Unit Of Measure problem

Dear All,
Can anybody tell me the solution of -
>
I have maintained Uom as PC for an Perishabe item but system is allowing .5PC for issue.(i.e. fraction of PC)
I want to restrict it as PC only.How can I do that?
Thanks in Advance
Shuvan

Hi,
Go to transaction CUNI and select dimension first and then go to unit of measurement and then select unit and thr in display make decimal places as ZERO.
So that system will not allow fractions , only whole nos.

Similar Messages

Alternative Unit of Measurement Problem

Dear Gurus,
My problem is once I activate altyernative UOM in material master, while issuing materials it is accepting any UOM along with the UOM which is mentioned .
For example my Base unit of measure is TO and my alternative UOM is FT3 . But while i am issuing material using HL or CD3 it is accepting and post the entry without any message.
Kindly help me out to restrict alternative UOM which i am defined in Material Master.
Thanks in advance
Best regards
Soumen

I am not getting what u are saying. We are using ECC 6.0.
In bottom left under conversion block
Numerator
Denominator
Exponent
Additive Constant
Decimal Pl rounding
Unit of meas family
And one more block Convert unit of measuremnt
Value entry                        1.00 TO
Conversion to target unit    1000.00000 KG
Conversion to SI unit          1000.00000 KG
Apart from this anything is ther kindly describe me the path how to find out.
Regards
Soumen

Material upload: alternate unit of measure problem

Hello,
I'm uploading materials using LSMW (BAPI nethod: BUS1001006). I have a problem for the records with alternate units of measure. I put the units in a separate file and map the ISO code and the Numerator. However, I receive an error M3333 for the materials with 2 rows (one basic UoM and other alternate), which says that I have to maintain conversion factors for the alternate UoM. I thought, I'm doing so by providing Numerator (E1BP_MARM-NUMERATOR), but somehow it's not enough.
Any assistance will be highly appreciated
Thanks in advance,
Eli

Wrong definition in MARMX structure.

Alternate unit of measure problem

Dear All,
here we have one material.
1. Base unit of measure is Each ( Ea)
2. alternate unit of measure is Meter ( M )
conversion is 2000 M = 1 Each
here if business is entering 2001 M than system is taking 2 Ea means 4000 Meter..
so please guide me how to solve this problem
Thanks
H shah

Hi,
Check any Rounding the UOM in MM purchasing view.
SAM

Unit of measurement problem

Hi,
A material has its base unit as "Number" & additional unit as "KG" while creating PR it takes only NO not KG and same follows in PO. How can that be solved?

Hello
It will take NO while creating the PR even if you change in Material master purchasing view. i.e. Ordering unit as KG and also in info record. while creating the PO, the unit will be changed to KG based on conversion factor. After Gr, the system will show the stock in NO as NO is base unit of measure. (stock keeping unit).
If you want to change the base unit of measure, then please refer the following poitns :
As per the SAP standard functionality , We want to change the base unit of measure (base unit). for material master, during the change, the system performs extensive checks in order to avoid inconsistencies in the applications which use the material master .
In particular, the following checks are performed:
The base unit must not be defined as an alternative unit of measure for the material
No International Article Number must be assigned to the base unit
No proportion/product units must be defined for the material
No configurable material must be assigned
The material must not be used as a configurable material-
Stock must neither exist for the previous period nor for the current period -
No physical inventory must be active -
No reservations or dependent requirements must exist for which the deletion indicator is not set
No planned orders must exist -
No purchase requisitions, purchase orders or scheduling agreements must exist for which the deletion indicator is not set-
No WM transfer requirements, no WM quants or no WM posting change notices must exist -
The material must not be a bill of material
The material must not be contained in a bill of material -
The material must not be used as a production resource/tool -
The material must not be used in task lists -
No standard cost estimate must exist for the current or future period
No production orders must exist
No planned independent requirements must exist
No run schedule headers must exist
If the base unit has dimensions, no serial number profile must be assigned
No sales and distribution documents must exist which have status Not processed or Partially processed
Other alternative solution in case of Urgency:
Creation of a new material master similar to the current material and using the new code for further usage.
Warm regards
Ramakrishna

Unit of measurement problem while converting SC to PO - Classic

Hi
We are using Classic scenario and on SRM 3.0 with SAP 4.70
The problem:
User created shopping cart with qty of 3.24 EA, when we convert this Shopping cart as PO in backend SAP system is removing decimal places in PO and making as 3 EA. Like wise if SC is for 0.45 EA the PO will generate error because qty is 0 EA.
I know decimal places are not configured in CUIN for EA in both SAP and EBP also. But system allows me decimal places to create SC and manullay created POs in EBP and SAP respectively. The problem is only when we conver SC to PO its Truncating.
Any ideas, please help.
Thanks in Advance
Nags

