Unity - COBRAS Export Failure -DOH failed for message extraction
Tried logging in as UnityInstall/UnityAdmin, and UnitySVC which have access to the Domain and still getting this error (also tried logging in as local Administrator.:
1/29/2009 9:45:20 AM: Attaching to DOH to check for rights to export messages from Unity
1/29/2009 9:45:20 AM: (error) attaching to DOH message store -2147221492 (Method '~' of object '~' failed) in procedure InitMessageExport of Module modMessages
1/29/2009 9:45:20 AM: (error) failed to log into DOH for message extraction
Double checked, ran some tests and talked with a few QA folks that tested this against Domino installs and everyone agrees that logging in as the same account assigned to the AvCsMgr service should work (I don't have a 4.0(5) Domino install but I did check it this morning against a 5.0 and 7.0 install).
The only other thing that I can think to check is to make sure the "wedge" DLL (used to bridge the connection to the running service with Domino) is installed and registered properly. Look in the install directory for COBRAS and you should see a file called "ggotdohsvr.dll" - run regsvr32 against it to be sure it's COM interfaces are registered properly and then try it again (assuming you are logged in locally on the system with the AvCsMgr service account).
Similar Messages
-
Save validation failed for message
Hi !
I am trying to save a workflow to the database however I am getting an error saying 'Save validation failed for message 'WFTEST/COMPLAINT_REJECTED'
underthis i got
401: Could not find token 'NOTE' among message attributes
401: Could not find token 'FORWARD_TO_USERNAME' among message attributes'
What must I do to stop getting this error message.Hi,
I've answered your duplicate post on the [WorkflowFAQ forum|http://smforum.workflowfaq.com/index.php?topic=998.0].
HTH,
Matt
WorkflowFAQ.com - the ONLY independent resource for Oracle Workflow development
Alpha review chapters from my book "Developing With Oracle Workflow" are available via my website http://www.workflowfaq.com
Have you read the blog at http://www.workflowfaq.com/blog ?
WorkflowFAQ support forum: http://forum.workflowfaq.com -
Exporting avi give "Failed -50" message
I've been trying to export some avi files into .mv4 and .mp4 files, but every time I've tried the export fails near the end with an error code of -50. I've tried different files and keep getting the same message. The avi files play fine, and they are all under 1 gig, more like 600 MB. Anybody have any ideas?
It seems ANY desirable export from Quicktime Player 7.0.4 fails for me with Error -50.
I have 640x480 MPEG-4 video clips from a Kodak Easyshare 360. I was able to export them to DV Stream, then bring DV into iMovie HD 6.0.1, only a week ago.
At least, I thought I did! Now, the same export fails every time at the very end with Error -50. I can only do it by first exporting to .MOV to Quicktime .MOV, then exporting .MOV to DV. It quickly turns into a blotchy mess.
The MPEG-4 files (which have the .MOV suffix) can't be dragged directly into iMovie's clips field, either. They start to import, then fail for an "unknown reason."
Mac OS X (10.4.6) -
Export to PDF fails for some reports, but report viewer works
Hi all
Our application produces several different reports.
- Report A can successfully be viewed in the ASP.NET report viewer control and can be exported to PDF
- Reports B and C can successfully be viewed in the ASP.NET report viewer (all pages), but export to PDF fails with a very unclear error message. The stack trace is attached below.
Two days ago, reports B and C have fully worked, and I'm sure by 100% that the report templates haven't been modified since then.
Can anyone explain what is going wrong? Is there some internal logging inside Crystal Reports that can be investigated to find out about the reasons of the error?
Any help would be greatly appreciated!
Thanks
Kuno
PS.: The Crystal Libraries under investigation are quite old. In fact, it is a very old application that still runs under .NET 1.0.
CrystalDecisions.CrystalReports.Engine.ExportException: Fehler in Datei C:WINDOWSTEMP emp_b9cf0dd0-8964-4ddf-ba09-0daaa4e1ef20.rpt:
Fehler von Export-DLL gefunden:
at u263B.u263BJ(String u2660§, EngineExceptionErrorID u2660u25AC)
, Int32 u2660u266B)Int16 u2660
at u263B.u263BD(Int16 u2660u2640)
at CrystalDecisions.CrystalReports.Engine.FormatEngine.Export(ExportRequestContext reqContext)
at CrystalDecisions.CrystalReports.Engine.FormatEngine.Export()
at CrystalDecisions.CrystalReports.Engine.ReportDocument.Export()
at AdamsClient.Web.EngineerClient.TolerancesReportPage.btnSpecPDF_Click(Object sender, EventArgs e) in D:ProjektexxxxAdamsII SVNDevelopmentS
ourceAdamsAdamsClientWebEngineerClientTolerancesReportPage.aspx.cs:line 496
at System.Web.UI.WebControls.Button.OnClick(EventArgs e)
at System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument)
at System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument)
at System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData)
at System.Web.UI.Page.ProcessRequestMain()Hello Kuno,
please try to find out more details.
You say it is data dependent. Could you be a bit more specific. What data work or do not work ?
As a good test pls see if our samples reports work. They come with a default installation. If you do not have them any more - get them from [here|https://smpdl.sap-ag.de/~sapidp/012002523100005852352008E/cr_xi_xtreme_rep_smpl_en.zip].
Can you display and export them ? Do you get the same error ?
Thanks in advance
Falk -
Oracle 10g Discoverer Reports & export to xls fails for large reports
Hi ,
We have following configurations:
1: RHEL 5.4
2: Discoverer :Version 10.1.2.48.18
3: Oracle10g Apps Version : Version 10.1.2.0.2
Issue:
Most of small reports works fine ....but when large discoverer reports are executed the page
keeps on refreshing for 15-20 hours but no output ....same for export to xls ......
