Unit of measure - rounding off during creation of planned order

Dear All,
We have defined one material OIL in MM41 and its UoM is EA also we have put alternative UoM is L(liter).
now we create BOM of semifinished material we use this oil as a component and enter its value in decimal points.
e.g 0.375 EA
During planned order creation or REM backflush system convert this quantity to 1 EA ,WE dont want this automatic conversion .
We have uploaded all master data in production and now it is very difficult to change all BOM
So what is the solution of this that system can not convert qty (rounding off).EA
Kindly reply
Sunil

Hi Sunil,
IN CUNI Transaction Field Decimal Places is for displaying the decimals,there is a decimal place Rounding off field below,there try to maintain 3 decimals and check whether it is working.
One more thing is Unit EA will be used always as non decimal unit,But i dont know in your buisness how for unit EA there is a decimal qty
Edited by: Girish  Adaviswamy on Mar 2, 2010 10:59 AM

Similar Messages

  • Problem in VAT Round off during MIRO

    Hi Friends,
    I having problem in VAT round off during MIRO. We have created PO with excise +VAT. VAT amount has been rounded off. After GRN, we are trying to post the Invoice in MIRO, the VAT amount shows with Decimal.
    We are using TAXINN, in the tax pricing proceedure i have mede 17 for call type for VAT condition type. in OB90 we have mede the rounding rule as 100 for currency INR.
    When i create the FI direct invoice using the same Tax code it works fine, but having problem in MIRO. I want the decimal should be rounded to the nearest value.
    Can any one help me is there any standard set up where we can arrive this?? OR is it required any user exit??
    Regards,
    Deva

    Check whether you can use the user exit function module KR_USER_EXIT_ROUNDOFF
    Regards,
    SDNer

  • Price per unit is getting round off to two decimal places.

    Hi Gurus,
    In the Billing output, the Price per unit is getting round off to two decimal places.
    How can we avoid this or allow 4 decimal places for such cases.
    In the same pricing procedure, we have two pricing condition types PR02 and ZR01.
    When PR02 is being used,it doesnt rounds off Price per unit.e.g .578888 = .578888
    But when ZR01 is being used the system rounds off price per unit.e.g.578888 = .58
    Please suggest where is the setting for it.
    Thanks
    Montee

    Hi,
    Which currency you are using? If its INR, then it will do only for 2 decimal places.
    The solution for ur problem can be ractified by changing the scales :
    Also check OSS 80183
    Thanks,
    Raja

  • !How to find out follow up activities created during creation of an Order??

    Hi Gurus,
    I want to find out the number of follow up activities created during creation of an Order??
    Is there any BAPI or Function Module which can detrmine the number of follow up activities after creation / saving an Order..
    Please Reply fast.
    Thanks
    Pranay

    Hi Pranav,
    I am confident this will solve your problem:
    <b>Step 1.</b>
    Enter the guid of the current order into function module
    CRM_DOC_FLOW_READ_DB.
    Code:
    DATA : t_doc_links TYPE crmt_doc_flow_db_wrkt,
               v_guid TYPE crmt_object_guid.
    v_guid = <guid of the order from table crmd_orderadm_h>
    CALL FUNCTION 'CRM_DOC_FLOW_READ_DB'
                  EXPORTING
                    iv_header_guid = v_guid
                  IMPORTING
                    et_doc_links   = t_doc_links
                  EXCEPTIONS
                    error_occurred = 1
                    OTHERS         = 2.
    <b>Step2.</b>
    Now loop through the returned table ie t_doc_links.
    Records which fulfill the following criteria are
    the follow up records.
      reltype    = 'VONA'
      objtype_b  = 'BUS2000126'
      objkey_b   =  v_temp
      roletype_b = 'NACHFOLGER'
      roletype_a = 'VORGAENGER'.
    <b>Step:3</b>
    Now Count the records which fulfill the above creteria.
    This count represent the number of followups created.
    <b>REWARD THE ANSWER WITH FULL 10 POINTS IF UR PROBLEM IS SOLVED.</b>
    thanks,
    ashish.

  • Error during creation of transfer orders for material

    Hi,
            We are doing a transfer of stock from one storage with WM to a storage without WM.
    But system does not finish the process automatically displaing the following error message:
    "Error during creation of transfer orders for material document 49000XXXX"
    System cannot find source storage bin
    Thanks in advance for the help
    Regard
    Enzo

    your picking strategy does not find the bin where the material is.
    So you need to check what value you have entered for picking in WM view of material master.
    then you have to check where your material is (storage type and bin)
    then you need to check customizing to where what storage types are included in the picking strategy that is tight to the material master entry.

