Unit of measure is not maintained at level2 DSO

Hi Experts,
Unit of Measure is not maintained in level2 DSO.
Scenario:
We have a Product having values for different market in DSO UOM is Millions and Aggregated Value of that product is loaded in upper level DSO Unit of Measure is not maintained it shows blank.
Solution: We have done selective deletion and uploaded again from the DSO where UOM is maintained correctly, Issue is resolved.
We would like to know the cause of the issue.
Please any let me know how to isolate the issue and if you have time let me call you to investigate further.
Regards,
Prem

Hi Murali,
UOM is maintained in level1 DSO correctly and for certain aggregated values it is not maintained and this very strange if we do manual upload data UOM is correct in Level2 DSO.
I guess issue happening in regular data load or what so ever....
We are trying to correct the data just by deleting and uploading again as this is permanent solution.
If routines are the issue when we upload manually it shouldnt work but still working fine... this strange behaviour....
please suggest and advise me... if required let me call you.
Regards,
Prem

Similar Messages

Views and Base unit of Measure is not coming in Chines Lang

HI All
Plz Help me.
I log-In Chines Server, during MM01 the views are coming in English language instead of chines.
and during PO creation The Base unit of Measure is not Coming in Chines Language it is displaying Some number??
I have maintained Source and taget lag in CUnI..but still Im getting this problem..
How to solve this plz help..
Thanks and regards
Ramesh reddy

Hi
Please maintain the translation in the Following Configuration
Logistics - General->Material Master->Configuring the Material Master->Define Structure of Data Screens for Each Screen Sequence
Select the Specific Screen Sequence & Maintain the languages
Similarly please maintain the Translations in the Transaction CUNI for the Base UOM in respective languages
I hope currently in your system only Language EN is maintained
Thanks
Madhav

U2018Ea unit of measure has not been created in the language ES u2018in srm

Dear Friends,
I have checked in ECC & SRM in table T006A (UOM languages). UOM "EA" is defined in ES (Spanish).
Also in comm_hierarchy also i chked for product category language maintenance and found maintained in EN,ES languages.
u2018Ea unit of measure has not been created in the language ES u2018
I have tried with sapanish (international sort,dominic,traditional sort)& rest of spanish spoken country languages but i am getting the same error.( IE- tools-general-languages & refreshed the page). u2018Ea unit of measure has not been created in the language ES u2018
Regards,
William

Hi Willam,
When are you getting this error ? i.e. while creation of shopping cart or process purchase order..
I believe this issue is due to creation of UOM..which means EA UOM should be created with EA language.
For further details please have a look on
http://wiki.sdn.sap.com/wiki/display/SI/UnitofMeasurerelatedsettingsinSAP
where they have specified that "Maintain UOM in different languages by logging to the system with different logon language"
Kindly confirm.
Thanks
Rajesh K

Error message :PurchOrder : Unit of measure PC not defined for language ES,

Hello,
I am facing a problem with PO replication to R/3 backend.
POs are not replicated to R/3, POs are in status 'Transfer Failed (E.Sys.)' .
When I check with 'RZ20' transaction I got this message :
PurchOrder : Unit of measure PC not defined for language ES.
SRM 4.0 Extended classic scenario
Regards,
Shaiek

Hi
This seems to be a configuration issue,.
Pls maintain the unit of measure in configuration using transaction CUNI
Hope this will help.
Pls reward suitable points.
Regards
- Atul

Error as unit of measure PC not defined for language RO while creation ofPO

Hi GUYS,
When am trying to create a PO in ME21N transaction i got error as below,
unit of measure PC not defined for language RU
Message no. 06079
Table 006A contains no entry for this unit of measure
Please let me know what action to be taken from my side to over come this issue.
Note: If i check the related vendor i could able to view that the language maintained as RU.
Cheers,
Kumar.S

Hi Jurgen,
Thanks for your reply once again.
As mentioned by you earlier i have tried to login with languae RU in Q system but unfortunately i got an error saying taht language not installed.
Also we found for Language - EN and UOM - PC has been maintianed in T006A table.But if i check for lanugage - RU and UOM PC combinatoin has not manintaned in T006A table.
Please let me know how to maintain the values in this table T006A for combination Lang - RU and UOM - PC.
Please revert back with your soilution.
Note: I have tried in SM30 but failed due to below error
The maintenance dialog for T006A is incomplete or not defined
Cheers,
Kumar.S

