Unit of the Quantity field is displaying in internal format in Bex report

Hi Experts,
I have a BEx Query, in which i have quantity keyfigure added(Examble - Sales Quantity).
When i run the report for a selection the report displayes the unit for the quantity field in internal format.
Examble - instead of showing 10 CS (case), the report is shwing in 10 CV (internal format of unit CS is CV).
Also when i check the cube content, it has the unit updated into the cube as CS for that keyfigure.
Can any one let us know, how to dispaly the report output in external format.
Regards.
Muruganand.K

Hi Gopi,
The property in question is "calculated". This is a property of a context value attribute. So select the value attribute in the context to which your field is bound and view the properties. Set "calculated=true". It will generate the accessors.
In the setter method, add the following piece of code:
public void set<your attribute name>(IPrivate<your component>View.IContextElement element, java.lang.String value)
DecimalFormat df = new DecimalFormat("#.00");
value = df.format(value).toString();
Regards,
Satyajit
Message was edited by: Satyajit Chakraborty
Message was edited by: Satyajit Chakraborty

Similar Messages

Change of the quantity field to 5 decimal places in SAP

Hi Gurus,
The quantity field is appearing with 3 decimal places in BOM, Process Order, etc. Is it possible to make the decimal places to 5.
All the decimal digits from SAP are 3 digits. We have an interface through which the data flows from another legacy system (Fow system) to SAP. And the Fow system setting was 5 digits. The issue is some of the raw material requirement qty was really minor and it might be below the decimal 3 digits.
In that case, when the data flows to SAP from Fow system it will cause the material stage failure. so please help me to investigate how to let the SAP also could have the 5 digits decimal. Thanks.
Regards
Brijesh

Dear ,
Its SAP standard ,to put and use decimal places in BOM qty .You can use upto 3 decimal places in BOM qty.
At SE11 you need to see what measure field is linked to the quantity field.Then goto tranaction CUNI and chage the decimal places of the unit of measure for the qty field unit , it will not allow you more than 3 decimal places in case of BOM qty.
You have following choice :
1. With the access key make changes in the standard program and take help from ABAPer
SAPLCSDI, Table Name-RC29P, Field Name- MENGE.
2) Change the base quantity in BOM header to 1000 aand accordingly change the component quantity.
Hope this is clear
Regards
JH

Problem with the quantity field

hi every one
i am facing a problem with the quantity field (vbap-kwmeng)
as per my requirement i need to display this quantity field along with some other item fields from VBAP in an alv grid.
among all the fields displayed in the alv grid only this quantity field is editable(end user can change this quantity)
once end user changes this quantity and press save button i need to capture this new quantity in my internaltable.
problem is input of length of quantity is 15 and the output length is 19
so when i am pressing save
say my quantity is 50 when i am pressing save '0.050' is coming because of the length difference
how can i capture the original changed value.
vamsi

what about define two fields in you inner table ,one as char and the other as vbap-kwmeng, you can show the char one in the ALV gird , when user input value and press SAVE ,you can move the value to vbap-kwmeng.
you can test it,mybe some one has one better idea.

In smartforms the quantity field is not showing the perfect value .

In smartforms the quantity field is not showing the perfect value because the point is shifting left
insted of showing 8.10 it is showing 80.00.

Hi,
Dont use the quantity field same as that it come from interface Fm declare one field for quantity in the global settings and write the logic to pass the value to that field and pass that global value to the particular texts...same is the case with currency fields also.
Regards,
Rohan.

Query Alert for a change in value of the Quantity field of the sales order

Hi Experts,
A query alert has been set up to alert the warehouse employee when a new sales order is created by a sales employee. Our client wants the warehouse employee alerted when the sales employee edits the quantity field of an already added sales order.
Kindly assist in designing a query to notify of this change in the Quantity field of the sales order.
David

Try this one:
SELECT T0.DocNum, T0.CardCode, T1.ItemCode, T3.Quantity 'Old Qty', T0.Quantity 'New Qty', MAX(T2.LogInstanc) 'Times Changed'
FROM dbo.ORDR T0
INNER JOIN dbo.RDR1 T1 ON T1.DocEntry = T0.DocEntry
INNER JOIN dbo.ADOC T2 ON T2.DocNum = T0.DocNum AND T2.ObjType = '17'
INNER JOIN dbo.ADO1 T3 ON T3.DocEntry = T2.DocEntry AND T3.ItemCode = T1.ItemCode
WHERE T0.DocStatus = 'O' and T0.DocType = 'I' AND T1.Quantity != T3.Quantity
GROUP BY T0.DocNum, T0.CardCode, T1.ItemCode, T1.Quantity, T3.quantity

Hide the quantity field at goods movements in cofirmation.

