Unity Connection 1.2(1) which has SCCP ports with CallManager 8.5(1)SU1.

For 24 hours I’d like to run Unity Connection 1.2(1) which has SCCP ports with CallManager 8.5(1). Unity Connection 1.2 isn’t supported anymore, we are migrating to Unity Connection 8.5(1) but I wanted to do CallManager 4x to 8x upgrade the first night, and Unity Connection 1.2 to 8.5 upgrade the second night. All new hardware so using DMA and COBRAS.
I'm not looking for it to be "Supported" just want it to work 24 hours while migrating...
Unity Connection 1.x Compatability Matrix will likely never show CallManager 8.5 since UC 1.x is EoL
http://www.cisco.com/en/US/docs/voice_ip_comm/connection/compatibility/matrix/cucsccpmtx.html
Jason Aarons
CCNP/CCDP/CCVP
Consultant

The primary factor in the integration here for SCCP is the TSP version. You can verify the version of TSP running on Unity Connection with the procedure noted here: http://www.cisco.com/en/US/docs/voice_ip_comm/connection/1x/release/notes/121sr2ucrn.html#wp37944
It's a Windows box so the procedure is the same as with standard Unity. Check the properties of AvSkinny.tsp in the \Windows\System32\ folder path.
If you don't care about official support and it's only temporary then I'd say check to ensure that TSP is fairly recent and, if needed, upgrade to the latest release available for install on CUC 1.2(1). Run a number and tests and make sure 1) things function as expected and 2) you don't get a load of TSP errors in the system/application logs.
Cisco notes that product support is based primarily on testing and since Unity Connection 1.2(1) is outdated and CUCM 8.5(1) is brand new, it's not likely that this combination will be tested anytime soon ... but the TSP compatibility between 8.0 and 8.5 is likely to be similar if not the same.
Hailey
Please rate helpful posts!

Similar Messages

Okay so my Ipod Touch is connected to my computer which has charged my ipod before. Now when i plug it in, my ipod doesnt charge unless i move the charger around. Should I get a new charger, or what?

Okay so my Ipod Touch is connected to my computer which has charged my ipod before. Now when i plug it in, my ipod doesnt charge unless i move the charger around. Should I get a new charger, or what?

I could be the cable or it could be that the connecor in the iPod is damaged. If the iPod is the problem replacing the cable will not help. Look at the dock connector on the iPod and the contacts on the cable.

I have had IPhones since their inception. Last phone was the 5. A few months ago, I upgraded to the 6 Plus. Here is my issue. On my 5, my car radio (which has USB port) allowed me to plug in and listen to radio or music from my phone and the bonus

I have had IPhones since their inception. Last phone was the 5. A few months ago, I upgraded to the 6 Plus.
Here is my issue.
On my 5, my car radio (which has USB port) allowed me to plug in and listen to radio or music from my phone and the bonus was it charged the phone as well. All worked great.
Now with the 6 Plus, neither of things work. The message on the radio (Kenwood) says I Pod error. The message on my phone say's "this device is supported".
I have called on this before and was told you are aware and that the issue will be addressed in a future update. There have been several updates on IOS 8 and the issue remains.

