UNIT PRICE - MR21

Dear MM Friends
While I am updating standard price of Finish in MR21 , some Finish are updating and some are roughing a run time error when saving the changes as given bellow
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_ARITHMETIC_OVERFLOW', was not
     caught in
    procedure "MBEW_NEW_PRICE_UNIT" "(FORM)", nor was it propagated by a RAISING
     clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    An overflow was discovered in an ongoing arithmetical operation with
    operands of type P. Possible causes are:
    1. The result field of type P is too small for the result.
    2. The result or a intermediate result has more than 31 decimal places.
What could be the reason
Thanks in advance
Ashok

Hi
Thanks for your reply
Initially it was
     TDAEGN0001     Acetyl SalicylicAcid Tab. 300mg50x1x1000     PITH     47,038.10     11.00     1                   1      S     0.00      INR
than it changed to
     TDAEGN0001     Acetyl SalicylicAcid Tab. 300mg50x1x1000     PITH     55,000.00     2,500.00     5,000     12,000     S     0.00     INR
Now we want to change it to
TDAEGN0001     Acetyl SalicylicAcid Tab. 300mg50x1x1000     PITH     *55,000.00     5,76,600      60,000     12,000*     S     0.00     INR
This is my client requirement ,so please advice me How to make the change
Thanks
Ashok

Similar Messages

GR amount is not matching with PO unit price

Hi folks,
I have created a Purchase Ordre in foreign currency euro with account assignment project. Say the unit price of the item is euro 500/pc. While doing GR for three pcs, it is showing in purchase order history only 9 euros and in local currency column 44.45 saudi riyal as per conversion mention in po.
Why it is not showing 1500euros?
Please reply urgently.
Regards

Hi,
You need to check for following:
1 ) PO HEADER level currency
2 ) Exchange Rate in PO
3 ) Also, check for VENDOR MASTER :: Purchasing Data view for Pricing Date control field
Also for present date check for exchange rate between currencies which is generally maintained by FI

Unit price validation in Purchase Order, Goods Receipt PO and A/R Invoice

Hello!
I want to have validation of the Unit Price field in Purchase Order, Goods Receipt PO and A/R Invoice documents.
This means that user has to get some kind of message if she/he do not enter the Unit price in above mentioned documents.
I can not use the price lists for this, to get the field populated automatically, because I do not have all the prices...
I am no longer newbie when it come to SAP, but this really puzzles me
Thanks,
Dejan

Hello guys,
I have tried to add this code to check if the field Unit Price was empty in the Purchase Order form (Object ID 22)
But it gives me an error message - Error converting data type varchar to numeric (CINF)
I am getting the same error message even if I have some value in the Unit Price field...
I am really confused - what is wrong with it???
Here is the code from the Transaction notification
IF (@object_type = N'22' AND @transaction_type in (N'A', N'U') )
     BEGIN
          IF EXISTS (SELECT T1.DocEntry FROM OPOR T0 inner join POR1 T1 on T0.DocEntry = T1.DocEntry
          WHERE (T1.PriceBefDi IS NULL OR T1.PriceBefDi = ' ') AND T0.DocEntry = @list_of_cols_val_tab_del)
               BEGIN
                    Set @error =1
                    set @error_message = 'Unit Price cannot be blank'
               END
     END
Thanks,
Dejan

Value based on the periodic unit price (only with pr.ctrl S)

Dear all,
There is this field in mateial master called "Value based on the periodic unit price (only with pr.ctrl S)" in accounting view 1,
1 - May I know what is this field about (in between our company using material ledger).
2 - May I know why the value of this field are different between our company period 6 and period 7 for this year? what contribute to it? and is it something wrong with different value between two different period or absolutely normal?
Thanks.
Tuff

Dear all,
Does anyone know my question?
Thanks,
tuff

Value based on the periodic unit price(only with pr.ctrl S) field in MatMas

Dear all,
There is this field in mateial master called "Value based on the periodic unit price (only with pr.ctrl S)" in accounting view 1,
1 - May I know what is this field about (in between our company using material ledger).
2 - May I know why the value of this field are different between our company period 6 and period 7 for this year? what contribute to it? and is it something wrong with different value between two different period or absolutely normal?
Thanks.
Tuff

Hi Tuffy,
For your 1st query:
PUP field in Accounting 1 (if ML is active, Price Determination indicator=3) is the result of Actual Costing Run (CKMLCP) closing entry.
For your 2nd query:
In most of the cases the values will be different in Previous Period and Current Period. e.g.Period 6 values are the results of Actual Costing Run (CKMLCP) in 1st week of Period 6 for Previous Period (i.e. Period 5). Period 7 values are the results of Actual Costing Run (CKMLCP) in 1st week of Period 7 for Previous Period (i.e. Period 6).
The reason for the different values: Price differences, Exchange rate differences, Price/Exchange rate differences from Low lower materials, etc.
Thanks & Regards,
ADI

Value based on the periodic unit price (only with pr.ctrl S) field in mat.

