Unity Connection 8.5.1 MWI issue with French Locale

Hi There,
I am experiencing issues with MWI while using french locale on CUC 8.5.1. While, it works perfectly fine with English (US).
CUCM version is 8.0.3. Any ideas will be much appreciated.
Regards,
Sami

Hi Armin,
You could be seeing this behavior due to this bug;
Incorrect locale version cause VM outage
CSCtq97240
Symptom:
Unity connection 8.5.1 installed with locales may experience the following issues
1.When users try to leave message ,they get the fail safe message
2.Sometimes they are able to leave message , message doesnt get delivered and no MWI
Conditions:
When Locale version ES 24 is installed on UC 8.5(1) [ ES 16] or less
Workaround:
please downgrade the locale version to ES 16 if you have 8.5(1)SU1 or use US English language.
Though the Release notes of 8.5(1)
http://www.cisco.com/web/software/282074314/49311/851su1cucrm.pdf
clearly mentions about the compatibility , Many customers think its good for them to install the latest locale ES and hence end with this condition.
This is the compatibility matrix for locales
========================================
a) No locales are available for Connection 8.5(1) base version only.
b) Locale SU1 is supported with Connection 8.5(1)SU1.
c) Locale ES 24 is supported with Connection 8.5(1)ES 17 to ES 36 only.
d) Locale ES 24 is not tested for Connection 8.5(1)ES 37 to ES46.
e) Locale 8.5(1)SU2 is supported with Connection 8.5(1)SU2 only. Not all locales available as of now
f) Locale 8.5(1)SU3 is supported with Connection 8.5(1)SU3 only. Only Japanese is available as of now.
g) Locale 8.5(1)ES72 is supported with Connection 8.5(1)ES72 only. Only Brazilian-Portuguese is available as of now.
Cheers!
Rob
"Your life is worth much more than gold."
- Bob Marley

Similar Messages

Cisco Unity Connection 8.5(1) MWI/Notifications issue

Hi,
I think i got the bug CSCtn05523 because the MWI notification fail In a recurring way. Restart the connection notifier service solve this issue but it come back again randomly.
I'm looking for a way to show if the SBR (split brain recovery) occurs.
Thank for your help.
Regards,
Philippe

Hi -
You may have already seen this Cisco web link, but I think it is useful for diagnosing SBR - http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/connection/8x/troubleshooting/guide/8xcuctsgx/8xcuctsg080.html
Regards, Ginger

Unity Connection 8.5 Random MWI light

I have one user out of 300 who's MWI light comes on randomly, no meesage when they check VM, it goes off when I reset it on the user page, I've deleted and recreated the mailbox, I've checked telephony configuration(no problems detected) nothing is working. Can anyone shed some new light on this issue? Thank you in advance.

I had this same thing happen to me. I still had a user configured in Unity while also configured in Unity Connection. I had to leave them like this for a while. To resolve, In Unity I went to the user then messages and deleted the MWI setting.
Del

E2100L Cisco Connect and Network Magic compatibility issues with Mac OS X 10.7 Lion

When you will release the latest version for Wireless router Linksys E2100L?, because I bought a MAC with Lion and I can´t use my Router.
Regards,
Daniel

Older versions of Cisco Connect for Mac computers have compatibility issues with the latest release of Mac OS X (10.7 “Lion”). Only Cisco Connect versions 1.4.11222 and newer are compatible with the Lion operating system.
Here is the link to ensure that Cisco Connect can be installed on your Mac: http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=a4e763be954243cfa0ab960c0fac7105_KB_23xxx_EN_v1.xm...
There is no such information about the release of Cisco Connect for E2100L for the Mac OS X (10.7 “Lion”) compatibility, so you need to wait for further release of the firmrware for E2100L.

Unity Connections remote call sign-in issue.

I have some users that when they dial there DID from outside they hit there VM press star and are prompted for their sign-in number and pin. Then I have some users that do the same thing, but the greeting just continues to play. I am sure there is a simple fix to this, but I cannot seem to find it. Hoping someone out here can lead me in the correct direction.
I am running Unity Connection 8.6.2.
Thanks in advance,
Dave

Hi Dave,
I would check the following on a "working" vs "non-working" user;
User> Edit> Caller Input> * (star)> send to Sign-in
Cheers!
Rob
Please support CSC helps Kiva
https://supportforums.cisco.com/blog/12122171/cisco-support-community-helps-kiva

Unity Connection 8.6 Mailbox Store Issue

Hi,
I am seeing an alert in Unity Connection Mailbox Stores that" This mailbox store is at or over 90% of its capacity ".
Also i have set the Aging Policies, but still no results. Anyways to reduce the size by deleting any other unwanted files.
Pls suggest.

Hello Jagadish,
In regards to this warning message you can also reference:
https://supportforums.cisco.com/thread/2241790
If your aging policy is "not working" it may be due to the fact it is not working retroactive, meaning that it is not purging old messages.
For best practices it would be best to create another Mailbox Store rather than increasing the size of the current one due to the fact that backups might fail due to the size.
Best regards,
David Rojas Peck.