Unit of measure PCS not defined for language FR

Dear Gurus,
I try to raise a PO in ME21N, when saving the order, I am being prompted by the system with the following message:
"Unit of measure PCS not defined for language FR"
I then went to MM02 to check the material master data "Sales Text" Tab.
There the only language available is English, so I clicked on the "Language Maintained" Tab and created a new language for French.
The problem is that when I want to save the changes, the system prompts me with the following message:
"Blank texts exist in the following languages: French and English, these texts will be deleted"
Then the Material Master Data closes and no changes have been made.
Can you please guide me through step by step of what I have to do to be able to populate the field "PCS" for pieces in French so that it is taken into account in the Material Master Data and by extension in a PO.
Thanks for your help.
KInd regards
Chris

Hi Chris,
Goto T code CUNI. In the first screen click on GOTO-Translation-dimension.
Enter EN in Source language and FR in Target.Maintain the entry there.

Unit of measure EA not defined for language PT

Hello,
Vendor Communication is maintained in "Portuguese language-PT", while creation of Scheduling agreement system will given the below error, bcz Scheduling agreement will taken the Langause from vendr master
"Unit of measure EA not defined for language PT"
Table 006A contains no entry for this unit of measure.
We have cross checked Material master and maintained the "langauge-PT" in material master additional data.
Checked T006A table for "EA" found for language "EN, DE, CN etc. not for "PT" how to maintain T006A table for Portuguase langauge.
Regards
Mahesh Naik

>
Mahesh Naik wrote:
> Hello,
>
> Suppose we have changed the source langauge "EN" to Target Langauge"PT" is it change all the Unit from EN to PT. after that how the system will pick english language's
No, it just gives you all the units maintained in that source language as a proposal to enter the description in target language PT, there will not be any change to the source language EN while maintaining a translation.

Base unit of measure can not be changed since EAN is already assigned.

Hi,
We would like to change the UOM from EA to SET .In order to tag MM # as BOM Header and ZCEN (Serial number profile)but the error massage appears as below print screensystem is not allowing to do so ,throwing following error message:
"Base unit of measure can not be changed since EAN is already assigned."
Could you help to resolve the same.
Thanks,
Amit

Hi,
Thats correct you must be getting Error message M3 341 ,
EAN international article number is tied with material number in basic data view with EAN Category and seperate number range
EAN is a standardized unit that uniquely identifies a material relating to a unit of measure or type of packaging.
The International Article Number (EAN) is assigned by the manufacturer of the material. In this case, the EAN identifies the
manufacturer uniquely. A company can assign EANs using "in-store" numbering techniques known only to the company.
If you still want to change UOM you need to first remove the EAN assigned..please explore further if you have internal number range
for EAN or external ..etc
Thanks
Diwakar

Error in BAPI_MATERIAL_SAVEDATA - Unit of measure ****** is not defined;

Hi,
I am using the BAPI_MATERIAL_SAVEDATA to create material in the material master, I am passing
    ls_bapi_head-basic_view    = 'X'.
    ls_bapi_head-purchase_view = 'X'.
    ls_bapi_head-mrp_view      = 'X'.
    ls_bapi_head-storage_view = 'X'.
    ls_bapi_head-quality_view = 'X'.
    ls_bapi_head-account_view = 'X'.
these views, I am passing the necessary details to the BAPI . But it is giving me an error ' **Unit of measure ****** is not defined; check your entry**'. plz help me how to solv the problem.
Thanks,
shekar

Hi Vinod,
It was very usefull for me thanks,
I have another problem i have to pass Valuation Class - bklas and in quality view nspection Type - 'art', Inspection Type - Material Combination is Active - 'aktiv'.
please let me know how to pass these values to FM
thanks,
shekar

Unit of measure JHR not defined

Hi Friends,
What can cause this problem. I am getting this error message
"Unit of measure JHR not defined" after I am creating a Shopping card in EBP.
JHR is existing on both sides Backend and EBP in the table T006.
Regards
Marco M.

