Unit of Measurement - Client level Manteinance

Hello experts,
I pls need your help regarding Unit of measurement manteinance.
Is there any way to mantain CUNI transaction in a client level?  I specifically need to mantain at that level the 'Control Parameters', maybe there could be a way to modify at a client level table T006 ( fields that need to be modified would be T006-KZKEH and T006-KZWOB ).
I would really appreciate your help!!!
Kind Regards.
Andres.

Hi,
if you already assigned unit of measure 'SU' to materials and done some transaction. now when you move changed transport to production system will not allow transaction for those material and give you an error.
in this case you need to change the unit of measure from the materials, but that is possible in following condition.
If there are no stocks of the material in the current period and in the previous period
If no purchase requisitions, purchase orders, or scheduling agreements exist for the material
that means no open transaction for that material.
hope this will help you

Similar Messages

  • Maintain different unit of measure at operation level

    HI
    I am working on a scenario where I have to maintain product in different units after each operation for a material. like i am working on SFG to get FG in 3 steps. my base unit of measure is lb. I maintain my product after 1st operation in lb, after 2nd operation in PC, and after 3rd operation again in PC. but weight of Piece after II & III operation are not same. how can i maintain relation between PC & lb at operation level. is it possible?
    regards
    Rajesh

    Hi,
    1. Routing can be created for one header unit of measure only
    2. But in the routing we can have different "Operation Unit"
    3. In the routing in the operation details  there is a unit of measure conversion details
    1 header unit = 1 operation unit
    4. In your case you need to maintain this which can solve your problem.
    Kindly let me know if this is useful or if it doesnt work we can find alternate solution for the same.
    thanks

  • Change base unit of measure

    Hi,
    Its me again. I need to change the base unit of measure of a material but a task listw as created via QP01. I tried to delete this via QP02 but i still cannot change the base unit of measure. Is there any way except for deleting the task list via CA98?
    Thanks.
    Elen

    Ellen,
    Unfortunately the answer to your question is no..You have to use a transaction like CA98 or QSR6 to delete the Inspection plan from Database. Please take necessary authorisation and delete this plan.
    Alternately set this material to with deletion flag and client & plant level status, so that you cannnot use this material any longer. Now create a new material with correct Base unit of measure and use this material.
    Regards,
    Prasobh

  • Multiple Unit of Measure in SAP BO

    We have a requirement to use multiple unit of measures from one of our client whose business concern is manufacturing and tenneries.
    We want to measure inventory in units and in meters at same time. For example, if one new unit measuring 50 metres is received in warehouse then it should be measured in units as well as in metres. If the last quantity in warehouse was 50 pcs with 600 metres then after the one unit addition it should update the inventory to 51 pcs with 650 metres.
    Is there a solution or way we can use SAP BO with multiple UOM.

    Hi,
    In B1 8.8, you can use multiple unit of measure but it will be displayed in the sales marketing document and purchase document.
    The stock UOM can't be managed by multiple UOM.
    When you see field UOM in the item master data --> inventory tab, you can only enter one UOM there.
    In the document level, you can maintain multiple UOM for the item or inventory. If you have defined the conversion of the UOM, it will be automatically calculated.
    Rgds,
    JImM

  • Alternative units of measure are inconsistent; correct the values in SMW01

    Hi,
    when material replication process is happening we came across an error in SMW01.It shows
    Alternative units of measure are inconsistent; correct the values
    Message no. COM_PRODUCT_UNIT014
    Consider the below example
    we have maintained a material from KG to MM which is not a standard SAP conversion but client requires this conversion as
    Tubes (Steel) are mainly ordered in M (Meters) but invoiced by the supplier in KG. Then used in production in KG again. In that case we need a conversion M <-> KG.
    This is very common practice even in indirect material (e.g. Oil, you order barrels, tu vendor invoices KG and you handle Liters in your stock
    can anyone guide me if there is any BADI or SAP note available for this error.
    regards
    subbu

    Hi,
    I have gone through that note it says that the corrections has to be done at BBPCRM component level but i have gone through the system component version i did not find CRM
    so how can we apply the note?
    regards
    subbu

