Unity 4.2 to Connection 8.5 Prompt Change on Messages Button?
Connection 8.5 pressing messages button on 7900 I hear “Enter your PIN followed by #”, whereas Unity 4.2 said “Enter your Password followed by #”.
Can I change this Connection Prompt back to Unity 4.2 prompt somehow? Customer is upset about the change. End users were calling Helpdesk asking what a PIN is and how can they enter their old Password.......while I found it humerous the customer is not laughing.
I m not totally sure but all the prompts are in this directory so you may want to check
Cisco Unity Connection\TuiResources\Prompts directories and subdirectories.
http://www.cisco.com/en/US/docs/voice_ip_comm/connection/1x/administration/guide/acm090.html
Similar Messages
-
my Ipad will not connect with Itunes prompt states this Ipad cannot connect because the Apple mobile device service has not started "??s "
Try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc. -
Every time I plug in my iPhone to my computer it opens up to my PC instead of iTunes. When I try to connect my phone to iTunes the device button doesn't appear. What do I do?
It is opening up your computer generally because there are photos in the camera roll to prompt you to import them to the computer as you would a digital camera.
To correct the issue with the iPhone not being recognized in iTunes, see this support document. http://support.apple.com/kb/TS1538 -
CUE: disable prompt "Record your message after the tone."
I would like to disable the prompt: "Record your message after the tone. When you are finished, hang up or press # for more options."
I found the „no voicemail conversation caller recording-prompt“ command, but it doesen’t seem to work.
Is this command supported on an UC540?
Regards
Stefan...From exec mode, use the command
Router# Service-module i0/0 session
You will be connected to the Cue console
Enter your username and password (same as the credentials you used to access the CLI)
Once logged in, press enter to display the cue console (it's waiting for input, so pressing enter re-displays the command line)
Enter configuration mode (conf t), type the command, issue a copy run start to save, then type exit to return to the IOS CLI -
i have an ipod touch 5th gen and when connected to itunes i get a message saying itunes was unable to load data class information from sync services. reconnect or try again later. anyone got any ideas? i've tried most things on most forums but still no joy
Try here:
iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert
If not successful see the previous discussion on the right side of this page with the green checkmark. -
I have apple iPhone 4S upgraded to iOS 6.0.1 and everything was working fine suddenly my Wifi was not connecting and found the wifi on/off button is greyed out and to enable it I tried all resets but still my problem have not solved, still wifi is off
Same here.... No fix. Replacing is the option apparently and if you're out of warranty, you're SOL. That was as per the "Genius" at Apple.
-
My just bought ipad with retinal display 32G, screen frozen at one of game my son play. Now I can't turn off ipad, I can log in ipad. I connect ipad to my apple computer, message say I need to unlock the ipad, the problem is I can't even get to ipad home screen to unlock or enter the password. Basically, my ipad is dead. I can't even know what my series number etc. Please help!
Thanks!Try a reset:
Hold the Sleep and Home button down until you see the Apple logo. -
Sorry about the long title.....its my first post.
My kid just got a brand new iPod 5th generation (today from Santa) and it won't power up or charge. The only response is when I connect the USB and press the power button or front button the Battery appears with red line on left and lightning symbol below. There is no other response at all no matter what I do, including holding both buttons down for extended period. My other kid got one and it works perfectly.....I have interchanged usb cables ports etc. but still no response....I would really appreciate any help.Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Make an appointment at the Genius Bar of an Apple store since you have a hardware problem with the iPod. This is because as you said the same cable works with another iPod.
Apple Retail Store - Genius Bar -
My iPod Touvh 4th Generation won't turn on. It will not charge even after I used a few chargers and will not connect to a computer. The Home button is broken and I don't know if the Lock/Sleep button is now broken or stuck as well. I believe there may be a problem with the battery or the backlight. I've had my screen replaced once by some stooges. What should I do?
Try:
- iOS: Not responding or does not turn on
When it says place the iPod in recoverymode use one of these programs.
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
and
RecBoot tip
For MAC or PC
The Firmware Umbrella - TinyUmbrella
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I have a problem with my bookmarks, cookies, history or settings
Description
When i exit, mozilla will prompt me a message asked if i would like to save my tabs(i have 13 tabs opened).
may i ask, where does all those 13 tabs (web addresses/links) stored in mozilla, or in which file that i can locate in mozilla's folder? I need a solution that i can find/copy down that 13 web addresses without needed to open mozilla browser.
