Unitor8 and AMT8 OSX drivers moved to where?

Hi all,
I finally upgraded to Logic 7 after many years with Logic 4.7. Hooray!
Unitor8 control won't see my Unitor8+3 AMT8's. I can't seem to find the Unitor firmware updater anywhere. I searched these forums but all of the links seem to be expired and return the following: "Looking for something at Apple?"
The Unitor8 is recognised in Apple System Profiler.
Does anyone know where Apple/Emagic may have moved these firmware updaters/drivers?
Thanks,
m-12

The driver is here:
http://download.info.apple.com/AppleSupport_Area/emagic/DriverFiles/OS%20X%20Drivers/
(attention if the line is wrapped...)
The file you want is:
mididrvmacosx.sit
Not sure if it is necessary, nevertheless.
jm

Similar Messages

I have a Lexmark X1185, but I do not have the driver CD that came along with it. I have a 15" MacBook Pro (Late 2011) and I cannot seem to find drivers for OSX Lion.. Where can I find the drivers?

I have a Lexmark X1185, but I do not have the driver CD that came along with it. I have a 15" MacBook Pro (Late 2011) and I cannot seem to find drivers for OSX Lion.. Where can I find the drivers? Thank you for the help!

Have you looked on Lexmark's support site?
http://support.lexmark.com/index?page=content&id=OS23&locale=en&userlocale=EN_US

I have a Mac Pro 4,1 quad core intel Xeon running mac OSX 10.6.8 and I have just moved studios and now need to use the Internet wirelessly but there's no airport facilities on this model can anyone tell me what model of airport card I would need for this

I have a Mac Pro 4,1 quad core intel Xeon running mac OSX 10.6.8 and I have just moved studios and now need to use the Internet wirelessly but there's no airport facilities on this model can anyone tell me what model of airport card I would need for this mac

Instead of getting a wireless card for the Mac Pro, you might want to consider getting an 802.11ac wireless bridge device that would enable you to connect more than one device to it by Ethernet cable and to eventually take advantage of the faster 802.11ac wireless standard.

I am using a 1.5 GHz Powerbook G4 with OSX v10.4.11 Can I upgrade to 10.5 and will that let me use an Ipad 2 and a Iphone 4 ? Also, where would I get a disc of 10.5?

I am using a 1.5 GHz PowerBook G4 with OSX v 10.4.11. Can I upgrade to 10.5 and will that allow me to use an Ipad 2 and an Iphone 4. Also, where could I get the disc for the upgrade (10.5) ?

Yes for both iPhone and iPad 2.
You can get Leopard from Amazon.
http://www.amazon.com/Mac-OS-Version-10-5-6-Leopard/dp/B000FK88JK/ref=sr_1_1?ie= UTF8&qid=1305690502&sr=8-1
Make sure your PBook meets Leopard minimum requirements.
http://support.apple.com/kb/HT3759
Avoid eBay and Craigslist for Mac software.

Color laserwriter 12/600 and 12/660 drivers for OSX

Hello
Where can you download the old Apple colour laserwriter 12/600 and 12/660 drivers.
I just had to reinstall my system from a time capsule back-up and it didn't restore my printer.
(yes a Do know its a really old printer but it still keeps working for me:))
Hope someone can help me out.
This is the list apple use to have, but where can I get it now
Apple software
Model
Version
Print
Scan
Fax
Apple Color LaserWriter 12/600 PS v2014.108
4.1
P
Apple Color LaserWriter 12/600 PS-J v2014.108
4.1
P
Apple Color LaserWriter 12/660 PS v2014.108
1.1
P
Many thanks
Andrew

I haven't found a source for the specific Apple Laserwriter PPDs yet. PPDs are all that's needed to print to postscript printers.
You should be able to use "Generic Postscript Printer" driver choice to print.
I don't have one of those - is the comm protocol you used to add it the "IP > LPD" protocol? IP > IPP won't be appropriate, because the printers were made before IPP was conceived.
By the way, if you can locate the PPD files from an old backup, that should work. PPDs for an already-added printer are found in /etc/cups/ppd (using Finder's Go menu -- Go To Folder for the boot drive, and drill down in the /etc folder on a backup drive).

My 2009 MacBook Pro keeps restarting even after I wiped the hard drive and reinstalled OSX.

