Crystal Server 2013 SP4.
The app is being deployed on many different servers. We sometimes got the error below when generating report:
com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: Can not create temp file---- Error code:-2147215357 [CRSDK00000615] Error code name:internal
at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.controllerExportInternal(PrintOutputController.java:280)
at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(PrintOutputController.java:152)
at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(PrintOutputController.java:130)
at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(PrintOutputController.java:113)
Problem is, this seems to be a pretty generic exception. It could be caused by many different reasons.
e.g. network connection problem, wrong DB login, wrong folder path, lack of folder access right, etc.
Each time we could only guess what's wrong.
We are running into it again, and this time everything seems correctly configured so far.
We wonder if there are more info we can get to troubleshoot? For example, any log file of Crystal Server we should look into? Or does Crystal Server has debug mode which prints more details to tell us what goes wrong?

Prithviraj Shekhawat wrote:
Hi Henry,
I believe you are using RAS SDKs to export the reports to PDF.
Apply trace on RAS server and check what you find in RAS logs.
Check whether you can see timeout error is RAS logs. Usually if connection is lost and the RAS server no more have the session to write to the temp directory, we do see these errors.
Also, does the account that runs RAS have permissions to create a file in RAS's default temp directory? Are you getting any out of memory or out of disk space exceptions on App server or RAS, tracing RAS server is the way to move forward.
Thanks,
Prithvi
>>I believe you are using RAS SDKs to export the reports to PDF.
Yes
>>Apply trace on RAS server and check what you find in RAS logs.
>>Check whether you can see timeout error is RAS logs.
How to configure tracing, and where are RAS logs? Is it configured in CMC --> Servers --> Crystal Report Services?
>>Also, does the account that runs RAS have permissions to create
>>a file in RAS's default temp directory?
Pretty sure yes.
>> Are you getting any out of memory or out of disk space exceptions
>>on App server or RAS, tracing RAS server is the way to move forward.
Not on App server.
For RAS, that's the problem, I am not sure where to look.......

Can not create temp file---- Error code:-2147215357 [CRSDK00000615] Error code name:internal

Hello,
While exporting Export reporting from BI4 getting exception
Can not create temp file---- Error code:-2147215357 [CRSDK00000615] Error code name:internal
In Trace Log I am getting
com.crystaldecisions.xml.serialization.XMLWriter||Failed to create an object instance for CrystalReports.TextObjectFormat
java.util.MissingResourceException: Can't find resource for bundle java.util.PropertyResourceBundle, key CrystalReports.TextObjectFormat
at java.util.ResourceBundle.getObject(ResourceBundle.java:374)
at java.util.ResourceBundle.getString(ResourceBundle.java:334)
I tried following solution according to the all forums but still issue exist.
Done changes mention in KB article In <Installation-dir-of-BO>\Common\4.0\java\CRConfig.XML we have to increase the JAVA heap MIN and Max size
<JVMMaxHeap>64000000</JVMMaxHeap> <JVMMinHeap>32000000</JVMMinHeap>
Increase the value in the ReportApplicationServer Services in the CMC for "Number of database records to read when previewing or refreshing a report". The value -1 is for unlimited records but not recommended for performance.
Check for temporary read write permission on server
Using SDK library from C:\Program Files (x86)\SAP Business Objects\SAP BusinessObjects Enterprise XI 4.0\java\lib
Can you please let me know is there anything missing.

Hi,
We face the same problem with some BI4 reports.
The same report works well with the "Crystal Reports Viewers API", as used in Infoview, but not with the "Report Application Server (RAS) API".
This error appears after some time working on a report. If we reproduce the same report, but from zero, no problem.
Hope it can help.
Ludovic.

