Unit of measure translation using CUNI

Hi,
I am trying to maintain unit of measure translations using CUNI transaction.
When I save the translation detail system doesn't ask for transport request number.
What could be the reason? Any idea?
Thanks,
Dipak

Hi Dipak,
the following SAP Notes might be helpful:
[1047291|https://service.sap.com/sap/support/notes/1047291] "RBZMETRANS does not transport ISO codes"
[639459|https://service.sap.com/sap/support/notes/639459] "Error message BM302, BM303, BM304"
Best regards,
Andreas

Similar Messages

Issue unit of measure being used in purchasing tab of work order

Hi, I've got a material with a base unit of measure of 'EA'. This material has a issue unit of measure 'BOX'. When I go to add this material as a component to a work order the unit of issue 'BOX' is used as the base unit of measure. This of course is incorrect. Can anyone shed any light on this?

Not sure whether it will help you.
Have you maintained the relationship in MM in Additional uom tab.
Also check t code CUNI if any conversion factor you can mention there.
Regards,
Divraj

HELP Make Settings for Units of Measurement for Monitoring of Consumption

Hello All:
I just cant' define an unit of measure to stablish consumption calculation. I know how to make all the other settings, but I just can't stablish the unit of measure to use in there.
Could please somebody gime this explanation ? Step by step ?
I've read that are preconfigured units of measure for examplo MPG miles per gallon US but I will use Kilometers per litre.
I want to know how to create this unit
how to link it with an existing SI group
So I can use it in the step Make Settings for Units of Measurement for Monitoring of Consumption
thanks in advance
Luis Henrique

Dear Luis,
Please use CUNI t code for creating unit of measurement. Please follow any exist Unit of measurement and replicate the same. This is a configuration so will have transport requirement
Regards
Gajesh

Change base unit of measure

Hi,
Its me again. I need to change the base unit of measure of a material but a task listw as created via QP01. I tried to delete this via QP02 but i still cannot change the base unit of measure. Is there any way except for deleting the task list via CA98?
Thanks.
Elen

Ellen,
Unfortunately the answer to your question is no..You have to use a transaction like CA98 or QSR6 to delete the Inspection plan from Database. Please take necessary authorisation and delete this plan.
Alternately set this material to with deletion flag and client & plant level status, so that you cannnot use this material any longer. Now create a new material with correct Base unit of measure and use this material.
Regards,
Prasobh

Cost/revenue rate E_MOE_DEC, 00000000: unit of measure PDA does not exist

Dear community,
I am still working on SAP PPM FICO & CATS integration.
I can't replicate my cost/revenue rate in the ECC system.
There is the error message : Cost/revenue rate (name of the cost/revenue rate) : unit of measure PDA does not exist
Does someone know what PDA is ?
I customized the units with FTE.
Thank you in advance for your help.
Best,
Cassoké

Hi Cassoke,
Through analysis found that you need to define 'Units of Measurement' PDA which is linked to the capacity unit 'FTE'.
Just check whether you have the PDA unit of measurement in tcode-CUNI or under SPRO-->PPM-->Portfolio Management-->Global Customizing-->Global Settings-->Define Units of Measurement.
Select dimensions 'Time' and click on 'Units of Measurement' and if no PDA entry is there, create an entry(Attached screenshot for your reference).
Hope this helps.
Regards,
Ravi

Decimals regarding Unit of measurement

Dear Experts,
I'm facing to an issue related to the following unit of measure : KM and DAY.
I would like to add decimal places for these units of measure (3 places after decimal point) because actually it is 0 by default. I heard that it is not recommended.
These above units of measure are used in our material masters. And there are some open purchase orders, contracts for these materials.
Thank you for your help.
Best regards,
houcinne

Hello Lakshman,
I agree with you for not changing this table. I think it's risky. So I've decided to use another unit of measure such as H (hour) and M (meter).
Best regards,

Issue in Alternative unit of measure (MARM) update using MM17

Hi,
I have tried to update alternative unit of measure (MARM) for some materials using MM17.
It is working for some unit of measures (Like FT).
But if I try to changes the unit of Measure value for PLB (Counter & Denominator) or DLB it is changing for UNC, if UNC unit of measure is not there for that material then the UNC is getting created.
But according to MM17 functionality I think PLB values should change.
Please check and let me, if you have any solution or any one faced the same issue.
Thanks
sham.