I have a Kenwood KDC-X695. When I purchased this stereo and had it installed, I had an ATT iPhone 4.
It worked with the stereo, but had a few issues. I had purchased a few audio books that I would listen to while driving. When I plugged it in it would immediately begin to play the book from the beginning or if I had been listening to music, it would start playing the song that was at the top of the song list.
The stereo came equipped with Firmware version 3.05. I upgraded to the iPhone 5 a year later. I had that phone for approximately 2 years. The song or book issue remained the same.
I just recently upgraded to the iPhone 6 and the Bluetooth function still works, however the USB port on the stereo that the phone plugs into to allow files on the phone to play through the stereo no longer works.
I contacted the service provider (Verizon) and after speaking to several different technical support technicians, they provided me the phone numbers for Kenwood and Apple because they were unable to help me.
I spoke with Kenwood technical support the following day and after a few fumbling miscues from the technical advisor, it was suggested that I upgrade the firmware, even though the Kenwood literature warns against this if the Bluetooth portion is working, because if there is a problem with the upgrade, it can render the Bluetooth useless and non-functional. The advisor did suggest the latest firmware on the second or third attempt, after I pointed out what I was able to glean from my initial search.
Later that day, I went back to the Kenwood site (from their homepage) and by using their selection tools, discovered that this particular model was only ever intended to be used with the iPhone 4S (the technical advisor was not aware of this, even though I mentioned this during my phone call earlier in the day). According to the Firmware selection tool, my iPhone 5 should not have worked with it.
I performed the Firmware upgrade, and it took 13 minutes. This was less than the 15 minutes that was forecast in the Kenwood literature. The Bluetooth still works but the USB cable connection still causes the unsupported device message that I received prior to the upgrade. I am incredibly annoyed and disappointed.
By upgrading to the iPhone 6, I have three choices; (1) only use the Bluetooth for phone calls without the ability to play other files from my iPhone 6 (2) forced obsolescence of my stereo, requires buying a new stereo (3) return my iPhone 6 and go back to my iPhone 5.
I do not believe that I should have to be a software/Firmware/hardware engineer, vetting every single device that I own; prior to upgrading a cell phone.
I am incredibly annoyed with Apple at the moment.
I have a separate Bluetooth headset that worked with both my iPhone 4 and iPhone 5 that the iPhone 6 simply does not recognize. That is another story for another time.
Currently, I am incredibly underwhelmed with Apple.

1. I have an iPod which has purchases synced with I tunes with an apple ID. I now have an iPad with a new ID for cloud. I have cloud storage capacity of 5gb which came with the iPad. How can I use one ID and store my existing music in cloud?

1. I have an iPod which has purchases synced with I tunes with an apple ID. I now have an iPad with a new ID for cloud. I have cloud storage capacity of 5gb which came with the iPad. How can I use one ID and store my existing music in cloud?

HI Frostyfrog
CHeck out iTunes Match which has an annual fee of £21 or thereabouts. You can store a maximum of 25,000 songs there and they all become available on your other kit, iPhone, iPad and iPod. I know it works as I have over 23000 songs uploaded of which only a few we're bought through iTunes.
it works by comparing your music to the whole iTunes music dadata base so you access the same tunes that you could get from iTunes. If you have obscure stuff, it uploads your own music to the cloud as a copy.
I Find it incredible that on my iPhone with its 16gb memory I can view almost 200 gb of music (ie my 23000 songs) and play any of them. Anything I add to iTunes becomes available via the cloud fairly quickly from a few minutes or a little longer if adding a lot.
The first time you use it it will take quite a while to match your music if you have a lot, but after that it is all automatic. Read the stuff on the apple site. Your PC needs to be at least running Vista. I recommend it and at less than 50p a week it's good value.
Good luck

How can i export the data to excel which has 2 tables with same number of columns & column names?

Hi everyone, again landed up with a problem.
After trying a lot to do it myself, finally decided to post here..
I have created a form in form builder 6i, in which on clicking a button the data gets exported to excel sheet.
It is working fine with a single table. The problem now is that i am unable to do the same with 2 tables.
Because both the tables have same number of columns & column names.
Below are 2 tables with column names:
Table-1 (MONTHLY_PART_1)
Table-2 (MONTHLY_PART_2)
SL_NO
SL_NO
COMP
COMP
DUE_DATE
DUE_DATE
U-1
U-1
U-2
U-2
U-4
U-4
U-20
U-20
U-25
U-25
Since both the tables have same column names, I'm getting the following error :
Error 402 at line 103, column 4
alias required in SELECT list of cursor to avoid duplicate column names.
So How can i export the data to excel which has 2 tables with same number of columns & column names?
Should i paste the code? Should i post this query in 'SQL and PL/SQL' Forum?
Help me with this please.
Thank You.

