Unit Of Measurement Greater Than 3 Characters

How can I create Unit Of Measurement greater than 3 Characters.

the 2 characters for UOM are for identification & you can maintain the Description..
and based on the Description you can choose the UOM..
Did you know the impact of incrteasing the UOM from 2 character to 3 Character..
the UOM has to be stored in many tables, and think of the Space in tables for Transactional data..

Similar Messages

I have a manual that contains headings and index entries that contain less than and greater than characters, and . The Publish to Responsive HTML5 function escapes these correctly in the main body of the text but does not work correctly in either the C

I have a manual that contains headings and index entries that contain less than and greater than characters, < and >. The Publish to Responsive HTML5 function escapes these correctly in the main body of the text but does not work correctly in either the Contents or the Index of the generated HTML. In the Contents the words are completely missing and in the index entries the '\' characters that are required in the markers remain in the entry but the leading less than symbol and the first character of the word is deleted; hence what should appear as <dataseries> appears as \ataseries\>. I believe this is a FMv12 bug. Has anyone else experienced this? Is the FM team aware and working on a fix. Any suggestions for a workaround?

The Index issue is more complicated since in order to get the < and > into the index requires the entry itself to be escaped. So, in order to index '<x2settings>' you have to key '\<x2settings\>'. Looking at the generated index entry in the .js file we see '<key name=\"\\2settings\\>\">. This is a bit of a mess and produces an index entry of '\2settings\>'. This ought to be '<key name=\"&lt;x2settings&gt;\" >'. I have tested this fix and it works - but the worst of it is that the first character of the index entry has been stripped out. Consequently I cannot fix this with a few global changes - and I have a lot of index entries of this type. I'm looking forward to a response to this since I cannot publish this document in its current state.

Unit Testing - Results greater than 0

I am unit testing a PL/SQL function. The function has no inputs and one output (Interval Day to Second) . The output is the time it takes to run a query therefore a valid value for the output would be greater than 0.
When I setup the test the result only takes a Interval Day to Second value. I want to be able to say any result greater than 0 is a success.
How can I do this?
tom

I am unit testing a PL/SQL function. The function has no inputs and one output (Interval Day to Second) . The output is the time it takes to run a query therefore a valid value for the output would be greater than 0.
When I setup the test the result only takes a Interval Day to Second value. I want to be able to say any result greater than 0 is a success.
How can I do this?
tom

Units of Measures found in the material master.

Hi,
What is significance of different Units of Measures found in the material master.
Ajay

Hi,
Order unit
Unit of measure in which a material is ordered. It is the default unit in purchasing functions.
Order price unit
Unit in which the vendor invoices you. The order price unit is defined in the purchase order or in the purchasing info record. If you have defined an order price unit in the PO, the goods receipt will be recorded in both the order unit and the order price unit.
Sales unit
Unit of measure in which a material is sold. It automatically appears as the default in a sales order and can be changed there.
Unit of issue
Unit of measure in which a material is issued from the warehouse/stores. You can use this unit of measure in conjunction with goods issues and physical inventory activities.
Any quantities that you specify in a unit of measure other than the base unit are automatically converted into the base unit by the system. To make this possible, you must enter the ratio for conversions between alternative units and the base unit (the conversion factor) in the material master record. You can enter this information when specifying the alternative unit of measure
Regards,
Santosh

Unit of Measurment

Hello
Can any one help me to understand the meaning/significance of diffrenet Units of Measures found in the material master
regards
Narendra