COM_PRODUCT_UNIT
you need to debug this program . JHR is not SAP or international UOM . it could be customised one
COM_PRODUCT_UNIT_READ_API
Is a unit of the product convertable into i_unit?
    CALL FUNCTION 'DIMENSIONCHECK_DIMENSIONLESS'
      EXPORTING
        meinh                       = iv_unit
      EXCEPTIONS
        dimension_not_dimensionless = 1
        t006d_entry_missing         = 2
        t006_entry_missing          = 3
        OTHERS                      = 4.
    CASE sy-subrc.
      WHEN 0.
        MESSAGE e020(com_product_unit) "unit is dimensionless
               WITH iv_unit
               RAISING unit_not_allowed.
      l_lines = l_lines + 1.
        CALL FUNCTION 'COM_PR_UNIT_CHECK_CONVERTABLE'
          EXPORTING
            i_base_unit     = ls_base_unit-unit
            i_alt_unit      = iv_unit
            i_tabix         = l_lines
            it_pr_unit      = lt_pr_unit
          IMPORTING
            e_add_const     = l_add_const
            e_numerator     = l_numerator
            e_denominator   = l_denominator
            e_unit          = l_unit
            e_sub_num       = l_sub_num
            e_sub_denom     = l_sub_denom
          EXCEPTIONS
            not_convertable = 1
            overflow        = 2
            OTHERS          = 3.
        CASE sy-subrc.
          WHEN 1.
            MESSAGE e020(com_product_unit)
                  WITH iv_unit
                  RAISING unit_not_allowed.
   CALL FUNCTION 'COM_PR_UNIT_CHECK_CONVERTABLE'
          EXPORTING
            i_base_unit     = ls_base_unit-unit
            i_alt_unit      = iv_unit
            i_tabix         = l_lines
            it_pr_unit      = lt_pr_unit
          IMPORTING
            e_add_const     = l_add_const
            e_numerator     = l_numerator
            e_denominator   = l_denominator
            e_unit          = l_unit
            e_sub_num       = l_sub_num
            e_sub_denom     = l_sub_denom
          EXCEPTIONS
            not_convertable = 1
            overflow        = 2
            OTHERS          = 3.
        CASE sy-subrc.
          WHEN 1.
            MESSAGE e020(com_product_unit)
                  WITH iv_unit
                  RAISING unit_not_allowed.
          WHEN 2.
            MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4
                    RAISING overflow.
E        COM_PRODUCT_UNIT       020     Unit of measure & is not defined for product
When do you get this error ? while ordering Internal goods and services or describe procurement?
or while procure from catalog.

" Unit of measure ****** is not defined; check your entry in table T006

I´m Trying to create a material from MDM to SAP and I´m monitoring the IDOC in WE05 and i get the next message:
" Unit of measure ****** is not defined; check your entry
Message no. M3490
Diagnosis
The key for the unit of measure you entered is not defined in table T006.
Procedure
Define the unit of measure through Customizing (Materials Management). "
In MDM we are sending as remote key the SAP Code and this code exists in the table T006, but in the information of failed IDOC say:
" Messages have been issued: number 0000000000184470
Message no. MK101
Diagnosis
During inbound processing for the IDoc, messages have arisen while checking material data. "
If someone has information about it ,pls I´ll appreciate your answer.
Regards Itzell T.

I´m Trying to create a material from MDM to SAP and I´m monitoring the IDOC in WE05 and i get the next message:
" Unit of measure ****** is not defined; check your entry
Message no. M3490
Diagnosis
The key for the unit of measure you entered is not defined in table T006.
Procedure
Define the unit of measure through Customizing (Materials Management). "
In MDM we are sending as remote key the SAP Code and this code exists in the table T006, but in the information of failed IDOC say:
" Messages have been issued: number 0000000000184470
Message no. MK101
Diagnosis
During inbound processing for the IDoc, messages have arisen while checking material data. "
If someone has information about it ,pls I´ll appreciate your answer.
Regards Itzell T.
Hi Itzell T,
      While creating the material the unit of measurement which is entered is not existing in the SAP System. The unit of measurement entered during creation of material is cross checked from enteries of check table T006.
      So, functional consultant should take care of this issue just let him know the message.
   He know what problem actually is and fix the problem as Ankur had said.