Macbook will not connect to wifi, an environmental issue with wifi?

Macbook running OSX 10.85 will not connect to wifi, Apple support thinks it could be an environmental issue. Am connected to wifi right now in recovery mode. Has this happened to anyone else? What did you do to correct the issue? Also, 2 iPhones and an iPad connect without issues.

Back up all data before making any changes.
Step 1
Take all the applicable steps in this support article. If you're running OS X 10.8.4 or later, run Wireless Diagnostics and take the remedial steps suggested in the summary that appears, if any. The program also generates a large file of information about your system, which would be used by Apple Engineering in case of a support incident. Don't post the contents here.
Step 2
Run Software Update and install all available updates for OS X or your computer's firmware.
Step 3
If you're not using a wireless keyboard or trackpad, disable Bluetooth by selecting Turn Bluetooth Off from the menu with the Bluetooth icon. If you don't have that menu, open the Bluetooth preference pane in System Preferences and check the box marked Show Bluetooth in menu bar. Test. Continue if you find that Wi-Fi is faster with Bluetooth disabled.
From that same menu, select Open Bluetooth Preferences. If the box labeled Discoverable is checked, uncheck it. Click the Advanced button, and in the sheet that opens, uncheck the top three boxes, if any are checked. Click OK. Enable Bluetooth and test again.
If the application called "Bluetooth Setup Assistant" is running, quit it. Note: this is not applicable to OS X 10.9 or later.
Step 4
This step will erase all your settings in the Network preference pane. Make a note of them before you begin, and recreate them afterwards. It may be helpful to take screenshots of the preference pane.
Triple-click the line below on this page to select it:
/Library/Preferences/SystemConfiguration
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A folder should open with an item named "SystemConfiguration" selected. Move the selected item to the Trash. You may be prompted for your administrator password.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.
Step 5
Reset the System Management Controller.
Step 6
Make a "Genius" appointment at an Apple Store, or go to another authorized service center.
Back up all data on the internal drive(s) before you hand over your computer to anyone. There are ways to back up a computer that isn't fully functional — ask if you need guidance.
If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
*An SSD doesn't need to be zeroed.

10.5.8 connecting to 2008 R2 SBS issues with folders

Hey,
I hope someone might be able to help.
We have a company currently using Windows Small Business Server 2008 R2 that have about 20 mac's connecting to a shared drive using a single user login.
The problem we have is users copy files from there desktop but the permissions don't replicate on the files / folders on the server. Also when connected to a 2nd share point on the same server with the same user name and password they cannot copy / move their original folder. If you try to move these folders using Administrator on the server it states you don't have permissions and you can't enforce them either! When files do copy it copy's all the files and directory's but leaves folders in the original folder. (Which cannot be deleted, no permissions)
We have been looking at doing AD Binding to see if permissions could be resolved this way. any help would be great.

Upgrading to OS X 10.6 is straight forward. You'll need 1GB of memory and some disk space for the upgrade. You need to buy on OS X 10.6 DVD to perform the upgrade, it's not available by download. You can call the online Apple store in Australia at 133-622 and should be able to order it from them (same as in the US). After you install it, run Software Update several times, and you'll end up at OS X 10.6.8. Of course make a backup of the system before the update.
Beyond the minimum memory to run OS X 10.6, you probably already know that Adobe recommends 4GB to 16GB of memory for the CS6 products for best performance.

Issue with French characters and Variables combined.

Using Captivate 4 and publishing to SWF, I discovered the behaviour shown below.
You can see a text caption
The text of the first line in Captivate is 'Modifier les paramètres Word - $$v_ScoreParam$$/10'
When published the è is changed into a Chinese character.
Is this a known issue? Or am I doing something wrong?
Thanks for any clues.

Hello,
This is a known issue in Captivate 4 (there are several threads in this forum about it), and sorry, it has not been solved in CP4 but is no issue in CP5 (doesn't help you of course).
I had quite a lot of problems with this. The only workaround is putting this variable in a separate Text Caption and try to put it in place in the other Text Caption. Personally I avoided using those variables when expecting combination characters (like é, à ü...).
Lilybiri

Tiger & Safari 2.01 Issues with machine .local

Hi folks.
Tiger
Safari 2.01
I can't get it to see my localhost. My machine's name is kayak, and when i point Safari to kayak.local, I get strange things.
After a restart, it loads up fine.
New tab, command-shift-H, fine.
New tab, command-shift-H, Failed to open page, cause can't connect to kayak.local.
Huh? It's the same machine.
When I turn off personal web sharing, then turn it back on, it works again, then shuts off again.
Can someone tell me why this is such a pain in the browser? And how I can fix it?
Cheers

Hi, Liam, welcome to Apple's user-to-user discussion forums.
Go to View > Customize Address Bar and you will be able to drag the Back/Forward buttons back onto the toolbar.

