Unity 8 upgrade and delay when accessing voicemail via TUI

We just recently upgraded our Unity UM 7.x with FO to 8.03. when hitting messages and after entering your password you just get dead air. when going back in and doing it again it works again. this is happening to everyone. i read in the release notes :
First Subscriber to Call Cisco Unity After Restart Hears Delay Before First
Prompt
The first subscriber to call Cisco Unity after the software has been restarted may hear several seconds of
silence before Cisco Unity plays the first prompt. Subscribers making subsequent calls do not experience
the delay. The silence occurs while Cisco Unity loads the conversations that are configured for the
system; the length of the delay depends on how many conversations are in use on the system.
is there a fix or known issue?

Hello,
The message that you point out in the release note is not considered an issue. Rather the disclosure in the release note is make the installler aware that this is expected as a result of the current software design.
Thanks,
Scott

Similar Messages

  • 4000-5000 ms delays when accessing Office365 voicemail

    A couple of our customers recently moved their voicemail from an on-premise Exchange server to a cloud-based solution with Office365.  Afterwards, users are reporting delays of around 5-seconds from the time the Messages button is pressed to when they hear audio from Office365.  Before moving voicemail to Office365, there were no noticeable delays after pressing the Messages button.
    Both customers have very similar topologies - CUCM 9.1.2, and an Audiocodes Mediant 1000 SBC (Session Border Controller).  CUCM has a SIP trunk to the Audiocodes SBC, and the SBC has a SIP trunk with TLS for the connection to Office365.  According to Microsoft, this is a supported configuration.
    When reviewing SIP logs on the Audiocodes SBC, I see an approximately 5-second delay from initiation of the call (SIP/2.0 100 Trying) to when Office365 answers (SIP/2.0 180 Ringing).  In the logs below, 10.77.162.16 is the Audiocodes SBC's internal IP address, and X.X.X.X is it's public address.
    08:20:22.423 : 10.77.162.16 : Local 0 :NOTICE : [S=16653173] [SID:983092790] SIP/2.0 100 Trying Via: SIP/2.0/TLS X.X.X.X:5061;alias;branch=z9hG4bKac1438283782 From: "Sophia Dominquez"
    08:20:27.501 : 10.77.162.16 : Local 0 :NOTICE : [S=16653183] [SID:983092790] SIP/2.0 180 Ringing Via: SIP/2.0/TLS X.X.X.X:5061;alias;branch=z9hG4bKac1438283782 From: "Sophia Dominquez"
    Has anyone else noticed similar delays when accessing Office365 voicemail?  If so, what was the resolution? 
    Thanks everyone!

    Do you have a link to any documentation that states this?

  • My Ipad was upgraded and now when I open a book in Kindle it will not open the book and just takes me back to the opening screen of my IPAD. This happen after a upgrade to some IOS. Help.

    My IPAD was upgraded and now when I open a book in Kindle it will not open and reverts back to opening screen of the IPAD and this occurred after some upgrade with IOS.Help.
    Thanks

    The app may not be iOS6 compatible. Have you tried to reset it? HOld down the sleep and home keys, past when you see the red slider, and unitl you see the silver apple. Let it reboot and see if that helps. If it doesn't, then I'd contact Kindle and see when they're going to update their app or if they even know there's an issue. Unfortunately, the burden is on app developers to be compatible with the operating system, not on the OS to be compatible with millions of apps. So it's up to them.

  • I upgraded and now when I plug in my iphone4 to sync it isn't shown under devices...is there a reason why?

    I upgraded and now when I plug in my iphone4 to sync it isn't shown under devices...is there a reason why?

    I did all that and reinstalled itunes! It does recognize my device now but it won't back up...says that it can't be saved to this computer!? I did all the troubleshooting and I am stuck:(

  • Safari on ios7 over ipad4 is often lag and delay when opening Thai webpage

    Safari on ios7 over ipad4 ,also other ios7 device , is often lag and delay when open thai webpage with large content
    For example; http://drama-addict.com/2013/09/30/สี่คูณสามไม่เท่ากับสาม/
    This thai-ios7 lag is very annoying, it had never happened on ios6 or ios5 or even ios4.
    Fix this problem immediately

    Safari on ios7 over ipad4 ,also other ios7 device , is often lag and delay when open thai webpage with large content
    For example; http://drama-addict.com/2013/09/30/สี่คูณสามไม่เท่ากับสาม/
    This thai-ios7 lag is very annoying, it had never happened on ios6 or ios5 or even ios4.
    Fix this problem immediately

  • Mozilla constintly is not responding , and delaying when im typing. ever since i downloaded this new version.

    it constantly is not responding , and delaying when im typing. ever since i downloaded this new version.