HI,
My client is using CO11N for confirmation. and doing auto goods reciept and auto goods issue.
Whn I am clicking on Goods movement in CO11N system is showing me which material is going in goods reciept and which is in Goods issue.
Now my requirement is I want to hide the quantity field of the material in goods movement because some time user is changing the quantity of goods issue.
Wat can I do for the same?
Please sugest
Thanks & Regards,
Nilesh Ithape.

Dear Nilesh,
Try to achieve the same using the authorization control.
You can take the help of the BASIS consultant and try to find the authorization object and the value
which's allowing to change the quantity.
Check whether this is the particular object C_AFKO_AWA is allowing the same(I'm not sure).
After finding out the Authorization object remove the tick mark for the value which's for change or delete.
You can find it using SU24 T code or using SUIM and other related T codes.
If it cant be done even after authorization control ,revert back to the forum.
Regards
Mangalraj.S

Transactions TBB1 TPM44 - the portfolio field is displayed blanked

Hi Gurus.
We are using the portfolio field on our financial transactions created through FTR_CREATE. However, when we analyze the output reports of TPM44, TBB1 transactions the portfolio field is displayed blanked.
Has anyone faced this situation?
Thanks in advance for your help.
Regards,
ZucoGuti.

HI ZucoGuti,
portfolio field in TBB4 and TPM44 is for portfolio used in position determination and will only be displayed, if it is used as differentiation criterium. The same is valid for reports like TPM12 and TPM13.
BR,
Tomislav

I have two fields and I would like the 2nd field to display the word "Error" if the number is smalle

I have two fields and I would like the 2nd field to display the word "Error" if the number is smaller than the number in field 1.
can any one help?

The code for the field? Sure, it's simple.
You can use something like this as its custom calculation code:
var v1 = this.getField("Field 1").valueAsString;
var v2 = this.getField("Field 2").valueAsString;
if (v1 && v2 && Number(v2)<Number(v1)) event.value = "Error";
else event.value = "";
Edit: Fixed code

AP Invoice interfaced to Projects shows the amount in the quantity field

We are noticing that AP Invoices interfaced to Projects show the invoice amount in the quantity field, e.g. in projects quantity and cost both show the invoice amount. The actual quantity is different. Anybody experienced that or has a solution?

Hi User,
This is intended functionality of Oracle projects:
For AP invoices the QUANTITY = ACTUAL AMOUNT (eg 1000) of the AP invoice at the distribution level and UOM = word "CURRENCY".
Incase of labor expenditures the quantity = the number of hours and UOM = HOURS.
Please revert incase more information is required on this issue.
Thanks & Regards,
Neeta

The definitive field order list for all formats

WANTED: The definitive field order list for all formats, NTSC and PAL.
I have seen several such lists, but are they trustworthy?
This one http://www.dvxuser.com/V6/showthread.php?t=125817 looks promising, but, for instance, how can HDTV 1080/24p have a field order of upper field first? - Isn't "p" without any fields?
Anyway, if someone has seen such a definitive list, preferrably from some "official" source, please share.
Thanks

Hi kalione,
We’re always looking for ways to make browsing BestBuy.com easier. With the recent merger of the My Best Buy website into the main BestBuy.com page, it sounds like there may have been some changes to how you can view upcoming games! My apologies if there has been an added element of difficulty here.
The method that zztoluca has explained is actually how I generally check for pre-orders we have listed, as I like looking at them by individual platform. If you start at the main “PRODUCTS” tab at the top of the main site, choose “Video Games, Movies, & Music” and then choose the console of your choice. Once there, there should be an option on the left under the “Games” section for browsing by Pre-orders. Here is an example of pre-orders listed for Xbox One.
I hope this helps! Keep an eye on BestBuy.com as it’s constantly changing and evolving.
Cheers,
Brian|Senior Social Media Specialist | Best Buy® Corporate
Private Message

Displaying the quantity field in decimal values

hi
I have created a web dynpro application,and I am calling BAPI functional module from that webdynpro application.
Now the output is being displayed in the second view by giving the input from the first view.
Now my problem is that the quantity value is being displayed as "5" and whereas It should be "5.00".
Is there any setting to be done from the properties end of that particular table.
Please suggest me in this issue.
thanks and regards
kris