But same reports works fine in oracle9i for same data voulme....
Observations:
When on linux with top command the processes are monitored its observed that discoverer process
dis51ws dies for large reports after 1-2 minutes ...& the page keeps on refreshing but no output....
for 1-2 minutes it consumes 50-80% cpu utilisation then process disappears & cpu 80% idle ...
It seems that as 10g Apps is installed on RHEL 5.4 ...non certfified OS causing an issue...
Can any one adds more inputs in this regards......
we have checked logs : below are log details :
Below logs gives "Logkeys: exceptions discoiv.servlet_exceptions" for this report ...
1:
OC4J~OC4J_BI_Forms~default_island~1:
10/04/11 12:11:29 Oracle Application Server Containers for J2EE 10g (10.1.2.0.2) initialized
10/04/11 12:11:59 Using oracle.reports.util.EnvironmentGlobal class
10/04/11 14:23:37 Logkeys: exceptions discoiv.servlet_exceptions
10/04/11 14:23:38 Discoverer Model - 10.1.2.48.18
Session ID:2010041114240115278
10/04/11 14:25:42 Logkeys: exceptions discoiv.servlet_exceptions
10/04/11 14:25:42 Discoverer Model - 10.1.2.48.18
Session ID:2010041114254315439
10/04/11 14:28:53 Logkeys: exceptions discoiv.servlet_exceptions
10/04/11 14:28:54 Discoverer Model - 10.1.2.48.18
Session ID:2010041114285615691
10/04/11 14:29:13 Logkeys: exceptions discoiv.servlet_exceptions
10/04/11 14:29:13 Discoverer Model - 10.1.2.48.18
Session ID:2010041114291315728
10/04/11 14:32:35 Logkeys: exceptions discoiv.servlet_exceptions
10/04/11 14:32:35 Discoverer Model - 10.1.2.48.18
Session ID:2010041114323615949
10/04/11 14:32:48 Logkeys: exceptions discoiv.servlet_exceptions
10/04/11 14:32:48 Discoverer Model - 10.1.2.48.18
Session ID:2010041114324815982
10/04/11 14:34:44 Logkeys: exceptions discoiv.servlet_exceptions
10/04/11 14:34:44 Discoverer Model - 10.1.2.48.18
Session ID:2010041114344616128
10/04/11 14:34:55 Logkeys: exceptions discoiv.servlet_exceptions
10/04/11 14:34:55 Discoverer Model - 10.1.2.48.18
Session ID:2010041114345516155
10/04/11 14:36:25 Tutalii: /oracle10gas/app/oracle10g/discoverer/lib/discoverer5.jar archive
2:
Discoverer~SessionServer~12
Calling GetData on Preference Repository
Calling GetData on Preference Repository
Calling GetData on Preference Repository
Calling GetData on Preference Repository
Active Eul: EULADMIN
Calling GetData on Preference Repository
Calling GetData on Preference Repository
Calling GetData on Preference Repository
Calling GetData on Preference Repository
Calling GetData on Preference Repository
Calling GetData on Preference Repository
Calling GetData on Preference Repository
DCSCORBAInterface::Delete called
DCSCORBAInterface destructor called
DCSCORBAInterface::Delete called
DCSCORBAInterface destructor called
ASSERT [email protected]:436
ASSERT [email protected]:436
ASSERT [email protected]:436
ASSERT [email protected]:436
ASSERT [email protected]:436
ASSERT [email protected]:436
ASSERT [email protected]:436
ASSERT [email protected]:436
ASSERT [email protected]:436
ASSERT [email protected]:436
ASSERT [email protected]:436
ASSERT [email protected]:436
ASSERT [email protected]:436
3:
application.log
10/04/11 14:37:25 discoverer: [TRACE] [AJPRequestHandler-ApplicationServerThread-17] oracle.discoverer.applications.framework.ApplicationController.execute Finding async request action forward
10/04/11 14:37:25 discoverer: [TRACE] [AJPRequestHandler-ApplicationServerThread-17] oracle.discoverer.applications.framework.ApplicationController.execute Calling externalize
10/04/11 14:37:25 discoverer: [DEBUG] [AJPRequestHandler-ApplicationServerThread-17] oracle.discoverer.applications.viewer.model.WorksheetModel.getStateString EXT_TOOL: dvtb xk-1ml versionzw1.0w kyxdvtbyxbisltyxbicho vzwwjyxjbisltyxjdvtby
10/04/11 14:37:25 discoverer: [DEBUG] [AJPRequestHandler-ApplicationServerThread-17] oracle.discoverer.applications.viewer.model.WorksheetModel.getStateString EXT_VIEW: dv xk-1ml versionzw1.0w kyxdv bazw0w cszw25wyxpc vzw1wjyxjdvy
10/04/11 14:37:25 discoverer: [DEBUG] [AJPRequestHandler-ApplicationServerThread-17] oracle.discoverer.applications.viewer.model.WorksheetModel.getStateString EXT_VIEW: lc
