Unit price needs to show Euro not GBP Question

Hi,
We have a Goods Receipt PO and the Unit price is showing GBP but the Total (Doc) field is in Euro. We know this is becasue the Unit Price is based on the Price List but how can we change the Unit price to show Euros ie so all the fields show Euros ?
Thank you,

Mathew
The GBP or EURO notation comes from the Price List, so if you change the GBP to EURO, it will show as EURO on all documents that use the Price list.
Robert

Similar Messages

Mat Ledger, Per.Unit Price for materials showing wronglu in Group Valuation

Hi,
Periodic Unit Price of the materials for plant 1300 belongs to company code 1300 showing wrong value in Group Valuation.
Usually Periodic price for all valuations viz., Legal, Group and Profit center valuations should be same, why because we are using same cost component structure in order to arrive the actual cost for all the above three valuations.
Even though Group Valuation of Per. Unit Price is not matching with the Legal and profit center valuations Per. Unit Price. But both legal and profit center valuations are matching.
Please note that, actual cost component split for actual costing is not activated for plant 1300.
When analyzing this issue, it is observed that only the settlement value in between the Group, Profit center and legal valuation is differing for material ledger document.
But accounting document, PCA document, controlling documents are updating correctly.
Please help us how can i proceed to get the details of cost components, even actual cost component structure is not activiated for actual costing.
what are the possible reasons for differing values in Group valuations.
Regards,
S Vasu
Because of this reason system is calculating different values in group valuation (comparatively with legal and PCA valuations) at lower levels and flowing the same values to multilevel.
Edited by: VASU SIKHAKOLLI SIKHAKOLLI on Mar 8, 2009 5:53 AM

Dear
No all are different currencies
Regards
Sivakumar S.

Invoice needs to show USD not EUR

I need my iintercompany nvoice to show USD dollars and not the EUR dollars. I want to keep my sales order as is with the EUR but invoice needs to read the USD...is this possible? if so, please advise how to achieve?
Edited by: Kimberly Blair on Apr 1, 2010 5:53 PM

Thanks for your response..I was thinking of the exchange rates...if I add EUR to USD and USD to EUR will that allow the USD to show on the invoice...what would be the steps for this...please
The invoices are generated from US and the sales order is from a different country....the config was not set up as cross company codes with the US company code as the payor so I am working with what we have...

I am trying to download music. I had to reset my computer to manufacture settings. Itunes is telling me that where it is a new computer i need to comfirm with security questions. the questions that are showing are not the questions i chose

i had to reset my computer to factory settings and had to redownload itunes. i am not attempting to purchase songs and its asking me for security questions. however, the questions that they are asking i never chose. how can i change them?

Hi Gorgeousgal13,
Thanks for visiting Apple Support Communities.
You can use these steps to reset your Apple ID security questions:
Navigate to My Apple ID using your web browser.
Click "Manage your account"
When prompted, sign in using your Apple ID and password.
Click Password & Security
You'll be asked to answer 2 of your 3 security questions before you can make any modifications. If you are unable to remember your answers, you can choose to send an email to your rescue email to reset your security questions.
From:
Rescue email address and how to reset Apple ID security questions
http://support.apple.com/kb/HT5312
All the best,
Jeremy

How do I get the Questions in the Survey to show up in the Report? Only the answers are showing up, not the Questions....

I only know how to input them manually, and I am sure there must be another way?
Kind regards,
Renata

Hi Ellen,
Is your Router brodcasting it's SSID?
If not, try this, click on the Airport icon, choose Other, fill in the info.

Showing Zero Unit Price/Row Total

Hi,
We currently allow posting rows for item sales with zero unit price. I am having trouble showing the unit price and row total as "$0.00" instead of a blank field with PLD. Both of these fields are system variables (80 and 84), neither field is linked to itself, and neither field has the 'Suppress zeros' box checked. Any possible solution to this? Thank you.