    The Firefox pop-up blocker is usually very effective for blocking pop-ups generated by websites, but it sounds like you may have picked up some Malware that is generating those pop-ups from you own PC.
    Install, update, and run these programs in this order. They are listed in order of efficacy.<br />'''''(Not all programs detect the same Malware, so you may need to run them all to solve your problem.)''''' <br />These programs are all free for personal use, but some have limited functionality in the "free mode" - but those are features you really don't need to find and remove the problem that you have.<br />
    ''Note: If your Malware infection is bad enough and you are mis-directed to URL's other than what is posted, you may have to use a different PC to download these programs and use a USB stick to transfer them to the afflicted PC.''
    Malwarebytes' Anti-Malware - [http://www.malwarebytes.org/mbam.php] <br />
    SuperAntispyware - [http://www.superantispyware.com/] <br />
    AdAware - [http://www.lavasoftusa.com/software/adaware/] <br />
    Spybot Search & Destroy - [http://www.safer-networking.org/en/index.html] <br />
    Windows Defender: Home Page - [http://www.microsoft.com/windows/products/winfamily/defender/default.mspx]<br />
    Also, if you have a search engine re-direct problem, see this:<br />
    http://deletemalware.blogspot.com/2010/02/remove-google-redirect-virus.html

  • Invalid username and password when accessing ovi.....

    i have a problem when trying to sign in to ovi on my phone, it says e mail and password invalid even though this is not the case. i can sign in to ovi on the laptop and my husbands E71 using same information. Does anyone know a solution to this........ its driving me up the wall!!!!

    This question was asked before. I gave them the solution but they didn't take my advice.
    When entering the user name and password to access Ovi, the phone adds a blank character at the end of the user name and/or the password, and the site interpretes them as invalid. If you, after entering the info, erase the last blank character by using the delete button of the keyboard and then click "enter" no problems will remain.
    It happened to me too, therefore I know it so well. 
    mgoksoy

  • Bridge to bridge and bridge to access-point via wireless is it possible.

    here;s my topology i am trying to configure. i have a router whose ethernet is connected to a bridge.this bridge 1 is connected to a bridge 2 via wireless. now i am trying to connect a access-point via wireless to this bridge2. is it possible for bridge 2 to support connectivity to the bridge1 and the access-point both of them via wireless.
    can someone pls help me on this.
    waiting for someone to reply.
    regards
    sebastan

    You can set up each radio in the access point for different functionality. Considering the scenario, this can be done by setting up the SSID for the G radio and another SSID for the A radio. Then, set the role in the radio network parameter for the G radio to access point and for the A radio to the root bridge role.
    ou can prevent unauthorized users from reconfiguring your access point/bridge and viewing configuration information. Typically, you want network administrators to have access to the access point/bridge while you restrict access to users who connect through a terminal or workstation from within the local network.
    To prevent unauthorized access to your access point/bridge, you should configure one of these security features:
    Username and password pairs, which are locally stored on the access point/bridge. These pairs authenticate each user before that user can access the access point/bridge. You can also assign a specific privilege level (read only or read/write) to each username and password pair.
    http://www.cisco.com/en/US/products/ps5861/products_configuration_guide_chapter09186a00804ed6d4.html

  • Cannot access voicemail via "My Verizon"

    I just upgraded to FIOS digital voice.  I can access call history etc. from my verizon homepage, but I cannot access my voicemails.  It tells me I need to initailze my voicemail before I can view on the web.  I've already initialized my voicemail and still have this message.  Has anyone seen this issue and is there a solution?
    TEXT of initialize message is below:
    You MUST initialize your mailbox before using the online account manager to retrieve messages or change Voicemail settings. Please complete the following steps: 1. Sign out of the online account manager 2.Dial 1-888-2FIOSVM and follow the easy steps to initialize your mailbox 3.Sign back into your online account manager. Now you'll be able to manage your voicemail settings and retrieve messages.

    We would like to look at your account on the back end. I have sent you a private message to get more information from you.
    Anthony_VZ
    **If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
    Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

  • Lost window, using published application on server 2012, when access it via web remote.

