Unit of measure ST is not defined as a commercial unit
Hi Experts,
While doing Punch Out catalogue in the Maintenance Order, i have received the following error "Unit of measure ST is not defined as a commercial unit".
I have checked in the transaction CUNI, and ensure that the above UoM is maintained.
This is a standard error message M3 491.
Any pointers will be appreciated....
by
Prabhu
Hi Prabhu,
GOTO CUNI
Check whether Commercial meas.unit field is ticked or not in application Parameters tab.
If not maintained, maintain here the tick
Regards,
Amol
Similar Messages
-
Error while creating PO -- Unit of measure not defined for lanuage ZH
Hi all,
i have created the PR with EA as UOM. Then while creating PO, i am getting error like
' Unit of measure not defined for lanuage ZH' .
Then I execute CUNI
Then menu is GOTO > Translation > units of measure
enter source language and target language . After this i am getting the below message
---> Language not available on server
Please suggest what i should do. Thanks.
Thanks
pabiHI Pabi,
Go to material master for material in purchase requisition, the Go to Additional data and maintained language as ZH in material master data.
Also the other possibility, that if in your case purchase requisition are converted to purchase orders through background jobs,
then check the background job execution in SM37 whether that background job has been triggered twice parellely in the background, which could have resulted in locking of same purchase requisition at same time and hence your are getting the Error.
Br,
Tushar -
Hi,
I am using the BAPI_MATERIAL_SAVEDATA to create material in the material master, I am passing
ls_bapi_head-basic_view = 'X'.
ls_bapi_head-purchase_view = 'X'.
ls_bapi_head-mrp_view = 'X'.
ls_bapi_head-storage_view = 'X'.
ls_bapi_head-quality_view = 'X'.
ls_bapi_head-account_view = 'X'.
these views, I am passing the necessary details to the BAPI . But it is giving me an error ' **Unit of measure ****** is not defined; check your entry**'. plz help me how to solv the problem.
Thanks,
shekarHi Vinod,
It was very usefull for me thanks,
I have another problem i have to pass Valuation Class - bklas and in quality view nspection Type - 'art', Inspection Type - Material Combination is Active - 'aktiv'.
please let me know how to pass these values to FM
thanks,
shekar -
Unit of measure not defined for language ZH
Hi,
We were creating a PO when we encountered the error which states "Unit of measure not defined for language ZH".
We executed CUNI to translate the units of measurement to our target language. System prompted "This object was segmented. Only new lines evaluated." What does this mean?
We tried creating the PO again, however we encountered the same error that the unit of measure was not defined for the language.
Please recommend action/s that we should take. Thank you.Take a look at the below threads. Your problem has the solution.
Re: Unit of measure XX not defined for language DE
Re: Unit of Measure Error in Purchase order -
Unit of measure JHR not defined
Hi Friends,
What can cause this problem. I am getting this error message
"Unit of measure JHR not defined" after I am creating a Shopping card in EBP.
JHR is existing on both sides Backend and EBP in the table T006.
Regards
Marco M.COM_PRODUCT_UNIT
you need to debug this program . JHR is not SAP or international UOM . it could be customised one
COM_PRODUCT_UNIT_READ_API
Is a unit of the product convertable into i_unit?
CALL FUNCTION 'DIMENSIONCHECK_DIMENSIONLESS'
EXPORTING
meinh = iv_unit
EXCEPTIONS
dimension_not_dimensionless = 1
t006d_entry_missing = 2
t006_entry_missing = 3
OTHERS = 4.
CASE sy-subrc.
WHEN 0.
MESSAGE e020(com_product_unit) "unit is dimensionless
WITH iv_unit
RAISING unit_not_allowed.
l_lines = l_lines + 1.
CALL FUNCTION 'COM_PR_UNIT_CHECK_CONVERTABLE'
EXPORTING
i_base_unit = ls_base_unit-unit
i_alt_unit = iv_unit
i_tabix = l_lines
it_pr_unit = lt_pr_unit
IMPORTING
e_add_const = l_add_const
e_numerator = l_numerator
e_denominator = l_denominator
e_unit = l_unit
e_sub_num = l_sub_num
e_sub_denom = l_sub_denom
EXCEPTIONS
not_convertable = 1
overflow = 2
OTHERS = 3.