Hi,
Alternative Units of Measure
In addition to the base unit of measure, used by the system in managing stocks and carrying out all its computations, other departments can use their own units of measure.
All units of measure other than the base unit are known as alternative units. The following are examples of alternative units of measure:
Order unit
Unit of measure in which a material is ordered. It is the default unit in purchasing functions.
Order price unit
Unit in which the vendor invoices you. The order price unit is defined in the purchase order or in the purchasing info record. If you have defined an order price unit in the PO, the goods receipt will be recorded in both the order unit and the order price unit.
Sales unit
Unit of measure in which a material is sold. It automatically appears as the default in a sales order and can be changed there.
Unit of issue
Unit of measure in which a material is issued from the warehouse/stores. You can use this unit of measure in conjunction with goods issues and physical inventory activities.
Any quantities that you specify in a unit of measure other than the base unit are automatically converted into the base unit by the system. To make this possible, you must enter the ratio for conversions between alternative units and the base unit (the conversion factor) in the material master record. You can enter this information when specifying the alternative unit of measure.
Variable Units of Measure
In the material master record, you can specify that the material can be procured in a unit of measure that differs from the order unit.
If the material can be ordered in more than one unit of measure, enter 1 in the Variable order unit field.
This setting is then adopted in the purchasing info record and allows you to enter an order unit that differs from the one in the purchasing info record when creating or maintaining a purchase order or source list.
If you do not allow a variable order unit in the material master record, you must use the order unit from the material master record.
If you wish to specify a different order unit for a purchase requisition, you must assign a source with a different order unit to the requisition.
Regards,
Chinna

Additional/suplimentary unit of measure for Intrastat

Hi!
I am trying to generate the Intrastat declaration.
I have a problem; i am using an commodity code with suplimentary unit of measure p/st. But I cannot define the unit of measure p/st in SAP because the maximum lenght for unit of measure is three characters.
There should be a table BNADDM in SAP where suplimentary unit of measure exists. But this table in empty im my system.
How can I configure unit of measure p/st in SAP in order to add it to commodity code configuration?
Thanks,
Marcel

found in Romania_Intrastat_docuE.doc which is attached to OSS note 1016386 - Intrastat for Romania
Customizing for the Electronic format
Please note following customizing related to the conversion of the Supplementary Unit of Measure has been involved.
The issue: The information about unit measure in SAP is maintained with majuscule (capital letters) and in external system (INS) no (e.g. M3 in SAP and in INS it is m3.)
The customizing is to setup the correct INS supplementary units of measure. Once you need to convert any UoM supplied with SAP application, fill the external system (INS) Unit of measure via the maintenance view:
/CEECV/ROLO_UO_V via transaction sm30.

Greater than 4000 characters in OBIEE 11g

Dear all,
I have a table, just one column.
In Analysis, I designed a table with this column content the data as text greater than 4000 characters.
Can I show all of them in OBIEE ?
Can I change the column datatype?
Anyone help me to resolve this issue.
Thanks and Regards,
David,...

I guess you will have problem displying them in OBIEE since (The data type would be long);
You can not use long datatype column in below cases;
1. A value of datatype LONG was used in a function or in a DISTINCT, WHERE, CONNECT BY, GROUP BY, or ORDER BY clause. A LONG value can only be used in a SELECT clause
2. It can not be used in expressions or conditions
3. It can not be used in select lists of subqueries or queries combined by set operators
Make sure your generated query is not doing the above things. First thing Distinct will come in the obiee queries by default. Try to avoid distinct,group by,order by in your reports. Direct database request for the report can help you in this case.
Mark Correct if it helps.
Regards,
Kashi

Any way to create tablespace with name greater than 30 characters ?

Is there any way to create tablespace greater than 30 characters on solaris 10 and Oracle 10g. Any way ? because i have no other option.

desc dba_tablespaces
So clearly the answer is NO.
Tablespace names are invisible and irrelevant. Why the question?

How do you show usernames greater than 8 characters in /usr/ucb/ps ?

