Units field XYZ for field ABC of DataSource ZRST Message no. R8147
HI,
When I'm trying to SAVE my datasource ZRST, I've got following error.
Units field XYZ for field ABC of DataSource ZRST Message no. R8147
In extraction structure of this datasource thare are at least two fields that use the same unit field.
Accordign SAP note no 867795:
One of the fields is displayed and another is hidden.
Then the unit field is hidden and the above error occurs.
This note is valid for component SAP_ABA release 700. I'm running my R/3 source system on SAP_ABA 620.
Could it be the same case as described in this SAP note?
Anybody got same problem? Please advise.
Thanks
m./
Hi,
Please check the dependencies on the fields, as some fields should have the units defined ,check the fields and activate the datasource.
hope this helps,
thanks,
vrrp.
Similar Messages
-
Units field MEINS for field TOTQTY of DataSource ... is hidden
hI,
I am getting "Units field MEINS for field TOTQTY of DataSource ZDS_BEALO is hidden
Message no. R8147 "
error message while creating the generic extration using fuction module...
Please help to slove thisI solved this problem myself by writing ABAP program.
REPORT ZTEST.
TABLES ROOSFIELD.
DATA: ITAB LIKE ROOSFIELD OCCURS 0 WITH HEADER LINE.
SELECT * FROM ROOSFIELD INTO TABLE ITAB
WHERE OLTPSOURCE = 'DATASOURCE_NAME'
AND FIELD = 'WAERS'.
*update ROOSFIELD set SELECTION = 'X'.
*ENDSELECT.
Create a report program and update the value of field "SELECTION" as above.
Then try to make changes in RSO2 as it needed.
Let me know if you need my help..
Thanks,
Hanuma -
Units field WAERS for field NAVALUE is hidden for DataSource ..
Hi,
I am trying to change the DataSource but getting the error "Units field WAERS for field NAVALUE is hidden for DataSource ..".
It is not allowing me to get the field list to change after that.
Can anyone throw somelight on this issue please..
Thanks,
HansI solved this problem myself by writing ABAP program.
REPORT ZTEST.
TABLES ROOSFIELD.
DATA: ITAB LIKE ROOSFIELD OCCURS 0 WITH HEADER LINE.
SELECT * FROM ROOSFIELD INTO TABLE ITAB
WHERE OLTPSOURCE = 'DATASOURCE_NAME'
AND FIELD = 'WAERS'.
*update ROOSFIELD set SELECTION = 'X'.
*ENDSELECT.
Create a report program and update the value of field "SELECTION" as above.
Then try to make changes in RSO2 as it needed.
Let me know if you need my help..
Thanks,
Hanuma -
How to Make field for selection in the datasource.
Hi All,
I want to enable one field in the DataSource for selection. I am not getting where can we make that enable.
I know we have one check box in transfer structure for make file for selection. But I am getting that is grayout , not able to check that ?
Please let me know where can we change the setting to make it enable.
regards
Ashutosh DLook at Roberto's reply in the below post :
Re: Hos to make a filed to be required field when creating datasource
What is ur datasource ..?
Have u tried RSA6 Change Mode for that datasource - Flag Selection?
Message was edited by:
Jr Roberto -
Units field WAERS of particular Datasource is hidden
Hello friends,
While cration of datasources through Function module i am getting below error on saving
Units field WAERS of particular Datasource is hidden
Could someone plz assist on this issue....
points would be given on replies...
Regards
jitenHi,
Go to RSO2 and see if you are able to see WAERS field there or not??
If this field is hidden??
Also what is your key figues in the data source...if its referencing some other currency unit fields in the table??
you will have to inculde WAERS in the structure as well.
Bascially all those units and currencies should be included in the structure which are getting referenced by the unit or currencieds which you are using in the data source
Thanks
Ajeet -
How to Map the Unit field in case of DSO and INFOCUBE
Dear Experts,
I have a issue ,Please help me to solve this
I have DSO as provider ,
And, i have to map transformations btw the Datasource and DSO.
In generic Data source, i have unit fields like BASME,MEINS (Quantity units) & STWAE (currency field)
and normal Quantity fields like KWMNG,OAUME(quantity related),OAUWE (value related).
In DSO data fields as Key figure info objects like 0Quantity (which have 0Unit as unit of measure) and some other key figures which have there respective unit of measure in info object definition.
So you Please tell me how to map the Quantity ,Amounts, unit fields to key figures that we have.
(How it will be for both DSO and Info cube is there any difference?)