10/04/11 14:37:25 discoverer: [DEBUG] [AJPRequestHandler-ApplicationServerThread-17] oracle.discoverer.applications.viewer.model.WorksheetModel.getStateString EXT_HS: dvhs
10/04/11 14:37:25 discoverer: [DEBUG] [AJPRequestHandler-ApplicationServerThread-17] oracle.discoverer.applications.viewer.model.WorksheetModel.getStateString EXT_DS: dv_ds &qls_z!2=New GL Report.Clndr Id&arq=false&qls_x!14=Sheet 1.Closing Balance (Credit)&qls_x!3=New GL Report.Voucher No&qls_z!3=New GL Report.Frm Prd&fm=xml&qls_z!4=New GL Report.To Prd&qls_x!2=New GL Report.Prd Desc&qls_x!11=Sheet 1.Debit Amount&qls_x!4=New GL Report.Gl Voucher No&qls_x!9=Sheet 1.Opening Balance Debit&tss_s!0=New GL Report.Acct Id,lh,group,false&qls_x!1=New GL Report.Acct Sdesc&qls_z!1=New GL Report.Loc Desc&qls_x!10=Sheet 1.Opening Balance (Credit)&qls_x!12=Sheet 1.Credit Amount&aow=false&qls_x!7=New GL Report.Shrt Code&qls_x!13=Sheet 1.Closing Balance (Debit)&qls_x!6=New GL Report.Pmt Rct Dt&qls_x!8=New GL Report.Dtl Nrtn&sss=true&qls_x!5=New GL Report.Voucher Dt&qls_x!0=New GL Report.Acct Id&qls_z!0=New GL Report.Loc Id&ddsver=1
10/04/11 14:37:25 discoverer: [DEBUG] [AJPRequestHandler-ApplicationServerThread-17] oracle.discoverer.applications.viewer.model.ViewerModelImpl.externalize [EXTERN_STATE]: $wksht$%24dv_ds%24%26qls_z%212%3DNew+GL+Report.Clndr+Id%26arq%3Dfalse%26qls_x%2114%3DSheet+1.Closing+Balance+%28Credit%29%26qls_x%213%3DNew+GL+Report.Voucher+No%26qls_z%213%3DNew+GL+Report.Frm+Prd%26fm%3Dxml%26qls_z%214%3DNew+GL+Report.To+Prd%26qls_x%212%3DNew+GL+Report.Prd+Desc%26qls_x%2111%3DSheet+1.Debit+Amount%26qls_x%214%3DNew+GL+Report.Gl+Voucher+No%26qls_x%219%3DSheet+1.Opening+Balance+Debit%26tss_s%210%3DNew+GL+Report.Acct+Id%2Clh%2Cgroup%2Cfalse%26qls_x%211%3DNew+GL+Report.Acct+Sdesc%26qls_z%211%3DNew+GL+Report.Loc+Desc%26qls_x%2110%3DSheet+1.Opening+Balance+%28Credit%29%26qls_x%2112%3DSheet+1.Credit+Amount%26aow%3Dfalse%26qls_x%217%3DNew+GL+Report.Shrt+Code%26qls_x%2113%3DSheet+1.Closing+Balance+%28Debit%29%26qls_x%216%3DNew+GL+Report.Pmt+Rct+Dt%26qls_x%218%3DNew+GL+Report.Dtl+Nrtn%26sss%3Dtrue%26qls_x%215%3DNew+GL+Report.Voucher+Dt%26qls_x%210%3DNew+GL+Report.Acct+Id%26qls_z%210%3DNew+GL+Report.Loc+Id%26ddsver%3D1%24dv%24xk-1ml+versionzw1.0w+kyxdv+bazw0w+cszw25wyxpc+vzw1wjyxjdvy%24wd%24false%24lc%24%24dvtb%24xk-1ml+versionzw1.0w+kyxdvtbyxbisltyxbicho+vzwwjyxjbisltyxjdvtby%24wvs%241101%24dvhs%24$cn$&vct=svd&cnk=cf_a101$ap$%26df%3D%26l%3D%26s%3D%26nc%3D%26dl%3D$expl$&sp=&node=&event=focus&state=(117)&root=63&wbt=2$prid$NEW_GL_REPORT%2F31$ctyp$viewer
10/04/11 14:37:25 discoverer: [TRACE] [AJPRequestHandler-ApplicationServerThread-17] oracle.discoverer.applications.framework.ApplicationController.execute Storing state
10/04/11 14:37:25 discoverer: [INFO] [AJPRequestHandler-ApplicationServerThread-17] oracle.discoverer.applications.framework.ApplicationController.execute Externalize Perf: 8ms
10/04/11 14:37:25 discoverer: [TRACE] [AJPRequestHandler-ApplicationServerThread-17] oracle.discoverer.applications.framework.ApplicationController.execute Saving Attributes
10/04/11 14:37:25 discoverer: [TRACE] [AJPRequestHandler-ApplicationServerThread-17] oracle.discoverer.applications.framework.ApplicationController.execute Saving ApplicationRequest
10/04/11 14:37:25 discoverer: [TRACE] [AJPRequestHandler-ApplicationServerThread-17] oracle.discoverer.applications.framework.ApplicationController.execute Checking for SSO mode
10/04/11 14:37:25 discoverer: [TRACE] [AJPRequestHandler-ApplicationServerThread-17] oracle.discoverer.applications.framework.ApplicationController.execute Saving errors, messages
10/04/11 14:37:25 discoverer: [DEBUG] [AJPRequestHandler-ApplicationServerThread-17] oracle.discoverer.applications.framework.ApplicationController.execute Returning final forward: "/ExportProgress.uix" redirect: "false"
10/04/11 14:37:25 discoverer: [TRACE] [AJPRequestHandler-ApplicationServerThread-17] oracle.discoverer.applications.framework.ApplicationController.execute ----------------------- End Request --------------------------
10/04/11 14:37:25 discoverer: [INFO] [AJPRequestHandler-ApplicationServerThread-17] oracle.discoverer.applications.framework.ApplicationController.execute Total Request Time in AppCtrl: 18