About a month ago, my laptop started to randomly turn off: I would be using either Chrome, Photoshop (the free CS2 version available from Adobe's website) or Powerpoint, and the screen would go blank. I would then have to hold the power button for a while until the little light at the front of the computer would flicker and it would restart. I brought it to the Mac Store where they tested it and said it looked fine. They suggested I erase my hard drive and reinstall OSX as a precaution.
Fast forward a month, I have been very busy with work and hadn't been able to fix this problem. It wasn't that bad, only once every couple of days, sometimes more, sometimes less, I could work despite this problem.
Then, I installed OSX Mavericks. The installation started in the morning, but, like an idiot, I paused it to go to work. Later on, I completed the installation, it looked fine, but then all day long my laptop would suddenly restart and go to a grey screen that said in multiple languages "Your laptop restarted because of a problem, press any button to continue the restart." A computer technician friend of mine checked it out and said it was probably due to the badly installed OSX and suggested that I erase my hard drive and reinstall OSX.
I backed up all my files, erased the hard drive and reinstalled OSX. Everything looked fine.
Then it happened again.
Any ideas of why this is happening?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

I have a Windows 7 laptop using I tunes 64 and all my music files are on an external disc. I rarely use I tunes and at one point moved all my files (including the music files) from one external disc to another without considering what affect this wou

I have a Windows 7 laptop using I tunes 64 and all my music files are
on an external disc. I rarely use I tunes and at one point moved all my files
(including the music files) from one external disc to another without
considering what affect this would have on the I tunes library. When I eventually
attempted to use I tunes, every selected a song from the library resulted in a
message stating that the file couldn't be located. After following some of the procedures
explained in this community I was able to reconnect the library back to where
the associated music files are presently stored. However, there are still 2
problems that need to be corrected. 1) Every song file now has a duplicate. One
file works and the other file will result in the same message stating that the
file couldn't be located. Before there were 4,000 songs in the library, now
there are 8,000 songs. I need to eliminate the 4,000 dead song files. 2) All
the playlists are still associated with the dead song files which makes the
playlists unusable. Can the playlists be reconnected to the usable files
without manually having to recreate them? Thanks in advance for the help.
sdkr

So am I understanding correctly?
You used your iPod as a hard drive (drag and drop) instead of having iTunes install the music?
If you used drag and drop your choices are different than if you used iTunes to transfer.
Good luck!

HT201413 I am receiving the error code (-50). The original itune songs etc were installed on a win 7 32 bit system and I have now moved to a win 7 64 bit system. Is this why I get the error code? I can access the itunes store to view my account. Any ideas

I am receiving the error code (-50) when trying to access the itunes store. The original itune songs etc were installed on a win 7 32 bit system and I have now moved to a win 7 64 bit system (same PC) and have copied the folder across. Has the switch from 32 to 64 bit caused the problem? Is this why I get the error code? I can, however, access the itunes store to view my account. Any ideas please?

Hello,
The TechNet Sandbox forum is designed for users to try out the new forums functionality. Please be respectful of others, and do not expect replies to questions asked here.
As it's off-topic here, I am moving the question to the
Where is the forum for... forum.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book: Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C40686F746D61696C2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

I am trying to get my Canon MP190 to print with Macbook, OS10.5.8. I used to use the printers utility file to check ink levels. Now am told must go to Apple for latest drivers, etc. Where do I go??I am lost.

DesertCatVicki
I am trying to get my Canon MP190 to print with Macbook, OS10.5.8. I used to use the printers utility file to check ink levels. Now am told must go to Apple for latest drivers, etc. Where do I go??I am lost.

Printer and Scanner software available for download:
http://support.apple.com/kb/HT3669?viewlocale=en_US

HT4623 I have just updated to ios7 on my iphone and don't like the look and feel of this update. Where are all the colors and texture of all the older isos, all those white background colors,yuk. Is a way to go back to the ios6

I have just updated to ios7 on my iphone and don't like the look and feel of this update. Where are all the colors and texture of all the older isos, all those white background colors,yuk. Is a way to go back to the ios6

"Unlike". iOS 7 doesnt display well on my 4S. iOS 6.1.3 should still be supported for older hardware. I think I shall me moving to Samsung Galaxy now. Was really hoping hte new iphone would get a bit larger.

Have iMac running OSX 10.5.8, where can I find the upgrade?

have iMac running OSX 10.5.8, where can I find the upgrade?

Why would that be irritating?? I suspect you are after Mavericks, in order to get Mavericks you have to have the Mac App Store app which did not become available until Snow Loepard 10.6.6. Once you have purchased and installed SL then install the 10.6.8 combo update, run Software Update again and install all suggested updates and finally you can get Mavericks.

