Unit of measure in availability overview
Hi
The question is about the possibility to change the unit of measure displayed in the availability overview during a sales order creation as you can do in transaction MD04.
The problem is that if you set a quantity in the sales order in a alternative unit of measure (for instance Boxes) and if you check the availability, the systems shows the quantities in the base unit of measure (e.g. Pieces), so it is quite complicated to make the conversion, because you do not have the information on the screen.
Has anybody solved that issue?
thanks a lot!
Hi,
Check in material master.U can go to aditional data and give as box and save the material then it will ask u how many units for a box.Then check this hope it solves ur problem.
RV
Similar Messages
-
Internal Unit of measurement in J1ILIC01
Hi,
While creating Deemed Export Licence thru T.Code J1ILIC01, I came across one issue that when I enter the Material Number it only pics the description of material. However, the UoM is not picked automatically.
When I tried to put it manually, it will not accept.
It only accept the Internal Unit of measurement instead of Commercial Unit of measurement.
Thanks.Thanks Marcin,
Just to clarify from my side,even though the error occured only for one UOM,no unit of measurement are available.
Does your solution still apply?
Thanks for your help.
Best Regards.
jayawant -
Hiiiiiiiiiiiiiiii Experts,
I have a problem.When I am attaching material to an activity , it is taking base unit of measure which has been defined in material master as default.In case of stock item as item category it allows me to change the unit.But in case of Non Stock item it's not allowing me to change the unit.
For example I have a material A1 whose base unit of measure is defined in meter.But purchasing unit is TON.when i am adding it to activity as non stock item, it's unit appears as meter and its not allowing me to change it .It gives the error as _Item category N: Only base unit of measure METER allowed_.
For same material if i buy as stock item it allows me to change.
I have to buy it as non stock item, so plz tell me how can I change its unit of measure in component overview screen.
Regards
BrijeshHi Brijesh,
if you mentioning material as nonstock item that means PR against Network ....
and consumtion is agianst base unit only..... so at the time of PR system will not allow you to use alternate unit....( since it is against Network.)
Venkatesh -
Hello
At the time of creating a shopping cart,the moment,UOM is selected ,I get the following error.
"Internal Measurement Unit ZTO doesn´t exits in Spanish language"
However,,just to clarify,this unit of measurement is maintained in backend as well as SRM.
Could you help please?
Best Regards.
Jayawant GokhaleThanks Marcin,
Just to clarify from my side,even though the error occured only for one UOM,no unit of measurement are available.
Does your solution still apply?
Thanks for your help.
Best Regards.
jayawant -
Stock inconsistencies due to wrong Unit of measure
Hi,
I am currently facing an issue, generated due to master data inconsistencies. The problem is as follows:
I have a material with Unit of measure " pack". A PO was supposed to be created for "100 packs" of this material, but somehow Unit of measure in PO was "each", and thus it was created for "100 each". The supplier has sent quantity as 100 packs. GR was done on the basis of PO thus 100 each was entered. Invoice has been created and settled. Stock overview is showing this material as "100 each" whereas actually the material quantity physically available is 300 (100x3, each pack has 3 pcs).
I need to correct this situation. so that stock and accounts show the correct data.
Is there any simple way of correcting this issue. like scrapping etc... and how??
Thank you.Dear Priya,
You have completed the complete purchase cycle.
One way is to reverse the complete cycle, change the UOM and redo the cycle.
Ohter way is, if you need to increase the stock you can do that by delivery free of cost (mvt. type 511) or creating a PO with free tick followed by GR.
In this case you need to check the MAP of the material. If you need to change the MAP also then use transaction MR21.
Before doing please check the accounting impact of all these (the price difference account or the revaluation account will get hit).