10/04/11 14:37:25 discoverer: [DEBUG] [AJPRequestHandler-ApplicationServerThread-17] org.apache.struts.action.RequestProcessor.processForwardConfig processForwardConfig(ForwardConfig[name=long running operation,path=/ExportProgress.uix,redirect=false,contextRelative=false])
10/04/11 14:37:25 discoverer: [DEBUG] [AJPRequestHandler-ApplicationServerThread-17] oracle.discoverer.applications.viewer.view.DiscovererPageBroker.isCacheable Setting cacheable to: true
4: XML log:
log2010041114285615691.xml
<MSG_GROUP>DCS</MSG_GROUP> <PROCESS_ID>15691</PROCESS_ID> <FILE_NAME>dcstim.cpp</FILE_NAME> <LINE_NUMBER>184</LINE_NUMBER> <THREAD_ID>-1283799360</THREAD_ID> <LOG_TIME>Sun Apr 11 14:29:13 2010
</LOG_TIME> ]]>
</SUPPL_DETAIL> </PAYLOAD> </MESSAGE>
<MESSAGE><HEADER><TSTZ_ORIGINATING>2010-04-11T14:29:13+00:00</TSTZ_ORIGINATING> <COMPONENT_ID>DISCOVER</COMPONENT_ID> <MSG_TYPE TYPE="NOTIFICATION"></MSG_TYPE><MSG_LEVEL>4</MSG_LEVEL> <HOST_ID>2010041114285615691</HOST_ID> <MODULE_ID>DCS</MODULE_ID> </HEADER> <PAYLOAD><MSG_TEXT><![CDATA[Timer started.]]></MSG_TEXT> <SUPPL_DETAIL><![CDATA[
<MSG_GROUP>DCS</MSG_GROUP> <PROCESS_ID>15691</PROCESS_ID> <FILE_NAME>dcstim.cpp</FILE_NAME> <LINE_NUMBER>162</LINE_NUMBER> <THREAD_ID>-1283799360</THREAD_ID> <LOG_TIME>Sun Apr 11 14:29:13 2010
</LOG_TIME> ]]>
</SUPPL_DETAIL> </PAYLOAD> </MESSAGE>
<MESSAGE><HEADER><TSTZ_ORIGINATING>2010-04-11T14:29:13+00:00</TSTZ_ORIGINATING> <COMPONENT_ID>DISCOVER</COMPONENT_ID> <MSG_TYPE TYPE="TRACE"></MSG_TYPE><MSG_LEVEL>5</MSG_LEVEL> <HOST_ID>2010041114285615691</HOST_ID> <MODULE_ID>DCS</MODULE_ID> </HEADER> <PAYLOAD><MSG_TEXT><![CDATA[Return DCSModelInterface::SendReceiveData(kScheduleInterface, inTable, outTable)
outTable = DCITable
Length=0
]]></MSG_TEXT> <SUPPL_DETAIL><![CDATA[
<MSG_GROUP>DCS</MSG_GROUP> <PROCESS_ID>15691</PROCESS_ID> <FILE_NAME>dcsmdli.cpp</FILE_NAME> <LINE_NUMBER>259</LINE_NUMBER> <THREAD_ID>-1283799360</THREAD_ID> <LOG_TIME>Sun Apr 11 14:29:13 2010
</LOG_TIME> ]]>
</SUPPL_DETAIL> </PAYLOAD> </MESSAGE>
<MESSAGE><HEADER><TSTZ_ORIGINATING>2010-04-11T14:29:13+00:00</TSTZ_ORIGINATING> <COMPONENT_ID>DISCOVER</COMPONENT_ID> <MSG_TYPE TYPE="NOTIFICATION"></MSG_TYPE><MSG_LEVEL>4</MSG_LEVEL> <HOST_ID>2010041114285615691</HOST_ID> <MODULE_ID>DCS</MODULE_ID> </HEADER> <PAYLOAD><MSG_TEXT><![CDATA[DCSModelInterface::SendReceiveData(kScheduleInterface)]]></MSG_TEXT> <SUPPL_DETAIL><![CDATA[
<MSG_GROUP>DCS </MSG_GROUP> <PROCESS_ID>15691</PROCESS_ID> <FILE_NAME>dcsmdli.cpp</FILE_NAME> <LINE_NUMBER>226</LINE_NUMBER> <THREAD_ID>-1283799360</THREAD_ID> <LOG_TIME>Sun Apr 11 14:29:13 2010
</LOG_TIME> <LOG_SIZE>0</LOG_SIZE> <EXTRA_INFO><MethodEnd duration="0.1" sizeChange="0" >
real 0m0.1s
user 0m0.900s
sys 0m0.109s
</MethodEnd></EXTRA_INFO> ]]>
</SUPPL_DETAIL> </PAYLOAD> </MESSAGE>
<MESSAGE><HEADER><TSTZ_ORIGINATING>2010-04-11T14:37:13+00:00</TSTZ_ORIGINATING> <COMPONENT_ID>DISCOVER</COMPONENT_ID> <MSG_TYPE TYPE="NOTIFICATION"></MSG_TYPE><MSG_LEVEL>4</MSG_LEVEL> <HOST_ID>2010041114285615691</HOST_ID> <MODULE_ID>DCS</MODULE_ID> </HEADER> <PAYLOAD><MSG_TEXT><![CDATA[Timer stopped.]]></MSG_TEXT> <SUPPL_DETAIL><![CDATA[
<MSG_GROUP>DCS</MSG_GROUP> <PROCESS_ID>15691</PROCESS_ID> <FILE_NAME>dcstim.cpp</FILE_NAME> <LINE_NUMBER>184</LINE_NUMBER> <THREAD_ID>-1283799360</THREAD_ID> <LOG_TIME>Sun Apr 11 14:37:13 2010
</LOG_TIME> ]]>
</SUPPL_DETAIL> </PAYLOAD> </MESSAGE>
<MESSAGE><HEADER><TSTZ_ORIGINATING>2010-04-11T14:37:13+00:00</TSTZ_ORIGINATING> <COMPONENT_ID>DISCOVER</COMPONENT_ID> <MSG_TYPE TYPE="NOTIFICATION"></MSG_TYPE><MSG_LEVEL>4</MSG_LEVEL> <HOST_ID>2010041114285615691</HOST_ID> <MODULE_ID>DCS</MODULE_ID> </HEADER> <PAYLOAD><MSG_TEXT><![CDATA[Timer started.]]></MSG_TEXT> <SUPPL_DETAIL><![CDATA[
<MSG_GROUP>DCS</MSG_GROUP> <PROCESS_ID>15691</PROCESS_ID> <FILE_NAME>dcstim.cpp</FILE_NAME> <LINE_NUMBER>162</LINE_NUMBER> <THREAD_ID>-1283799360</THREAD_ID> <LOG_TIME>Sun Apr 11 14:37:13 2010
</LOG_TIME> ]]>
</SUPPL_DETAIL> </PAYLOAD> </MESSAGE>
Regards,Hi ,
as per Note: 466697.1 ....its an memory error....& need to increase MaxVirtualDiskMem and MaxVirtualHeapMem
But we already have slowly increased MaxVirtualDiskMem and MaxVirtualHeapMem to below very high values ...but the issue remains same.......
