Unit of measurement in project system

Hi Experts,
Its relevant to PS module. Base unit of material is KG whereas sales unit is M2 and conversion is maintained between both. Now I am using sale unit (M2) while entering material componenets in project. Then I am raising PR, PO, GR in project and withdraw the material in sale unit M2. But system updates the report in KG (under purchasing data tab in project). When I get material report, system shows reqmt qty in M2 but received qty in KG. Its confusing and doesn' serve the reporting purpose. Can we do something so that received and withdrawn qty will appear in M2 (sale unit) rather than KG (base unit)?
Regards
Dinesh Chauhan

Hi,
You inventory is maintain always in base unit of measure.
You can maintain different unit in material master like,
Order unit(Purchasing view) : - For Purchase Order
Unit of issue(Plant data1) : - For issue material.
You can see material stock in both unit of measure in MMBE.
After enter material code you can see material stock, by changing material unit of measure you can also saw material stock in specific unit of measure.
Maintain Order unit of measure in purchasing view and also active variable active unit( Enter 1 = active) in purchasing view
Regards,
Mahesh Wagh

Similar Messages

How to maintain different unit of measure in the system

Hi,
I am using a flat file source system in which i am using a 0MATERIAL,0QUANTITY.
Now i need to load conversion factors into 0MAT_UNIT.
how to do this for flat files?
I have to do this to fill master data by right clicking on 0mat_unit and doing maintain master data and when i click on any fiels there like unit of measure and do F4 i am not able to see all the unit of measures like KG,CAN,PC etc...
plz tell me how to do this?
Thanks,
Vijaya

Hi,
Thanks but since i am using a flat file source system and if i right click on the source system i dnt get the option "transfer global settings"...
the solution u have given is for R/3 datasources.
plz give me more inputs regarding this.
Thanks,
Vijaya.

Problem of unit of measurment in production system

Hi Friends,
I'm facing a peculiar problem of unit of measurement like error in all quantity and curreny fields in report output after transporting a query from quality system to production system but this query is generated from multiprovdier. what might be the problem.
Regards,
Srinivas.

Hi Dave,
Thanks for ur reply. but to trace in monitor it is not showing any error message.
My Mail ID is [email protected] Please the send the document
Regards,
bharat

Base unit of measure Box is missing in SAP 4.7

Dear Group members
Base Unit of Measure "Box " is not in my SAP System 4.7
Dear Group Member
I am not finding "Box " Base Unit of Measure in my system
My system is SAP 4.7
You suggestions will be appreciated

Go to CUNI Tcode
and select the existing any UOM which is proximate to Your BOX unit of measure.
and Copy it as and Name it BOX
OR
Creation New Unit of Measure
Use transaction CUNI t create UOM
Here click UOM & then in the next screen click create icon in the top.
Steps,
1: use CUNI tode create Dimension give Dimension text and unit
2: create a IS code
3. in unit of measure option give commercial and technical information
I hope that this will help u for create unit measure

Decimal in Unit of Measure conversion

Hi Gurus,
I want to enter decimals in Unit of Measure conversion. System is giving the error that "Decimal not permitted". Actually the scenario is we have a material with KG as a base unit of measure. The ordering unit is "L" litre and the conversion factor is:
1 Litre = 0.792 KG
But when I am going to enter the conversion the system is not allowing to enter decimal. What I need to do in the configuration to enable the decimal entry.
Earliest response will be highly appreciated.
Thanks

>
Imran Khan wrote:
> I have entered 1000 Litre = 792 Kg, but when I order 1Kg, system is converting it into 12.62 Litres.
>
> Thanks
if 792 kg equal to 1000 ltr,
then 1 kg equals to 1,263 ltr.
when do you see this "conversion" to 12,62 litres? in ME21N after you entered 1 KG?
if yes, then your order unit is probably set to liter, further check if you have a rounding profile in material master or info record, that causes the switch from 1,26 to 12,62

Unit of measure in External requirement

Hi experts
When the requisitions are created in R/3 the unit of measure of the product is Base Unit of Measure and not Order unit, so the requisitions are transfered to SRM with the Base Unit of Measure but the material has in Purchassing an unit diferent unit of measure but the system not takes it in account, how can ensure the POs are created in SRM with the unit of measure of the material master Purchasing vision?
Thanks
Nilson

Hi. I am not sure if there is a better way, but units of measure are stored in SRM in table COMM_PR_UNIT.
You could use the BBP_DOC_CHANGE_BADI method BBP_PO_CHANGE to read the alterante unit and carry out the conversion.
Regards,
Dave.