In second option you can not change the UOM.(Maintain conversion factor between EA and PACK as 1:1)
Cheers,
Satish Purandare -
Adding extra unit of measure to LS26 screen
How do I add an extra unit of measure to the stock overview screen - LS26
Currently when I click on this button, only KGM is aviable to choose, I wish to add TNE
Please advise if possible
Many thanks
TonyIgnore, I have found out how to do this, by adding TNE, as the WM unit of measure on WM1 sheet of Material Masterdata
Field MLGN-LVSME
This unit of measure is then available for you to view using LS26, for this material -
AffineTransform - Is there a way to glean units of measurement for pixels?
Assuming I get a pointer to a java.awt.geom.AffineTransform from:
java.awt.geom.AffineTransform CurTransform = ((java.awt.Graphics2D)this.getMainFrame().getGraphics()).getDeviceConfiguration().getDefaultTransform();
Assuming I've gotten the right AffineTransform... How do I get, or can I get, the scaling factor between horizontal pixels and vertical pixels for the current screen (or whatever device). In other words I want to place components... buttons, textboxes, etc. in a dialog box so that they are "square". i.e. 10 units in x look on the screen equal to 10 units in y.
Once I know what the "square pixel scale factor" is I can then worry about making the units relative to whatever font size.
This question is usually posed as "How do I get dialog units?". I haven't done that because of the "legacy problems" associated with what most people think dialog units come from. It is true that way back when dialog units were derived from a textmetrics ONLY, but unless I'm mistaken, Charles Petzold, was describing something that could only be gotten that way at that time (circa 1990).... The width of the fixed system font by the height of the fixed system font ended up being as close to a unit that was 8 units high looked like 8 units wide in the screen. The object of the exercise is to most importantly get units of measurement that translate to pixels and look "square" on the screen. Secondarily, but not unimportant, is to be a unit that has some relevance to the current font size. It's been a long time dialog units in windows maybe a 2:1 ratio. I made my own cDialogUnits so long ago I can't remember what the "standard windows" dialog unit is. In windows I can very easily get the screen dpi x and y, I think it's a devicecontext but Java's "devicecontext" only gives one dimension of the dpi?
Also this query is mute if I was "painting" on a device. The units are for pixels NOT points and are (mostly) for placing controls on the screen. I am aware of and have used the various addPreferredGap and setAutoCreateContainerGaps available in a GroupLayout... Great gizmos but, still dialog units would be very handy for setting the prefered width of a textbox/label with too much text. (Note: dialog units are NOT for calculating the height of text... )
I did search the sun forums for an answer first... It might be here I just didn't find it. It seems to be a question either avoided like the plague or considered a dumb question in Java.This might be OK?
BE AWARE!! This is NOT a painting gizmo. It is used in conjunction with the Layout gizmos. It drives me crazy that the Layout gizmos have "default" gaps and spacers of some kind and yet ALL the tutorials immediately and unabashedly trash any "device independence" by mixing in pixel measurements... Not to mention I don't like the size of the gaps and spacing provided with the Layout gizmos anyway.
Does anyone know if this will fail? I am aware of the caveats provided... "Information about the device is only as good as has been provided." However if there is bad information in the device info I doubt using these units will do anything much different that the end user experiences with the errant device anyway.
AGAIN... This is NOT a painting gizmo. It's a helper when Laying out controls usually in conjunction with a Layout and only for spaces and gaps.
public class DialogUnits
private double m_x;
private double m_y;
public DialogUnits( java.awt.Graphics2D g2 )
java.awt.GraphicsConfiguration gc = g2.getDeviceConfiguration();
java.awt.geom.AffineTransform at = gc.getDefaultTransform();
at.concatenate( gc.getNormalizingTransform() );
double fs = g2.getFont().getSize2D();
m_x = at.getScaleX() * fs;
m_y = at.getScaleY() * fs;
public int CalcX( double units )
return (int)Math.round( ( units * m_x ) / 8.0 );
public int CalcY( double units )
return (int)Math.round( ( units * m_y ) / 8.0 );
public int ContainerGapX()
return this.CalcX( 8.0 );
public int ContainerGapY()
return this.CalcY( 8.0 );
public int FontSize2dX( int crude_columns )
return (int)Math.round( crude_columns * m_x );
public int FontSize2dY( int crude_rows )
return (int)Math.round( crude_line_height * m_y );
public int X( int units )
return this.CalcX( units );
public int Y( int units )
return this.CalcY( units );
} // end of class DialogUnits -
Error while creating PO -- Unit of measure not defined for lanuage ZH
Hi all,
i have created the PR with EA as UOM. Then while creating PO, i am getting error like
' Unit of measure not defined for lanuage ZH' .