Dear all,
There is this field in mateial master called "Value based on the periodic unit price (only with pr.ctrl S)" in accounting view 1,
1 - May I know what is this field about (in between our company using material ledger).
2 - May I know why the value of this field are different between our company period 6 and period 7 for this year? what contribute to it? and is it something wrong with different value between two different period or absolutely normal?
Thanks.
Tuff

Hi Tuffy,
For your 1st query:
PUP field in Accounting 1 (if ML is active, Price Determination indicator=3) is the result of Actual Costing Run (CKMLCP) closing entry.
For your 2nd query:
In most of the cases the values will be different in Previous Period and Current Period. e.g.Period 6 values are the results of Actual Costing Run (CKMLCP) in 1st week of Period 6 for Previous Period (i.e. Period 5). Period 7 values are the results of Actual Costing Run (CKMLCP) in 1st week of Period 7 for Previous Period (i.e. Period 6).
The reason for the different values: Price differences, Exchange rate differences, Price/Exchange rate differences from Low lower materials, etc.
Thanks & Regards,
ADI

How to find the Unit Price of an Item in the sales order for a customer.

Hi All,
I need to know a function module or table or any way by which I can find out the price of an item.ie unit price.
Thanks,
Ashish.

Hi
See table MBEW. The value or price is in terms of UoM that you have in MARA-MEINS (base unit measure). You have 2 diff. prices: variable and standard in function of type (field VPRSV).
Regards
Eduardo
Edited by: E_Hinojosa on Aug 12, 2011 10:49 AM

Authorisation for unit price in Sales Order

Hi Experts,
Is there a way to prevent users from being able to change the unit price of an item in Sales Orders? If not directly can anyone suggest a workaround to prevent access to this field? We have noticed recently that on some occasions when users were not able to apply certain discounts they had changed the unit price!
Regards
Geoff

Hi Goeff........
Its easily done by Authorization.
Just unauthorized an user to change the Unit price in General Authorization in sales module.
Or you can disable the unit price column through Form Setting and do not give authorisation to change form settings to that user........
Regards,
Rahul

Unit Price in Item Master Data

Step no.1) At time of Defining Item Master Data we are Defining Unit Price say<b> 2,000</b> <b>INR.</b> Data Saved in Price List 01.
Now with this information I am Preparing Purchase Order.After Selecting Specific Item unit price is reflecting in P.O by default, Then I modified Unit price from 2000 INR to 2500 INR in P.O.
Step no 2) I received material by Goods Receipt PO
Step no 3) When I am posting A/P Invoice based on GoodsReceipt PO in invoice the original Master Data Unit price is Reflecting.
Now vice versa I made another Transaction also in Another System.
In Step no 3 it is reflecting the Unit Price of Purchase Order.
Can I know why it gives different Information for same type of Transaction. Does I followed wrong System.
Regards
Narender

Please confirm the following.
Once you select a Price in PO it should carry all the way through at the AP Invoice and should not change unless changed manually.
Are you copying the PO > Goods Receipt PO > AP Invoice
And when copying to Goods Receipt PO or Invoice you are not changing the price or Pricelist
Pls let me know
Suda

How to validate the line item values in OFR - quantity , unit price and UOM

Hi All,
Is there any possibility to validate the line items like quantity, unit price and UOM against the DB and stops those invoices at verifier (1 batch =10 invoices) level if yes could you please let me know the process how to proceed further.
due to this some the invoices are coming to OFR is with incorrect quantity, UOM and unit price different from PO lines information like quantity , UOM and unit price and those invoices are not validating from the DB and these are processed to EBS and it's effecting the GL and reporting.
Regards,
Anil

Hi ,
I did not get the exact requirement.Let me bit:
In standard AP project lines validation will try to compare the quantity , unit price and UOM of line against the database for match which actually performed on export.
So even if match fails batch will be exported.Now if you want to correct it before EBS,i think you can do it in the business process easily that you are consuming whether BPEL/BPM process.
We have done this in several projects
=========================
But If you want that to be done from OFR side i think we need to code UserExitPONumberValidate event to compare the line items values against database.I need to test this also.