Unit of Measure for Cases issue

Hello all,
We are working with APO as the source system. In one of extractions we are getting cases information and the unit maintained there is CV. Now when i am trying to load the data into BW it is saying that for CV SID generation problem. When i checked the T006 table there when I give CV in the unit of measurement and display the content it gives me a record with CS. When i check the SPRO setting for unit of measurement, I found there is an entry wherein Unit is CS, Commercial Unit is CV. Now if i want to resolve this issue what is procedure i need to follow.
Regards
Vijay

Try reload units of measure from source system and do correspondin cheks for 0UNIT in RSRV transaction

New Unit of measures & ISO codes

Hello,
We are currently trying to create some new unit of measure in our system which will be used in QM module and are very specific. For this reason, we can't find any corresponding ISO code in our SAP system. SO we have a few question about this point :
1) Could you tell us which UoM is ISO or not among the above list ? For ISO UoM, could you give us the corresponding 3 digits code (field T006I- ISOCODE) we will need to use to create them into our system?
o   AE :                                       Amylogram Equivalent
o   °BX :                                     Brix Degree
o   Cfu/m3:                              Colony Forming Unit per m3
o   IU/kg :                                 International Unit per Kilogram
o   meq/kg :                            Milli Equivalent per Kilogram (WHO-TEQ)
o   µg/100g :                            Microgram per 100 grams
o   mL/100g :                           Milliliter per 100 grams
o   pg WHO-TEQ/g :             Picogram per Gram
o   g/mL :                                  Gram per Milliliter
2) Is it possible to add some new ISO codes in this SAP standard table (T006C)? On your side, do you update the content of this standard table (update of the content of the standard table) and dispatch it to your customer?
3) Do you have a website or SAP transaction referencing the entire official ISO codes you've registered?
In this website link(http://wiki.sdn.sap.com/wiki/display/SI/UnitofMeasurerelatedsettingsinSAP), you are redirecting us to an ISO reference website in part I.2.(http://www.unece.org/etrades/codesindex.htm ) which is not working anymore
Thanks in advance for your help.
Best regards,
Pierre Alauzet

Hi
you can create new UOM but you have to check whather std are available at CUNI.
if it is.. you can create
please go through these links..
http://help.sap.com/saphelp_45b/helpdata/en/c6/f83bb94afa11d182b90000e829fbfe/content.htm
Create Unit of measurement (MM)
Create a new units of measure KG/cm2...
How to create new unit of measurement
You can add Iso codes also.... for that please go through the following link..
How to add an iso code to table t006i
Thanks....

Unit of measure missing for LagDuration in ES for Project Network Activity?

Hello,
I just tried the Enterprise Service "Read Project Activity" (ProjectProcessingManageProjectIn) from ESM ERP 604 in the ES workplace. The field LagDuration in the NetworkRelationship consists of only a number, but no unit of measure. I changed the unit from Hours to Seconds via the Web Portal and watched the results of the Service: the number did not change although one hour should result in different lag time than one second. IMHO the unit of measure is missing in the service definition. Or am I getting something wrong?
Regards,
Uwe.

It is even worse: There are several duration fields in the "Manage Project In" Service Interface (e.g. Activity BaseDuration). In the responses these fields always contain a naked number (no unit of measure). In the WSDL these fields are of type "Duration" which has a pattern restriction of "PnYnMnDTnHnMnS" - not an int type! In a request if you pass e.g. "PT20M" (which is a valid Duration according to the samples) you will get a nasty parse error. Can anybody explain? Has anybody worked around this issue?

Sales Information System (SIS) Reporting- Alternative Units of Measure

Guys,
Does anyone know how can we view SIS Reports (either using Standard or Flexible Analysis) in Alternative Units of Measure? Currently, all the quantities (example Order Quantity) are displayed in Base Unit of Measure .
Thanks a Lot

Hai john ,
If i copy the mc.1 to make -Z report in this how can i view the stock in alternative units as Kgs..But in master datas we maitained as BUM-Nos . For the same material master we are maitaining in additional datas as 1000 nos =40 kgs, if i take the report system will calculate the current stock with the AUM as kgs .for this pls suggest ie have 1000 nos stock if i choose AUM it should shows as 40 Kgs .How to make program for calculating formulas.PLs reply me asap
Thanks in advance
viswa