YOUR ATTENTION TO ABOVE MATTER IS VERY MUCH APPRECIATED!
PLEASE HELP!
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.0; SLCC1; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729)Please see '''sessionstore.js''' in your Firefox profile directory, the location of which is described in the [[Profiles]] knowledge base article. This file can be viewed in a readable format using the [https://addons.mozilla.org/en-US/firefox/addon/10869/ JSONView] add-on.
-
when i connect my iphone 4,an error message saying usb device is malfunctioning is appearing...can anyone give me a solution for this?i tried using on a different pc.but still get the same result..
First thing i would try is to use another cable if available.
-
since i have updated to IOS 7.1 my phone no longer can make calls, connect using 3G or send text messages. has anyone else had this trouble? i've tried resetting the phone, but had no luck. i can recieve calls and texts, but cannot make calls, text or use the 3G.
please can anyone help?Yes! All the above. I have to buy a new phone. I contacted my phone company and there is nothing they can do
-
When connecting my iphone to my computer, message appears: iphone cannot be used because itunes needs to be updated. I updated on my Mac, but it isn't transferring to my phone. Tried looking at software updates on my phone - "no updates needed"
Okay, that means with the latest iOS software, it requires the latest version of iTunes on the computer. Which computer OS platform are you using. Now you are saying that after downloading the latest version of iTunes that your iPhone is not being recognized by iTunes? Completely different thing, and the iTunes on the iPhone has nothing to do with that anyway. The iTunes on the iPhone is just for purchases.
If you are having trouble with the iPhone being recognized by iTunes, use the appropriate link for your computer OS for assistance.
Windows: http://support.apple.com/kb/TS1538
OS X: http://support.apple.com/kb/TS1591 -
My iphone4s does not turn on,when I connect to power ,it shows the message "connect to itunes" but when I connect to iTunes,my pc does not detect my phone,so iTunes does not detect my iPhone.
Are you running the most recent version of iTunes for Windows on your PC? You may be running an older version that is incompatible with the 4s.
Hope this helps -
Hi,
For no apparent reason my phone stopped working...so I did a reset and got the message 'Restore Needed'. I connected to iTunes and got this message: 'iTunes could not connect to the iPhone because it is locked with a passcode. You must enter your passcode on your iPhone before it can be used with iTunes'.
The problem is, I can't enter my passcode because I'm not given that option on the iPhone. All I seem to be able to do is make an emergency call.
It's been working fine otherwise. Any suggestions?
This is the SECOND replacement iPhone I've had this week and I'm getting a bit fed up.
Thanks in advance for any help,Are you referring to the 4 digit passcode needed to enter the phone and use it's features?
If so reboot your iPhone and enter the passcode to get it operational. Launch Image Capture on the Mac and connect the iPhone. Now you should be able to download the video files to wherever you want on your hard drive.
OT
Maybe you are looking for
-
RMAN (DP6.0) backup failure on Oracle10g
Hello, I am using DP6.0 with Oracle10g environment for backup. While I was able to successfully able to allocate the channels I am getting the below error message stack when the backup script is executed. Thanks RMAN> CONNECT TARGET * 2> run { 3> all
-
Hi all, I have an RMI server and a number of clients that run on different machines. What I need to do is, implement the "observer" pattern. i.e. in my case, not only the clients call the server, but also the server must notify the registered clients
-
Flash Movie Closing - leaving "sub" movies running
I'm not a Flash guy, but have an app to maintain which has a Flash front end. There is a main movie - background.swf and it loads a bunch of "sub" movies - mainly graphs and other panels of information. Something is sometimes causing the main movie -
-
Problem viewing .mid files in Score Editor
Help please! Used Finale several years ago before I upgraded to OS 10 and Logic 7.2 Express. I recently opened one of my .mid files from Finale and it played back fine but when I tried to see the score in the Score Editor it was altered and only some
-
Role based reflection security manager?
Hi, I am trying to find out whether there is a possibility to implement a role based Security Manager to control access to reflection operations (such as checkMemberAccess() for example). I need to implement an application where using reflection is t