Hi Sham,
Your problem could be caused by wrongly assigned ISO codes to the unit of measures involved. Most probably to these unit of measures   the same ISO code is assigned. This leads then to problems in the ALE interface of the material master, which is used too by the mass maintenance transaction MM17.
There only the ISO-code is given and then the System doesn't know the correct unit of measure, which
should be used. So it is possible, that the change is done for a wrong unit of measure.
Please check for this your customizing in transaction CUNI.
Regards
Mauro

T006-Decan change after users have used the TO unit of measure

Currently in our system for TO (tonnes) it has T006-Andec as 3 and T006-Decan as 0 and it issues the users a warning message "Order quantity violates rounding rule" if they type in decimals in the purchase order quantity. We have been asked to change T006-Decan to a 3 and do away with the warning message. What happens if you change T006-Decan from 0 to 3 after users have already used the unit of measure (TO) in the R/3 SAP_APPL 470 system on materials, purchase orders, sales documents, receipts, etc...? I don't want to impact our users in production since I do not where this unit of measure has been used. Any advice is welcomed. Thank you.

Hi
If you are changing the decimal places in T006 - DECAN , the number which was 1000 would show as 1,000... so previously it was 1000 tonnes now it will show as 1 tonne.... such things happen....Check with SAP before doing changes to the Standard UOM's...
I am not able to find the correct SAP note for this.... but its there hope you get it
Thanks & Regards
Kishore

Load multiple Units of Measures using RMDATIND in LSMW

Hi All,
   I have created a conversion for materials using LSMW. I have used the standard direct input
   program    RMDATIND.
   Requirements have changed considerably over a period of time and now the new one is that I need to
   load multiple alternate units of measure for each material.
   The issue when using RMDATIND is that the structure BMMH6 for alternate units can hold only 1
   record at a time and my one single legacy source record has the information for two alternate units of
   measure.
   The LSMW that I created cannot handle this right now as it can load only one Unit of Measure as
   BMMH6 can hold only one record.
   Is this a limitation or is there a workaround/solution for this issue of mine in LSMW while using <br />
   RMDATIND.
   I will greatly appreciate any useful inputs in this regard.
Thanks,
Vamsee

for this use LSMW BAPI method
Business Object      BUS1001006   Standard material
Method               SAVEDATA                    Create and change ma
Message Type         MATMAS_BAPI                 Create and change ma
Basic Type           MATMAS_BAPI02               Create and Change Ma
in this method you habe below strctures...
E1BP_MARM       Units of Measure
E1BP_MARMX      Checkbox Structure for BAPI_MARM

Unit of measurement transport translation

Dear all,
i´ve translated the description from the unit of measurement ST. At the beginning in the translation i get a popup, that theres no automatic recording. But how can i create a own transport request or how can i save the translation in a transport request?
Thanks & BR

Yes, its set.
At the beginning of the translation of units of measurement i get the following message:
"The translation tool is not linked to the automatich recording. Any translations that have to be transported must be written especially in a transport request."
There must be any possibility to create a new request, but how?

Unit of measurement in CUNI.

Hi All
In Cuni transaction
For unit of measurement= Volume and SI = M3,
But due to some changes happend and now SI = KL,
Now my question i want to change SI=M3 again in Volume ,how it will be possible , i tried it by new entry but the field SI is disable . is there any option.
Rgds
Ana.

Hi,
Transaction = CUNI.
Unit of Measurement -> select Volume.
On the top toolbar, you would see options Display, Delete, Transport, Create. Next to it is a button called "Declare SI unit".
Click this button. In your case you should see two entries : one for KL & one for M3.
Select the radio button for M3 and press SAVE.
Hope this solves your problem.
Regards,
Rajesh

Mass upload of Alternative unit of measure using MASS

Hi All,
Can some one guide me how to upload alternative unit of measure using MASS Transaction - can you elaborate like fields to be considered also, as I am trying using MM17 but could not go further.
Thanks,
Vengal Rao.

it is possible to create alternative units using MM17. But I would not use the word upload in that matter, as you cannot upload from an external file.
start MM17-
select table MARM and execute
you see 2 tabs,
you are at the Change record tab, please set indicator for do not change existing data, then go to the creation tab
enter the material number and the alternative unit you want add .
then execute
Now you see your material number, the new unit and the material description
click the icon for field selection and add the field nominator and denominator (and all other fields where you usually enter data) to your shown fields.
enter the value of your choice and save.
if you want add the same value for nominator and denominator to all the materials listed, then enter the value in the fields that are listed above the listed materials. then click the header title above all fields that shall be distributed followed by the mass change button. Finally press save button.

