Unity 7 Backup Subscriber Server - Live Reply not working
Hi we have two Unity 7 servers, one Primary and 2nd Backup Subscriber Server.
Live Reply is not working when the Unity Primary Server fall onto the Backup Server.
Do anyone have an idea or an solution form me?
On both Servers:
Unity Version: 7.0(2.0)
Patch installed: CU7.0(2)_ES34
Exchange 2007
Many Thank,
Nico
Hello,
I am looking at the guide for this and found the following:
http://www.cisco.com/en/US/partner/docs/voice_ip_comm/unity/5x/networking/guide/ex/5xcunet030e.html#wp1050502
Enabling Cross-Server Live Reply and Entering the Pilot Numbers of Destination Cisco Unity Servers
Do the following procedure on each Cisco Unity server in the dialing domain. If the system is using failover, do the following procedure on both the primary and secondary server, because most of the settings on the Network > Dialing Domain Options page are stored in the registry. (Registry settings are not replicated to the secondary server.)
To Enable Cross-Server Live Reply and to Enter the Pilot Numbers of Destination Cisco Unity Servers
You might just verify this has been done on the Secondary also.
Thanks,
Scott
Similar Messages
-
Testing Server / 'Live View' not working
Hey guys, I'm trying to create my first e-Commerce site in Business Catalyst and having a bit of an issue with setting up testing. I've downloaded multiple basic templates from 'BC' and they all seem to be giving me the same issue.
Issue:
When using Dreamweaver CC's 'Live View' (which seems to be a one stop shop for testing changes without them pusing to the live site) the encompassing template in a page is displayed correctly, but the content area always displays 'Page not Found'. Take a look at the attached image to see exactly what I mean.
I've contacted support and browsed the form, but it seems I am the only one with this issue. Again I've tried it with multiple templates on multiple computers. Am I missing something simple? What does everyone else use for testing? Please help.Hi,
When you press the "Live" button in Dw, it asks you if you want to save the file before putting. If you select No, and there's also NO such file on the server, then you'll have the "Page not found" message displayed.
Hope this helps.
Kind Regards,
Alex -
how come when i make a web site and i test it in my local server it works fine when i tranfer to server certain things do not work example i used javascript to put in a prompt bar for a newsletter page at the server it did not work but at local it did also it works at MOZZILLA but not internet explorer i also have cs4 was wondering if there is a way to test a page in dreamweaver and then transfer THANK YOU X-FACTOR-MEDIA
In future, please try to make the subject line of your posts shorter. In this case the following would have been sufficient: "JavaScript works locally, but not on remote server".
Short, but meaningful subject lines make it easier for others to identify what your question is about, and often bring faster help. -
I backed up my Iphone to itunes so i can do the new Update to IOs 7 and so now that i updated it i want to backup and restore and its not working, Please help!
An iPhone backup to a computer via iTunes stores the photos in a backup file that is only meant to be be used if needed to restore back to the phone. There is 3rd party "extractor" software available but otherwise the photos are not directly viewable.
The backup via iTunes was a good idea and your Camera Roll photos should be there and should be able to be restored to your new phone. However if it was me I wouldn't rely on that alone. I would also import the photos to a computer where you can see and verify that you have a copy. That is a good idea at any time (not just when you know you might need it). Any phone can be lost, broken, suffer hardware issues, etc at any time and lose all data on it. Following is a link with information on how to import the photos to a computer: Import photos and videos from your iPhone, iPad, or iPod touch to your Mac or Windows PC - Apple Support -
In the context of restoring a drive from a backup, i copied /etc/sudoers from my backup. Now it does not work due to the permissions not being correct (even though it was copied via sudo cp -rp)
Most likely you have Office 2004 which are PPC-only applications and will not work in Lion. Upgrade to Office 2011. Other alternatives are:
Apple's iWork suite (Pages, Numbers, and Keynote.)
Open Office (Office 2007-like suite compatible with OS X.)
NeoOffice (similar to Open Office.)