Interactive report : issue with french special characters

Hi,
We have many interactive reports and we can't use any french special characters in the filter clauses. For example, Montréal becomes montrÃ©al.
What parameters do we have to change to make it work?
Thanks.

I found the answer in this thread : Interactive Report Character Set Issue

Unity Connection 8.5 MWI performance

I'm trying to get some sort of expectation regarding MWI performance with Unity Connection 8.5 and Unified Inbox with Exchange 2010 SP1.
Since my Unity 7x system is working fine in regards to MWI and Exchange 2010 SP1, my test Unity Connection 8.5 system is not. I've seen MWI status changes taking as long as 15 minutes but as little as 5 seconds to come to the Unity Connection 8.5 server. I know the issue is in Exchange, but does anyone have some observed performance from this type of integration?

In my case everything checked out and from all outward appearances should have worked fine. There was some finger pointing and TAC found several other cases resembling the same thing as I was experiencing. We upgraded to an engineering special only because it was the only thing newer to upgrade to from what was available online at the time. It resolved my problem not because it was an ES but I speculate that it just re-initialized some database components. I suspect sometime during making SMTP domain changes something got messed up and that caused the issue.

Unity Connection integration with Outlook problem.

Hello,
We deploy CUC 7.1 and we integrate it with MS exchange 2007 and outlook, and we perform the recommended configuration to make the voice mail message to be appeared in both Unity connection voice mail store and to be sent to exchange then appeared in outlook as inbox message, we perform that by choosing Accept and Rely option in Message actions tab.
The customer want when the message accessed from the outlook the MWI on turned to MWI off!!!!!
How can i perform that?
Thanks

Hi Ahmed,
What you are wanting is not available with CUC 7.x "Accept and Relay"
In Cisco Unity Connection 7.1, you can use the accept and relay action to instruct Connection to both deliver each message of a certain type to the user mailbox and forward a copy of the message to the relay address. (This is sometimes referred to as "accept and forward.") This option may be useful for users who regularly use a device that accesses a separate server for messages, such as a handheld wireless device, and want easy access to voice messages both on the alternative device and through the Connection user interfaces. If you choose this option, the user receives two copies of each message. The copies are stored in different message stores, and any actions the user takes on the relayed copy are not reflected on the copy stored in the Connection message store.
http://www.cisco.com/en/US/docs/voice_ip_comm/connection/7x/administration/guide/7xcucsag170.html#wp1091330
You will want to look into CUC 8.5;
New Features for Cisco Unity Connection Version 8.5
• Unified messaging with Microsoft Exchange 2010:
• Voice messages are synchronized with the Exchange inbox.
• MWI and message status are synchronized.
• Secure, private messages, mobile client, and calendar integration for Exchange 2010 are all supported.
• You can enable unified messaging for specific users or all users.
From this doc;
http://www.cisco.com/en/US/prod/collateral/voicesw/ps6789/ps5745/ps6509/data_sheet_c78-634096.html
Cheers!
Rob

Unity connection - how to verify if an email of the voicemail is being sent out

Hi Guys
I am running unity connection 8.5 and I am integrated with exchange 2010. Single inbox seems to be working fine for all users except one. The users info in unity connection looks fine and is pulling down from AD using the LDAP integration just fine. He seems to get voicemail in email about half the time.
I would like to verify if I could what is leaving the Unity connection server to show the issue is related to the users pc setting or the exchange server.
Any way I can use a tool to verify that when a voicemail is left Unity connection sends the message to the exchange server?
thanks
Bill

Hi Bill,
There's no easy way other than looking at traces, really. I'd check to see if the client machine is using Outlook in cached mode, or if they're doing any type of scheduled archiving, or sending voicemails via rules to a local .PST, etc.
Hope that helps,
Brad

Cisco Unity Connection 8.5 PIMG integration.

Hello Experts
My customer has PIMG integration with Cisco Unity Connection, users can access their mailboxes after creating a direct routing rule with the search scope where this users are located to send the call to "attemp sing in" conversation this part is working fine. Now subscribers do not get the user's mailbox when reaching FNA,Busy or RNA they are going to the "welcome to Cisco Unity Connection Messaging System from a... default greeting. Using Remote port status monitor I can not see the call coming in,but I am sure the call is getting to that server. I will like to know what traces I can enable to get the extension that is being sent by PIMG or what else I can check on the Unity connection server to resolve this issue?
Thanks in advance

Hi Rob
I configured the Direct Routing to send the calls to conversation "sing in" because the customer has multiple integrations and duplicated users with same extesion, he was getting "invalid username and password" everytime they try to log in, meaning that the user was in different CSS and the existing Direct Routing Rule did not have this CSS in the Search Scope.Maybe in you case you the users were not sorted out by CSS.
I am pritty sure they are using Nortel phones,but not sure what exact version.
Thank you for your response.I will try to configure a Forward Routing rule to send the calls to and specific user'extension base on the calling number to see what happens.

Unity Connection 8.5.1 MWI issue with French Locale

Similar Messages

Maybe you are looking for