Bposting document not created(acccount determination error)

Dear All
when i am creating invoice in vf01, the system is unable to create accounting document
i have checked acc assignment of customer and material its their, but still its giveing erro
error in acc determination
this is the message iam geting
Bposting document not created(acccount determination error)
how to resolve this issue
Thanks
jahangir

Hi Jahangir,
Go to VF02 --> Enter --> In change overview screen --> Click at "Enviroment" (Menu) --> Click at "Acc. Determination Analysis" --> Click at "Revenue Accounts"
You can see the condition types there ---> Open the tree one by one --> see the details on right side --> check for which combination the G/L account is missing
Maintain the entry in VKOA.
After that come back to VF02 and release the document.
If the error still there then check the analysis, whether the required record determined or not.
Hope this helps.
Regards,
MT

PackageMaker and "Could not create temporary BOM" Error

I have spent the last couple of nights trying to figure out why PackageMaker 3.0.4 (179) wouldn't build a package and kept failing on "Could not create temporary BOM" error. In case someone else runs into this, point your package content to an actual directory (folder), not a symlink, that should resolve this issue.
PS. BOM stands for "Bill Of Materials", not "Byte Order Mark", which also threw me for a loop.

Originally Posted by AndersG
I think we need engineering to look at this. Any chance of opening an
SR?
Anders Gustafsson (NKP)
The Aaland Islands (N60 E20)
Have an idea for a product enhancement? Please visit:
http://www.novell.com/rms
Thanks we have logged a SR for this

Delete invoice for Service PO's where SES is not created - MR8M gives error

Members,
I have a strange situation at my client. They have created a service PO with S-based IV checked on the Invoice tab of PO. There is no Goods Receipt checked in the Delivey tab of the PO. They did not create any Service Entry Sheet (SES) for the service line items in the PO.
At the time of invoicing using MIRO, the user invoiced against the PO reference as there was no SES reference (because SES was not created). User now wants to reverse this MIRO because he made some mistake.
I tried reversing the invoice document using MR8M but it's giving error - "Invoice document 5105613514 cannot be processed further / Message no. M8422". In the possible causes, the error message explains that the corresponding service entry sheet may have been deleted. I strongly suspect this is the cause of getting this error - because since the SES was not created in the first place and as this is a service PO with S-based IV checked, SAP is looking for SES.
Now my dilemma is how to cancel this incorrectly entered invoice using MIRO? What are the options that I have - a credit memo? a subsequent Credit? or some program to be executed? Please share your ideas/ experience in solving this issue.
Thanks,
car

Hi,
Add one more service line in the Service tab of the PO and order it (restrict it to Print if in Production).
Now goto MR8M and cancel the old Invoice. (Folow instruction to delete line items under vendor through F-44)
Come back and deltete the newely added service line from the PO.
Flag the GR and GRbased IV indicators (as the Sr Based IV is greyed out) and order the PO (restrict it to Print if in Production).
The next time you will have to first do the Service Entry before doing the Invoice.
regards,
MRao