as per note we are getting Logkeys: exceptions discoiv.servlet_exceptions error but
after that we are not getting below error ............
Unexpected error in state machine: java.lang.OutOfMemoryError
Hence I presume that its different issue rather than memmory....
Below are pref.txt values..........
CacheFlushPercentage = 25 # Percent of cache flushed if the cache is full. valid values 0 - 100%.
MaxVirtualDiskMem = 9294967296 # Maximum amount of disk memory allowed for the data cache. Should be greater than or equal to MaxVirtualHeapMem
MaxVirtualHeapMem = 4294967296 # Maximum amount of heap memory allowed for the data cache.
QueryBehavior = 0 # Action to take after opening a workbook (0 = Run Query Automatically, 1 = Don't Run Query, 2 = Ask for Confirmation)
Also we have raised an SR & as per SR .............all below settings are tried as per SR except for applying a recent patch....
====================================================================
Discoverer performance is largely determined by how well the database
has been designed and tuned for queries.
A well-designed database will perform significantly better than a poorly
designed database.
Workbook design can also affect query performance.
1. Apply latest Discoverer patch as documented in <<Note:237607.1>>
'ALERT: Required and Recommended Patch Levels For All Discoverer Version'.
2. Increase the maximum JVM heap memory:
In general, the default values for the minimum heap (-Xms) memory and
maximum heap (-Xmx) memory are sufficient.
However, if your organization consistently runs large Discoverer queries
then you may benefit from increasing the maximum heap memory from the
default values.
This is recomended if your users are typically running large queries via
Discoverer Viewer.
Increasing the JVM memory can help to avoid "java.lang.OutOfMemoryError"
in Discoverer Viewer:
Please see <<Note 563960.1>>, Best Practice: Configuring The
OC4J_BI_Forms JVM For
Discoverer Viewer/Portlet 10g Performance And Stability for specific
details.
3. Disable Query Prediction:
Query Prediction provides an estimate of the time required to retrieve
the information in a query.
The Query Prediction appears before the query and consumes time.
Edit the <oracle_home>/discoverer/util/pref.txt on the middle-tier
server and set:
QPPEnable=0
Also set:
QPPObtainCostMethod = 0
4. Uncheck the 'Enable fantrap detection' checkbox.
When the box is checked, every query generated by Discoverer is
interrogated. Discoverer will detect a fan trap and rewrite the query to
ensure that the aggregation is done at the correct level.
Please refer to <<Note:210553.1>>, Oracle BI Discoverer: Fan Trap
Resolution - Correct Results
Everytime for more information on fantraps.
To disable, in Plus go to Tools -> Options -> Advanced -> Fan Trap
settings.
In Viewer go to Preferences and uncheck the box.
5. Disable Materialized Views/Summaries
In pref.txt add parameter:
MaterializedViewRedirectionBehavior = 0
Value equal to 0 ensures that Materialized View (MV) Redirection is
always performed when MVs are available.
6. Improve query performance by optimizing the SQL.
In pref.txt modify/add following parameters:
SQLFlatten = 0
SQLItemTrim = 0
SQLJoinTrim = 0
UseOptimizerHints = 0
If value of SQLFlatten is 1 then Discoverer will merge inline views in
the query SQL where ever possible.
In case of SQLItemTrim, Discoverer will remove unused folder items from
the query SQL where possible and for SQLJoinTrim Discoverer will remove
unnecessary joins from the query where possible.
UseOptimizerHints will add Optimizer hints to SQL if set >
0.Unnecessarily making Discoverer perform these checks consumes
resources and rather than increasing the performance may reduce the same. So unless you feel these checks have to be performed depending on
requirements, assign zero to these parameters.
7. When Discoverer builds a query, Discoverer makes a database security
check to confirm that the user has access to the tables referenced in
the folders. Avoiding this check can save time.
So in pref.txt underDatabase section add:
ObjectsAlwaysAccessible = 1
8. Whenever you are creating conditions, ensure that you match the Case.
This in turn can reduce the time Discoverer spends on changing the Case
and matching.