R12: Disable Field Quantity and Unit Price in Line Item (AR)

Hello,
Is there a setup in Oracle Receivables - Transactions where I can disable the field "Quantity" and "Unit Price" on the form for line item?
I don't have Order Management nor Inventory setup in this environment.
Note: In AP invoices, these field are disabled.
vik

Hello.
I don't think that is possible because the system uses those fields to calculate the Amount field, which cannot be filled in directly.
Octavio

Unit Price Field is in-active on a Purchase Order for a Normal User

Hi All,
One of my A/P user is unable to enter price on a Purchase Order as the PO Unit Price field is inactive. I have given this user full authorization on PO and activated the unit price field from form settings as well but as such nothing is happening. Can anybody tell me how to get it activated.
BR

+Naveed Jameel wrote:
<<Hi All,
One of my A/P user is unable to enter price on a Purchase Order as the PO Unit Price field is inactive. I have given this user full authorization on PO and activated the unit price field from form settings as well but as such nothing is happening. Can anybody tell me how to get it activated.>>+
Hello Naveed,
Have you given read only or full authorisation to the price list group associated with the price list used for your BOM?
KR
Murielle

How to round unit price in XSL-FO Standard Purchase Order

I have been trying to round the unit price of the Standard Purchase Order stylesheet that is written in XSL-FO. Please could someone suggest I how I could achieve this? As my attempt have been unsuccessful. In the stylesheet the following line of code returns the unit price.
<xsl:value-of select="UNIT_PRICE"/>
Thank you,
Mark

I assume you are talking about number formatting:
You can use the XPATH function format-number:
<xsl:value-of select="format-number(UNIT_PRICE,"####.#")"/>
This will ONLY work if UNIT_PRICE is a correct XSL number (meaning no thousand seperator). Otherwise you can probabley remove the , out of say 1,234,567 using the
translate function translate(UNIT_PRICE,",","") - Please check any XSL reference for additional information.
Hope that helps,
Klaus