  • Unit of measure issue in Product Category Units Quota Planning

    Hi experts,
    My client needs to maintain quota for salespersons based on R/3 product hierarchy level. (1000 kg of Product Hierarchy Level 01234 per month, 2000 KG of Product Hierarchy Level 56789 per month, vs.). R3PRODHIER is the category assigned to Sales application.
    So in Quota Planning, sub-assignment block Product Category Units, I want to maintain quotas. I press Add button, mark the Hierarchy level I'd like to plan quota to, and press Choose button, but "Unit of Measure" field does not fill up. Surprisingly, in the dropdown list, there is not an option which I can select (i.e. 'KG'). The list is empty, even after I fill Q1, Q2, Q3 and Q4 values. So, I am not able to use the quota planning functionality.
    Any ideas why this is happening and how to fix it?
    Thanks for your time,

    Hi Kivanc,
    I see exactly one year ago (almost to the minute) you posted this solution.
    I am having exactly the same issue as you had. I also assumed the problem lay in ECC with unit of measure having to be defined at that same level.
    I have asked our SD team about this and they are not maintaining units of measure at higher levels of the hierarchy, only on the product itself.
    Our units of measure will be EA, TO, KG
    So how do I get around this? I don't completely understand what you have explained in your solution.
    Regards,
    Kendal

  • Purchase requisition unit of measure  AU ( Activity unit) (Service PR)

    Hi!!Group Members!!
    When i create Service Purchase requisition from T code ME51N - Create
    I select k as account assignment category & D as item category system by default shows AU as unit of measure system does not allow me to change
    When i adopt the PR to PO same AU will be in gray & system does not allow me to change 
    Print out will be in days as service master & data for service is entered in days
    Pleas give your valuable inputu2019s so that I can solve my query
    Regards
    Shamulheq

    Hi11 Roy Anamika  
    Thank you
    I checked below configration screen in my system  & has Unit of measure at item level AU
    SPRO -- MM -- External Services Management -- Source Determination and Default Values and chage the UOM at client level or purchasing org level
    I dont want to change as it is defined @ client level, insted of changing here can i  come to know the fild which had become supress ( gray ) in PR & PO 
    regards

  • Activating batch-specific material unit of measure

    Hi all,
    my client has a SAP ECC 5.0 system with over 30 plants, which are currently using batch management. For a new plant we have the need to work with the batch-specific material unit of measure to have KG as base UOM and to calculate the quantity of bags regarding the batch specific conversion factor.
    Does anybody now which impact will follow on the current batch management and stock in the other plants after activating the batch-specific material unit of measure in the Customizing?
    Thanks in advance,
    Robert

    Hey all,
    I found something in standard SAP... You can use a dependency on the level of the batch class and in there it is possible to write some calculation code.
    Thanks for the input,
    Philippe

  • Assign a Position in CRM to an Organization Unit at a higher level.

    Hi,
    While configuring the Organizational Management in CRM 5.1, I have copied the sales areas created in ECC to CRM.
    The resulting structure is a freely definable Org Unit at the top level called Sales Area (as is was created in ECC) and under that all the Sales Organizations are existing.
    I need to create positions for the Sales Organizations and assign employees to these positions created.
    As per our client requirement, I need to create the positions at the higher level (probably the Org unit level) and assign the employees to these positions created.
    The reason for doing this is that the same employees work across different Sales Orgs.
    Is it possible to create the positions at the highest level so that they can be inherited by the Sales Orgs defined below or do i need to create the positions and the employees separately for each Sales Org.
    I would appreciate if you could answer at the earliest. I need to complete the configuration at the earliest.
    warm regards,
    Rohan Bhate

    Hello,
    Try this SAP CRM: Webclient UI - Framework for this kind of question.
    Regards,
    Fred

  • Unit of Measure in a Flat File

    Hi,
    I have mapped the following in transformations:
    MEINH (Unit of Measure) & MEGBTR (Total Quantity) -
    > 0QUANTITY
    Now i need to load a flat file into that Cube. The Flat file is populated with quantity under 0QUANTITY. How do i bring in the unit of measure in this case (since i did not map MEINH to 0BASE_UOM but rather 0QUANTITY)?
    Thanks

    Hi,
         I t will not be a problem but any way u r defining two fields at datasource level so up to that (means psa ) the data will come as two fields ,now from psa to target u r transformations will occer here both the qty and unit u r assing to quantity so at report level(or target level) the data will be along with it s unit.
    Thanks & Regards
    sathish