For example:
option Upper(Department) in (Upper('VIDEO SALES')
9. Ensure that summaries are refreshed periodically in Discoverer
Administrator.
10. Increase the amount of memory available for the Discoverer data cache. Please refer to <<Note 245752.1>>, Explaining Oracle BI Discoverer
Session Memory Management
And Server Cache Settings.
11. Performance may be enhanced by enabling OracleAS Web Cache.
==================================================================
Thanks for your reply....................
Regards, -
Exporting to PDF fails for a report
Hi,
One of my reports no longer exports to PDF. When run through our ERP system it looks as if it's exporting but the progress popup window quickly dissappears. When we go to the location where the exported file should be nothing is there.
I tried opening up the report in the Crystal 11 and exporting from there. I get the following two error messages:
Failed to export the report.
Not supported
This was working yesterday. The only thing I did was to add the u2lbar.dll to the bin folder and copy over the barcode font so that we could display barcodes on this report. However, even if I comment the line to do the barcode I still get the same problem.
Thanks,
JonThe font you are using probably doesn't have embedding permissions.
hth,
- Ido -
Export to PDF fails for FR - EPM 11.1.2
Looking at server noticed that the HRPrinters1-5 were created but going to non-existant directory d:\hyperion\...\pdfoutput\ Should be going to d:\oracle\middleware\...\pdfoutput. Had to delete hrprinters1-5, edit Oracle\Middleware\EPMSystem11R1\products\biplus\bin\hrcreateprinters.ini and hardcode the correct directory, run hrcreateprinters.exe in same directory, restart printer service, test export to pdf successful.
Hello Kuno,
please try to find out more details.
You say it is data dependent. Could you be a bit more specific. What data work or do not work ?
As a good test pls see if our samples reports work. They come with a default installation. If you do not have them any more - get them from [here|https://smpdl.sap-ag.de/~sapidp/012002523100005852352008E/cr_xi_xtreme_rep_smpl_en.zip].
Can you display and export them ? Do you get the same error ?
Thanks in advance
Falk -
Can't get messages to backup using COBRAS Export with Unity Connection 7.x
Hi All,
I am trying to do a message export using COBRAS on Connection 7.1.3, but it errors out saying this...
7/6/2011 12:23:05 PM: ** Testing IMAP connectivity to Connection server for message extraction **
7/6/2011 12:23:06 PM: (error) Failed to connect to remote mailstore with super user IMAP access - unable to backup messages.
IMAP client error=ChilkatLog
ConnectionType: Unencrypted TCP/IP
loginResponse: aaab NO Logon failure: unknown user name or bad password.
Received failed login response from IMAP server
Failed.
I'm assuming something needs to be configured to allow my System Administrator/Remote Administrator user to access the messages. Any tips on how to get this working would be greatly appreciated.
Thanks,
GarrettI was able to get this to work. Had to use the original administrator account and not a user with the same roles.
-Garrett -
Unity Uprgade COBRAS Export getting and error
Getting this message when I tried to start the COBRAS Export "Could not attach to DOH for message extraction - be sure you are logged in as the account associated with the CsMgr service before selecting this option."
Hi,
i have a user ,say Jbloggs that requires access to COBRAS tool. I have given him relevant permissions to run the tool and it works ok however if he includes to back up messages he gets the 'not associated with account running avcsmgr' . (as above).
If I was to give jbloggs account the same exchange rights as UnitymsgStoreSvc account would that be sufficient? What I dont want is to re run permissions wizard and find that all critical services are running with jbloggs account (albeit I can manually change these afterwards back to the service accounts).
Does the system just check rights or does it check what the AVCMGR service is running with?
Kind Regards
Jaginder -
Payload Validation failing for EBM
Hi,
I have a composite which takes input based on a simple XSD.
Inside the composite the input is mapped to Sales Order EBM and this EBM is sent as input to other composite.
For data validation purpose, I switched on Payload Validation for this composite in Weblogic EM.
The input data validation works fine but it's throwing follwing error while invoking composite which accepts EBM as input.
<fault>
<bpelFault>
<faultType>0</faultType>
<remoteFault>
<part name="summary">
<summary>oracle.fabric.common.FabricInvocationException: Schema validation failed for message part payload. Please ensure at the message sender level that the data sent is schema compliant.</summary>
</part>
<part name="detail">
<detail>Element 'ProcessSalesOrderFulfillment' not expected.</detail>
</part>
<part name="code">
<code>null</code>
</part>
</remoteFault>
</bpelFault>
</fault>
The payload validation error is occuring for all composites which accepts EBM as input. It picks the attribute name just after the header and says element not expected.
Any help is greatly appreciated.
Thanks,
RaviPlease ensure that you have created EBS properly, verify all the datatypes of the elements in input XSD & EBO schema. And also verify whether EBM header is reflecting properly.
One more thing you should able to navigate from EBS to EBM, EBM to EBO then only you can assume you have done all things correctly. If not reconstruct EBS, EBM & EBO with valid request & response messages. -
I have upgraded my COBRAS Export for Unity to 7.o build 120 over the weekend and ran a backup on 2 different fail over pairs. In preparation to import the users to Connections 8.6.
When I use COBRAS Database Viewer to remap the alias it will bring in all the users and when I Apply the changes it get hung and just stops responding.
Has anyone else seen this? Do I need to back down a version of the export tool?the version of export will have no impact - the Access database file remains the same across all versions for all platforms regardless and this is all that matters to the viewer tool, so that's not a productive avenue.
