Units of measurement

Hi all,
Can i define diffrent order unit of measurement for the same material plant wise ?
regards,
praful

Hi,
You possibly CAN do this but it depends on what you are trying to do? If you want to use one UOM as the base unit of measure and then have a different UOM on POs, different UOM on Sales, different UOM on movements, you can use the alternative UOM field in the relevant views (The Purchasing UOM is NOT plant specific, but the ones on the "Plant Storage" views can be different for each Plant)
So you can set the Purchasing, Sales and storage location( for stock movements) to use different UOMs for each VIEW, but the Plant Storage view stores the UOM on MARC and so can be different at each plant.
Did you want to use different UOMs on POs, Movements or sales.
Steve B

Similar Messages

Error while defining alt unit of measurement in material master

All SAP gurus,
i am trying to define a alt unit of measurement in a finished material, the base unit of measurement is in MT, and the sales unit is nos. the conversion formula is 53 nos = 1kg i.e. 1MT = 53000 nos. as conversion can be done only with base unit of measurement i am giving 53000 nos = 1 MT, but system unable to calculate the conversion as it is not taking mere than 3 digit after decimal.
e.g. if 53000 nos = 1 MT
then 1 nos should be = 0.000018 MT
but system not taking this value as this value contain 6 digit after decimal
suggest me what can be the way out? with detailed steps. can i increase the post decimal value or i have to define another middle alt unit of measurement (like KG). and if that is to be done then how.
Regards
BKR

Hi,
With help of Basis team check the decimal places for u r user ID.
In t-code SU01 >>> Under Default tab
Kapil

Error message 'Enter unit of measure' in Webclient

Hello Experts,
We are working on CRM 5.0 SP 7, IC WebClient and have implemented the BAdi "CRM_SERVICEPROD_BADI" to assign a service product ''INVESTIGATION' whenever user selects service ticket in WebClient.
However, when confirming a Business Partner and accessing the service ticket, an error is getting displayed stating "Enter the unit of measure".
We have already mentioned the unit of measure in Product but it seems it is not picking from there.
Please help me to remove this error.
Reward points assured for useful answers.
Regards,
Amit

hi
I had a similar Problem
You will have to assign the base unit of measure in service tab as hours and then in the sales and distribution tab assign the same unit in the sales unit and give minimum order quantity(for e.g-1) & delivery unit ,this you will have to do for all the sales areas you might have mapped in the S&D tab
I'm sure the issue will be resolved
Cheers!!
Regards
Shankar Raj

How to retrieve the values from a table if they differ in Unit of Measure

How to retrieve the values from a table if they differ in Unit of Measure?

If no data is read
- Insure that you use internal code in SELECT statement, check via SE16 desactivating conversion exit on table T006A. ([ref|http://help.sap.com/saphelp_nw70/helpdata/en/2a/fa0122493111d182b70000e829fbfe/frameset.htm])
If no quanity in result internal table
- There is no adqntp field in the internal table, so no quantity is copied in itab ([ref|http://help.sap.com /abapdocu_70/en/ABAPINTO_CLAUSE.htm#&ABAP_ALTERNATIVE_1@1@]).
- - Remove the CORRESPONDING, so quantity will fill the first field adqntp1. ([ref|http://help.sap.com/abapdocu_70/en/ABENOPEN_SQL_WA.htm])
- - Then loop at the internal table and move the quantity when necessary to the 2 other fields.
* Fill the internal table
SELECT msehi adqntp
INTO TABLE internal table
FROM lipso2
WHERE vbeln = wrk_doc1
 AND msehi IN ('KL','K15','MT').
* If required move the read quantity in the appropriate column.
LOOP AT internal_table ASSIGNING <fs>.
CASE <fs>-msehi.
 WHEN 'K15'.
 <fs>-adqnt2 = <fs>-adqnt1.
 CLEAR <fs>-adqnt1.
 WHEN 'MT'.
 <fs>-adqnt3 = <fs>-adqnt1.
 CLEAR <fs>-adqnt1.
ENDCASE.
ENDLOOP.
- You could also create another table with only fields msehi and adqntp and then collect ([ref|http://help.sap.com/abapdocu_70/en/ABAPCOLLECT.htm]) the data to another table.
Regards,
Raymond

Production Order for a Material with two units of measure?