  • Rounding off value problem in sales order

    Hi All,
    This is related to a rounding off value problem in sales order.
    The problem is described by an example which is as follows -
    Selling Price of Material A = Rs. 176.76
    Excise charged = Rs. 21.80
    Total Price = Rs.176.76 + Rs.21.80 = Rs. 198.56
    On this total Trade Discount (ZDTD) having access sequence,is calculated  at the rate of 4% = Rs. 7.94
    But the condition base value after the discount is showing Rs.198.60 instead of Rs.198.56
    I want the system to reflect the value as Rs.198.56 intact and it should not round up to the nearest value i.e. Rs. 198.60
    Why is this happening? Is it possible to reflect the exact value? If yes what is needed to be done?
    The commercial round off is activated for the DIFF Condition Type.
    Looking forward to some valuable suggestions.
    Thanks & Regards
    Priyanka Mitra

    Hi Ramesh,
    Thanks for your suggestion but the problem has been solved by me.
    Regards
    Priyanka Mitra

  • Header Material Repeated during creation of production order

    Sir,
    I have defined bom as one component and 3 co product.
    During creation of production order in operation overview i found header material is repeated in components.
    Pl. suggest me where i have made mistake.
    Regards,
    Vivek

    Hi
    Check whether BOM is recursive or not? also check the movement type against the header material.
    Also check in CO03>Goto> Material list
    Regards
    Anupam Sharma
    Edited by: anupam sharma on Jan 30, 2012 12:17 PM

  • Problem During Creation of Production Order

    Dear Sirs
    Hope you all are well. I am facing a problem in PPDM during creation of Production Order which is that when I try to release the order System shows me material availability error for BOM items but when I check those material in MMBE(stock overview )all materials are available in UN-restricted use stock. I am facing this problem and not able to resolve it please help me out in it.
    Thanks
    Regards ,
    Haseeb Khan
    Senior Consultant

    Dear
    Did you maintain Work Schedulimng View of the Material ??
    Did you maintain any Production Storage Loaction in MRP2 view and same is appearing in Goods Movement Tab in CO11N screen with Movement Type 101 ??
    Did you maintain the Operation Control Key -pp03  which should have Auto GR check box marked in OP00 ?? Goto Operation Control key -Detail information -Check whther Auto GR is marked or not ??
    If you are using Serrial Number Profile and Serial Number , then Auto GR is not possible .Make sure that you are not haveing functionality because it does not support Auto GR fro serialised material and need to do it through MIGO/MB31/MB1C.
    Make sure that you have used PP03-Control key only at last operation not all the operations.You need to maintain PP03 at Routing level and call the function by Read PP Master data  at production order level   (co02-function read pp master data )
    Regards
    JH
    Edited by: Jiaul Haque on Feb 14, 2011 12:55 PM

  • Change Production version during creation of Process Order COR1

    Hi,
    Scenario:
    Based on the entered Material, Plant and Order type system need to trigger a popup asking the user to select the Production Version. This should happen before clicking on SAVE button, so that all the values will be populated correctly based on the changed VERID.
    I did not find a user exit that enables to change the Production Version (VERID) value. So I thought of displaying the popup in the user exit EXIT_SAPLCOZF_003 which will be triggered before initial screen appears, export the selected value and pass it to a User Exit or BADI where VERID can be changed. But cannot find a user exit to do it.
    Please help me find a User Exit or BADI to change the Production Version during creation of Process Order using COR1 transaction before clicking on SAVE button.
    Thanks,
    Manoj.

    Hi Manoj,
    So - almost four years later - I saw your post and I saw myself in the very same situation as you did...
    I found a solution for those who wants to change the production version of the production order from the sales order creation: create an enhancement in the function module 'MD_VERSION_SELECTION' and you are good to go.

  • Error during creation of transfer orders for mateRIA

    hi gurus,
    I am getting an error while moving material from sl0c2 to sloc1 which is connected to wh by mvmt 321. the document is getting posted and the stock is coming to sloc1,but the error is
    "Error during creation of transfer orders for mateRIAL.how to correct the error.
    regards
    murugan

    Hi,
    The material is maintained at the Warehouse level, hence warehouse transactions have to be completed, by creating a transfer order and the confirmation of the same will create a transfer posting from SL1 to SL2 in the system. This is trigerred automatically depending on the sytem configuration.
    Regards,
    raghu

  • Automatic Creation of Planned Order in PPDS Horizon

    Dear Experts,
    Kindly answer my following query.
    I have created PIRs before/inside my PPDS Horizon (its also falling outside horizon as SNP horizon is shorter than PPDS Horizon). If I check the PIRs created by me in /SNPAPO/RRP3, it also shows me planned orders corresponding to them. However, if I create PIR outside PPDS horizon then system is not automatically creating the planned order.
    Kindly let me know which master data/configuration setting is responsible for automatic creation of planned orders within PPDS horizon.
    Best Regards
    Rinju
    Edited by: Rinju Mukherjee on Sep 26, 2010 10:05 AM