Then I execute CUNI
Then menu is GOTO > Translation > units of measure
enter source language and target language . After this i am getting the below message
---> Language not available on server
Please suggest what i should do. Thanks.
Thanks
pabiHI Pabi,
Go to material master for material in purchase requisition, the Go to Additional data and maintained language as ZH in material master data.
Also the other possibility, that if in your case purchase requisition are converted to purchase orders through background jobs,
then check the background job execution in SM37 whether that background job has been triggered twice parellely in the background, which could have resulted in locking of same purchase requisition at same time and hence your are getting the Error.
Br,
Tushar -
Material Master MATMAS IDOC and base unit of measurement
Hi
We are using SAP standard material master IDOC type MATMAS05 to trigger IDOC. Our material master is having base unit of measure as "G". We are not using ISO unit of measurement. But Material master IDOC, segment E1MARM is populating base unit of meaurement (MEINS) as "GRM".
Any idea why IDOC is picking ISO unit of measurement instead of material master base unit of measurement.
Any idea how to send base unit of measurememt as "G" instead of "GRM" in DOC segment.
Thanks
NileshThere are ISO codes for country keys, currency keys, units of measure and shipping instructions. According to SAP design guidelines, you should use ISO codes for an IDoc if they are available. When you set up the IDoc, the SAP codes have to be replaced by ISO codes.
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEPRO/BCMIDALEPRO.pdf -
Hi
I want to procure same material from same vendor for different plants with different unit of measure.I tried maintaining different unit of measure in inforecord but it is not posible...
How to maintian differnet unit of measure with plant level for same material..
kindly need your inputs
-Prabuhi,
soory for delay,
to create condition table and assigning to access sequence go to
spro-mm-purchasing-condition-create contion table(in this create table in 900 ser.and enter. then double click on field u wnt eg. pur.org plant etc and then generate the table)-then go to acc. seq. in that go to change and assign that con. table before the info record table i.e. if info record acc, no. is 20 give earlier no. which is available and save it .
then go to MEK1 t. code u will get the pop up in which u will get u r combination ok. -
Unit of measure error in BAPI_MATERIAL_SAVEDATA
Hi Guru's,
i am trying to upload the material master data using BAPI...while uploading ia m getting beloow error ..please guide me anyone you..where i am doing mistake.....
1st this error i am getting while executing:
internal unit HR ,language EN is not maintained.
and afetr execution in gs_return i am getting below error:
Unit of measure ****** is not defined; check your entry
error number :490
dont get tence for code and all the values ae moving properly into BAPI...and
here i am consider the unit of mesure as HR (hour)..
here i am caliculating like ex: for employe (material) generating bill in hour basis.that is per 1hour $100.
please let me know if my question is not clear..
thanks in advance and will full points to reply....
*& Report ZERP_MATERIAL_CREATE_UPLOAD
REPORT zerp_material_create_upload.