Help!
I am trying to write a process kill script, or rather, modify our linux ones for solaris. The problem is a catch-22 :
a) the string I need to grep for is hidden way up the
command string hence I cannot use 'ps', I need to
use /usr/ucb/ps -auxww .
b) some usernames are greater than 8 characters...
Now this is fine with ps -U command, as this will
correctly match a 9-character username. However
/usr/ucb/ps does not seem to have this option; you
can provide an extra option to get user info to display
in the output under a column heading however this
username is truncated at 8 characers. The
standard username field in both versions of the
ps command is truncated at 8 characters.
how do I grep for my deeply-hidden string and a
9-digin username ?
is there any way to do this in a single command?
I can maybe script this, do a ps -U on the user,
awk the PID out the results, use /usr/ucb/ps and
grep on the PID and the user string ... wondered
if I've missed an option and this can be done by
a single command rather than a script ?
thanks!

Help!
I am trying to write a process kill script, or rather, modify our linux ones for solaris. The problem is a catch-22 :
a) the string I need to grep for is hidden way up the
command string hence I cannot use 'ps', I need to
use /usr/ucb/ps -auxww .
b) some usernames are greater than 8 characters...
Now this is fine with ps -U command, as this will
correctly match a 9-character username. However
/usr/ucb/ps does not seem to have this option; you
can provide an extra option to get user info to display
in the output under a column heading however this
username is truncated at 8 characers. The
standard username field in both versions of the
ps command is truncated at 8 characters.
how do I grep for my deeply-hidden string and a
9-digin username ?
is there any way to do this in a single command?
I can maybe script this, do a ps -U on the user,
awk the PID out the results, use /usr/ucb/ps and
grep on the PID and the user string ... wondered
if I've missed an option and this can be done by
a single command rather than a script ?
thanks!

Trying To Insert XML String Greater Than 4000 Characters in PHP Fails

Dear Sir,
Subject:-Trying To Insert XML String Greater Than 4000 Characters in PHP Fails ORA-01704.
In an attempt to design web app in PHP and inserting data into "CLOB" field of "articles" table associated with it, returning ORA-01704: string literal too long error.
Platform: OEL5
Database 11g(11.0.7.0)
php : 5.2
I refer to oracle document ID: [ID 336888.1] it is asking to contact support.
Please help us in this regards.
Many Thanks,
mkyazdani

Hi,
I appreciate you, yes it is similar i have referred that manual and also inform to our php developer about the changes we need to make in our php script.
Regards,
mkyazdani

Count statement for fields greater than 10 characters

Hi,
I am trying to write a query to select results from a database table where the results are only fields greater than 10 characters in length.
e.g.
Table
Employee----
Andrew
Jennifer Smith
Jamal
the query would only show the result Jennifer Smith because this field exceeds 10 characters in length.
Any help is appreciated....

Have you tried coding anything yet for this homework assignment?
HINT: Use the LENGTH() function.

SAP HR: Cluster Key greater than 40 characters

Hi All,
I have a requirement where I need to store data in cluster PCL4 under a new RELID. The key length for this cluster data is coming out to be greater than 40 characters whereas the length of key field SRTFD is 40. Is there any way I can store data in cluster with key greater than 40 characters??
Thanks for your help in advance.
Thanks and Regards,
JP

Hi,
I don't think you can do it without modifying the field..
It may not be adivsable to change it too as all the four clusters PCL1,2,3 & 4 have an identical structure.. and depending on the cluster, the structure of PCLn-SRTFD is defined in a field string xx-KEY, which is defined in an include RPCnxxy0.
Regards,
Suresh Datti

Conversion Problem in Unit of measure 1PAC=100,000 EA

Hi Experts,
I am facing the problem in conversion of Unit of Measures.
If some material has the conversion unit when we order to Vendor.
The Unit of measure is EA, the Order unit is PAC.
The conversion is 1PAC=100,000 EA
But the System is allowing as 1PAC=10,000 EA only and it is not allowing to enter 100,000 EA and throughing the error
Entry too long (enter in the format __,___)
Message no. 00089
How can we increase the characters of the Unit of measure. Like this we have some 50 Materials, I need to increase the length of the conversion spaces. How to do it, Please guide me.
rgds
Swamy