CASE sy-subrc.
WHEN 1.
MESSAGE e020(com_product_unit)
WITH iv_unit
RAISING unit_not_allowed.
CALL FUNCTION 'COM_PR_UNIT_CHECK_CONVERTABLE'
EXPORTING
i_base_unit = ls_base_unit-unit
i_alt_unit = iv_unit
i_tabix = l_lines
it_pr_unit = lt_pr_unit
IMPORTING
e_add_const = l_add_const
e_numerator = l_numerator
e_denominator = l_denominator
e_unit = l_unit
e_sub_num = l_sub_num
e_sub_denom = l_sub_denom
EXCEPTIONS
not_convertable = 1
overflow = 2
OTHERS = 3.
CASE sy-subrc.
WHEN 1.
MESSAGE e020(com_product_unit)
WITH iv_unit
RAISING unit_not_allowed.
WHEN 2.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4
RAISING overflow.
E COM_PRODUCT_UNIT 020 Unit of measure & is not defined for product
When do you get this error ? while ordering Internal goods and services or describe procurement?
or while procure from catalog. -
" Unit of measure ****** is not defined; check your entry in table T006
I´m Trying to create a material from MDM to SAP and I´m monitoring the IDOC in WE05 and i get the next message:
" Unit of measure ****** is not defined; check your entry
Message no. M3490
Diagnosis
The key for the unit of measure you entered is not defined in table T006.
Procedure
Define the unit of measure through Customizing (Materials Management). "
In MDM we are sending as remote key the SAP Code and this code exists in the table T006, but in the information of failed IDOC say:
" Messages have been issued: number 0000000000184470
Message no. MK101
Diagnosis
During inbound processing for the IDoc, messages have arisen while checking material data. "
If someone has information about it ,pls I´ll appreciate your answer.
Regards Itzell T.I´m Trying to create a material from MDM to SAP and I´m monitoring the IDOC in WE05 and i get the next message:
" Unit of measure ****** is not defined; check your entry
Message no. M3490
Diagnosis
The key for the unit of measure you entered is not defined in table T006.
Procedure
Define the unit of measure through Customizing (Materials Management). "
In MDM we are sending as remote key the SAP Code and this code exists in the table T006, but in the information of failed IDOC say:
" Messages have been issued: number 0000000000184470
Message no. MK101
Diagnosis
During inbound processing for the IDoc, messages have arisen while checking material data. "
If someone has information about it ,pls I´ll appreciate your answer.
Regards Itzell T.
Hi Itzell T,
While creating the material the unit of measurement which is entered is not existing in the SAP System. The unit of measurement entered during creation of material is cross checked from enteries of check table T006.
So, functional consultant should take care of this issue just let him know the message.
He know what problem actually is and fix the problem as Ankur had said. -
Error message :PurchOrder : Unit of measure PC not defined for language ES,
Hello,
I am facing a problem with PO replication to R/3 backend.
POs are not replicated to R/3, POs are in status 'Transfer Failed (E.Sys.)' .
When I check with 'RZ20' transaction I got this message :
PurchOrder : Unit of measure PC not defined for language ES.
SRM 4.0 Extended classic scenario
Regards,
ShaiekHi
This seems to be a configuration issue,.
Pls maintain the unit of measure in configuration using transaction CUNI
Hope this will help.
Pls reward suitable points.
Regards
- Atul -
Error as unit of measure PC not defined for language RO while creation ofPO
Hi GUYS,
When am trying to create a PO in ME21N transaction i got error as below,
unit of measure PC not defined for language RU
Message no. 06079
Table 006A contains no entry for this unit of measure
Please let me know what action to be taken from my side to over come this issue.
Note: If i check the related vendor i could able to view that the language maintained as RU.
Cheers,
Kumar.SHi Jurgen,
Thanks for your reply once again.
As mentioned by you earlier i have tried to login with languae RU in Q system but unfortunately i got an error saying taht language not installed.