Unit of Measure TON not defined for language PT ?

Hi all,
I'm new to MM and to SAP in general and I have 2 questions for now :
1. I have a requisition which is set up using unit of measure TON. When I try to create the PO, an error message pops up saying " Unit of measure TON not defined for language PT ". Do you know what does language PT means and why does this error appears? When I try to convert the TON into TNE, the same message pops up : " Unit of measure TNE not defined for language PT ".
I also can not convert TON into EA...any ideas why?
2. How can I see the total value of a PO that has many lines ?
Thank you very much
Iuliana

Hi
Is this error "" Unidade de medida *** não definida em idioma PT ""
appearing only when you select Ton, or any other unit.
pl. clarify.
I have seen that you get this message when your loging Login language is Portuguese.
Any how Configuration of units needs to be checked in
Spro >General setting > check Units of measurements ,
( or pl. use Tcode -- Cuni )
I also can not convert TON into EA...any ideas why?
can you give me some more inputs, what erro are u getting ?
2. you can see the total Po. values in Po header details
under status tab view.
if my soln is found usefull
Pl. award me points
Thanks
Prasanna kumar .b.a

How to correct CIF error Base unit of measure does not exist?

Dear experts,
I'm trying to cif a location product with base unit of measure KG in R/3 and alternative unit of measure well maintained.
it gives me a CIF queue saying that
"Base unit of measure ZXX does not exist (Product 0000000000000XXXXXX has not been created)"
I do not understand why, the unit ZXX does not exist in the alternative unit of measure for any of the materials managed
I also checked CUNI table and ZXX is not there neither in R/3 or APO,
Thanks for your help
E

Looks like the Alternate UOM --Zxx is not maintained in APO.
2 ways to do this:
(1) program- RSIMPCUST
Re transfer all your UOM settings from R3 to APO
(2) Manual Maintenance in APO:
SPRO>SAP NETWEAVER>GENERAL SETTIGNS>Check UNits of Measurement
Thanks
Kumar

Unit of Measure BOX not defined in language DE

Hi Experts,
We have a Unit of measure BOX, it is used in a Purchase Requisition.
When converting this PR to PO the vendor entered has the language German(DE) and system throws out an error message mentioned in the subject.
I have checked in SPRO under UOM settings and found that this has been maintained for all the languages the path I have checked is SPRO --> SAP NetWeaver -->General Settings --> Check Units of Measurement --> ISO Units --> Select the UOM (BOX) and then in Menu options (Goto --> Translation).
Can anyone help me out what can be the other possible reasons.
Thanks a lot in advance.
Regards
Lucky.

Dear Lucky,
Normally this issue happens because a missing entry for unit in transaction CUNI.
To maintain this, enter the transaction: CUNI
   Click "Unit of Measurement" and maintain the following as below.
Unit           : XX
Commercial     : XX
Technical      : XX
Meas.unit text : Activ.unit
Please review SAP Note No.[15430|https://service.sap.com/sap/support/notes/15430]
Regards,
ian, Wong Loke Foong

Sale unit of measure is not copied into Delivery from MF60 staging

Hello all,
we are using MF60 for EWM staging. Component has base unit of measure as M2. For production purposes, issue unit of measure was set to KG.
I managed to get KG in MF60 during staging, but Outbound delivery created contains however unit M2. This is unit of issue from sales org1 tab. I changed this to KG, but still M2 is coming.
Please let me know if you know what is the problem.
Thanks in advnace!
Regards, Andrey.

Hi Andrew,
I think this issue is nothing to do with EWM. You can check with your SD consultant why sales UoM not getting copied into delivery. May be because of some delivery type or delivery item type settings.
I had same issue for over delivery tolerance, which I raised with SAP and they advised to use the customized BAdi to get it done.
Thanks,
sandip

Unit of measure is not maintained at level2 DSO

Similar Messages

Maybe you are looking for