DATA:gs_bapimathead TYPE bapimathead,
gs_clientdata TYPE bapi_mara,
gs_clientdatax TYPE bapi_marax,
gs_plantdata TYPE bapi_marc,
gs_plantdatax TYPE bapi_marcx,
gs_forecastparameters TYPE bapi_mpop,
gs_forecastparametersx TYPE bapi_mpopx,
gs_valuationdata TYPE bapi_mbew,
gs_valuationdatax TYPE bapi_mbewx,
gs_salesdata TYPE bapi_mvke,
gs_salesdatax TYPE bapi_mvkex,
gs_storagelocationdata TYPE bapi_mard,
gs_storagelocationdatax TYPE bapi_mardx,
gt_materialdescription TYPE STANDARD TABLE OF bapi_makt,
gwa_materialdescription TYPE bapi_makt,
gt_taxclassifications TYPE STANDARD TABLE OF bapi_mlan,
gwa_taxclassifications TYPE bapi_mlan,
gt_prtdata TYPE STANDARD TABLE OF bapi_mfhm,
gwa_prtdata TYPE bapi_mfhm,
gt_prtdatax TYPE STANDARD TABLE OF bapi_mfhmx,
gwa_prtdatax TYPE bapi_mfhmx,
gt_unitsofmeasure TYPE STANDARD TABLE OF bapi_marm,
gwa_unitsofmeasure TYPE bapi_marm,
gt_unitsofmeasurex TYPE STANDARD TABLE OF bapi_marmx,
gwa_unitsofmeasurex TYPE bapi_marmx,
gs_return TYPE bapiret2.
TYPES:BEGIN OF gty_itab1,
matnr(18), "material
mbrsh(1), "industry sector
mtart(4), "material type
vkorg(4), "sales org
vtweg(2), "distr chan
kondm(2), "mat prcing grp
ktgrm(2), "acc asgn grp
dwerk(4), "plant
meins(3), "base uom
tragr(4), "tarns grp
matkl(9), "mat grp
spart(2), "division
ntgew(13), "net weight
gewei(3), "weight unit
werks(4), "plant
ladgr(4), "loading grp
dismm(2), "mrp type
mtvfp(2), "available check
disgr(4), "mrp grp
dispo(3), "mrp controller
beskz(1), "procurement type
prmod(1), "forecasting mode
bklas(4), "valution class
stprs(11), "std price
vprsv(1), "price control
peinh(5), "price unit
lgort(4), "storage location
maktx(40), "mat description
taxkm(1), "tax class
planv(3), "task list usage
brgew(13), "gross weight
mtpos(4), "gen it gross grp
END OF gty_itab1.
DATA:gt_itab1 TYPE STANDARD TABLE OF gty_itab1,
gwa_itab1 TYPE gty_itab1.
TYPES:BEGIN OF gty_itab2,
abc(178),
END OF gty_itab2.
DATA:gt_itab2 TYPE STANDARD TABLE OF gty_itab2,
gwa_itab2 TYPE gty_itab2.
PARAMETERS:p_files TYPE string.
*START-OF-SELECTION.
START-OF-SELECTION.
*using call method uploading CSV file into internal table
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = p_files
filetype = 'ASC'
TABLES
data_tab = gt_itab2
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT gt_itab2 INTO gwa_itab2.
gwa_itab1 = gwa_itab2-abc(178).
APPEND gwa_itab1 TO gt_itab1.
ENDLOOP.
LOOP AT gt_itab1 INTO gwa_itab1.
SPLIT gwa_itab1 AT ',' INTO
gwa_itab1-matnr
gwa_itab1-mbrsh
gwa_itab1-mtart
gwa_itab1-vkorg
gwa_itab1-vtweg
gwa_itab1-kondm
gwa_itab1-ktgrm
gwa_itab1-dwerk
gwa_itab1-meins
gwa_itab1-tragr
gwa_itab1-matkl
gwa_itab1-spart
gwa_itab1-ntgew
gwa_itab1-gewei
gwa_itab1-werks
gwa_itab1-ladgr
gwa_itab1-dismm
gwa_itab1-mtvfp
gwa_itab1-disgr
gwa_itab1-dispo
gwa_itab1-beskz
gwa_itab1-prmod
gwa_itab1-bklas
gwa_itab1-stprs
gwa_itab1-vprsv
gwa_itab1-peinh
gwa_itab1-lgort
gwa_itab1-maktx
gwa_itab1-taxkm
gwa_itab1-planv
gwa_itab1-brgew
gwa_itab1-mtpos.