Hi Nagaraju,
Looks like the problem lies in the default settings of the user profile (background user that talks to your R/3 system) that you are using to transfer the data to your R/3 system.
Change your default settings of that system user and that should resolve your problem.
Please award points for usefull answers.
Thanks,
Sundeep

Unit of measure problem between Order UOM, Base UOM and Inspetion UOM

Material: ROH-001
Base UOM: Meter
Order UOM: Kilogram
Inspection UOM: Roll
I have already maintained conversion factor in material master between meter and kilogram.
Is there any way to maintain KG in inspection plan header level and Roll in inspeciton plan operation level?
I tested, but the sample quantity is not as expected. Below is my testing data, please advise, thanks.
10 KG = 1,989 M
100 KG = 1 Roll
GR: 100,000 KG = 198,900,000 M
Sample size = 200 Roll (My expected sample size is 50 Roll)
Sampling plan:
   Lot size                  Sample size           c1                 d1
               8            5     0     1
              15            5     0     1
              25            5     0     1
              50            5     0     1
              90            20     1     2
             150            20     1     2
             280            32     2     3
             500            50     3     4
            1200            80     5     6
            3200            125     7     8
           10000      200     10     11
           35000      315     14     15
          150000     500     21     22
          500000     500     21     22
     10000000000     500     21     22

sorry, my mistake.
This is applicable.
Problem solved.

Problem in displaying totals based on the Unit of measurement.

Hi,
I have Problem in displaying totals based on the Unit of measurement.
I want to display the total in the output of the alv based on the unit of measurement. for example i have three fields in the output namely
Matnr           Quantity      UOM
51                10              EA
61                10              KG
71                10              KG
In the total i should get
                10         EA
                20         KG
Can anyone tell me how to do this?
The basic req is the exclude the qty with unit EA(each) in the totals.
Thanks,
Amit

H i,
you can use the collect statement
to get the proper result
loop at itab. ( all the records)
move all the fields from itab to another
collect itab1.
write: itab1-fields, itab1-fields.
endloop.
this will solve your problem
reward points if helpful,
thanks & regards,
venkatesh

Problem with Unit of measurement

Hi,
I am having problem with Unit of measurement with different languages.
Eg:
In SPRO, I am able to see the unit of measure T3 Description: (Trading unit). in SAP 200 client .the logon language is EN(english).
But if I logon into same client(200) with different language DE(german) version, I am not able to see the description in German, the description field is blank.
Kindly give me a solution for this problem as it is very urgent.
Thanks in advance.
Regards,
Shankar

Hi Aishwarya,
I can think of 2 possibilities:
1. You need to verify passing the Target UoM with the ISO Code as well as the update flag in the 'X' structures.
2. The material that you are trying to pass some UoM does not have the conversion maintained in the Material Master. (Base UoM --> Target UoM conversion in Material Master, contact Functional Consultant).
Also, if you can verify by performing the action manually and check if the Sales Order is getting created manually with the Target UoM .
Regards,
Pranav.

Conversion Problem in Unit of measure 1PAC=100,000 EA

Hi Experts,
I am facing the problem in conversion of Unit of Measures.
If some material has the conversion unit when we order to Vendor.
The Unit of measure is EA, the Order unit is PAC.
The conversion is 1PAC=100,000 EA
But the System is allowing as 1PAC=10,000 EA only and it is not allowing to enter 100,000 EA and throughing the error
Entry too long (enter in the format __,___)
Message no. 00089
How can we increase the characters of the Unit of measure. Like this we have some 50 Materials, I need to increase the length of the conversion spaces. How to do it, Please guide me.
rgds
Swamy

Hi
you can check this out the denominator factor is Stored in structure - SMEINH - field UMREN.
Best option is to maintain decimal place for the UOM , which is more easier to mainatin.
Even if you go through the note the same is explained. Please read below for Too large numerators and denominators
When 120000 CM3 = 0,2 tons (TO), you can no longer save numerator and denominator of conversion ratio 600000 CM3 = 1 TO as numerator and denominator may have maximally five digits.
Here, you must either select a larger volume unit or a smaller unit of weight: With DM3 the conversion ratio would be 600 DM3 = 1 TO, with KG the conversion ratio would be 600 CM3 = 1 KG.
Generally, the alternative units of measure and the base unit of measure should result in quantities that are in the same dimension since the conversion factors may not be larger than 99999/1 and not smaller than 1/99999.
Thanks & Regards
KK
Edited by: Kishore Kumar Chiluka on Apr 22, 2008 8:25 AM

Pricing Record Problem (alternative Unit of Measure)