You'll have to *alias* your columns, not prefix it with the table names:
$[CHE_TEST@asterix1_impl] r
1 declare
2    cursor cData is
3      with data as (
4        select 1 id, 'test1' val1, 'a' val2 from dual
5        union all
6        select 1 id, '1test' val1, 'b' val2 from dual
7        union all
8        select 2 id, 'test2' val1, 'a' val2 from dual
9        union all
10        select 2 id, '2test' val1, 'b' val2 from dual
11      )
12      select a.id, b.id, a.val1, b.val1, a.val2, b.val2
13      from data a, data b
14      where a.id = b.id
15      and a.val2 = 'a'
16      and b.val2 = 'b';
17 begin
18    for rData in cData loop
19      null;
20    end loop;
21* end;
for rData in cData loop
ERROR at line 18:
ORA-06550: line 18, column 3:
PLS-00402: alias required in SELECT list of cursor to avoid duplicate column names
ORA-06550: line 18, column 3:
PL/SQL: Statement ignored
$[CHE_TEST@asterix1_impl] r
1 declare
2    cursor cData is
3      with data as (
4        select 1 id, 'test1' val1, 'a' val2 from dual
5        union all
6        select 1 id, '1test' val1, 'b' val2 from dual
7        union all
8        select 2 id, 'test2' val1, 'a' val2 from dual
9        union all
10        select 2 id, '2test' val1, 'b' val2 from dual
11      )
12      select a.id a_id, b.id b_id, a.val1 a_val1, b.val1 b_val1, a.val2 a_val2, b.val2 b_val2
13      from data a, data b
14      where a.id = b.id
15      and a.val2 = 'a'
16      and b.val2 = 'b';
17 begin
18    for rData in cData loop
19      null;
20    end loop;
21* end;
PL/SQL procedure successfully completed.
cheers

I have a Maxtor 3200 which has stopped communicating with my iMac for no reason can you help i'am running the latest system

I have a Maxtor 3200 which has stopped communicating with my iMac for no reason can you help i'am running the latest system

I have never seen this before. Try using these installers
Flash Player for ActiveX (Internet Explorer)
Flash Player Plug-in (All other browsers)

Can I connect iphone 5 bluetooth (which has 4.0) to a 2.1 device in my car?

I have a 4th generation ipod touch right now which I use to connect to my cars stereo system which has bluetooth 2.1. If i upgraded to an iPhone 5 which has BT 4.0 would I still be able to use it on my cars stereo system? Thanks

It should.

Have brand new iPad 2 16G 3G and can't get past the first screen saying 'connect to iTunes' even though the usb is connected to my computer which has iTunes downloaded. We bought 3 iPads and I configured my sons ok but the other 2 are not working.

HELP!!!!

alanfromnewtownards wrote:
Try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. When the screen goes blank power On again in the normal way.] It is absolutely/appsolutely safe!
If that doesn't work the OP could try the suggestions in this knowledge base article:
http://support.apple.com/kb/TS1538
which is for Windows. This is for the Mac platform:
http://support.apple.com/kb/TS1591

Unable to load external swf which has runtime sharing with another swf.