Hi there,
You could try using a formula type field and multiplying your system variable field by 1.
- Say for example your Unit Price field has a Unique ID of F_100.
- Create a new line Formula field and set its value to Round(F_100*1,2).
- This will display your zero value unit price as 0.00.
- Note that I'm only using Round() to display zeros after the decimal place, otherwise the zero value unit price would appear as 0. So change the number of decimals as required.
- Unfortunately this removes the currency code display from the value so you will need to re-display it if required, you can do this using a database type field and selecting the Price Currency field.
Do the same for row total. Hope that helps.
Regards,
Andrew.

I apologize if this is a repeat -- I can't find if my question has been posted, but all traffic received through SAFARI (but not FIREFOX) quoting prices has the latter in EUROS, not US Dollars. Figures in my outgoing Email appear to the recepient in Dolla

I apologize if this is a repeat, but I can't tell if my question has been posted.
For the past several weeks, all incoming traffic via Safari 5.0.5, but not Firefox,containing cost/price figures appear in Euros, not US Dollars. My responses, however, are received correctly in US Dollars. Wierd, and irritating. Any ideas?

To answer the post title FireFox save all downloads automatically in the download folder, which you can find in the Documents folder. If you want to choose where to save your downloads go to tools>options>check always ask me where to save files.
Secondly, I am assuming you have IE 8 installed as this is the only version that supports this fix that is currently not in beta. Go to control panel>internet options>advanced tab and reset the settings at the bottom. This may or may not fix the problem but it is a good first step.

How to validate the line item values in OFR - quantity , unit price and UOM

Hi All,
Is there any possibility to validate the line items like quantity, unit price and UOM against the DB and stops those invoices at verifier (1 batch =10 invoices) level if yes could you please let me know the process how to proceed further.
due to this some the invoices are coming to OFR is with incorrect quantity, UOM and unit price different from PO lines information like quantity , UOM and unit price and those invoices are not validating from the DB and these are processed to EBS and it's effecting the GL and reporting.
Regards,
Anil

Hi ,
I did not get the exact requirement.Let me bit:
In standard AP project lines validation will try to compare the quantity , unit price and UOM of line against the database for match which actually performed on export.
So even if match fails batch will be exported.Now if you want to correct it before EBS,i think you can do it in the business process easily that you are consuming whether BPEL/BPM process.
We have done this in several projects
=========================
But If you want that to be done from OFR side i think we need to code UserExitPONumberValidate event to compare the line items values against database.I need to test this also.

Unit Price Calculation on Smartform

Hi Friends,
 I am in a need to calculate and print unit price in Smartform, I am not supposed to make any changes in Driver Program. Here, the fields FKIMG(total quantity) and NETWR(Total amount) are selected from table VBRP and stored in an internal table itab. now this itab is passed to smartform tables interface. So my itab only have 2 fields FKIMG and NETWR. I need to calculate Unit Price = NETWR / FKIMG.
The out put required is like this,
Total Qty Unit Price Amount
20 100 2000
05 300 1500
08 200 1600
How to do this in smartform--- please help me.
Regards,
Ajoy

Hi Ajoy..
In case of SMARTFORMS we can add the Logic using PROGRAM LINES Node.
Steps:
1. Create a variable in the Global data Tab in Global Definitions of Smartform.
 Eg: V_UNITPR TYPE VBRP-NETWR
2. Create a Program lines node above the Text node where the Unit price has to be displayed.
 Input Parameters: VBRP-NETWR and VBRP-FKIMG
 Output Parameters: V_UNITPR.
 Code:
 V_UNITPR = VBRP-NETWR / VBRP-FKIMG.
3. Check the Program lines node and Display the Field V_UNITPR.
Reward if Helpful.

Unit Price and Discount % is INACTIVE

Hello Experts,
In A/P Invoice unit price column is inactive rather not allowing to enter value in it. In form settings it is active.
Help Required.
Shazad Nazir

Nazir
I guess full authorization is needed to enter unit price, check in
Sales Reports --> Change Row Amounts --> Full Authorisation
and also have a look at this thread
Authorisation for GRPO
Thanks
Rizz

Unit Price in Bulgarian(BG) language is printing as ##

Hi,
In BG language the Unit price (ST) is showing as ##, any inputs. Rest all are showing perfect.