    Dear Rinju,
    Check in Product Master PPDS view the Planning procedure maintained? if it is balnk check in the heuristic, the palnning procedure maintained.
    Since automatic planning procedure(3) is maintained, that is the reason it is creating order proposals, it self.
    Sree

  • Mass creation of planned order

    Hello,
    is there a way to mass creat a planned order for a finished product? having same FG mat, plant and prod version.
    Thanks

    Dear
    1.Goto MD61 with User parameters like Plant , Requirement type , Version and Planning Date .Then Select the Material Radio Buttion with FG item code .
    2.Enter the FG qty as required in each month as demand
    3.GotO MD02-Single Item ,Multi Level with indicator : NETCH , 2,1,3,3,2   and Execute the MRP to create the Planned order  for FG
    4.Check the result in MD04
    There is no SAP Standard Traction to Mass creation of  Planned Order .That is possible in Demand Creation and MRP run .
    Regards
    JH

  • Block the creation of planned order

    Dear experts
    How can I control the creation of planned order? I want to block the creation of planned order if the BOM or routing is not exist.
    BRs

    Hi,
    I think this can be done using 'Material status' try the following and let me know if it works.
    Create a new material status in transaction OMS4 (like R1 - "Created but BOM and Routing not maintained" )and in the details screen select Option "B" for MRP messages.
    You designate a material as a "R1 -Created but BOM and Routing not maintained" In the master record.
        MRP                          "B" = warning
    Please try this and let me know the result.   
    Regards,
    Prakash

  • No alternative unit of measure specified, during creation  of sales order

    Dear Experts,
    when user is creating sales order, User is getting the error message no.  MM108  "No alternative unit of measure specified" for particular material.
    we have checked the alternative unit of measure it is already maintiained in the material master.
    we have checked the OSS note : 117611 - Error message MM108 during goods receipt for order, but we couldn't get exact results for our issue.
    can you provide  the exact reason and solution to over come this please  .
    Thanks in advance.
    Regards,
    Suresh Veerepalli

    Dear Experts,
    The Base Unit of Measure (L) and Sales unit (PCE) ,The alternative unit of measure is maintianed in the material master as shown below.
    X                  AUn               Measuremt unit text           Y                   BUn               Measuremt unit text 
    1     L     l     <=>     1     L     l
    1.121     KG     kg     <=>     1.000     L     l
    1     PCE     Piece     <=>     1     L     l
    1     BDL     Bundle     <=>     12     L     l
    1     PAL     Pallet     <=>     720     L     l
    Error is gettting when creation of Sales Order ,Order is standard order.
    When we double click on error message  the following details are shown.
    1.No alternative unit of measure specified
    message no:MM108
    2.Diagnosis:
       This alternative unit of measure is missing.
    3.System response :
       The system cannot carry out conversion
    4.Prodedure:
      This is due to Program error that should not occur.
    Please provide the exact solution on this issuse.
    Thanks

  • Unit of Measure "Round up to next Integer"

    Hi All,
    I have a unit of measure BAG, I have defined it with zero decimal places.
    When I enter 1.5 it becomes 2 and when 1.49 it becomes 1.
    I want to round it up to next integer i.e. 1.2 should become 2 and so on...
    Please suggest how it can be a ahieved?
    Regards,

    Hi
    I have maintained said field as Blank.
    system is rounding up the value but to the nearest integer whether I want it to be the higher integfer.

Maybe you are looking for

  • How to authenticate userid and password of b2b user in a b2c portal

    I am having a reqirement in B2C web portal , where in i have to create two input text fields which will accept userid and password ( the userid and password will be of b2b users)and button to logon and if i click on the logon button, it should take i

  • Issue with using subtemplate in E-Business suite BI Publisher report

    Registered subtemplate in XML Adminstrator and also in main temlate using syntax below <?import:xdo://SDS.SDSRAXINVFTF.en.US?> and calling subtemplate in main template footer <?if:OPER_UNIT='3217'?> <?call-template: SDSRAXINDFTF?> <?end if?> Report o

  • Add Web Page to Existing PDF in IE

    Hi, Does this function work when the URL stays the same? (Found this possible explanation in another forum.) It appears it does not. Is there a workaround? Thanks, Kevin Using Acrobat 8 Pro on XP SP2.

  • Calling an actionListener in a method

    Im trying to call the method ticktack() Everytime startButtonHandler is performed it must go immediately to the ticktack() method my problem is it has an error "illegal start of expression" My question is: what's the proper way of calling or coding a

  • Mounting drives

    Fairly generic Linux question but does my non-root user have to belong to any specific groups to be able to mount the disk drive and usb drives? Whenever I try to access one as my non-root user I get a "Not Authorized" message box (in GNOME).