"Could not create the view" error

Hey everyone,
I'm new to Flash Builder and have been following a tutorial video to learn the basics. Today, when I tried to access my project, this error appeared in the Package Explorer:
Could not create the view: Plug-in "com.adobe.flexbuilder.as.editor" was unable to instantiate class "com.adobe.flexbuilder.as.editor.ui.packageexplorer.FlexPackageExplorer".
I also can't seem to create a new Flex project. If I try to, I can never click Finish. The button just remains faded out.
Below are the details on the package explorer error.
Any help would be much appreciated.
Thanks.
java.lang.NoClassDefFoundError: com/adobe/flexbuilder/codemodel/common/CMFactory
 at com.adobe.flexbuilder.as.editor.ui.packageexplorer.FlexPackageExplorer.<init>(FlexPackage Explorer.java:263)
 at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
 at sun.reflect.NativeConstructorAccessorImpl.newInstance(Unknown Source)
 at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown Source)
 at java.lang.reflect.Constructor.newInstance(Unknown Source)
 at java.lang.Class.newInstance0(Unknown Source)
 at java.lang.Class.newInstance(Unknown Source)
 at org.eclipse.core.internal.registry.osgi.RegistryStrategyOSGI.createExecutableExtension(Re gistryStrategyOSGI.java:170)
 at org.eclipse.core.internal.registry.ExtensionRegistry.createExecutableExtension(ExtensionR egistry.java:874)
 at org.eclipse.core.internal.registry.ConfigurationElement.createExecutableExtension(Configu rationElement.java:243)
 at org.eclipse.core.internal.registry.ConfigurationElementHandle.createExecutableExtension(C onfigurationElementHandle.java:51)
 at org.eclipse.ui.internal.WorkbenchPlugin$1.run(WorkbenchPlugin.java:267)
 at org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:70)
 at org.eclipse.ui.internal.WorkbenchPlugin.createExtension(WorkbenchPlugin.java:263)
 at org.eclipse.ui.internal.registry.ViewDescriptor.createView(ViewDescriptor.java:63)
 at org.eclipse.ui.internal.ViewReference.createPartHelper(ViewReference.java:324)
 at org.eclipse.ui.internal.ViewReference.createPart(ViewReference.java:226)
 at org.eclipse.ui.internal.WorkbenchPartReference.getPart(WorkbenchPartReference.java:595)
 at org.eclipse.ui.internal.WorkbenchPage$ActivationList.setActive(WorkbenchPage.java:4212)
 at org.eclipse.ui.internal.WorkbenchPage$18.runWithException(WorkbenchPage.java:3271)
 at org.eclipse.ui.internal.StartupThreading$StartupRunnable.run(StartupThreading.java:31)
 at org.eclipse.swt.widgets.RunnableLock.run(RunnableLock.java:35)
 at org.eclipse.swt.widgets.Synchronizer.runAsyncMessages(Synchronizer.java:134)
 at org.eclipse.swt.widgets.Display.runAsyncMessages(Display.java:3855)
 at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3476)
 at org.eclipse.ui.application.WorkbenchAdvisor.openWindows(WorkbenchAdvisor.java:803)
 at org.eclipse.ui.internal.Workbench$28.runWithException(Workbench.java:1384)
 at org.eclipse.ui.internal.StartupThreading$StartupRunnable.run(StartupThreading.java:31)
 at org.eclipse.swt.widgets.RunnableLock.run(RunnableLock.java:35)
 at org.eclipse.swt.widgets.Synchronizer.runAsyncMessages(Synchronizer.java:134)
 at org.eclipse.swt.widgets.Display.runAsyncMessages(Display.java:3855)
 at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3476)
 at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2316)
 at org.eclipse.ui.internal.Workbench.access$4(Workbench.java:2221)
 at org.eclipse.ui.internal.Workbench$5.run(Workbench.java:500)
 at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:332)
 at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:493)
 at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149)
 at com.adobe.flexbuilder.standalone.FlexBuilderApplication.start(FlexBuilderApplication.java :109)
 at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:194)
 at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLau ncher.java:110)
 at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.jav a:79)
 at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:368)
 at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179)
 at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
 at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
 at java.lang.reflect.Method.invoke(Unknown Source)
 at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:559)
 at org.eclipse.equinox.launcher.Main.basicRun(Main.java:514)
 at org.eclipse.equinox.launcher.Main.run(Main.java:1311)
Caused by: org.eclipse.core.runtime.internal.adaptor.EclipseLazyStarter$TerminatingClassNotFoundExce ption: An error occurred while automatically activating bundle com.adobe.flexbuilder.codemodel (16).
 at org.eclipse.core.runtime.internal.adaptor.EclipseLazyStarter.postFindLocalClass(EclipseLa zyStarter.java:125)
 at org.eclipse.osgi.baseadaptor.loader.ClasspathManager.findLocalClass(ClasspathManager.java :449)
 at org.eclipse.osgi.internal.baseadaptor.DefaultClassLoader.findLocalClass(DefaultClassLoade r.java:211)
 at org.eclipse.osgi.internal.loader.BundleLoader.findLocalClass(BundleLoader.java:381)
 at org.eclipse.osgi.internal.loader.SingleSourcePackage.loadClass(SingleSourcePackage.java:3 3)
 at org.eclipse.osgi.internal.loader.MultiSourcePackage.loadClass(MultiSourcePackage.java:31)
 at org.eclipse.osgi.internal.loader.BundleLoader.findClassInternal(BundleLoader.java:454)
 at org.eclipse.osgi.internal.loader.BundleLoader.findClass(BundleLoader.java:410)
 at org.eclipse.osgi.internal.loader.BundleLoader.findClass(BundleLoader.java:398)
 at org.eclipse.osgi.internal.baseadaptor.DefaultClassLoader.loadClass(DefaultClassLoader.jav a:105)
 at java.lang.ClassLoader.loadClass(Unknown Source)
 at java.lang.ClassLoader.loadClassInternal(Unknown Source)
 ... 51 more
Caused by: org.osgi.framework.BundleException: Exception in com.adobe.flexbuilder.codemodel.internal.bridge.CMBridge.start() of bundle com.adobe.flexbuilder.codemodel.
 at org.eclipse.osgi.framework.internal.core.BundleContextImpl.startActivator(BundleContextIm pl.java:806)
 at org.eclipse.osgi.framework.internal.core.BundleContextImpl.start(BundleContextImpl.java:7 55)
 at org.eclipse.osgi.framework.internal.core.BundleHost.startWorker(BundleHost.java:352)
 at org.eclipse.osgi.framework.internal.core.AbstractBundle.start(AbstractBundle.java:280)
 at org.eclipse.osgi.framework.util.SecureAction.start(SecureAction.java:408)
 at org.eclipse.core.runtime.internal.adaptor.EclipseLazyStarter.postFindLocalClass(EclipseLa zyStarter.java:111)
 ... 62 more
Caused by: java.nio.channels.OverlappingFileLockException
 at sun.nio.ch.FileChannelImpl$SharedFileLockTable.checkList(Unknown Source)
 at sun.nio.ch.FileChannelImpl$SharedFileLockTable.add(Unknown Source)
 at sun.nio.ch.FileChannelImpl.tryLock(Unknown Source)
 at java.nio.channels.FileChannel.tryLock(Unknown Source)
 at org.apache.lucene.store.NativeFSLock.obtain(NativeFSLockFactory.java:246)
 at org.apache.lucene.store.NativeFSLockFactory.acquireTestLock(NativeFSLockFactory.java:79)
 at org.apache.lucene.store.NativeFSLockFactory.setLockDir(NativeFSLockFactory.java:139)
 at org.apache.lucene.store.NativeFSLockFactory.<init>(NativeFSLockFactory.java:117)
 at com.adobe.flexbuilder.codemodel.internal.common.AbstractTextDatabase.start(AbstractTextDa tabase.java:111)
 at com.adobe.flexbuilder.codemodel.internal.search.ASSearchDataProvider.<init>(ASSearchDataP rovider.java:43)
 at com.adobe.flexbuilder.codemodel.internal.search.ASProviderFactory.createDataProvider(ASPr oviderFactory.java:47)
 at com.adobe.flexbuilder.codemodel.internal.search.SearchIndexManager.addISearchDataProvider dFactory(SearchIndexManager.java:70)
 at com.adobe.flexbuilder.codemodel.internal.CMCoreActivator.activate(CMCoreActivator.java:19 9)
 at com.adobe.flexbuilder.codemodel.internal.bridge.CMBridge.start(CMBridge.java:77)
 at org.eclipse.osgi.framework.internal.core.BundleContextImpl$1.run(BundleContextImpl.java:7 83)
 at java.security.AccessController.doPrivileged(Native Method)
 at org.eclipse.osgi.framework.internal.core.BundleContextImpl.startActivator(BundleContextIm pl.java:774)
 ... 67 more