How To Install and Configure External Drivers for JDBC & JMS Adapters"

hello ,
where can i download this Guide "How To Install and Configure External Drivers for JDBC & JMS Adapters"?
thanks
best regards
pietro greco

Hi Eleonore Rosenthal,
Could you please check the below links:
http://help.sap.com/saphelp_nwpi71/helpdata/en/33/e6fb40f17af66fe10000000a1550b0/content.htm
http://help.sap.com/saphelp_sm32/helpdata/en/33/e6fb40f17af66fe10000000a1550b0/frameset.htm
Regards,
S.Manu.

Using INET and DATADIRECT JDBC Drivers to connect MS SQL Server 2005

Hi,
I have reqmt to connect SQL server 2005 from ODI using INET and DATADIRECT JDBC drivers to test Local characters Encoding.
In my case, Oracle is the Source and SQL Server 2005 is the Target. I have problem while interfacing Local Characters to SQL Server 2005 using com.microsoft.sqlserver.jdbc.SQLServerDriver driver( which is default driver provided by ODI). To fix local charatcters issue, I want to try using INET or DATADIRECT JDBC drivers. Please provide me the below of any one has used these Drivers to connect SQL Server 2005 from ODI.
We are trying to connect to MS SQL Server 2005 from ODI Topology Mgr using INET and DATADIRECT JDBC Drivers. We need the following info to connect to the same,
--> What are list of the drivers need to be placed in OraHome_1\oracledi\drivers path?
--> Where can i get the latest driver versions.
--> What are the JDBC DRIVER and URL formats.
--> Any other additional configurations?
--> Does these drivers support interfacing of Local character data.
Please respond...
Regards,
Anil

Check this article [HOW TO: SQL & JAVA|http://www.shahriarnk.com/Shahriar-N-K-Research-Embedding-SQL-in-C-Sharp-Java.html] for details on how to connect to SQL Server database from C#.NET database applications as well as Java database applications. It also describes how to pass embedded SQL queries (SELECT, INSERT, UPDATE, DELETE), calling stored procedures, pass parameters etc.

Mail and adresses lost after moving home.dmg to another mac?

Having to move someone from one mac to another (both G4s running 10.2.8). I thought I'd simply be able to delete the user from the old machine, thus creating a ".dmg" file of that user. I then transferred this to the new mac where I had created a new user account of the same name as on the old mac. Having then logged in as root, I deleted the contents of the newly created user's Home folder and replaced it with the contents of the mounted .dmg file.
Logging back in as the new user, I find that Mail and Address Book have both lost their links to the transferred data files that were associated with the user on the old mac!
How can I re-establish the links with the previous data (if it still exists, which I hope it must do!)?
Many thanks
deano_h
PBG4 Mac OS X (10.4.5)
PBG4 Mac OS X (10.4.5)

On my Windows XP operating system, the organizer file is located in my profile's directory:
%USER%\Application Data\Adobe\Acrobat\9.0\Organizer90 (I have Acrobat Pro 9.2)
I have shared my organizer file with coworkers, but all my documents are located on a network and we are all mapped to the drives in the same way.
If a file is moved from where the Organizer has it referenced, the file will disappear from the collection. The Organizer90 file can be opened in notepad, but it is not meant to be edited that way. Editing the file will cause Acrobat to delete the altered file and regenerate a new one.

DVDA and new Creative drivers/softw

I may have had too much to dream when I read it, or thought I read it, but are new drivers etc, disabling the ability to play DVDA disks with my Addigy 2 ZS Platinum? It may have just been a WinDVD issue but I can't remember and am loathe to upgrade my softs and drivers.

Just tried this using my X-Fi and the latest drivers from Creatives site and it's made a big difference. Some parts where I was getting a fps rate in the twenties are now up into the fourties. So a big thank you for posting this!
Wondered if it'd help my Call of Duty 2 demo problems but no go. :-(
Also, with the X-Fi cards there is another process listed that I terminated as well, after testing with the other one disabled already. It's called 'CTXFIHLP', which I'm asuming is an X-Fi only extension of the CTHELPER.
Didn't seem to make much difference, if at all, to the f.e.a.r demo but only did a quick test and haven't tried it with that one terminated and the other one left running.
Going to try BF2 in a bit,

Unitor8 and AMT8 OSX drivers moved to where?

Similar Messages

Maybe you are looking for