Hi Everybody I have the following issue.
In my company there is a new production process with a Material that should be configured in the master data with the field "Base Unit of Measure" as per unit (each). But the production process, should be confirmed by tx CO11N, in Kilograms. I know that I can use the additional Data in tx MM03 to set a Production Unit, but the value of convertion would be fixed. For example 122 Kg = 1 each, the thing is that the value in kilograms for each lot can vary, one lot can weight 122 and another one can weghr 125, and in each case I shoul have two units in stock. And as I have the value of convertion fixed, when I confirm each lot one for 122 kg and another for 125 kg I will have 2.025 units in MB52.
How can I solve this problems? I need to have the chance the confirm in kg changing for each lote the quantity but in the base Unit of Measure have one unit for lot. As if for tx CO11N I could have a field where I can set tha x quantity of Kilograms is x each.
Kind regards
Leandro.

Hi Ayoub, First thank`s for your promt answer,
1. The Quantity is different, because is not a perfect process, there is a manual work in the process that makes this quantity differ, there is no big difference, maybe a Kilo or Two but the production mannager wants to have this registered. And besides in productions they manage kilograms, but for selling the comercials manage units (each - EA)
2.The convertion rate is known at the end of the process after cutting and packaging a unit, they weight it.
Regards
Leandro

Standard report for unit of measures

Is there any standard report to see the Fert material unit of measures and its alternate unit of measures.

HI
there is no standard reprot for you requirment.
only UOM of material you canget from MM60.
but if you want alternate also got with table data MARM
1.use SE16-- enter the table name MARM
2.enter the material(field MATNR), and execute you get the report
-ashok

Report for Units of measurement for Material

Hi
Is there any report to extract the alterante unit of measurements for materials in a plant.
Thanks

Hi,
Please use the below table,
Related to Materials:
MARA - Material Master: General data
MAKT - Material Master: Description
*MARM - Material Master: Unit of Measure*
MAPE - Material master: Export control file
MARC - Material master: Plant data
MARD - Material master: Storage location
MAST - Material link to BOM
MBEW - Material valuation
MLGN u2013 Material Master: WM Inventory
MLGT u2013 Material Master: WM Inventory type
MDIP - Material: MRP profiles (field contents)
MKOP - Consignment price segment (old versions of SAP)
EBEW - Valuation of sales order stock
QBEW - Valuation of project stock
MVER u2013 Material Master: Consumption <Plant>
DVER u2013 Material Master: Consumption <MRP Area>
MVKE u2013 Material Master: Sales <Sales Org, Distr Ch>
MLAN - Material Master: Tax indicator
MARC - Material Master: Plant data
MAPR u2013 Material Master: Forecast
MARD u2013 Material Master: Storage Location
MCH1 u2013 Material Master: X Plant Batches
MCHA u2013 Material Master: Batches
MCHB u2013 Material Master: Batch Stock
MDMA - MRP Area data
DBVM - MRP Planning File Entry: MRP Area
MOFF - Outstanding Material Master Records (Maintenance status)
MARCH - Material Master C Segment: History
MARDH - Material Master Storage Location Segment: History
MBEWH - Material Valuation: History
MCHBH - Batch Stocks: History
MKOLH - Special Stocks from Vendor: History
MSCAH - Sales Order Stock at Vendor: History
MSKAH - Sales Order Stock: History
MSKUH - Special Stocks at Customer: History
MSLBH - Special Stocks at Vendor: History
MSPRH - Project Stock: History
MSSAH - Total Sales Order Stocks: History
MSSQH - Total Project Stocks: History
Regards,
Mohd Ali.

T006-Decan change after users have used the TO unit of measure

Currently in our system for TO (tonnes) it has T006-Andec as 3 and T006-Decan as 0 and it issues the users a warning message "Order quantity violates rounding rule" if they type in decimals in the purchase order quantity. We have been asked to change T006-Decan to a 3 and do away with the warning message. What happens if you change T006-Decan from 0 to 3 after users have already used the unit of measure (TO) in the R/3 SAP_APPL 470 system on materials, purchase orders, sales documents, receipts, etc...? I don't want to impact our users in production since I do not where this unit of measure has been used. Any advice is welcomed. Thank you.