Also we found for Language - EN and UOM - PC has been maintianed in T006A table.But if i check for lanugage - RU and UOM PC combinatoin has not manintaned in T006A table.
Please let me know how to maintain the values in this table T006A for combination Lang - RU and UOM - PC.
Please revert back with your soilution.
Note: I have tried in SM30 but failed due to below error
The maintenance dialog for T006A is incomplete or not defined
Cheers,
Kumar.S -
Unit of measure PCS not defined for language FR
Dear Gurus,
I try to raise a PO in ME21N, when saving the order, I am being prompted by the system with the following message:
"Unit of measure PCS not defined for language FR"
I then went to MM02 to check the material master data "Sales Text" Tab.
There the only language available is English, so I clicked on the "Language Maintained" Tab and created a new language for French.
The problem is that when I want to save the changes, the system prompts me with the following message:
"Blank texts exist in the following languages: French and English, these texts will be deleted"
Then the Material Master Data closes and no changes have been made.
Can you please guide me through step by step of what I have to do to be able to populate the field "PCS" for pieces in French so that it is taken into account in the Material Master Data and by extension in a PO.
Thanks for your help.
KInd regards
ChrisHi Chris,
Goto T code CUNI. In the first screen click on GOTO-Translation-dimension.
Enter EN in Source language and FR in Target.Maintain the entry there. -
Unit of Measure TON not defined for language PT ?
Hi all,
I'm new to MM and to SAP in general and I have 2 questions for now :
1. I have a requisition which is set up using unit of measure TON. When I try to create the PO, an error message pops up saying " Unit of measure TON not defined for language PT ". Do you know what does language PT means and why does this error appears? When I try to convert the TON into TNE, the same message pops up : " Unit of measure TNE not defined for language PT ".
I also can not convert TON into EA...any ideas why?
2. How can I see the total value of a PO that has many lines ?
Thank you very much
IulianaHi
Is this error "" Unidade de medida *** não definida em idioma PT ""
appearing only when you select Ton, or any other unit.
pl. clarify.
I have seen that you get this message when your loging Login language is Portuguese.
Any how Configuration of units needs to be checked in
Spro >General setting > check Units of measurements ,
( or pl. use Tcode -- Cuni )
I also can not convert TON into EA...any ideas why?
can you give me some more inputs, what erro are u getting ?
2. you can see the total Po. values in Po header details
under status tab view.
if my soln is found usefull
Pl. award me points
Thanks
Prasanna kumar .b.a -
Unit of measure EA not defined for language PT
Hello,
Vendor Communication is maintained in "Portuguese language-PT", while creation of Scheduling agreement system will given the below error, bcz Scheduling agreement will taken the Langause from vendr master
"Unit of measure EA not defined for language PT"
Table 006A contains no entry for this unit of measure.
We have cross checked Material master and maintained the "langauge-PT" in material master additional data.
Checked T006A table for "EA" found for language "EN, DE, CN etc. not for "PT" how to maintain T006A table for Portuguase langauge.
Regards
Mahesh Naik>
Mahesh Naik wrote:
> Hello,
>
> Suppose we have changed the source langauge "EN" to Target Langauge"PT" is it change all the Unit from EN to PT. after that how the system will pick english language's
No, it just gives you all the units maintained in that source language as a proposal to enter the description in target language PT, there will not be any change to the source language EN while maintaining a translation. -
Unit of measure EA not defined for language RU
Hi gurus,
have you encountered this error while creating a PO? can't find any supporting document online.
please help how to resolve.
thanks,
mmHi Manohar,
Language RU (Russian) is not defined in our system and therefore the translation in CUNI is not the appropriate solution for this error.
Instead, we just maintained the vendor master to be in EN language to stop the system error.
thanks for your input anyway.
melanie -
Dear community,
I am still working on SAP PPM FICO & CATS integration.
I can't replicate my cost/revenue rate in the ECC system.
There is the error message : Cost/revenue rate (name of the cost/revenue rate) : unit of measure PDA does not exist
Does someone know what PDA is ?