Activation of Batch Specific Unit of Measure in IS-Retail System

Hi experts,
In our scenario for Articles, Client work with kg, but also want to keep track of the number of pieces.
I am trying to MAP this Process using Batch Specific Unit of Measure functionality in IS-Retail.
Is it Possible to Use the Batch Specific Unit of Measure functionality in IS-Retail System.
In Article Master, I couldnt find any "Classification View" or "Proportion/Product unit" Tab.
Also is it possible to capture the Batch Characteristics through Interface ???
-MSK

dear friend,
just in case look here:
http://help.sap.com/saphelp_47x200/helpdata/EN/97/b7293772b7ce25e10000009b38f839/frameset.htm
good luck!

Unit of Measurement is comming **** in SRM and ecc system

Hi All,
I create new Unit in CUNI and replicated in my system but now if i see all the old PO's in SRM and ECC.....All units of measurement are comming '****' in place of unit of measurement but when i create a new Sc and PO replicated in ECc that vlaue is comming perfectly fine . Please tell me how i can fix this bug.
Regards to all,
Smriti Arora

i check translation it is availabe in english.But how could this happen to all the UOM.......i check in ECC and SRM ie coming ****.
Smriti Arora

Base unit of measure is different from Idoc to purchase order toSAP System.

Hi Gurs,
vendor send a purchase order for confirmation through EDI, the base unit of measure in the Idoc is PA( Parcel). For this same material the unit of measure in R/3 system is PC.( Piece). I got a error on this.I checked in CUNI, In Unit of measurement ST (PC) is already assigned to unit PCE in EDI. But i dont want to change the Conversion.I need this also and I want to create a new conversion ST(PC) is assign to PA( Parcel).
Please help in this.
Is it possible to maitainthe ISO-code PA into table Units of Measurement of Dimension?
Edited by: Vadivel Karalam on Nov 1, 2010 1:13 PM

Hi,
You are getting the error because as part of the std ( For ALE/EDI) the unit of measurement that is maintained is PC whereas if you look at another unit of measure that you have mentioned, the std doesn't define anything under the ALE/EDI setup.
Because of that all the conversions are coming with PC. So pls goto general settings and check unit of measure menu. There for each of your units, there is a section for ALE/EDI, set up the relevant UoM and the issue should get resolved.
Hope it helps.

Units of Measure, Currency Configuration in BI system

Hi Gurus,
We are setting up the new BI Development system....My question is how to Configure 'Units of Measure', 'Currency' RSADMIN, etc.
Gurus Plz let me the procedure to configure these settings!!!
Thanks in Advance
-Lakshmi raj

Hi
You need to maintain the Table T006 for UOM and at TCODE RSUOM.. But normally all the settings are Transferred from Source system by RSA13--SOURCESYSTEM -- Transfer Global Settings / Transfer Exchange Rates.
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/3228ef89-0d01-0010-e9bb-d052aa17b439
Hope it helps
Edited by: Aduri on Jan 22, 2009 4:46 PM

System is not converting unit of measure ment while doing cost estimation.

Hi All,
System is not converting unit of measure ment while doing cost estimation.
Now i am explaining system setting. based on this kindly help me.
Our Base Unit of Measure Measuremnt in Material Master is M2 (meter square) and We have maintained Unit conversion in Master as 1 PC is <=>2.5 M2.
We are running costing for 1 M2.
Producion we are doing in Peaces (PC) . and i maintained Std Value for for Machin and Labour for PC only. and we maintained charge quantity in phases also.
While running cost estimation system is not converting std value of machin & labour into M2.instead it is showing full machin and labour time and value.
System showing PC value for M2 Cost estimate.
Can any one let me know where i am missing.
Thanks in Advance.
Regards,
Sahil

Hi,
as per your explanation: 1 PC (piece) = 2,5 sqm (m2), standard values for "labour / machine" maintained per PC.
I guess within T-code CUNI, the unit PC does not allow any decimal places (means there can be only 1 piece, 2 pieces, 2 pieces but not 1 and a half pieces, 2,63 pieces,...)
Now if you are running plan cost estimate for quantity 1 sqm (m2) SAP picks the "labour / machine" values for 1 PC (and not for 1 / 2,5 = 0,4 pieces) as decimal places for unit pieces are not allowed so its up-rounding.
Run cost estimate for 10 sqm (m2) which should be 4 PC and the result should be fine.
Best regards, Christian

Unit of measurement in project system

Similar Messages

Maybe you are looking for