Edited by: AnjunathNaidu on Jan 18, 2012 1:20 PMNavasamol ,
If it is works ,will u please tell me what is the difference ,if the transformations btw data source and DSO and
what is the difference btw data source and info cube and btw DSO to Infocube or cube to cube .
And i have seen the Quantity fields and there respective unit fields are mapped directly to key figure info object
in case of Info cube . Its working fine .
If only 1:1 mapping allowed in DSO data fields key figures and there respective unit of measure characteristic.
why this difference btw DSO and Info cube can any one explain me in detail.
Expecting your valuable suggestions.
Thanks & Regards,
Anjunath Naidu
Edited by: AnjunathNaidu on Jan 18, 2012 4:05 PM -
Logic behind ZMNG field of 2LIS__04_P_COMP datasource
Hello Experts,
Cab anyone please tell me How ZMNG field of 2LIS__04_P_COMP datasource populates...?
what is logic behind ZMNG?Hi,
ZMNG or target consumption quantity is basically requirements quantity
on the basis of the quantity produced.
Target consumption quantity
Definition
Requirements quantity on the basis of the quantity produced.
If the component quantity is constant for each order, the target
consumption quantity corresponds to the requirements quantity, otherwise
the target consumption quantity is calculated using the following
formula:
Quantity of goods received * required quantity per order unit of measure
order item quantity * ( order item quantity - quantity of scrap from
an order item )
make sure you have note 1497825 installed.
Colin -
Missing Currency Field/ Unit Field.
Hi Experts,
I'm trying to load Master data in to an InfoObject, And the master data contains 5 char and 3 keyfigures.
I have created 2 KFs as Amount and have mentioned data type as currency field and Fixed currency as INR
and the other KF as Quantity and Fixed Unit of Measure as EA.
And my Flat file contains column 8.Quantity, 9.UnitOfMeasure, 10.UnitPrice, 11.TotalValue.
While I try to activated the Datasource I'm getting an Error as (Position 8) Missing Currency Field/ Unit Field.
Can anyone tell me what has gone wrong with it please.
ThanksCheck have you assigned the fileds from your flat file for Unit and Current to the Data Types in UNIT and CUKY.
Cheers,
Neel. -
Hi Folks-
The Org Unit field in IT 0001in PA is not capturing the ORG unit stored in OM.Integration is active between OM and PA currently.The Job and position fields are carrying over without any issues.
Used RHINTE30- and the org unit is allready there in Table T527X. What is the solution?Hi,
I got the same prob, and resolved with the following. Replied for general help purpose. As this post is from Dec, hopfully u hv already done.
please do the following steps.
**Go to Tcode SA38
1- Run report RHINTE10
program allows you to create object types in Personnel Administration (HR-PA) which have already been set up in Personnel Planning and Development (HR-PD) and which are needed for integration. dont forget to uncheck "Test" check box.
The following object types are relevant to integration:
PD PA
Work center (object type A) Tables T528B, T528T
Job (Object type C) Tables T513, T513S
Position (Object type S) Tables T528B, T528T
Organizational unit (Object type O) Table T527X
2) Run RHINTE20
This program can be used to check whether the relevant object types for integration have been created in both Personnel Administration (HR-PA) and Personnel Planning and Development (HR-PD).
The entries in the HR tables T513/T513S (job), T528B/T528T (position, work center) and T527X (organizational unit) are compared with the corresponding objects that have been created in the HRPnnnn file for PD in the integration plan version.
Objects that are missing either in PA or PD can be created immediately
3- Also check ur org struct in PPOME. Hope ur prob will b ok with 1st two task
regards, -
Want to create program (XYZ) for scheduling anther program(ABC)
Requirement :
I have one report ABC and I want to create program XYZ for scheduling the report ABC (without executing the program ABC ).
Output : Program XYZ
1) schedule the report ABC
2) Provide the output of ABCSeee if the below code help:
REPORT Z_MQSCHD NO STANDARD PAGE HEADING LINE-SIZE 170 LINE-COUNT 58 .
DATA: ZCOUNT LIKE SY-TABIX,
JOBNAME LIKE TBTCJOB-JOBNAME,
PARAMS LIKE PRI_PARAMS,
JOBCOUNT LIKE TBTCJOB-JOBCOUNT,
AUTHCKNAM LIKE TBTCJOB-AUTHCKNAM,
SDLSTRTTM LIKE TBTCJOB-SDLSTRTTM,
SDLSTRTDT LIKE TBTCJOB-SDLSTRTDT,
VARIANT LIKE RALDB-VARIANT,
REPORT LIKE SY-REPID,
ZTIME LIKE SY-UZEIT,
PREDJOB_CHECKSTAT LIKE TBTCSTRT-CHECKSTAT,
PRED_JOBCOUNT LIKE TBTCJOB-JOBCOUNT,
PRED_JOBNAME LIKE TBTCJOB-JOBNAME,
RELEASED LIKE BTCH0000-CHAR1.