I'd need to see your backup and/or CSV file to speculate further - not much I can do with "it doesn't work". I just tried some backups I have lying around here and updating the extension and alias via CSV worked ok so presumably something in a name/alias string is likely not being escaped properly (i.e. a special character burning it) or the like but it's hard to say without some more details to work with. -
Subsequent COBRAS Exports fail, subscribers not found
4.2(1)Unity Voicemail Only with Dedicated Offbox Exchange Message Store. Failover Monitor indicates this server VM01 is Running;Active.
First time I ran COBRAS it found the 985 subscribers and took 1 hr 30 minutes.
================================================================
Running COBRASExport, version 7.0.106
Running COBRAS Export logged in as: VM\svc_unitymsg
Local Unity version=4.2(1.0)
Local Unity server name=VM01
Local subscriber count=985
Local call handler count=31
Local distribution list count=11
Local interview handler count=2
Local routing rules count=8
Local time=5/17/2011 8:12:10 PM
Second and other times I run COBRAS it doesn't find the subsribers and takes 10 minutes
================================================================
Running COBRASExport, version 7.0.106
Running COBRAS Export logged in as: VM\svc_unitymsg
Local Unity version=4.2(1.0)
Local Unity server name=VM01
Local subscriber count=0
Local call handler count=0
Local distribution list count=0
Local interview handler count=0
Local routing rules count=0
Local time=5/21/2011 7:00:00 PM
Why is COBRAS no longer finding subscribers?Cripes, I found the problem. Someone turned CSA back on….
Event Type: Information
Event Source: CSAgent
Event Category: Kernel Rule
Event ID: 256
Date: 5/22/2011
Time: 7:13:57 PM
User: N/A
Computer: VM01
Description:
The process 'D:\Program Files\Cisco Systems\COBRAS\COBRAS Export for Unity\COBRASExport.exe' (as user VM\svc_unitymsg) attempted to call the function OpenProcess("D:\Program Files\Cisco Systems\COBRAS\COBRAS Export for Unity\wavcat.exe") from a buffer (the return address was 0x503f7d). The code at this address is '088b0851 6aff6800 001000e8 4f41f1ff 8945d4ff 157c1040 008b55d4 8955dcc7' This either happens when a process uses self-modifying code or when a process has been subverted by a buffer overflow attack. The user was queried and a 'Terminate' response was received. The response was the default taken after a timeout. -
SCCM 2012 Export Task Sequence fails with generic error message
We have a complex task sequence comprising of more than 50 applications\packages, 1975 drivers, 18 driver packages etc etc. Its long, it's big and it will not export with it's content.
We have several environments for development test and live. I am attempting to export the primary task sequence with all it's dependencies from live so that I can port it over to a new development environment.
I can export the zip file without content and it comes to 92Mb in size. The entire task sequence software set is 50Gb+. When I attempt to export with all dependencies and content the process gets about 60% of the way through and fails with the error
"Error: The filename, directory name, or volume label syntax is incorrect"
Googling the error roughly defines the problem as 'the export process cannot access the defined source path for one of the dependant items'
I wrote a PowerShell script that looks as every application, package, driver, driver package, boot image, os image and software update package in the entire SCCM software library and verifies that each and every package has a valid UNC source directory
that can be reached using test-path.
I also wrote another tool that parsed the entire source software library on the server looking for permissions errors (permissions on the structure set at a directory level rather than inherited), directories that were too long, inaccessible or otherwise
blocked, nothing was found.
It will take a very long time to go through and check each and every dependency by hand - time I do not have at present.
I looked in the TaskSequenceProvider.log as that is supposed to contain messages from the export process and found the messages in there far too high a level to use
=======================
<![LOG[Setting status complete: status code = 0x0; ]LOG]!><time="13:00:41.161-60" date="08-26-2014" component="TaskSequenceProvider" context="" type="1" thread="4168" file="exterror.cpp:128">
<![LOG[[PID: 3500] Invoking method SMS_TaskSequence.ExportXml]LOG]!><time="13:00:42.339-60" date="08-26-2014" component="TaskSequenceProvider" context="" type="1" thread="4168" file="wmiprovider.cpp:333">
<![LOG[[PID: 3500] Done with method SMS_TaskSequence.ExportXml]LOG]!><time="13:00:42.341-60" date="08-26-2014" component="TaskSequenceProvider" context="" type="1" thread="4168" file="wmiprovider.cpp:352">
<![LOG[Setting status complete: status code = 0x0; ]LOG]!><time="13:00:42.341-60" date="08-26-2014" component="TaskSequenceProvider" context="" type="1" thread="4168" file="exterror.cpp:128">
<![LOG[[1AFF658 PID:3500] Received shutdown request from WMI]LOG]!><time="13:01:36.036-60" date="08-26-2014" component="TaskSequenceProvider" context="" type="1" thread="5592" file="wmiprovider.cpp:399">
<![LOG[[1AFF658 PID:3500] Initializing provider for namespace root\sms\site_P01]LOG]!><time="13:02:36.550-60" date="08-26-2014" component="TaskSequenceProvider" context="" type="1" thread="7068"
file="wmiprovider.cpp:90">
<![LOG[[1AFF658 PID:3500] Initialization of provider for namespace root\sms\site_P01 succeeded]LOG]!><time="13:02:36.551-60" date="08-26-2014" component="TaskSequenceProvider" context="" type="1"
thread="7068" file="wmiprovider.cpp:107">
<![LOG[[PID: 3500] Invoking method SMS_TaskSequence.LoadFromXml]LOG]!><time="13:02:36.554-60" date="08-26-2014" component="TaskSequenceProvider" context="" type="1" thread="7068" file="wmiprovider.cpp:333">
<![LOG[[PID: 3500] Done with method SMS_TaskSequence.LoadFromXml]LOG]!><time="13:02:36.558-60" date="08-26-2014" component="TaskSequenceProvider" context="" type="1" thread="7068" file="wmiprovider.cpp:352">
<![LOG[Setting status complete: status code = 0x0; ]LOG]!><time="13:02:36.559-60" date="08-26-2014" component="TaskSequenceProvider" context="" type="1" thread="7068" file="exterror.cpp:128">
<![LOG[[PID: 3500] Invoking method SMS_TaskSequence.ExportXml]LOG]!><time="13:03:05.428-60" date="08-26-2014" component="TaskSequenceProvider" context="" type="1" thread="7068" file="wmiprovider.cpp:333">
<![LOG[[PID: 3500] Done with method SMS_TaskSequence.ExportXml]LOG]!><time="13:03:05.431-60" date="08-26-2014" component="TaskSequenceProvider" context="" type="1" thread="7068" file="wmiprovider.cpp:352">
<![LOG[Setting status complete: status code = 0x0; ]LOG]!><time="13:03:05.431-60" date="08-26-2014" component="TaskSequenceProvider" context="" type="1" thread="7068" file="exterror.cpp:128">
<![LOG[[1AFF658 PID:3500] Received shutdown request from WMI]LOG]!><time="13:03:36.369-60" date="08-26-2014" component="TaskSequenceProvider" context="" type="1" thread="7068" file="wmiprovider.cpp:399">
====================
Is there any way of increasing the log verbosity? I need to see what item is causing the export to fail.