Hi
If you are changing the decimal places in T006 - DECAN , the number which was 1000 would show as 1,000... so previously it was 1000 tonnes now it will show as 1 tonne.... such things happen....Check with SAP before doing changes to the Standard UOM's...
I am not able to find the correct SAP note for this.... but its there hope you get it
Thanks & Regards
Kishore

Follow up material with different base unit of measure

Hi all,
I have the BOM with material Mat1 as a component. The base unit of measure of Mat1 is KG.
Is it possible to replace Mat1 with Mat 2 material in MRP once the Mat1 warehouse stock is depleted.
The base unit of measure of Mat 2 is KGK.
The required quantity of MAT1 should be recalculated from KG to KGK accordanly unit ratio.
Please, expain, where does it maintain?
Thanks,
Peter

Hello Peter,
You can use follow-up setting (set Mat2 as follow-up of Mat1 in MRP 4 view of material master if this follow-up scenario is valid for all BOM) with discontinuation indicator '1', w/o effective-out date. In this case Mat1's stock will run out (no PldOrd, PR, etc) will be created, and from the date, when Mat1's stock runs out, MRP will calculate with Mat2.
As I told you, according to my best knowledge, you cannot realize this with different base unit of measures. (you have to change the buom of one of the related material masters or create a new material master if you cannot cope with buom-change).
Follow-up group scenario can also be used but I guess different buoms will be a problem in that case as well.
Maybe there are better solution but I'm not aware of it...
BR
Csaba

Report on material code, description and all unit of measure conversions

report on material code, description and all unit of measure conversions ?
any ideas?

Material Number MATNR
with this key and SPRAS (the desired Language key)
from MAKT you can get the descriptions..
and with MATNR from MARM you can get alternative UOM and the conversion rates.
If you need help on MARM how to get the conversions please notify.
Hope it helped
Please reward if found useful
Best Regards

MB5B - Stock on posting date show in other Unit of measure

Dearl All,
Pls support me this case: I would like to see this report (MB5B - Stock on posting date) in other Unit of measure.
This report shows stock in Basic Unit only.
E.g
Material A, base unit = M, other unit = ROL
Report needs show stock in ROL.
How can I do that?
Thank you vry much!
Cao Huy.

Hi,
In your case, order unit as ROL and material basic unit of measure is M.
PO created only for the order unit ROL, and goods have received from the vendor based on the PO order unit.
So,this MB5B stock on posting date is displayed only the total stock received based on the received GR order unit qty .
stock also managed only ROL unit of measues. it is not possible to list based on the M stock unit.
Regards,
thiru

Sub:Stock report with sales unit of measurement - reg.,

Hi guru's
we have a requirement to have the stock report with sales unit of measure instead of base unit of measure can anybody guide me how to do this.
thanks in advance
tulja singh.

From std. , I think your requirement can not satisfied.
Make customized report.
Take the help of ABAPER.

AffineTransform - Is there a way to glean units of measurement for pixels?

Assuming I get a pointer to a java.awt.geom.AffineTransform from:
java.awt.geom.AffineTransform CurTransform = ((java.awt.Graphics2D)this.getMainFrame().getGraphics()).getDeviceConfiguration().getDefaultTransform();
Assuming I've gotten the right AffineTransform... How do I get, or can I get, the scaling factor between horizontal pixels and vertical pixels for the current screen (or whatever device). In other words I want to place components... buttons, textboxes, etc. in a dialog box so that they are "square". i.e. 10 units in x look on the screen equal to 10 units in y.
Once I know what the "square pixel scale factor" is I can then worry about making the units relative to whatever font size.
This question is usually posed as "How do I get dialog units?". I haven't done that because of the "legacy problems" associated with what most people think dialog units come from. It is true that way back when dialog units were derived from a textmetrics ONLY, but unless I'm mistaken, Charles Petzold, was describing something that could only be gotten that way at that time (circa 1990).... The width of the fixed system font by the height of the fixed system font ended up being as close to a unit that was 8 units high looked like 8 units wide in the screen. The object of the exercise is to most importantly get units of measurement that translate to pixels and look "square" on the screen. Secondarily, but not unimportant, is to be a unit that has some relevance to the current font size. It's been a long time dialog units in windows maybe a 2:1 ratio. I made my own cDialogUnits so long ago I can't remember what the "standard windows" dialog unit is. In windows I can very easily get the screen dpi x and y, I think it's a devicecontext but Java's "devicecontext" only gives one dimension of the dpi?
Also this query is mute if I was "painting" on a device. The units are for pixels NOT points and are (mostly) for placing controls on the screen. I am aware of and have used the various addPreferredGap and setAutoCreateContainerGaps available in a GroupLayout... Great gizmos but, still dialog units would be very handy for setting the prefered width of a textbox/label with too much text. (Note: dialog units are NOT for calculating the height of text... )
I did search the sun forums for an answer first... It might be here I just didn't find it. It seems to be a question either avoided like the plague or considered a dumb question in Java.