*email variables
DATA: emailaddr(80) TYPE c.
data: objtxt like solisti1 occurs 10 with header line.
data: tab_lines like sy-tabix.
DATA: OBJECT_HD_CHANGE LIKE SOOD1.
DATA: OBJECT_TYPE LIKE SOOD-OBJTP.
DATA: OBJCONT LIKE SOLI OCCURS 0 WITH HEADER LINE.
DATA: RECEIVERS LIKE SOOS1 OCCURS 0 WITH HEADER LINE.
SELECTION-SCREEN: BEGIN OF BLOCK A1 WITH FRAME TITLE TEXT-001.
PARAMETERS:
NAME LIKE RS38M-PROGRAMM OBLIGATORY,
VAR LIKE RS38M-SELSET OBLIGATORY,
JOB LIKE TBTCJOB-JOBNAME,
FRQ1 LIKE SY-INDEX,
FRQ2(2) TYPE C.
SELECTION-SCREEN END OF BLOCK A1.
SELECTION-SCREEN: BEGIN OF BLOCK A2 WITH FRAME TITLE TEXT-002.
PARAMETERS: ZDATE LIKE SY-DATUM DEFAULT SY-DATUM OBLIGATORY.
SELECT-OPTIONS:
TIME1 FOR SY-UZEIT OBLIGATORY.
SELECTION-SCREEN END OF BLOCK A2.
SELECTION-SCREEN: BEGIN OF BLOCK A3 WITH FRAME TITLE TEXT-003.
PARAMETERS: p_mail AS CHECKBOX DEFAULT 'X'. "X = Mail report
SELECT-OPTIONS: so_mlist FOR emailaddr.
SELECTION-SCREEN END OF BLOCK A3.
AT SELECTION-SCREEN ON FRQ2.
IF FRQ2 NE 'H' AND FRQ2 NE 'M' AND FRQ2 NE 'S'.
MESSAGE E001(Z1) WITH 'Time Unit must be H or M or S'.
ENDIF.
AT SELECTION-SCREEN ON ZDATE.
IF ZDATE < SY-DATUM.
MESSAGE E001(Z1) WITH 'Date must be greater than current date'.
ENDIF.
AT SELECTION-SCREEN ON TIME1.
IF ZDATE = SY-DATUM AND TIME1-LOW < SY-UZEIT.
MESSAGE E001(Z1) WITH 'Time must be greater than current time'.
ENDIF.
AT SELECTION-SCREEN OUTPUT.
IF JOB IS INITIAL.
JOB = NAME.
ENDIF.
$$* Start of selection
START-OF-SELECTION.
IF JOB IS INITIAL.
JOB = NAME.
ENDIF.
clear params.
call function 'GET_PRINT_PARAMETERS'
EXPORTING
mode = 'CURRENT'
no_dialog = 'X'
IMPORTING
out_parameters = params.
params-paart = 'X_PAPER'.
ZTIME = TIME1-LOW.
JOBNAME = JOB.
VARIANT = VAR.
REPORT = NAME.
AUTHCKNAM = SY-UNAME.
PARAMS-PRIMM = SPACE.
SDLSTRTDT = ZDATE.
CLEAR: ZCOUNT.
WHILE ZTIME LE TIME1-HIGH.
SDLSTRTTM = ZTIME.
CALL FUNCTION 'JOB_OPEN'
EXPORTING
JOBNAME = JOB
IMPORTING
JOBCOUNT = JOBCOUNT
EXCEPTIONS
OTHERS = 4.
CALL FUNCTION 'JOB_SUBMIT'
EXPORTING
AUTHCKNAM = AUTHCKNAM
JOBCOUNT = JOBCOUNT
JOBNAME = JOB
PRIPARAMS = PARAMS
REPORT = REPORT
VARIANT = VARIANT.
CALL FUNCTION 'JOB_CLOSE'
EXPORTING
SDLSTRTDT = SDLSTRTDT
SDLSTRTTM = SDLSTRTTM
JOBCOUNT = JOBCOUNT
JOBNAME = JOB
IMPORTING
JOB_WAS_RELEASED = RELEASED.