*header data
gs_bapimathead-material = gwa_itab1-matnr.
gs_bapimathead-ind_sector = gwa_itab1-mbrsh.
gs_bapimathead-matl_type = gwa_itab1-mtart.
gs_bapimathead-basic_view = 'X'.
gs_bapimathead-sales_view = 'X'.
gs_bapimathead-purchase_view = 'X'.
gs_bapimathead-mrp_view = 'X'.
gs_bapimathead-storage_view = 'X'.
gs_bapimathead-account_view = 'X'.
gs_bapimathead-cost_view = 'X'.
*sales data
gs_salesdata-sales_org = gwa_itab1-vkorg.
gs_salesdatax-sales_org = '8888'. "'X'.
gs_salesdata-distr_chan = gwa_itab1-vtweg.
gs_salesdatax-distr_chan = '88'. "'X'.
gs_salesdata-mat_pr_grp = gwa_itab1-kondm.
gs_salesdatax-mat_pr_grp = 'X'.
gs_salesdata-acct_assgt = gwa_itab1-ktgrm.
gs_salesdatax-acct_assgt = 'X'.
gs_salesdata-delyg_plnt = gwa_itab1-dwerk.
gs_salesdatax-delyg_plnt = 'X'.
*client data
gs_clientdata-base_uom = 'HR '. "gwa_itab1-meins.
gs_clientdatax-base_uom = 'X'.
gs_clientdata-trans_grp = gwa_itab1-tragr.
gs_clientdatax-trans_grp = 'X'.
gs_clientdata-matl_group = gwa_itab1-matkl.
gs_clientdatax-matl_group = 'X'.
gs_clientdata-division = gwa_itab1-spart.
gs_clientdatax-division = 'X'.
gs_clientdata-net_weight = gwa_itab1-ntgew.
gs_clientdatax-net_weight = 'X'.
gs_clientdata-unit_of_wt = gwa_itab1-gewei.
gs_clientdatax-unit_of_wt = 'X'.
gs_clientdata-item_cat = gwa_itab1-mtpos.
gs_clientdatax-item_cat = 'X'.
*Plant data
gs_plantdata-plant = '8888'. "gwa_itab1-werks.
gs_plantdatax-plant = '8888'. "'X'.
gs_plantdata-loadinggrp = gwa_itab1-ladgr.
gs_plantdatax-loadinggrp = 'X'.
gs_plantdata-mrp_type = gwa_itab1-dismm.
gs_plantdatax-mrp_type = 'X'.
gs_plantdata-availcheck = gwa_itab1-mtvfp.
gs_plantdatax-availcheck = 'X'.
gs_plantdata-mrp_group = gwa_itab1-disgr.
gs_plantdatax-mrp_group = 'X'.
gs_plantdata-mrp_ctrler = gwa_itab1-dispo.
gs_plantdatax-mrp_ctrler = 'X'.
gs_plantdata-proc_type = gwa_itab1-beskz.
gs_plantdatax-proc_type = 'X'.
gs_plantdata-period_ind = 'M'. "HARD CODED FOR PERKZ peroid indicator
gs_plantdatax-period_ind = 'X'.
gs_plantdata-inhseprodt = '0'. "hard coded for DZEIT inhouse production
gs_plantdatax-inhseprodt = 'X'.
*forecast parameeters
gs_forecastparameters-plant = '8888'. "gwa_itab1-prmod.
gs_forecastparametersx-plant = '8888'. "'X'.
gs_forecastparameters-fore_model = gwa_itab1-prmod.
gs_forecastparametersx-fore_model = 'X'.
*valution data
gs_valuationdata-val_area = '8888'. "gwa_itab1-bklas.
gs_valuationdatax-val_area = '8888'. "'X'.
gs_valuationdata-val_class = gwa_itab1-bklas.
gs_valuationdatax-val_class = 'X'.
gs_valuationdata-std_price = gwa_itab1-stprs.
gs_valuationdatax-std_price = 'X'.
gs_valuationdata-price_ctrl = gwa_itab1-vprsv.
gs_valuationdatax-price_ctrl = 'X'.
gs_valuationdata-price_unit = gwa_itab1-peinh.
gs_valuationdatax-price_unit = 'X'.