LibreOffice (a new direction for the Open Office suite.) -
Lion Server DNS service not working for locally created zones. Caching working fine.
OS Lion Server DNS service not working for local zones. Was fine under Snow leopard server but Lion server upgrade has severely broken my DNS and web sites. Zones look fine under Server Admin but keep getting "query failed (SERVFAIL) for xxxx at /SourceCache/bind9/bind9-42/bind9/bin/named/query.c:3921" in the logs. BTW - Server Admin cant seem to see the log file either.
Surely someone actually tested that DNS still worked on Lion?I upgraded from Snow Leopard Server to Lion Server on day 01. I hit the same issue where, after the upgrade, my Lion Server stopped serving names for my private local domain.
I finally took a few minutes to figure out what was wrong. After turning on debug logging and looking through the logs, I found my particular issue, now resolved.
The issue I had was, when the domain initially was setup when I installed Snow Leopard Server, for some reason it created a zone just for the server (in my case, something like zone "s-01.mydomain.priv"), and a separate zone for all the other machines (zone "mydomain.priv", containing all the private IPs for my local domain). I never messed with it because it worked, but generally I would have put all of them in the same zone.
My zone "mydomain.priv" had a nameserver and mail exchanger entry for my server, s-01.mydomain.priv. I could see this in the Server Admin app on the DNS bubble, Zones tab, mydomain.priv selected, and the General Info panel. This was fine in Snow Leopard. This was failing the zone load in the updated bind for Lion Server, though. The issue was that the "mydomain.priv" zone was referencing the s-01.mydomain.priv server, which was not defined in the "mydomain.priv" zone but rather in the "s-01.mydomain.priv" zone.
My fix:
1. In Server Admin, add the server to the zone "mydomain.priv". I put an A record (Add Machine) in the "mydomain.priv" zone for my server named s-01.mydomain.priv.
2. shut down DNS on the OS X Lion Server (hit the Stop DNS button on Server Admin).
3. edit /etc/named.conf by hand, removing the specialized zones that contianed just the server. In this case, it would be the section titled 'zone "s-01.mydomain.priv"' and the section titled 'zone "3.10.1.10.in-addr.arpa"'. Your in-addr.arpa zone name will change based on whatever your server IP address was. My internal one happened to have s-01.mydomain.priv mapped to 10.1.10.3.
4. Once the specialized zones for just the server were removed, I started the DNS up again. Instead of serving four zones as it had in OS X Snow Leopard Server, it now servers two zones. And, now, it is resolving my local machines for the mydomain.priv zone.
YMMV. I did note that it wasn't totally necessary to do step 3, but I never really understood the need for the specialized domain, and keeping it around would have a copy of data that would just confuse things.
Hope that helps. That's been the only hiccup I've noticed updating to OS X Lion Server thus far. -
MOVED: MSI Live Update not working Windows XP Professional 64bit Edition!!!
This topic has been moved to Operating Systems.
MSI Live Update not working Windows XP Professional 64bit Edition!!!Thank you so much. I just want to say I really appreciate when people do take the time to post me in return. So I really mean it, Thank You.
A quick question. You see, I have been upgrading my computer. I installed a Belkin USB USB Card (high speed 2.0) cause I needed more USB ports. Then I checked for compatable RAM and upgraded my RAM from 512MB to 2Gigs. Everything alright.
Now, I have checked for processors that are compatable with my board K9VGM-V (MS-7253). And MSI's chart says mine is compatable with the AMD Athlon 2x 6000 (3.0Ghz) *IF* I use the 89 watt and not the 125 watt. Here is a good URL for the processor details I found:
http://www.cpu-world.com/CPUs/K8/AMD-Athlon%2064%20X2%206000+%20-%20ADA6000IAA6CZ%20(ADA6000CZBOX).html
Now do you have any tips and I will probably have to flash to BIOS for sure after this upgrade won't I? -
RMAN backup for TDPO without catalog not working
Hi all,
We have configured IBM tivoli storage for Oracle backup(using RMAN).We did not configure Recovery catalog. Will tivoli support to keep the backups in tape without a catalog?