IF RELEASED = 'X'.
WRITE: / 'Job', JOBNAME, '(' ,JOBCOUNT, ')' ,'will run at', ZTIME,
'on', ZDATE, 'with program',NAME, 'and variant', VAR.
IF NOT P_MAIL IS INITIAL.
CLEAR OBJCONT.
CONCATENATE
'Job' JOBNAME '(' JOBCOUNT ')' 'will run at' ZTIME 'on' ZDATE
'with program' NAME 'and variant' VAR
INTO OBJCONT SEPARATED BY SPACE.
APPEND OBJCONT.
ENDIF.
ELSE.
WRITE: /
'Unable to release job', JOBNAME, '(' ,JOBCOUNT, ')' ,'at', ZTIME,
'on', ZDATE, 'with program',NAME, 'and variant', VAR.
IF NOT P_MAIL IS INITIAL.
CLEAR OBJCONT.
CONCATENATE
'Unable to release job' JOBNAME '(' JOBCOUNT ')' 'at' ZTIME
'on' ZDATE 'with program' NAME 'and variant' VAR
INTO OBJCONT SEPARATED BY SPACE.
APPEND OBJCONT.
ENDIF.
ENDIF.
CASE FRQ2.
WHEN 'H'.
ZTIME = ZTIME + ( 60 * 60 * FRQ1 ).
WHEN 'M'.
ZTIME = ZTIME + ( 60 * FRQ1 ).
WHEN 'S'.
ZTIME = ZTIME + FRQ1.
WHEN OTHERS.
ENDCASE.
ENDWHILE.
IF NOT P_MAIL IS INITIAL.
CHECK NOT SO_MLIST IS INITIAL.
PERFORM SENDEMAIL.
ENDIF.
*& Form SENDEMAIL
text
--> p1 text
<-- p2 text
FORM SENDEMAIL.
clear objcont.
append objcont.
append objcont.
concatenate
'This e-mail was sent from an automated system...' sy-sysid sy-mandt
into objcont.
append objcont.
clear objcont.
objcont = 'Do not reply to this message.'(013).
append objcont.
MOVE: SY-LANGU TO OBJECT_HD_CHANGE-OBJLA,
'NOTIFICATION' TO OBJECT_HD_CHANGE-OBJNAM,
'Report from job scheduler' TO OBJECT_HD_CHANGE-OBJDES.
MOVE 'RAW' TO OBJECT_TYPE.
describe table objtxt lines tab_lines.
read table objtxt index tab_lines.
*Now we will create the packing list entry for our text body.
describe table objtxt lines tab_lines.
read table objtxt index tab_lines.
OBJECT_HD_CHANGE-OBJLEN = tab_lines * 255.
*in this next section we create our recipient list.
LOOP AT so_mlist.
clear RECEIVERS.
move so_mlist-low to RECEIVERS-RECEXTNAM.
MOVE 'U' TO RECEIVERS-RECESC.
APPEND RECEIVERS.
if not so_mlist-high is initial.
move so_mlist-high TO RECEIVERS-RECEXTNAM.
MOVE 'U' TO RECEIVERS-RECESC.
APPEND RECEIVERS.
endif.
ENDLOOP.
CALL FUNCTION 'SO_OBJECT_SEND'
EXPORTING
OBJECT_HD_CHANGE = OBJECT_HD_CHANGE
OBJECT_TYPE = OBJECT_TYPE
TABLES
OBJCONT = OBJCONT
RECEIVERS = RECEIVERS
EXCEPTIONS
ACTIVE_USER_NOT_EXIST = 1
COMMUNICATION_FAILURE = 2
COMPONENT_NOT_AVAILABLE = 3
FOLDER_NOT_EXIST = 4
FOLDER_NO_AUTHORIZATION = 5
FORWARDER_NOT_EXIST = 6
NOTE_NOT_EXIST = 7
OBJECT_NOT_EXIST = 8
OBJECT_NOT_SENT = 9
OBJECT_NO_AUTHORIZATION = 10
OBJECT_TYPE_NOT_EXIST = 11
OPERATION_NO_AUTHORIZATION = 12
OWNER_NOT_EXIST = 13
PARAMETER_ERROR = 14
SUBSTITUTE_NOT_ACTIVE = 15
SUBSTITUTE_NOT_DEFINED = 16
SYSTEM_FAILURE = 17
TOO_MUCH_RECEIVERS = 18
USER_NOT_EXIST = 19
ORIGINATOR_NOT_EXIST = 20
X_ERROR = 21
OTHERS = 22.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " SENDEMAIL -
One field in standard datasource 2LIS_02_ITM can not be found in LBWE
Dear expert:
I have one field NOPOS of datasource 2LIS_02_ITM (Purchasing Order Item) need to find the source table.