I am facing a problem in Pricing i.e that the Price is mainly maintained in Base unit of measure(CRT) but the selling is both in Crates and Bottels and the bottels is alternate UOM and Crate is the main unit of measure 90 % sales in crates. but when i enter the qty in alternative uom i.e is bottel price is not calcuated propery
Example
1 crt 24 bt
Price of one crate =216
when i enter bottels as uom the price should be 9 but system is showing 9.07

Hi
Litres is the Base unit of measure and Bottles and Carats are Sales unit of Measure in Ur case and u have maintained wrong figures
Please maintained in this fashion
1) 1 bottle = x litres
2) 1 carat = y litres
in this way when u enter the 1 carat in Sales order system will go here and take the price of 1 litre and then multiply by ( This conversion factor in ur case y units)
so u will get price as 1*y rs .
In pricing please check what condition record u have maintained . Generally condition records are maintained in Base unit of measure i.e the condition record will say 1litre cost Rs 11 .
Hope this calrify .
Please reward -

Problem of unit of measurment in production system

Hi Friends,
I'm facing a peculiar problem of unit of measurement like error in all quantity and curreny fields in report output after transporting a query from quality system to production system but this query is generated from multiprovdier. what might be the problem.
Regards,
Srinivas.

Hi Dave,
Thanks for ur reply. but to trace in monitor it is not showing any error message.
My Mail ID is [email protected] Please the send the document
Regards,
bharat

Unit of measure language problem

Hi experts,
I'm selecting matnr and meins from MARA. In SE11 I see the meins in my language (DB), but when I'm executing my program than I see the Unit of measure as 'ST' (Stück).
Could you help me in how can I get the unit of measure in a certain language?

Wenonah that won't work since the meins in MARA cannot be found in T006.
But finally I found a function module which solves my problem:
CONVERSION_EXIT_CUNIT_OUTPUT
Thanks everybody to trying to help me, I appreciate it.

Inches as unit of measure causes leading problems

In Freehand MX 11.0.2 for Windows (using winxp sp2), I cannot
select inches as my unit of measurement without causing serious
leading issues. If I set type at 10 point with 12 point leading,
the program will convert the leading to 12 inches, making it like
864 points. When using millimeters, it does a similar problem, but
make it 34 mms, or 34 points. Really frustrating. Anyone else have
an issue like this? I've reinstalled several times, and
redownloaded, but to no avail. Also, nothing like this on the known
issues on Macromedia.com. HELP!!!

> In Freehand MX 11.0.2 for Windows (using winxp sp2), I
cannot select inches as
> my unit of measurement without causing serious leading
issues. If I set type at
> 10 point with 12 point leading, the program will convert
the leading to 12
> inches, making it like 864 points. When using
millimeters, it does a similar
> problem, but make it 34 mms, or 34 points. Really
frustrating. Anyone else have
> an issue like this? I've reinstalled several times, and
redownloaded, but to no
> avail. Also, nothing like this on the known issues on
Macromedia.com. HELP!!!
So it happens with inches too.
Kevin (adplus91) asked the same question with the title
"Leading measurements changing".
My reply was:
Only solution is to use Points as measurement units. I've
made keyboard shortcuts for changing between
millimeters and points. Changing units, however, reset grid
value to 6 points or 5mm.
This is a bug Macromedia probably made when they fixed a
conversion bug in Objects palette. Also Macromedia
claimed that this is WinXP only problem but it happens in Win
2000 as well.
Jukka

Round off problem in unit of measurement

Dear Experts
We are in SAP 4.7 , we are having more than 12 plants using same client.
One of our plant requirement we were changed the UOM 'Nos' with 3 decimels allowed.So where ever we not useing decimel places we have to use UOM as 'EA' (each).This is dont have any decimel places.
Now we are in implementation project for our one more new plant in same client. But for them we are going to introduced Batch specific unit of measurement. Base unit of measurement is KG and Batch specific UOM is EA.
All sale material have both unit of measurement , inward or production posting in KG and we will create batch number. We will enter the coversion value of how many quantity per kg for each batch.This will be in 'EA'
While i'm doing transfer posting or consumption or sales for the material in UOM 'EA' , it is coming with 3 decimel places.
If the same UOM 'EA' in normal condition (without batch specific UOM) it is working correctly.It is getting roundoff correctly.
Please help me out on this.I need the consumption should not be decimel places for UOM 'EA'.
Suresh

Hi Senthilkumar SD,
You have not read the thread before posting.
It quite clearly states that the UOM EA already has NO DECIMAL PLACES.
Quote "<b>we have to use UOM as 'EA' (each).This is dont have any decimel places."</b>
It is good to see lots of people trying to help and so I am pleased to see you trying, but it really doesn't help if you haven't read the question before posting the answer.
Steve B

Unit Of Measure problem

Similar Messages

Maybe you are looking for