OS : IBM AIX 5.3
Database Version : 10.2.0.4
Tivoli client version : 5.5.0.0
Tivoli server version : 5.5.4.0
oracle API : 5.4.1.0
Regards.Hi Rajesh,
Thanks for the reply.The script contains the controlfile autobackup option.I have deleted the SBT tape's old backups using RMAN. But the volume space not reduced. This is the script we are using for backup.
run
configure controlfile autobackup on;
crosscheck archivelog all;
allocate channel t1 type 'sbt_tape' parms 'ENV=(TDPO_OPTFILE=/usr/tivoli/tsm/cli
ent/oracle/bin64/tdpo.opt)';
#allocate channel t2 type 'sbt_tape' parms 'ENV=(TDPO_OPTFILE=/usr/tivoli/tsm/cl
ient/oracle/bin64/tdpo.opt)';
CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 7 DAYS;
backup incremental level 1
filesperset 25
format 'full_%d.%t.bkp'
database;
backup
format 'arch_%d.%t.bkp'
archivelog all;
release channel t1;
regards. -
Form created in Muse now live and not working
I would greatly appreciate some assistance (and fast as my project is live and not functioning). Basically, I created and edited a nice website with a form in Muse, then published to BC to chop it into code, then Ftp'd the files to myself and then over to the client's servers. Everything looks great, except the form I added is not functioning. Muse chat support has told me:
Surjeet: It is automatically integrate with BC when published on BC
Surjeet: But if you want to host it on other servers then you have to make some changes on the onclick of the form.
However, he couldn't tell me what changes need to be made because
Surjeet: Unfortunately, HTML / CSS / JavaScript and Site implementation related issues are outside the scope of our support boundaries.
Then he tell me that
Surjeet: The webForm will be functionable only when published on BC.
AAACK! I really need help. Adobe shouldn't allow you to add a form if it is not going to work on client servers - they are touting this product as for designers with no tech knowledge.
Can anyone please please tell me what code or ? on the form needs to be changed, added, deleted, etc. to get it to function on my client's server? Project is due today!
Thank you in advance!Link
Cant help without a link.
You may have modified the form to knock off severl things to make it work correctly. -
ACE in Direct Server Return mode not working as expected
Dear all,
I configured my ACE as I found it here:
https://supportforums.cisco.com/docs/DOC-22555
the VIP is working, that means I can ping it, routing is working etc.
I created a loopback on the win2012 Server with the IP of the VIP. When I try now to test the LB with telnet on port 25 e.g. it is not working. direclty on the server it works, also in my last deployment where I use SNAT/PAT. But we want the real client IPs visible on the Exchange Server.
Where is my problem ? Any ideas would be great..
rserver host YY
description AServer-1
ip address 10.1.x.2
inservice
rserver host XX
description AServer-2
ip address 10.1.x.3
inservice
serverfarm host Mail
description Mail
transparent
predictor leastconns
rserver AServer-1
inservice
rserver AServer-2
sticky ip-netmask 255.255.255.255 address both Mail
timeout 5
replicate sticky
serverfarm Mail
class-map match-all Exchange_ALL
2 match virtual-address 192.168.1.1 any
class-map type management match-any remote_access
2 match protocol xml-https source-address 10.a.b.0 255.255.255.0
3 match protocol icmp source-address 10.a.b.0 255.255.255.0
5 match protocol ssh source-address 10.a.b.0 255.255.255.0
7 match protocol https source-address 10.a.b.0 255.255.255.0
8 match protocol snmp source-address 10.a.b.0 255.255.255.0
9 match protocol xml-https source-address 10.d.e.1 255.255.255.255
10 match protocol icmp source-address 10.d.e.1 255.255.255.255
11 match protocol ssh source-address 10.d.e.1 255.255.255.255
12 match protocol https source-address 10.d.e.1 255.255.255.255
13 match protocol snmp source-address 10.d.e.1 255.255.255.255
policy-map type management first-match remote_mgmt_allow_policy
class remote_access
permit
policy-map type loadbalance first-match mail
class class-default
sticky-serverfarm Mail
policy-map multi-match VLAN20
class Exchange_ALL
loadbalance vip inservice
loadbalance policy mail
loadbalance vip icmp-reply
interface vlan 2
ip address 10.a.b.2 255.255.255.0
access-group input ALL
service-policy input remote_mgmt_allow_policy
no shutdown
interface vlan 20
description Server
ip address 10.1.x.20 255.255.255.0
peer ip address 10.1.x.30 255.255.255.0
no normalization
access-group input ALL
service-policy input VLAN20
no shutdown
ft interface vlan 4
ip address 10.f.g.2 255.255.255.252
peer ip address 10.f.g.1 255.255.255.252
no shutdown
ft peer 1
heartbeat interval 300
heartbeat count 10
ft-interface vlan 4
ft group 1
peer 1
associate-context Admin
inservice
ip route 10.d.e.0 255.255.255.255 10.1.x.1
ip route 0.0.0.0 0.0.0.0 10.a.b.1Oh, I see. Very interesting indeed!