Hi,
I am getting issues on loading external swf say "importer.swf" file into another swf file say "loader.swf" for second time like
ReferenceError: Error #1065: Variable testSymbol is not defined. VerifyError: Error #1014: Class testClass could not be found.
at global$init()
In the external swf "importer.swf", i am trying to import the symbol "testSymbol" from another swf file say "exporter.swf", which exports through runtime sharing option for the symbols.
I am having some buttons in loader.swf file and on each button click i am loading different swf files into the loader.swf after unloading the previous one.
I am able to load and unload different swf files but unable to load the importer.swf file which is sharing symbols from external swf and that too for the second time i.e., when i click the button twice.
When trying to debug with flash debugger, all the other swf files are being unloaded before loading of another swf but the swf which is sharing symbols/classes with another swf is not getting unloaded.
Output when i am trying to load two files example and importer files into loader.swf file on two different button clicks. On first button click example.swf is loaded. On second button click , example.swf is unloaded and importer.swf is loaded which is successful. On first button click again importer.swf is unloaded and example.swf is loaded. On second button click again, example.swf is unloaded and importer.swf is loaded, here i am getting issues shown above.
Attemping to launch and connect to Player using URL D:\runtime issue\loader.swf
[SWF] D:\runtime issue\ loader.swf - 8181 bytes after decompression
[SWF] D:\runtime issue\example.swf - 441708 bytes after decompression
[UnloadSWF] D:\runtime issue\example.swf
[SWF] D:\runtime issue\importer.swf - 1920 bytes after decompression
[SWF] D:\runtime issue\importer.swf - 441708 bytes after decompression
[SWF] D:\runtime issue\ example.swf - 441708 bytes after decompression
[UnloadSWF] D:\runtime issue\ example.swf
[SWF] D:\runtime issue\importer.swf - 1920 bytes after decompression
ReferenceError: Error #1065: Variable xxxxxx is not defined.
Debug session terminated.
Code i am using
b1.addEventListener(MouseEvent.CLICK, b1Clicked);
b2.addEventListener(MouseEvent.CLICK, b2Clicked);
var ldr:Loader;
function b2Clicked(e:MouseEvent)
    if(ldr != null)
        ldr.unloadAndStop(true);
    ldr = new Loader();
    ldr.load(new URLRequest("importer.swf"));
    addChild(ldr);
function b1Clicked(e:MouseEvent)
    if(ldr != null)
        ldr.unloadAndStop(true);
    ldr = new Loader();
    ldr.load(new URLRequest("example.swf"));
    addChild(ldr);
If i try to open the swf using IE, i am not getting any issues at all. But i need to open this loader.swf in a air application. Also when i use loaderContext for the loader instance i am able to get rid of this issue but i cant use it in my application.
So, please help me in resolving this issue.
Thanks

I got my answer. I had to append the photo url to the 'movie' value of the javascript embed method. Like this:
<script language="JavaScript" type="text/javascript">
   AC_FL_RunContent(
      'codebase', 'http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=10,0,0,0',
      'width', '550',
      'height', '400',
      'src', 'lesson2',
      'quality', 'high',
      'pluginspage', 'http://www.adobe.com/go/getflashplayer',
      'align', 'middle',
      'play', 'true',
      'loop', 'true',
      'scale', 'showall',
      'wmode', 'window',
      'devicefont', 'false',
      'id', 'lesson2',
      'bgcolor', '#ffffff',
      'name', 'lesson2',
      'menu', 'true',
      'allowFullScreen', 'false',
      'allowScriptAccess','always',
      'movie', 'lesson2?photo=http://www.flash-mx.com/images/image1.jpg',
      'salign', ''
      ); //end AC code
</script>
Thanks,
srb.

HT2693 Does anybody know what to do when you purchased a app from iTunes but some how enough funds were not available although I have 4 back up sources for payments. Which has left me with a balance to iTunes for 4.98.

I can't get any updates for my apps. I can't connect apps to Facebook and I can't even play some game they won't load all because iTunes must have been trying to take funds for a purchase. Although it doesn't tell me what purchase. Just that I owe them 4.98. I've written to them ten times and can't get them to understand this simple fix.."take your money". I even went as far as making a call to Apple which is no longer covered under my terms. 35.00 for a phone call. Only to find out it iTunes holding up everything with both my iPhone 4Gs and my iPad 2.
iTunes is telling me all this crap but not taking the money. I'm pretty clear as to what the problem is. But for some reason they just can't understand me.
So, how do you send iTunes 4.98 to clear your account? You can't.....I can't even purchase anything until they take the stupid money and hold off my account. But I'm getting no where with any of the people at iTunes. It sure seems simple to me but I guess it's not for them.
Anybody know what I can do????
Thank you,
Michelem0918

Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

Officejet Pro 8610 - Can't connect to wireless network (and has similar issue with previous printer)

When I returned from a trip, I was unable to connect to my trusty HP All-in-one 7510 that I had on my network for three years. I tried troubleshooting it, reinstalling the software on numerous computers, and fixing the printer, but alas the printer said that it was connected to the network, and none of my computers wanted to find it anymore.
Then I bought my new Officejet Pro 8610 this week, set it up...and I am experiencing the same issue. I tried using the link and support took from this post - http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/Officejet-Pro-8610-Can-t-connect-to-wi... but the printer was unable to be found on the network.
I would appreciate any help on this issue. Thanks!

Hello @Celestialnova ,
Welcome to the HP forums.
I understand that you are having problems with your wireless network.
I would like to help.
Since the same issue happened with two different model of printers, lets take a moment to check the network.
Run through the following document.
Printer Does Not Maintain Wireless Connection
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

How to get rid of zeros for the data which has been extracted with open hub

Hi all
I am trying to extract data from the cube thru an open hub, but the data which i have extracted, for a cost center i am able to see '0's which is expected to be an empty space, even in cube there is an empty space.
Can anyone suggest me quickly, points will be rewarded
thanks
preethi......

In the transformation of the Open Hub,use BAPI....
Create a target structure with all fields as type characters,move data from source structure to target structure in the BAPI using ABAP codes.When there is no value in character fields it would not show up 0's.

Please could anybody has a sol, to bring images to the report for all employees which has no reference with images stored in some path

Hi Obiee experts,
I have placed the images in below locations and these images are independent and has no reference to the employee id column in dimension table.but my client requires report with all the employees,with respect to the images.Could anybody can give me a solution for this.
    1) root: \apps\Middleware\user_projects\domains\bifoundation_domain\servers\bi_server1\tmp\_WL_user\analytics_11.1.1\7dezjl\war\res\s_blafp\images
   2) root: \apps\Middleware\Oracle_BI1\bifoundation\web\app\res\s_blafp\images
   3) root: \apps\Middleware\instances\instance1\bifoundation\OracleBIPresentationServicesComponent\coreapplication_obips1\analyticsRes
Thanks in Advance
kumar

Hi Sreeni,
The images are stored with employee ids reference like 1234.jpg in the image location path, so will it be possible to call those images into the report with no relation at database level.
as you said in above mail even if if we cld try to store the images in oracle database with format like CLOB format the rpd will not support the datatype to bring to that report level.
Please let me know if you have any solution
Thanks in Advance
kumar

Websites which has smooth scrolling with 3.6.15 are now jerky. IE8 is ok on these sites. (ex: ebay)

Acts as if my machine is too slow or does not have enough memory but all was fine in Firefox 3.6.15 and still is in IE8. Very annoying trait.

See:
* http://kb.mozillazine.org/Website_colors_are_wrong
* http://kb.mozillazine.org/Websites_look_wrong
Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
* [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

Recently i upgraded my operating system from snow leopard to mavericks. no my adobe creative suite 4 programs do not launch. it gives me an error code of 150.30 which has to do with licensing. I tried to download adobe license repair app but

Recently I upgraded from snow leopard to Mavericks . Since the upgrade my Adobe Creative Suite 4 will not launch any programs. I downloaded adobe license recovery it says " this program is no longer supported " .
At this point I am ready to go back to snow leopard if that will fix the problem. What do I do ?

A long thread with some fixes for various problems including licenseing, it may help.
https://discussions.apple.com/message/24181438#24181438

Unity Connection 1.2(1) which has SCCP ports with CallManager 8.5(1)SU1.

Similar Messages

Maybe you are looking for