Here my question is: NOPOS is a standard field of datasource 2LIS_02_ITM, why can I not find this field in LBWE through maintenance? Any suggestion to find the source table?
Thanks all for your time in advance~
Timeven if it is a counter field it should be present in DataSource structure as the infosource of this DataSource has mapping of this field.
Check the HELP.SAP.COM documentation for same
Regards,
Sharayu -
Number/ unit field in infotype 0015
Hi Experts,
There is a number/unit field in infotype 0015. What is the exact use of this field? Can we make payments by this field? Like if i want to pay an employee 2days extra Basic salary due to some reason, then how shd i configure my wage type so that system automatically calculate the amount by entering the number/ unit field.
plz help
regards
KunalIf i enter some number/unit, then how the system will calculate the amount for that.
Like if i want to pay an employee 1day extra salary due to some reason and i want to pay this through the Ex-gratia wage type, shd i just enter the number=1 and unit =days??
System is not paying anything for this values.
plz help
regards
kunal -
Appended field in the datasource as selection in infopackage
Hi,
I have appended a field in my datasource, say for example, country (ZZCOUNTRY). I set ZZCOUNTRY as selection in the datasource so i can filter by country in my infopackage. When i check my datasource, ZZCOUNTRY is there. But when i use it in filter, the system is ignoring it.
Example, if i load all data, i get 5 records. 1 is US, and 4 for CA. when i filter by country US and load my infopackage, i am expecting to get only 1 record, but i still get 5 records.
do you know if it's possible to use appended field as infopackage filter?
Thanks
jtiHi
if u want to enchance your datasouce u are suppose to maintain the DS in RSA6,and then enable the fields for selections.
i suppose if the fields are appended fields you can't enable those for selection.
please check if these fields are enables before u proceed.
hope this helps
--- Rashmi -
How to handle currency & unit fields in call transaction?
Hi,
Can any one tell me How to handle currency & unit fields in call transaction? & how to dael with error for this fields? whith some sort of coding.
Thanks In Advance.
PravinHi Pravin,
The same topic has been discussed in the following thread:
How to handle currency & unit fields in BDC recording method?
Regards,
Chandra Sekhar -
Logistics InfoSys: Time unit field DFZEH
Hello,
In infostructures S021, S022, S023 and S024 the time unit field DFZEH is set to DAY as SAP standard.
In IMG tc MCRG it seems to be possible to change this time unit which should be useful for short lead times and execution times(field MCPPCUST-DFZEH). Coincidence that field names are the same?
After running statistical update of S023 the unit is still DAY.
I don't see anything in the front end standard analysis that it is possible to change time unit. (This is possible for currency.)
I have tried different options but nothing gives me a result that I expect.
Does somebody know the effects of this IMG setting??
Thank you!
Best regards,
Tor Holter
Oslo, NorwayIn LIS there are fields available for the exact times but those fields are not present in the standard Inforstructure. The solution is to create new ones (it is not possible to copy certain infostructure).
These fields are part of BW/BI extract.
Maybe you are looking for
-
HELP! The App server stopped working!
Everything was fine then I started getting this when trying to run the applicaiton. Note that it keeps giving this same error message over and over until I stop the app server. I did notice that the context-root was missing in the domain.xml as menti
-
Rebel Xsi display stopped working will not take photo
I have had this camera for a few years. I took it with me and left it covered in the car (hot day) and now the display will not light up and the camera will focus on an object but will not take photo. Would heat cause the display to stop working?
-
I know that in discoverer it's very easy to ad subtotals in a matrix report. In reportsbuilder i do not find any function that can help met I've a report like this GROUP YEAR (subtotals are possible) ROW jan feb march group1 subgroup 1 subgroup 2 val
-
MAC Mini and SPDIF Optical Out
I am new to the MAC after 30 years on a PC, so there is a bit on humility involved here! LOL! I am trying to configure the the sound for SPDIF audio optical out. I see no settings in the Sound Preferences? I only have speakers and HDMI. Any help woul
-
Labview error -1907 (sound and vibration)
I am trying to measure two analog inputs(NI-PXI-4461) using daq assist on Labiew 7.1. I want to run the same code on both inputs and comparing them together on a graph. I am measuring 2 accelerometers and the most important parameters are measuring t