Translation using foreign currency units per dollar

We are currently using the built-in HFM translation mechanism for most of our accounts, i.e., we enter currency rates in dollars per foreign currency unit for both a balance sheet rates and a P&L rate and allow HFM to translate. Is it possible to use the default translation to translate using inverted rates, i.e., foreign currency units per dollar? This would imply, of course, that the rate would be divided into the entity currency amount instead of multiplied.
I realize that we could do this via translation rules for all of those accounts, but I'd prefer to use the default mechanism, if possible.

Sofia,
I don't recall the reason for having exhange rates use different options in the intercompany transaction module (ICT). I was part of the team which designed this module back in 2004/2005, and I suspect this was simply a request by someone at the time to allow exchange rates used in matching intercompany transaction matching to be entered either as a divide or as a multiply. This feature applies only to IC transactions, and has no effect at all on the core functionality of HFM, which uses only a multiply approach. Once intercompanty transactions are matched within the ICT module, the remaining, umatched balances each period are posted to the relevent HFM accounts. In many ways this is like using line item details for intercompany balances, but better since HFM can match at the "line item" level.
To be very clear:
1) ICT: intercompany transaction module. This is a module within HFM that allows invoice/transaction level records to be loaded into HFM and matched based on a series of flexible criteria. This is covered in detail in Chapter 13 of the HFM Administrator Guide.
2) ICP: intercompany partner. This is a dimension within HFM that leverages the Entity dimension, where period end balances for/from each entity's partner is loaded into HFM. Intercompany eliminations are performed according to either HFM's default rules, if you use Consolidation Rules = "N" or "R", or according to your own rules if Consolidation Rules = "Y" and you have provided your own Sub Consolidate routine.
The ICT module, though feature rich, is not widely used. On the other hand the ICP dimension is used in a majority of HFM applications worldwide.
I hope this helps clarify the questions.
--Chris

No transfer of Unit of Measure using L_TO_CREATE_DN.

Hi everybody,
I have the following problem: when I create a TO using LT03, I can enter a unit of measure like PLG for example. When the TO is created, SAP determines that it is in fact 20 COLL (1 PLG <-> 20 COLL), determines the correct batches etc etc and creates the TO. When I look at the TO I can see that I entered 1 PLG.
Now we are getting to the problem: when I try to create the TO with fm L_to_create_dn, I can enter the 1 PLG like mentioned before in structure it_delit (anfme and altme), but, the final TO that is created, only contains the recalculated amount of 20 COLL. I can't find the fact that I entered 1 PLG!
Why this kind of behaviour when I use the fm?
The funcional consultants can't find it in customizing.
Any hints or tips?
Cheers and thanks!
Laurens

The problem with using an isolated FM like this is that you don't know if there are FMs that should run before or after it to do other processing. If you look at BAPI_WHSE_TO_CREATE_STOCK, I think you'll see what I mean. A comment in this BAPI says not to use it, so please don't. I think your options are BDC or call transaction.
Rob

Regarding Updating Unit of Measure using Recording

Hi all,
I have a requirement where I need to update the Unit of Measure values in the transaction MM02 using recording procedure.
But I am getting problem with table control, if we have more than 11 values we need to use page down which is not working in recording.
Can anyone please suggest me how to resolve this issue???
Regards
Haritha

Hi Haritha,
do like this(this example is just for your reference)
    IF lv_line > '11'.
      PERFORM bdc_dynpro      USING 'SAPLCOIH' '3000'.
      PERFORM bdc_field       USING 'BDC_OKCODE'
                                    '=P+'.
      PERFORM bdc_dynpro      USING 'SAPLCOIH' '3000'.
      PERFORM bdc_field       USING 'BDC_OKCODE'
                                    '=ENT1'.
      PERFORM bdc_field       USING 'BDC_CURSOR'
                                    'RESBD-VORNR(02)'.
      lv_line = '02'.
    ENDIF.
<b>Reward points for helpful answers</b>
Satish

Unit of measure translation using CUNI

Similar Messages

Maybe you are looking for