Unit Price Format in XSL-FO Code for Standard Purchase Order Printing

Hi All,
As I am new to XSL-FO, so i am not aware of doing XML,XSL-FO changes. I have an issue with the xsl-fo for standard po layout. My report layout gives ##,## instead of ##.## as my Unit Price. i.e. in the report for POs, it is showing unit price in the format as #,## eg: 0,32 or u can say like 1,70 instead it should show #.## something like 0.32 and 1.70 as my unit price. The piece of code related to unit price formatting in report as follows:
<xsl:choose>
<xsl:when test="(UNIT_PRICE,1,1 > 1) and (substring-before(UNIT_PRICE,',') > 0)">
<fo:table-cell xsl:use-decimal-format="euro2"> <fo:table-cell xsl:use-attribute-sets="table.cell5"> <fo:block xsl:use-attribute-sets="form_data1">
<xsl:value-of select="format-number(substring-before(UNIT_PRICE,','),'#.###','euro2')"/>,<xsl:if test="(substring(substring-after(UNIT_PRICE,','),3,1)) > 4"><xsl:value-of select="(substring(substring-after(UNIT_PRICE,','),1,5))"/></xsl:if>
<xsl:if test="(substring(substring-after(UNIT_PRICE,','),3,1)) =''"><xsl:value-of select="(substring(substring-after(UNIT_PRICE,','),1,5))"/></xsl:if>
<xsl:if test="(substring(substring-after(UNIT_PRICE,','),3,1)) = 1"><xsl:value-of select="(substring(substring-after(UNIT_PRICE,','),1,5))"/></xsl:if>
<xsl:if test="(substring(substring-after(UNIT_PRICE,','),3,1)) = 2"><xsl:value-of select="(substring(substring-after(UNIT_PRICE,','),1,5))"/></xsl:if>
<xsl:if test="(substring(substring-after(UNIT_PRICE,','),3,1)) = 3"><xsl:value-of select="(substring(substring-after(UNIT_PRICE,','),1,5))"/></xsl:if>
<xsl:if test="(substring(substring-after(UNIT_PRICE,','),3,1)) = 4"><xsl:value-of select="(substring(substring-after(UNIT_PRICE,','),1,5))"/></xsl:if>
<xsl:if test="(substring(substring-after(UNIT_PRICE,','),2,1)) = ''"><xsl:value-of select="((substring(substring-after(UNIT_PRICE,','),1,1))-(substring(substring-after(UNIT_PRICE,','),1,1)))"/></xsl:if>
          </fo:block>
     </fo:table-cell>
</fo:table-cell>
</xsl:when>
<xsl:when test="(substring(UNIT_PRICE,1,1)=',')">
     <fo:table-cell xsl:use-attribute-sets="table.cell5"> <fo:block xsl:use-attribute-sets="form_data1">
     <xsl:value-of select="UNIT_PRICE"/>
     </fo:block>
     </fo:table-cell>
</xsl:when>
<xsl:when test="(UNIT_PRICE,1,1 > 1) and (substring-after(UNIT_PRICE,'.') > 0)">
<fo:table-cell xsl:use-decimal-format="euro2"> <fo:table-cell xsl:use-attribute-sets="table.cell5"> <fo:block xsl:use-attribute-sets="form_data1">
     <xsl:value-of select="format-number(substring-before(UNIT_PRICE,'.'),'#.###','euro2')"/>,<xsl:if test="(substring(substring-after(UNIT_PRICE,'.'),3,1)) > 4"><xsl:value-of select="(substring(substring-after(UNIT_PRICE,'.'),1,5))"/></xsl:if>
<xsl:if test="(substring(substring-after(UNIT_PRICE,'.'),3,1)) =''"><xsl:value-of select="(substring(substring-after(UNIT_PRICE,'.'),1,5))"/></xsl:if>
<xsl:if test="(substring(substring-after(UNIT_PRICE,'.'),3,1)) = 1"><xsl:value-of select="(substring(substring-after(UNIT_PRICE,'.'),1,5))"/></xsl:if>
<xsl:if test="(substring(substring-after(UNIT_PRICE,'.'),3,1)) = 2"><xsl:value-of select="(substring(substring-after(UNIT_PRICE,'.'),1,5))"/></xsl:if>
<xsl:if test="(substring(substring-after(UNIT_PRICE,'.'),3,1)) = 3"><xsl:value-of select="(substring(substring-after(UNIT_PRICE,'.'),1,5))"/></xsl:if>
<xsl:if test="(substring(substring-after(UNIT_PRICE,'.'),3,1)) = 4"><xsl:value-of select="(substring(substring-after(UNIT_PRICE,'.'),1,5))"/></xsl:if>
<xsl:if test="(substring(substring-after(UNIT_PRICE,'.'),2,1)) = ''"><xsl:value-of select="((substring(substring-after(UNIT_PRICE,'.'),1,1))-(substring(substring-after(UNIT_PRICE,'.'),1,1)))"/></xsl:if>
     </fo:block>
     </fo:table-cell>
</fo:table-cell>
</xsl:when>
<xsl:when test="(UNIT_PRICE,1,1 > 1 ) and (substring-after(UNIT_PRICE,',') ='') ">
<fo:table-cell xsl:use-decimal-format="euro"> <fo:table-cell xsl:use-attribute-sets="table.cell5"> <fo:block xsl:use-attribute-sets="form_data1">
<xsl:value-of select="format-number(UNIT_PRICE,'#,###.00','euro')"/>
          </fo:block>
     </fo:table-cell>
</fo:table-cell>
</xsl:when>
</xsl:choose>
PS: My decimal formats for euro and euro2 are:
<xsl:decimal-format name="euro" decimal-separator="," grouping-separator="."/>
<xsl:decimal-format name="euro2" grouping-separator="." NaN="0"/>
Any help or reply regarding this issue will be highly appreciated.
Regards,
Sumir

Hi Michele:
I can check out for you how to print page number in XSL-FO (There is an O'Reilly) book, but I think I help you better by recommending a different strategy - Don't write XSL-FO stylesheets. While Purchasing does not support RTF templates you can still write RTF templates and convert them to FO using the XML Publisher Template Builder for Word.
Download the matching Template Builder for Word (5.0) or XML Publisher Desktop 5.5 (includes the Template Builder) patch and then Create your template as an RTF template.
You can then EXPORT the template as XSL-FO stylesheet and upload as to Purchasing AS LONG AS THE VERSION OF THE DESKTOP and E-Businees Suite XML Publisher MATCH.
If you still want to write XSL stylesheet, you can just use the Template Builder to generate you the code and paste the code (e.g. for page numbers) into your stylesheet.
By the way - Purchasing will support RTF templates in future versions...
Hope that helps,
Klaus

Terms user query Changes in unit price in purchase order and a/p invoice

Dear sir
please give me a term user query for , if any changes in unit price in purchase order and a/p invoice

Hi,
Try this:
SELECT Distinct ' true'
FROM adoc T2
JOIN ado1 T0 ON T2.docentry = T0.docentry AND T2.Objtype = '22'
JOIN por1 T1 ON T1.docentry = T0.docentry AND T1.Linenum=T0.Linenum
WHERE $[$38.14.number] != T0.Price
Thanks & Regards,
Nagarajan

UNIT PRICE - MR21

Similar Messages

Maybe you are looking for