  • Round off problem in unit of measurement

    Dear Experts
    We are in SAP 4.7 , we are having more than 12 plants using same client.
    One of our plant requirement we were changed the UOM 'Nos' with 3 decimels allowed.So where ever we not useing decimel places we have to use UOM as 'EA' (each).This is dont have any decimel places.
    Now we are in implementation project for our one more new plant in same client. But for them we are going to introduced Batch specific unit of measurement. Base unit of measurement is KG and Batch specific UOM is EA.
    All sale material have both unit of measurement , inward or production posting in KG and we will create batch number. We will enter the coversion value of how many quantity per kg for each batch.This will be in 'EA'
    While i'm doing transfer posting or consumption or sales for the material in UOM 'EA' , it is coming with 3 decimel places.
    If the same UOM 'EA' in normal condition (without batch specific UOM) it is working correctly.It is getting roundoff correctly.
    Please help me out on this.I need the consumption should not be decimel places for UOM 'EA'.
    Suresh

    Hi Senthilkumar SD,
    You have not read the thread before posting.
    It quite clearly states that the UOM EA already has NO DECIMAL PLACES.
    Quote "<b>we have to use UOM as 'EA' (each).This is dont have any decimel places."</b>
    It is good to see lots of people trying to help and so I am pleased to see you trying, but it really doesn't help if you haven't read the question before posting the answer.
    Steve B

  • Unit is measurement..in CO-PA

    Hi Experts,
    I have one confusion....
    In Material master for one material i have base unit of measurement is "EA", In dimension i have KG/LT/GAL...like different kind of unit of measurements is there...In generally in T.code KE4U i have assigned Value field for QTy update....
    in KE4M also i have assigned  FKIMG---one QTY value field(xxxxx) and FKLMG----one valuve field(xxxx), but client want the sales qty in KE30 report.....based on Actual Qty sold during month........he dont want EA, he want based on the Dimension maintained in Material master..
    I have bit confusion here....please some one explain this ......
    Thanks
    Chandu

    Hi
    What unit is the sales made in? EA or KG?
    You have already mapped FKIMG to VF.. So, if billing happens in KG, it will update in KG
    Another option (If Billing happens in EA) - Then you can use KE4MS to mainain addnl UoM for COPA purposes
    br, Ajay M

  • Material Ledger Unit Of Measurement different from Material Master

    Dear Team,
    In my client, there is a difference between unit visible in CKM3N and MM03. The base unit of measurement in MM03 is MT. Other than that, there are some other units maintained (not M3) in additional data tab in material master. In CKM3N, the visible unit is M3. M3 is not present anywhere in MM03.
    Why would such unit flow in material ledger table? (CKMLPP has unit M3). Please advise.
    One more observation is that when there is some price change document in Material Ledger, the proper UoM (MT) is being captured. Only in the basic price determination structure visible unit for each head is M3. Please check the attached screen shot.
    Any help would be appreciated.
    Thanks.
    Jay Shah.

    Hi..
    Refer to Data Inconsistency of BUOM in Material Ledger Tables

  • Change for Unit of measure in condition master

    Hi, gurus..
    I want to know this is SAP error or not..
    I created condition for material H20.
    H20     70500 usd  per 1 SET
    and edited the unit of measure in addtion of material master record.
    1 EA - 1EA
    1 SET - 6 EA
    then I create SO in VA01 with line item
    H20   1EA   ...
    but condition record showed me a wrong value..
    H20    11774  usd  per 1EA...
    70500 / 6  = 11750  usd..Why  11774...??
    So, I changed the condition for more test..
    H20  11750 usd per 1EA...
    After input line item in VA01.
    H20  1 Set...
    then condition was 70500 usd per 1 SET ..Right result..
    I tried it on other system ( Best Practices 1606) once more  but result was same.
    This is SAP ERROR ??? or not..
    Plz..give me your ideas..

    Dear Kim,
    this error will come due to conversion factor at sales order level .kindly check in the item level how the conversion factor will take the system and also try to change the Quantity and check once again. this will come rare case , if you want to check the conversion error ,debug at the sales order level . for your reference I am attachment the conversion factor path .
    Regards,

  • How can i change unit of measurement in sales order on header

    Dear all,
    I have material master with base unit of measurement " Ea ".
    I have to take unit Pc in sales order.
    how can i change unit on header in sales order.
    i changed unit on line item in sales order by setting in sales unit field in material master.

    Hi,
    You can very well do it, please do the following steps,
    Go to material master and select the Sales Org.1 and 2, here maintain the sales unit PC and
    it will ask you for the conversion, so maintain your conversion for PC to EA. Then maintain
    the Division, delivery plant, material pricing group and account assignment group(if not maintained) and save it
    Now create the sales order for that resp. material, you will find that system will pick up
    the sales unit which is maintained in the material master's sales orgnization tab.
    For this you need not to change at the header level of sales order
    Please check and revert.
    Thanks,
    Hrishi

Maybe you are looking for