Do you get the BAD CHECKSUM and IP CHECKSUM OFFLOAD on the remote sites?
It could be this that is the problem. I read this and it seems as though it causes disconnects just as you experience too.
or just disable - it worked for some here, but for others, they upgraded the drivers of the NIC:
http://www.techsupportforum.com/forums/f137/wireshark-question-tcp-checksum-offload-248812.html
1. Open Device manager (right click "Computer" and click "Manage")
2. Click on "Device Manager"
3. Expand "Network Adapters"
4. Right click your network adapter
5. click "properties"
6. click the tab named "Advanced"
7. Find "IP Checksum Offload" and click it
8. Put the value to the right to "Disabled"
9. Find "TCP Checksum offload (IPvX)
10. Set the value to the right to "Disabled"
The Wiki Wireshark article had this:
In Windows, go to Control Panel->Network and Internet Connections->Network Connections, right click the connection to change and choose 'Properties'. Press the 'Configure...' button, choose the 'Advanced' tab to see or modify the "Offload Transmit TCP Checksum" and "Offload Receive TCP Checksum" values.
It seems like a server side issue rather than Load Balancer problem.
Hope this helps
Please rate useful posts and remember to mark any solved questions as answered. Thank you. -
NBCSports Live Extra not working for F1
Why can't I access NBCSports streaming Live Extra service? I tried to watch the Formula One qualifying today and logged in like you're supposed to, but all it does after the "loading" spinner is kick me back out to the "You're only two steps away from Live Extra!" page. Please explain.
Live Mesh is afaik no longer supported and can't be used anymore by new users.
In WIndows Phone 8 use the backup feature (Settings>Backup), Settings, SMS messages, contacts, Calendar entries and your app list will be restores when you reset the phone and go through the Device First use sequence. It is important that your carrier has the settings for Internet on the SIM otherwise this will not work. Make sure you have transferred all media files to either SkyDrive or your PC through Explorer (Using MTP) or the available Windows phone app(Mac or PC).
If you have a Windows Phone 7.x device your Contacts and Calendar entries are synced to their respective accounts and will be synced back when you set up the phone after a reset. SMS/MMS messages and most app settings will unfortunately be lost. Media files should be synced to your PC using Zune or Mac using the Windows Phone app (in Mac appstore).
Apps can be reinstalled using the app ReInstaller.
Click on the blue Star Icon below if my advice has helped you or press the 'Accept As Solution' link if I solved your problem.. -
Live streaminng not working from Adobe 3.1 Encoder to iOS devices
We are trying to live stream from Adobe 3.1 encoder(on PC ) to live stream on IOS devices, by broadcasting the stream to Adobe Media Server 5 Professional.However though we succeeded in streaming live to PC, it is not working on IOS devices.Only when we uncheck the Audio option from Encoder, we are able to Live stream to IoS devices, which will be only the video without any audio.When we we have audio option checked as well, it works for PC, but for Iphones/Ipads it flickers once and then gives a error message " Cannot Decode".The current settings on encoder is as below
The current process is to use the default HDS links(as per the stream URL) for the PC, and the HLS links for IOS.Any guidance how to get the audio working here on IOS devices will be of great help.