    Hi,
    We use an edi software installed on a Server 2012.
    When we use this software accessing the server by Remote Desktop, everything works normal.
    When we use the same software accessing the server by web access, (...softname/RDWeb/Feed/webfeed.aspx) where was published this soft application, we lost some windows after different actions.
    For example if I do a modification for a value in one specific window, after I click save, that window disappear but can appear again only if I click again anywhere on my desktop.
    In other words that window lost the focus and probably is still open under another window. Clicking again anywhere, will reactivate it and that window appear again.
    Can you please help me to find a solution to this problem?
    Thank You!

    Hi,
    For example if I do a modification for a value in one specific window, after I click save, that window disappear but can appear again only if I click again anywhere on my desktop.
    Would you please tell us which window and what has been modified specifically?
    Best Regards,
    Amy
    Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • Slow finder Browsing when accessing LAN via VPN connexion

    I am running ML Server, latest upadte on a 2010 Mac Mini Server machine.
    When I am connected to my network from a remote location via VPN, and I try to browse my LAN structure with Finder, it takes ages for the list of folders/files to appear and refresh.
    I have checked my VPN configuration and tried different type (L2TP, PPTP) but nothing significantly differ in term of browsing speed.
    I also appreciate that the network connection at the remote location, as well as the upload speed on my local network can influence the overwal browsing speed... but after several test, I confirm I have more than 3 Mbps bandwith for upload on the local network, and 20 Mbps minimum on the remote location.
    I also tried AFP / SMB, but does not seem to change anything.
    So, I guess I hope the Community has already experienced the issue and some of you guys may have found a workaround to this issue.
    Many thanks.

    why not try cisco ipsec
    Input the following settings:
    Interface: VPN
    VPN Type: Cisco IPSec
    Service Name: This can be anything, I left the default.
    Edit the new interface details as follows:
    Server Address: cisco.vpntraffic.com or other country vpn such as Portugal VPN
    Account Name: Your vpn account
    Password: Your vpn password
    How to setup Mac OS X Built-In Cisco VPN

  • Snow Leopard Upgrade and ICal / CalDav access

    I've upgraded half of the computers in the office to Snow Leopard only to find that now upgraded users cannot change the calendars. (problem.)
    Getting "Only calendar admin and delegates with permission can make changes"... so no problem right? Just set up delegation on the server... well the version of CalDav we're using doesn't support delegation.
    Shouldn't ICal recognize a server that doesn't support delegation instead of making the calendar read-only for everyone since it is impossible to create a delegate?
    Solutions?

    Confirmed that iCal 4.0 (packaged with Snow Leopard) breaks when used with the Cosmo CalDAV server (http://chandlerproject.org/Projects/CosmoDevelopmentHome). Before in iCal 3.x it worked fine. When attempting to update a calendar I now get the message:
    "You can't change events or to do items in the $calendar calendar."
    I'd encourage Apple to test iCal with other popular CalDAV servers before releasing it as it is supposed to be compatible with open standards.

  • High CPU and Delay when applying metadata

    Hi All:
    I have an issue where my CPU hits 60% when applying keywords. This can be when I apply it to one image or to 100s. Obviously, when I have more pictures selected or more keywords, there is a much larger delay.
    Ideas from anyone?
    Thanks

    Hi All,
    There is a workaround to resolve this issue. As it is related to modifying registry, please be very careful and take backup of your registry first.
    The workaround is to set the value of "Disable Performance Counters" to 0 @ HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\PerfProc\Performance
    If this registry entry is not present, create one. Meanwhile, we are working on fixing this issue.
    Hope this helps!
    Thanks,
    Deepika
    PS: Edit the Registry at your own risk. Inappropriate changes to the Windows Registry can disable the operating system! To safeguard against such an accident, back up your existing registry by choosing Registry » Export Registry File after launching the Registry Editor and before making any changes

  • Can't write my user and password when accessing OV...

    Hi all,
    can somebody help me to resolve my issue
    when i access OVI, i am requested to  enter user and password, but when i write my user and password, it looks like i am writing in white caracters , i can't see what i am writing.
    thx for all and regards

    are you using predictive text ?what phone have you ?you can use the hash key to change characters
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

  • 2.0 update is slow and delayed when doing things and typing

    Anyone else found this?

    Clark,
    The v2.0 definitely seems much more sluggish when typing. Also, when you tap "Contacts" now, it takes several seconds for the names to appear and let you type or scroll. Locks up the iPhone for 3-8 seconds. And the delay after hitting the first character in MAP or other applications that search for content as you type, has increased quite a bit.
    Jim
    Message was edited by: HeyJP

Maybe you are looking for