*storage location dat
gs_storagelocationdata-plant = '8888'. "gwa_itab1-lgort.
gs_storagelocationdatax-plant = '8888'. "'X'.
gs_storagelocationdata-stge_loc = gwa_itab1-lgort.
gs_storagelocationdatax-stge_loc = '8888'. "'X'.
*material discription
gwa_materialdescription-langu = 'E'.
gwa_materialdescription-matl_desc = gwa_itab1-maktx.
*tax classification
gwa_taxclassifications-taxclass_1 = gwa_itab1-taxkm.
gwa_taxclassifications-depcountry = 'US '. "HARD CODE FOR TAX
*prt data
gwa_prtdata-plant = '8888'. "gwa_itab1-planv.
gwa_prtdatax-plant = '8888'. "'X'.
gwa_prtdata-prt_usage = gwa_itab1-planv.
gwa_prtdatax-prt_usage = 'X'.
*unitsof measure
gwa_unitsofmeasure-alt_unit = 'HR '. "gwa_itab1-brgew.
gwa_unitsofmeasurex-alt_unit = 'HR '. "'X'.
gwa_unitsofmeasure-unit_of_wt = 'KG'. "gwa_itab1-brgew.
gwa_unitsofmeasurex-unit_of_wt = 'X'.
gwa_unitsofmeasurex-sub_uom = 'X'.
gwa_unitsofmeasure-gross_wt = gwa_itab1-brgew.
gwa_unitsofmeasurex-gross_wt = 'X'.
*appending workarea to table's
APPEND gwa_materialdescription TO gt_materialdescription.
APPEND gwa_taxclassifications TO gt_taxclassifications.
APPEND gwa_prtdata TO gt_prtdata.
APPEND gwa_prtdatax TO gt_prtdatax.
APPEND gwa_unitsofmeasure TO gt_unitsofmeasure.
APPEND gwa_unitsofmeasurex TO gt_unitsofmeasurex.
*calling FM BAPI for uploading the Material master data
CALL FUNCTION 'BAPI_MATERIAL_SAVEDATA'
EXPORTING
headdata = gs_bapimathead
clientdata = gs_clientdata
clientdatax = gs_clientdatax
plantdata = gs_plantdata
plantdatax = gs_plantdatax
forecastparameters = gs_forecastparameters
forecastparametersx = gs_forecastparametersx
valuationdata = gs_valuationdata
valuationdatax = gs_valuationdatax
salesdata = gs_salesdata
salesdatax = gs_salesdatax
IMPORTING
return = gs_return
TABLES
materialdescription = gt_materialdescription
unitsofmeasure = gt_unitsofmeasure
unitsofmeasurex = gt_unitsofmeasurex
taxclassifications = gt_taxclassifications
prtdata = gt_prtdata
prtdatax = gt_prtdatax.
Check the return table.
IF sy-subrc NE 0.
CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'.
WRITE: / 'Error occured while creating material'.
ELSE.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
WRITE: / 'material',gwa_itab1-matnr,'created'.
ENDIF.
ENDLOOP.Hi Aparna..
even with HUR also i am getting same error.....
is there any changes required in the SPRO .......
i mean in BAPI had ..unitofmeasure we have around 21 fields( here extra fields is DEL FLAG)
but in unitofmeasurex has only 20 fields...
we need to anything in SPRO for avoiding DEL FLAG.....
sorry if i am confusing u.....
thanks for responce and send few more inputs for resolving the issuee.... -
Unit of measure with language Key
Hello Guruz,
WHile creationd of purchase order, there is a check kept which compares the vendor communication language which gets updated in the Po header - Communucation tab with Db table T006A which holds the Unit of measurements with Language Key and pops up an error message.
It cheks the order unit in the PO, and the T006A whether the unit is maintained in the Language key as in the PO header - Communiction tab.
But while creating a unit of measurement in CUNI, we dont have the option to maintain the language key for the UOM.
In CUNI, it defaults the language key as EN in table T006A.