Note:Online most of the places use AAC format for audio on encoder, is that the only one which can work for IOS devices?Yes, AAC is the codec that iOS devices support
-Karishma -
Mail App on my Powerbook G4 will not reply or reply all. I've tried:
Clicking the button
Double clicking the message and clicking the button in that window
Using the menu item.
The shortcut key.
None work. Running mail version 3.5 on Mac OS X 10.5.5
I'm about to head off for 2 months where I'll only have my laptop so be pleased to get this fixed !try resetting your mail preferences. do you have a backup from before this started? if you do, quit mail and restore the file /users/username/library/preferences/com.apple.mail.plist from the backup. start Mail and see if it works. if you don't have a backup, move the above file to the desktop and start Mail. you'll have to set up all your accounts from scratch. once you do they should recognize their existing mailboxes.
see if the reply button works after that. -
Cisco Unity Device notification SMTP, email and text not working
Client has Unity 1.x. I know it's pretty old. BUt looking at alot of documentation, the device notification concept is similar.
Currently the users are unable to recieve text notification or email notification.
I follwed the following steps:
1. configured the unity connection server to relay messages to a Smart host. In this link. http://www.cisco.com/en/US/docs/voice_ip_comm/connection/1x/administration/guide/acm150.html#wp1042694
2. I ocnfigured the user's device notification for SMTP. I put the user's email address.
3. I tried to set it up for text messaging and that did not work also.
Can someone please help me out. What am i doing wrong?I use [email protected] to forward emails to my phone . . . it gives me most of the message in the email, rather than just the subject line and maybe a word or two of the message.
Emails should be sent to your10-digit [email protected] or @vzwpix.com -
Windows Live Application Not Working
I got a nokia n81 8gb firmware v 21.0.010 downloaded the Windows Live application from the download section on my phone it downloaded started installing after it finished i got an error message Unable to run application. restarted phone tried to run it from Applications folder not working. uninstalled redownloaded and installed same problem. any help appreciated, thanks.
A friend of mine downloaded the same application and its working for him. but when he clicked the download button he was offered to download and install Nokia Web services Support Package and Nokia Internet Services Support Package before downloading and installing the Windows Live application itself. i did not get any prompt for downloading or installing any kind of application before installing the messenger itself thats why its not working coz obviously it needs those files to work. is this some kinda mistake or ? i dont get it how am i suposed to get those packages to make the application work if i cant get them from the download application ? any help appreciated. thanks alot
Maybe you are looking for
-
I have a voice memo on my ios 7 iphone 4S, i synced it to my itunes on my imac, but right after that happened I had an error message where iTunes couldnt save the library file. I was able to solve that problem but when I fixed iTunes, it reverted it
-
Hi All, I have multiple issues related to Limit or service purchase orders in SRM 4.0. We are in extended classic scenario and service pack 12. 1. When try to Limit SC in full functionality BBPSC01, after adding limit line to SC not able to find "Fol
-
Security erasure of sun hard disk drives
hi there, first of all i am an absolute beginner when it comes to sun systems so i do apologise if this is the wrong type of forum for me, my problem is i have several sun ULTRASPARC 60 CREATOR 3D tower systems and i need to erased the hard drives se
-
Hi SRM Experts, SRM 7 EHP 1 ECC 6 EHP 5 Netweaver PI 7.0 EHP 2 We are trying to setup CPPR scenario for PPS. Currently we need to setup the following SOA services in ECC & SRM (through SOAMANAGER) - QueryCodeList RFQRequestSUITERequest RFQRequestSUIT
-
Oracle Application Server 10g Administration ( Exam 1Z0 - 311 ).
Hi All, I need some information from you guys, I will be going to execute the OAS 10g Admin exam [Exam 1Z0 - 311] ,for that Where we have to get a study material ? Please suggest me on this. Thanks !