Hi
you can check this out the denominator factor is Stored in structure - SMEINH - field UMREN.
Best option is to maintain decimal place for the UOM , which is more easier to mainatin.
Even if you go through the note the same is explained. Please read below for Too large numerators and denominators
When 120000 CM3 = 0,2 tons (TO), you can no longer save numerator and denominator of conversion ratio 600000 CM3 = 1 TO as numerator and denominator may have maximally five digits.
Here, you must either select a larger volume unit or a smaller unit of weight: With DM3 the conversion ratio would be 600 DM3 = 1 TO, with KG the conversion ratio would be 600 CM3 = 1 KG.
Generally, the alternative units of measure and the base unit of measure should result in quantities that are in the same dimension since the conversion factors may not be larger than 99999/1 and not smaller than 1/99999.
Thanks & Regards
KK
Edited by: Kishore Kumar Chiluka on Apr 22, 2008 8:25 AM

Error while defining alt unit of measurement in material master

All SAP gurus,
i am trying to define a alt unit of measurement in a finished material, the base unit of measurement is in MT, and the sales unit is nos. the conversion formula is 53 nos = 1kg i.e. 1MT = 53000 nos. as conversion can be done only with base unit of measurement i am giving 53000 nos = 1 MT, but system unable to calculate the conversion as it is not taking mere than 3 digit after decimal.
e.g. if 53000 nos = 1 MT
then 1 nos should be = 0.000018 MT
but system not taking this value as this value contain 6 digit after decimal
suggest me what can be the way out? with detailed steps. can i increase the post decimal value or i have to define another middle alt unit of measurement (like KG). and if that is to be done then how.
Regards
BKR

Hi,
With help of Basis team check the decimal places for u r user ID.
In t-code SU01 >>> Under Default tab
Kapil

FileUpload using JAX-WS webservice on weblogic 10.3.5 is taking long time for files greater than 10MB