This might be OK?
BE AWARE!! This is NOT a painting gizmo. It is used in conjunction with the Layout gizmos. It drives me crazy that the Layout gizmos have "default" gaps and spacers of some kind and yet ALL the tutorials immediately and unabashedly trash any "device independence" by mixing in pixel measurements... Not to mention I don't like the size of the gaps and spacing provided with the Layout gizmos anyway.
Does anyone know if this will fail? I am aware of the caveats provided... "Information about the device is only as good as has been provided." However if there is bad information in the device info I doubt using these units will do anything much different that the end user experiences with the errant device anyway.
AGAIN... This is NOT a painting gizmo. It's a helper when Laying out controls usually in conjunction with a Layout and only for spaces and gaps.
public class DialogUnits
    private double m_x;
    private double m_y;
    public DialogUnits( java.awt.Graphics2D g2 )
        java.awt.GraphicsConfiguration gc = g2.getDeviceConfiguration();
        java.awt.geom.AffineTransform at = gc.getDefaultTransform();
        at.concatenate( gc.getNormalizingTransform() );
        double fs = g2.getFont().getSize2D();
        m_x = at.getScaleX() * fs;
        m_y = at.getScaleY() * fs;
    public int CalcX( double units )
        return (int)Math.round( ( units * m_x ) / 8.0 );
    public int CalcY( double units )
        return (int)Math.round( ( units * m_y ) / 8.0 );
    public int ContainerGapX()
        return this.CalcX( 8.0 );
    public int ContainerGapY()
        return this.CalcY( 8.0 );
    public int FontSize2dX( int crude_columns )
        return (int)Math.round( crude_columns * m_x );
    public int FontSize2dY( int crude_rows )
        return (int)Math.round( crude_line_height * m_y );
    public int X( int units )
        return this.CalcX( units );
    public int Y( int units )
        return this.CalcY( units );
    } // end of class DialogUnits

Unit of Measure in a Flat File

Hi,
I have mapped the following in transformations:
MEINH (Unit of Measure) & MEGBTR (Total Quantity) -
> 0QUANTITY
Now i need to load a flat file into that Cube. The Flat file is populated with quantity under 0QUANTITY. How do i bring in the unit of measure in this case (since i did not map MEINH to 0BASE_UOM but rather 0QUANTITY)?
Thanks

Hi,
I t will not be a problem but any way u r defining two fields at datasource level so up to that (means psa ) the data will come as two fields ,now from psa to target u r transformations will occer here both the qty and unit u r assing to quantity so at report level(or target level) the data will be along with it s unit.
Thanks & Regards
sathish

Error message "Enter the unit of measure" in WebClient ???

Hello Experts,
We are working on CRM 5.0 SP 7, IC WebClient and have implemented the BAdi "CRM_SERVICEPROD_BADI" to assign a service product ''INVESTIGATION' whenever user selects service ticket in WebClient.
However, when confirming a Business Partner and accessing the service ticket, an error is getting displayed stating "Enter the unit of measure".
We have already mentioned the unit of measure in Product but it seems it is not picking from there.
Please help me to remove this error.
Reward points assured for useful answers.
Regards,
Amit

Hi Amit
Gerhard is 100% correct. Please make sure that your unit of measures are maintained on the product master(trans COMMPR01).
Use the code below in CRM_PRODUCT_I_BADI to set uom.
if cs_product_i_badi-process_qty_unit is initial.
    cs_product_i_badi-process_qty_unit = 'EA'.
    cs_product_i_badi-process_qty_num = 1.
    cs_product_i_badi-process_qty_den = 1.
endif.
Also, you will find you get error to specify product quantity. This can be done in badi CRM_SCHEDLIN_BADI with code below.
if is_schedlin_wrk-quantity is initial.
   cs_schedlin_badi-quantity = 1.
endif.
Regards
johan.

Error while creating PO -- Unit of measure not defined for lanuage ZH

Hi all,
i have created the PR with EA as UOM. Then while creating PO, i am getting error like
' Unit of measure not defined for lanuage ZH' .
Then I execute CUNI
Then menu is GOTO > Translation > units of measure
enter source language and target language . After this i am getting the below message
---> Language not available on server
Please suggest what i should do. Thanks.
Thanks
pabi

HI Pabi,
Go to material master for material in purchase requisition, the Go to Additional data and maintained language as ZH in material master data.
Also the other possibility, that if in your case purchase requisition are converted to purchase orders through background jobs,
then check the background job execution in SM37 whether that background job has been triggered twice parellely in the background, which could have resulted in locking of same purchase requisition at same time and hence your are getting the Error.
Br,
Tushar

Units of measurement

Similar Messages

Maybe you are looking for