After installing few fonts the problem got solved

Unit price is not showing in SO

Dear Experts,
We have the problem with Sale Order
Some items, they are shown the unit price but are not
I check doc setting
I check price in item master
I just don't know what's going
Anyone please help !!

hI,
Check your price list assignment. If it is on BP level.
Check the price list. If the price is entered in the price list.
Check if any special price exist for that item. If it is so SAP always gives priority to special Prices.
Check form settings. If price column is visible and active.
Check form settings if any price list is assigned there. Because it takes precedence.
Thanks
Malhaar

GR amount is not matching with PO unit price

Hi folks,
I have created a Purchase Ordre in foreign currency euro with account assignment project. Say the unit price of the item is euro 500/pc. While doing GR for three pcs, it is showing in purchase order history only 9 euros and in local currency column 44.45 saudi riyal as per conversion mention in po.
Why it is not showing 1500euros?
Please reply urgently.
Regards

Hi,
You need to check for following:
1 ) PO HEADER level currency
2 ) Exchange Rate in PO
3 ) Also, check for VENDOR MASTER :: Purchasing Data view for Pricing Date control field
Also for present date check for exchange rate between currencies which is generally maintained by FI

Net Unit Price of Invoice Item Not Kept/Deleted

Hello everyone,
Yesterday I had an issue with a supplier invoice uploader I've created --- it uploads consistently which is nice, but for some reason the unit price is disappearing on me. I've got the following lines:
in which 'row.zItemNetUnitPrice' is decimal (currencyCode is always going to be GBP in this case, so I figured I didn't need it) and row.zAmountOrdered is obviously a Quantity type. Now, here's the strange part: when 'newSIItem' is created using siItem, the unit price is deleted --- as in, immediately after creation of newSIItem, the unit price is set to 0.00. But the amount ordered is kept as it was set. So obviously that's weird, and is causing all my invoice items to be created as zero price --- you'll agree that's not very helpful.
What's also strange is that, in order to remedy this I tried to just set the unit price to what I wanted AFTER newSIItem was created, as according to the repository explorer it's not read-only. This worked --- up until I set the account assignment type, at which point it got set BACK to zero as follows:
As you can see in the debugger, it says 'changing invoice price not possible...'. --- but the net unit price field isn't read-only. So my overall question is: what the hell is going on? Any help would be greatly appreciated. Attached is my entire mass-enabled AfterModify script and the XML file I'm using as part of a file input run on the custom business object to which this script belongs. Thanks!
Lewis
EDIT: I tried moving 'newSI.NetUnitPrice.Amount.content = row.zItemNetUnitPrice' to after the account assignment --- it seems it was invalidated by any subsequent command, even to the point that having it directly before setting gross amount to total gross amount would still not work. I also tried setting net amount instead of net unit price --- the debugger specifically told me that net amount is read-only. But the repository explorer says it has write access. Anyone able to shed light on this?

I solved this --- I noticed that I had siRoot.DocumentGrossAmountsIndicator set to false but creating the root node (newSI = SupplierInvoice.Create(siRoot)) turned that back to true again for no apparent reason. My guess is that having this set to true, i.e. all values are gross, dynamically sets all net fields to read-only. Once I discovered this it was as simple as setting the indicator back to false post-creation of the root node, and then net price fields were accessible again.

Creating order form and need Java Script to calculate unit price and quantity in Acrobat Pro.

Hi,
I am creating order form in Acrobat Pro , and I have
code
Order Quantity
Unit price $
201
500
$ 0.52
201
1000
$ 0.36
202
300
$ 0.26
202
500
$ 0.2
How make Subtotal and Total price with Java script.
I do not know how to write java script.
Anyone can help me?
Thanks,

Thanks for your response. I have 2 quantities and 2 Unit price for each code, I know a simple sum in calculation it works for 1 unit price and quantity. Can you please let me know how to do it? One of the expert sent m this:
//change field names as needed
var qt1 = this.getField("qt1").value;
var up1 = this.getField("up1").value;
var qt2 = this.getField("qt2").value;
var up2 = this.getField("up2").value;
event.value = (qt1 * up1) + (qt2 * up2);
I put this in total text field (calculation tab , Custom script) , but it did not worked.
I appreciate it if anyone can help or give me suggestion.

Unit price needs to show Euro not GBP Question

Similar Messages

Maybe you are looking for