I am trying to upload a file using JAX-WS webservice which is deployed on the weblogic 10.3.5 server.Even before the code reaches the Service Endpoint lot of time is being spent at the weblogic layer. for files less than 10MB the performance is good but for files greater than 10 MB it takes around 3 mins to complete the request. I did take thread dumps and I see the thread servicing the requests is taking lot of time when executing SAX2DOMEx.characters it consumes around 80 -85 % of time here. Is there anything that I can do to improve the performance here ?
"[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'" id=37 idx=0x90 tid=16848 prio=5 alive, suspended, native_blocked, daemon
                at jrockit/vm/Allocator.allocLargeObjectOrArray(JIZ)Ljava/lang/Object;(Native Method)
                at jrockit/vm/Allocator.allocObjectOrArray(Allocator.java:349)[optimized]
                at jrockit/vm/StringMaker.toString(StringMaker.java:188)[inlined]
                at com/sun/org/apache/xerces/internal/dom/CharacterDataImpl.appendData(CharacterDataImpl.java:191)[optimized]
                at com/sun/xml/bind/marshaller/SAX2DOMEx.characters(SAX2DOMEx.java:218)[inlined]
                at com/sun/xml/bind/marshaller/SAX2DOMEx.characters(SAX2DOMEx.java:209)[optimized]
                at com/sun/xml/ws/message/SAX2DOMWriterEx.writeCharacters( .java:108)
                at com/sun/xml/ws/util/xml/XMLStreamReaderToXMLStreamWriter.handleCharacters(XMLStreamReaderToXMLStreamWriter.java:153)
                at com/sun/xml/ws/util/xml/XMLStreamReaderToXMLStreamWriter.bridge(XMLStreamReaderToXMLStreamWriter.java:114)
                at com/sun/xml/ws/message/stream/StreamMessage.writePayloadTo(StreamMessage.java:313)
                at com/sun/xml/ws/message/stream/StreamMessage.writeEnvelope(StreamMessage.java:343)
                at com/sun/xml/ws/message/stream/StreamMessage.writeTo(StreamMessage.java:321)
                at com/sun/xml/ws/message/AbstractMessageImpl.readAsSOAPMessage(AbstractMessageImpl.java:226)
                at com/sun/xml/ws/handler/SOAPMessageContextImpl.getMessage(SOAPMessageContextImpl.java:87)
                at weblogic/wsee/jaxws/framework/jaxrpc/SOAPMessageContext.getMessage(SOAPMessageContext.java:252)
                at weblogic/wsee/security/wssp/handlers/WssHandler.getSecurityContext(WssHandler.java:318)
                at weblogic/wsee/security/wssp/handlers/WssHandler.preValidate(WssHandler.java:420)
                at weblogic/wsee/security/wssp/handlers/PreWssServerPolicyHandler.processRequest(PreWssServerPolicyHandler.java:25)
                at weblogic/wsee/security/wssp/handlers/WssHandler.handleRequest(WssHandler.java:112)
                at weblogic/wsee/jaxws/framework/jaxrpc/TubeFactory$JAXRPCTube.processRequest(TubeFactory.java:222)
                at com/sun/xml/ws/api/pipe/Fiber.__doRun(Fiber.java:866)
                at com/sun/xml/ws/api/pipe/Fiber._doRun(Fiber.java:815)
                at com/sun/xml/ws/api/pipe/Fiber.doRun(Fiber.java:778)
                at com/sun/xml/ws/api/pipe/Fiber.runSync(Fiber.java:680)
                ^-- Holding lock: com/sun/xml/ws/api/pipe/Fiber@0x83736a70[biased lock]
                at com/sun/xml/ws/server/WSEndpointImpl$2.process(WSEndpointImpl.java:403)
                at com/sun/xml/ws/transport/http/HttpAdapter$HttpToolkit.handle(HttpAdapter.java:532)
                at com/sun/xml/ws/transport/http/HttpAdapter.handle(HttpAdapter.java:253)
                at com/sun/xml/ws/transport/http/servlet/ServletAdapter.handle(ServletAdapter.java:140)
                at weblogic/wsee/jaxws/WLSServletAdapter.handle(WLSServletAdapter.java:171)
                at weblogic/wsee/jaxws/HttpServletAdapter$AuthorizedInvoke.run(HttpServletAdapter.java:708)
                at weblogic/security/acl/internal/AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
                at weblogic/security/service/SecurityManager.runAs(SecurityManager.java:146)
                at weblogic/wsee/util/ServerSecurityHelper.authenticatedInvoke(ServerSecurityHelper.java:103)
                at weblogic/wsee/jaxws/HttpServletAdapter$3.run(HttpServletAdapter.java:311)
                at weblogic/wsee/jaxws/HttpServletAdapter.post(HttpServletAdapter.java:336)
                at weblogic/wsee/jaxws/VerboseHttpProcessor.post(VerboseHttpProcessor.java:39)
                at weblogic/wsee/jaxws/JAXWSServlet.doRequest(JAXWSServlet.java:98)
                at weblogic/servlet/http/AbstractAsyncServlet.service(AbstractAsyncServlet.java:99)
                at javax/servlet/http/HttpServlet.service(HttpServlet.java:820)
                at weblogic/servlet/internal/StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
                at weblogic/servlet/internal/StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
                at weblogic/servlet/internal/ServletStubImpl.execute(ServletStubImpl.java:300)
                at weblogic/servlet/internal/ServletStubImpl.execute(ServletStubImpl.java:183)
                at weblogic/servlet/internal/WebAppServletContext$ServletInvocationAction.wrapRun(Lweblogic/servlet/internal/ServletStubImpl;Ljavax/servlet/http/HttpServletRequest;Ljavax/servlet/http/HttpServletResponse;)Ljava/lang/Object;(Unknown Source)
                at weblogic/servlet/internal/WebAppServletContext$ServletInvocationAction.run()Ljava/lang/Object;(Unknown Source)
                at weblogic/security/acl/internal/AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
                at weblogic/security/service/SecurityManager.runAs(SecurityManager.java:120)
                at weblogic/servlet/internal/WebAppServletContext.securedExecute(Ljavax/servlet/http/HttpServletRequest;Ljavax/servlet/http/HttpServletResponse;Z)V(Unknown Source)
                at weblogic/servlet/internal/WebAppServletContext.execute(Lweblogic/servlet/internal/ServletRequestImpl;Lweblogic/servlet/internal/ServletResponseImpl;)V(Unknown Source)
                at weblogic/servlet/internal/ServletRequestImpl.run()V(Unknown Source)
                at weblogic/work/ExecuteThread.execute(ExecuteThread.java:209)
                at weblogic/work/ExecuteThread.run(ExecuteThread.java:178)
                at jrockit/vm/RNI.c2java(JJJJJ)V(Native Method)