Hi Gopi,
The property in question is "calculated". This is a property of a context value attribute. So select the value attribute in the context to which your field is bound and view the properties. Set "calculated=true". It will generate the accessors.
In the setter method, add the following piece of code:
public void set<your attribute name>(IPrivate<your component>View.IContextElement element, java.lang.String value)
DecimalFormat df = new DecimalFormat("#.00");
value = df.format(value).toString();
Regards,
Satyajit
Message was edited by: Satyajit Chakraborty
Message was edited by: Satyajit Chakraborty

How to truncate the decimals in the ALV report for the quantity field

Hi All,
I have to display a quantity field and units of measure in the ALV output. If the units of measure eq 'PC' i should not display the decimal places for quantity in the alv output, otherwise i have to display the decimals in the output. How to do this....any help would be highly rewarded. I knew that for this type of cases decimal_o will not work.

Hi,
Declare one more Internal table same as output table. In that intead of that quantity field, declare field_name(15) type c.
data temp type i.
Loop at itab.
if field = 'PC'.
temp = qunantity field.
field_name =temp.
else.
field_name = quantity field.
endif.
endif.
endloop.

How do I get the contents of the "note" field to display on the event in day and week modes?

I am a student and I take the reading and exam schedules from my class syllabi and put them in iCal so I only have to go to one place to see what assignments are due.
I put the class name in the event name field, the classroom number in the location field, and the day's assignment in the note field. When I view the week or day I would like the event box to list all three pieces of information but I can only get iCal to display the even name and location.
Does anyone know how to make the note also display?
Thanks

Can you post a screenshot of the timeline? Which type of actions do the buttons (or click boxes?) trigger: simple or advanced or shared actions? Have a look at:
Why choose Standard over Simple action? - Captivate blog
I suspect that your buttons get into their inactive part, where they will not be functional anymore.

Setting Default Value to the Quantity Field in ML81n

Hi Gurus,
I have an assignment to set a default value of 1 to the quantity value when creating entry sheet. This is the process we go through before the point of setting the 1:
1. Go ML81n and click on "Other Purchase Order" input some PO number and click enter.
2. On the Menu --> Entry Sheet --> Create --> Empty Page
3. At the bottom of the screen Click on "Service Sel", and click enter if a pop-up shows
4. Now on the line item, select any row (1 or 2 or many). and Click on Services on top.
So at this point when the new screen shows with the new Entry Sheet number, the line Items that comes up should all have a quantity of 1, and should be editable by the user before saving.
How can i go about this. Which UserExit will do this or Enhancement Point. The screen field for this quantity is ESLL-MENGE.
Thanks guys.
Rewards, will be greatly reward.
Edited by: Basil Balogun on Jul 7, 2008 11:03 PM

Hi,
Pls check out this Exit-
package name ML-
SRVESSR->EXIT_SAPLMLSR_010->Set Entry Sheet Header Data.
For this in importing paramertes
I _EKPO type EKPO in this we have MENGE field try to asign value 1 to this.
First check the screen number of the popup screen for which you need to enter the MENGE valuein GUI status. Chck if this screen exit can be used by puting a break-point.
And also try this screen exit for SRVEUSCR-
EXIT_SAPLMLSR_020-Transfer of Data to Entry Sheet User Screen
EXIT_SAPLMLSR_021-Adoption of Data from Entry Sheet User Screen
SAPLMLSR-Screen exit at 0400 subscreen.
Reward if helpful.
Best Wishes,
Chandralekha
Edited by: Chandralekha on Jul 8, 2008 6:41 AM
Edited by: Chandralekha on Jul 8, 2008 6:43 AM

Problem with the quantity field in bdc?

Hi,
i have to populate a quantity field in bdc .
for ex 123.00. but the bdc accepting only in the form of 123,00.
How can I do this .
I tried by changing the user profile, but went in vain.
Suggest me how to convert ?
Thanks.

Hi,
Create a variable of TYPE CHAR.Write your quantity field value into this variable and pass this variable to the BDC. This is the way of passing quantity fields to BDC.
DATA: V_AMOUNT(22) TYPE C.
WRITE ITAB-DMBTR INTO V_AMOUNT.
Pass this V_AMOUNT to BDC flow.
Hope this helps.
ashish

Unit of the Quantity field is displaying in internal format in Bex report

Similar Messages

Maybe you are looking for