I customized the units with FTE.
Thank you in advance for your help.
Best,
CassokéHi Cassoke,
Through analysis found that you need to define 'Units of Measurement' PDA which is linked to the capacity unit 'FTE'.
Just check whether you have the PDA unit of measurement in tcode-CUNI or under SPRO-->PPM-->Portfolio Management-->Global Customizing-->Global Settings-->Define Units of Measurement.
Select dimensions 'Time' and click on 'Units of Measurement' and if no PDA entry is there, create an entry(Attached screenshot for your reference).
Hope this helps.
Regards,
Ravi -
O4G1 - Unit of measure group does not exist
Dear all,
This is error exists in O4H1 : Unit of measure group does not exist.
I have created the group following by this path: Industry Solution Oil & Gas (Downstream) -> HPM (Hydrocarbon Product Management) -> Oil- and Gas-Specific Units of Measure and Additional Stockkeeping Units -> Define additional stockkeeping units of measure (Transaction O586).
But i don't know how to use this UOM group. Pls help!
Thanks,
Edited by: Le Vinh Quang on Dec 29, 2010 8:05 AM
O4H1 --> O4G1Hi,
Maintain in the Material Master data for your material.
The UoM Group field is on the Oil-specific data tab in MM02.
BR,
Barna -
LSMW Sales unit ****** 1 is not defined for item 000000 2
Hi, all,
I am trying to create order using LSMW with
Object 0090 Sales documents
Method 0000
Program Name RVINVB10
Program Type D Direct Input
The issue is at the Sales Unit.
I prepared the unit as PC in the folloiwng 3 fields
ZIEME Target quantity UoM
VRKME Sales unit
MEINS Base Unit of Measure
But get the following error, any thoughts?
Start of processing
V1 384
Sales unit ****** 1 is not defined for item 000000 2
Data from this document has not been saved ***Alright Koffer,
I'll give U the place, from where this error can occur, check which is applicable to you:
1) In FV45PF0M_MARM_SELECT, after calling the FM MATERIAL_READ.
2) In Include, FV45PF0V_VBAP-UMVKZ_ERMITTELN, after calling the FM : MATERIAL_UNIT_CONVERSION.
3) In Include FV45PF0V_VBAP-VRKME_PRUEFEN, after material unit conversion.
4) In Incl. FV45PFAP_VBAP_FUELLEN_MAAPV, after call to the FM : F4_ALLOWED_QUANTITY_UNIT.
If U understand German( Ich Keine Deutsch lernen ), U might go to these programs and check the description.
However, all these point to the Sales Unit as U already know.. check all the data related to the Sales Unit and whether this unit is allowed for the material being used.
Rgds,
Raghu.
Maybe you are looking for
-
Upgrade from SCM 5.1 to SCM 7.0 SR1 (with NW 7.0 EHP1 SR1)
Hi folks, we are trying to upgrade our SCM5.1 to SCM 7.0 SR1. There seems to be a problem in the phase, where SAPup is trying to detect the needed CDs / DVDs. SAPup recognizes that "FRP" is used within the system. There appears a dialog to enter the
-
Font Not Working in PDF via CFDocument
I am writing to a PDF document via the CFDocument tag. The font I am using is properly loaded on the server and is working when displayed in a broweser window. However, when the contents are written to a PDF file the default font is used, not the one
-
Best strategy to upload a big data file and then to insert in db the content
Hi, Here's our requirement. We have a web business application developed on JSF 1.2, JE66, WebLogic for application server, and Oracle for the data back end tier. We need to upload big data files (80 to 100 Mb) from a web page, and persist the conten
-
When I am trying to purchase a song, it is saying there is an error in the iTunes store with the number45054. I also have $15 to redeem from an iTunes card. It shows on my account by my name, but when I try to purchase a song, it will not give me t
-
2012 Upgrade to R2 - Client Protection Agent Upgrade - Reboot?
MSFT states in their upgrade doc for DPM 2012 R2 "You must upgrade all of the protection agents. This might require a restart of the protected computer." What has been your experience reboot/no reboot as I know agent upgrades during past couple years