I am trying to upload a file using JAX-WS webservice which is deployed on the weblogic 10.3.5 server.Even before the code reaches the Service Endpoint lot of time is being spent at the weblogic layer. for files less than 10MB the performance is good but for files greater than 10 MB it takes around 3 mins to complete the request. I did take thread dumps and I see the thread servicing the requests is taking lot of time when executing SAX2DOMEx.characters it consumes around 80 -85 % of time here. Is there anything that I can do to improve the performance here ?
"[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'" id=37 idx=0x90 tid=16848 prio=5 alive, suspended, native_blocked, daemon
                at jrockit/vm/Allocator.allocLargeObjectOrArray(JIZ)Ljava/lang/Object;(Native Method)
                at jrockit/vm/Allocator.allocObjectOrArray(Allocator.java:349)[optimized]
                at jrockit/vm/StringMaker.toString(StringMaker.java:188)[inlined]
                at com/sun/org/apache/xerces/internal/dom/CharacterDataImpl.appendData(CharacterDataImpl.java:191)[optimized]
                at com/sun/xml/bind/marshaller/SAX2DOMEx.characters(SAX2DOMEx.java:218)[inlined]
                at com/sun/xml/bind/marshaller/SAX2DOMEx.characters(SAX2DOMEx.java:209)[optimized]
                at com/sun/xml/ws/message/SAX2DOMWriterEx.writeCharacters( .java:108)
                at com/sun/xml/ws/util/xml/XMLStreamReaderToXMLStreamWriter.handleCharacters(XMLStreamReaderToXMLStreamWriter.java:153)
                at com/sun/xml/ws/util/xml/XMLStreamReaderToXMLStreamWriter.bridge(XMLStreamReaderToXMLStreamWriter.java:114)
                at com/sun/xml/ws/message/stream/StreamMessage.writePayloadTo(StreamMessage.java:313)
                at com/sun/xml/ws/message/stream/StreamMessage.writeEnvelope(StreamMessage.java:343)
                at com/sun/xml/ws/message/stream/StreamMessage.writeTo(StreamMessage.java:321)
                at com/sun/xml/ws/message/AbstractMessageImpl.readAsSOAPMessage(AbstractMessageImpl.java:226)
                at com/sun/xml/ws/handler/SOAPMessageContextImpl.getMessage(SOAPMessageContextImpl.java:87)
                at weblogic/wsee/jaxws/framework/jaxrpc/SOAPMessageContext.getMessage(SOAPMessageContext.java:252)
                at weblogic/wsee/security/wssp/handlers/WssHandler.getSecurityContext(WssHandler.java:318)
                at weblogic/wsee/security/wssp/handlers/WssHandler.preValidate(WssHandler.java:420)
                at weblogic/wsee/security/wssp/handlers/PreWssServerPolicyHandler.processRequest(PreWssServerPolicyHandler.java:25)
                at weblogic/wsee/security/wssp/handlers/WssHandler.handleRequest(WssHandler.java:112)
                at weblogic/wsee/jaxws/framework/jaxrpc/TubeFactory$JAXRPCTube.processRequest(TubeFactory.java:222)
                at com/sun/xml/ws/api/pipe/Fiber.__doRun(Fiber.java:866)
                at com/sun/xml/ws/api/pipe/Fiber._doRun(Fiber.java:815)
                at com/sun/xml/ws/api/pipe/Fiber.doRun(Fiber.java:778)
                at com/sun/xml/ws/api/pipe/Fiber.runSync(Fiber.java:680)
                ^-- Holding lock: com/sun/xml/ws/api/pipe/Fiber@0x83736a70[biased lock]