I'm having this issue since ever with FB 4.7 (the normal IDE version, not the command-line one).
The most consistent way I found to resolve it is to delete the output folders of all flex projects, then restart and perform a clean build.
My suspect is that the incremental compilation is flawed, but cannot be sure of it.
P.S. usually the initial error has this root exception
Root exception:
java.lang.NullPointerException
at com.adobe.flexbuilder.codemodel.internal.bridge.WorkspaceSpecification.getStateLocation(W orkspaceSpecification.java:157)
at com.adobe.flexbuilder.codemodel.internal.bridge.WorkspaceSpecification.getFileInStateLoca tion(WorkspaceSpecification.java:149)
at com.adobe.flexbuilder.codemodel.internal.search.AbstractTextDatabase.start(AbstractTextDa tabase.java:81)
at com.adobe.flexbuilder.codemodel.internal.search.ASSearchDataProvider.<init>(ASSearchDataP rovider.java:25)
at com.adobe.flexbuilder.codemodel.internal.search.SearchIndexManager.initialize(SearchIndex Manager.java:155)
at com.adobe.flexbuilder.codemodel.CMCoreActivator.activate(CMCoreActivator.java:189)
at com.adobe.flexbuilder.codemodel.CMCoreActivator.start(CMCoreActivator.java:76)

Unit CS is not created in EN error

Similar Messages

Maybe you are looking for