I need a prompt support from you guys on this issue. Please suggest how to go about with this?
Best Regards
Greg.Hello,
When i am trying to go for the language key in CUNI, it says that the said language is 'not available in server'. I guess it is checking whether the language patch is updated in the server.
But it doesn't sound logical to maintain all the unit of measurements in all the vendor languages. Suppose if we are having vendors with 75 communication languages and we are having 50 units os measurements, so does that mean that we have to maintain units of measurements 75 X 50 times ?
Kindly provide your inputs on the issue. We are facing lots of issues with this control kept in PO header checking for the T006A with the vendor communication language.
Regards
Greg -
Unit of measure PCS not defined for language FR
Dear Gurus,
I try to raise a PO in ME21N, when saving the order, I am being prompted by the system with the following message:
"Unit of measure PCS not defined for language FR"
I then went to MM02 to check the material master data "Sales Text" Tab.
There the only language available is English, so I clicked on the "Language Maintained" Tab and created a new language for French.
The problem is that when I want to save the changes, the system prompts me with the following message:
"Blank texts exist in the following languages: French and English, these texts will be deleted"
Then the Material Master Data closes and no changes have been made.
Can you please guide me through step by step of what I have to do to be able to populate the field "PCS" for pieces in French so that it is taken into account in the Material Master Data and by extension in a PO.
Thanks for your help.
KInd regards
ChrisHi Chris,
Goto T code CUNI. In the first screen click on GOTO-Translation-dimension.
Enter EN in Source language and FR in Target.Maintain the entry there. -
PM Order Operations Default Unit of Measurement
Halo Experts,
We have a problem in UOM for PM/CS order operations. We have defined HR as default value of UOM for operations in IMG.
Business wants to change at the order level to H as UOM and it is manually keyed in and saved. But when we check with the F4 option for Unit of Measure " H" doesnt appear where as HR appears.
Any restrictions in displaying all the unit of measures. Can anybody clarify why "H" is not appearing on F4 option in the work order operation line items.
Regards,
SelvaHi Rajesh,
We are getting the default unit in operation tab and all the config of default values is available but when we execute the F4 option the unit "H" is not appearing where as if we change from HR which is a default unit to H it is getting saved at the operation Tab.
Hope it is clear now.
Regards,
Selva -
MMBE-i want display (1 box = 10 pc) in unit of measure
Dear All,
In MMBE t-code if we execute it,stock overview we can c as a report output.Displays Base unit of measure as(PC,EA....) here i want display (1 box = 10 pc) Which we ll give it while creating a material in mm01-purchasing.
There is no exits for this t-code so is there any options that functional people can enable to view it in output or any developments to do here.
Or in any other T-code we can display it.
<removed_by_moderator>
Edited by: Julius Bussche on Jul 28, 2008 10:29 AMhi,
ask your mm consultant.....he needs to configure...
Maybe you are looking for
-
Finder still showing me the files I just deleted
when I enter the FINDER and delete any file in it, it disappears from the list but continues to be in the cover flow.
-
Failed to open the connection: Error Code 17
Here's an odd one. Environment: VB.NET Winform Visual Studio 2008 .NET framework 2.0 Crystal Reports 2008 ODBC connection I have three reports, living in the same directory. They are essentially identical, except for the grouping. All three run succe
-
Can I encode real-time sound to A-LAW or U-LAW? And make it louder?
Hi there, I'm making a voice chat application, that currently works using the Java Sound API (So no JMF), in the following PCM_SIGNED format: public static final AudioFormat FORMAT = new AudioFormat( AudioFormat.Encoding.PCM_SIGNED, 16000
-
How to show print dialog as soon as it opens in browser
I need to open a pdf with print dialog through AcroJS. The code that I used is: console.show(); var pp = this.getPrintParams(); pp.interactive = pp.constants.interactionLevel.full; this.print(pp); In order to add the script I used iText. I made a Pdf
-
I've followed the instructions to tell the iPod that I want to manage music and video manually, but I still can't add a playlist I've created in iTunes to the iPod...