Is there another log containing the information about the export & what it is doing?
All out builds that use the task sequence complete successfully, we can edit the sequence fine, make changes etc. so no internal corruption we can find.
Any ideas?Torsten, smsprov.log did indeed prove useful, I could see every package as it was validated. Unfortunately the log was wrapping about every 4 minutes and it takes 3+ hours for the task sequence to reach the fail point so I still cannot see the offending
package as it wraps before I can get to the log.
I will increase the size of the log and see if I can maintain some details to investigate.
There was nothing of note in the event logs, certainly nothing leading me to suspect that WMI might be reaching its limits.
I will keep looking for the cause and will post here when I find it <= positive thinking :) -
Cannot export video clips. Get message: "unable to create video for export"
Cannot export video clips from iPhoto to Finder folder. Export fails with message "unable to create video for export: "
The video clips play correctly within iPhoto.
Software: iPhoto version 9.5 on OSX 10.9
Hardware: Retina Macbook Pro 2.3 i7 8GBYes. I have 3,184 video clips in this library. I tested Reveal function by randomly selecting individual video clips and in every case the Reveal in Finder function worked correctly. I also tested this on random selections of groups of video clips and, again, the Reveal function worked correctly in every case.
Some more info that may be relevant:
I have multiple iPhoto libraries. My "main" library is very large (~30,000 files) and is located on an external hard drive (2TB WD) which is connected via USB.
The problem reported here is occuring on that "main" library. I have not opened any other iPhoto library since installing the new release.
While the File>Export function does not work, I have been able to simply copy and paste video clips from iPhoto library to a folder on Mac hard drive. It appears that meta data is copying correctly along with the video content.
I am able to import these copied video clips to iMovie. Meta data is imported along with the video content and I'm able to perform iMovie editing functions on those clips without any problems.
In summary, the File>Export function still fails with the message "unable to create video for export." Copying video clips and pasting them to interim folder seems to be a viable workaround enabling me to extract video clips from iPhoto for import to iMovie. I will run additional tests to see if I can find a pattern to the video files that are being rejected by iPhoto Export function. -
Fail the message in PI, on validation failure
Hi all,
We are working on PI 7.4 SP07 single stack system.
For a particular interface (File(FTP)-->PI-->ABAP Proxy) the requirement is to fail the message in PI and raise an alert if the value for a specific field (say BatchID) in the source file is maintained in lower case.
What is the best way to achieve this requirement.
Please share your thoughts and inputs.
regards,
YounusHi Yonus,
I would recommend the below option rather than failing the mapping in PI .
Check the condition and notify to Business for condition failure .So that they can correct the file and places again
1)Use the Enhanced Receiver Determination and check the condition based on this open either mail or ECC Business component/Business system.
2)Create 2 mappings one for mail and other for ABAP Proxy communication.
There is also an option to fail @ mapping level by throwing a custom exception .
throw new StreamTransformationException("$$$BatchID field value is in lower case$$$");
Regards
Venkat
Maybe you are looking for
-
Flash with QT 7.3 works in Safari, but not in Firefox
Like many others here, I have been having issues with the upgrade to QT 7.3 and Flash. I've followed a few different suggestions from here on the forums, but I've only been able to get Flash working in Safari; Firefox remains mysteriously broken. Has
-
Photo albums not deleting from my iphone 6
Photo albums not deleting from my iphone 6 even after i remove them from itunes. plus it shows as others in the storage. how to remove the albums ? i removed them from the itunes linked folders though it still shows on the iphone !!!
-
Should i call apple for three broken ipods in a row?
i got this ipod touch from best buy and it just stopped working, then i returned it to get a refurbished one and it had sound problems, and then i returned that one and the one i have now has a touch screen that doesnt work. it wont press certain let
-
Hi. I need to know what is "data class". I am aplying a hot package in SAP, and it generated a error because el data class USR34 not exists associated with cdhdr table. The note says that I must create it, but I don´t know how I must to do it. And I
-
Downloading and installing FMMS
Im trying to find FMMS to install but cannot find it, ive found and installed fAPN. Any help would be great please. Just cannot see it in the apps manager list at all.