                at com/sun/xml/ws/server/WSEndpointImpl$2.process(WSEndpointImpl.java:403)
                at com/sun/xml/ws/transport/http/HttpAdapter$HttpToolkit.handle(HttpAdapter.java:532)
                at com/sun/xml/ws/transport/http/HttpAdapter.handle(HttpAdapter.java:253)
                at com/sun/xml/ws/transport/http/servlet/ServletAdapter.handle(ServletAdapter.java:140)
                at weblogic/wsee/jaxws/WLSServletAdapter.handle(WLSServletAdapter.java:171)
                at weblogic/wsee/jaxws/HttpServletAdapter$AuthorizedInvoke.run(HttpServletAdapter.java:708)
                at weblogic/security/acl/internal/AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
                at weblogic/security/service/SecurityManager.runAs(SecurityManager.java:146)
                at weblogic/wsee/util/ServerSecurityHelper.authenticatedInvoke(ServerSecurityHelper.java:103)
                at weblogic/wsee/jaxws/HttpServletAdapter$3.run(HttpServletAdapter.java:311)
                at weblogic/wsee/jaxws/HttpServletAdapter.post(HttpServletAdapter.java:336)
                at weblogic/wsee/jaxws/VerboseHttpProcessor.post(VerboseHttpProcessor.java:39)
                at weblogic/wsee/jaxws/JAXWSServlet.doRequest(JAXWSServlet.java:98)
                at weblogic/servlet/http/AbstractAsyncServlet.service(AbstractAsyncServlet.java:99)
                at javax/servlet/http/HttpServlet.service(HttpServlet.java:820)
                at weblogic/servlet/internal/StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
                at weblogic/servlet/internal/StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
                at weblogic/servlet/internal/ServletStubImpl.execute(ServletStubImpl.java:300)
                at weblogic/servlet/internal/ServletStubImpl.execute(ServletStubImpl.java:183)
                at weblogic/servlet/internal/WebAppServletContext$ServletInvocationAction.wrapRun(Lweblogic/servlet/internal/ServletStubImpl;Ljavax/servlet/http/HttpServletRequest;Ljavax/servlet/http/HttpServletResponse;)Ljava/lang/Object;(Unknown Source)
                at weblogic/servlet/internal/WebAppServletContext$ServletInvocationAction.run()Ljava/lang/Object;(Unknown Source)
                at weblogic/security/acl/internal/AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
                at weblogic/security/service/SecurityManager.runAs(SecurityManager.java:120)
                at weblogic/servlet/internal/WebAppServletContext.securedExecute(Ljavax/servlet/http/HttpServletRequest;Ljavax/servlet/http/HttpServletResponse;Z)V(Unknown Source)
                at weblogic/servlet/internal/WebAppServletContext.execute(Lweblogic/servlet/internal/ServletRequestImpl;Lweblogic/servlet/internal/ServletResponseImpl;)V(Unknown Source)
                at weblogic/servlet/internal/ServletRequestImpl.run()V(Unknown Source)
                at weblogic/work/ExecuteThread.execute(ExecuteThread.java:209)
                at weblogic/work/ExecuteThread.run(ExecuteThread.java:178)
                at jrockit/vm/RNI.c2java(JJJJJ)V(Native Method)

Unit Of Measurement Greater Than 3 Characters

Similar Messages

Maybe you are looking for