Unity Connection 8.5 and Exchange 2007 UM

Hi everyone--has anyone configured Unity Connection 8.5 with Exchange 2007 for Unified Messaging yet? I'm having some odd issues...now every message gets a delayed delivery receipt (regular email messages). When i followed the guide from Cisco, it didn't work...reported a 503 error when i ran the test from a user's account...
Can anyone provide guidance? I've only done it under Exchange 2010 (with little to no issues...).
SJ

I did. Initially it was only Exchange 2010, however in SU2, Exchange 2007/2003 support was activated. It is currently working flawlessly. Just make sure to apply SU2 or upgrade to 8.6 (a little extreme, but to each, their own…). SU2 works well though.
SJ

Similar Messages

Single Inbox Issue with Unity Connection 8.5 and Exchange 2003

Hello Unity Gurus,
I recently upgraded our Unity server to Unity Conenction 8.5. We are pressing hard to have unified messaging. However theres always problems it seems.
We have several 2003 exchange servers, two of the exchange servers split up our organization and one has half of the users mailboxes and the other server has the remaining half. So far the only way that I can get Unified messaging is if I create two separate Unified Messaging Services one for one half, the other for the other half.
This becomes a problem since now when I create the Unified Message account I have to know what server the user is on and the problem being is that I have 700 voicemail users ill have to look up. Not only that but, if our employees move from one site to the next and if the mailbox gets moved then I imagine most likely break unified messaging for that account.
I've read the install guide for Unity connection Unified Messaging and I understand that the second option is to have Connection to search for Exchange servers via Active Directory however, when I set that up and test it via unified messaging services I get an error " searching network...failed to locate domain controller via DNS. Failed to locate an exchange 2003 server."
DNS seems to work if I create single Unified Messaging Service and use the host name that way.
Anyone have any thoughts or found a work around to this issue?
Thanks,
Dan

We have 41 exchange UM services configured in Unity Connection on 10 clusters, each one to the 2003 exchange servers. This is the only way it will work for us, as e2k3 can not search for and find other exchange services. For 2010, it is able to search by AD domain and site name, and we only have one connector configured on each server to the e2k10 environment. I believe this is the way it works, and is difficult to manage but works. Just my two cents.

Single Inbox on Unity Connection 8.5 and Exchange 2003 SP2

Hi,
We have Unity Connection 8.5 (with SU2) and Exchange 2003 SP2
We want to setup the Single Inbox feature that works well with Exchange 2007 and 2010, but my customer is running Exchange 2003 SP2.
We met all of the requirements outlined in: http://www.cisco.com/en/US/docs/voice_ip_comm/connection/8x/requirements/8xcucsysreqs.html#wp459928
I configure a new "Unified Messaging Services" profile for Exchange using Exchange 2003 and enabled for Single Inbox. When I run "Test" it displays the following errors (other validation is successfully)
The service port for IMAP is not functioning.
The system failed to connect to the server with a socket connection through port beatles.clubone.com:993. The error is error:0200206F:system library:connect:Connection refused. Refer to the tomcat log file for more details. If you are using secure connection, confirm that SSL is enabled on the server.
Why is it trying to connect using IMAP, that wasn't the case when I used for Exchange 2007 or 2010 when IMAP was not enabled.
Is there something else I'm missing for configuration with Unity Connection to support Single Inbox with Exchange 2003 SP2?
Thank you!
-rya

Hi Rya,
I just wanted to add my +5 vote for this great catch by Aaron (nice work "A")
If you are going to upgrade to Unity Connection 8.6
Check out this great doc from Saurabh for the refresh upgrade notes to 8.6.
https://supportforums.cisco.com/community/netpro/collaboration-voice-video/unified-comm-application/blog/2011/08/11/checklist-before-upgrading-to-unity-connection-86
Cheers!
Rob
"Show a little faith, there's magic in the night" - Springsteen

SBS 2008 and Exchange 2007 intermittent Email Issues

Hello
I am having an issue with my SBS 2008 Server and Exchange 2007. After setup, the mail seems to work great for about a week, then the mail just quits working. To get it working again, all I have to do is reboot the server and mail starts working
again. When looking in the event logs, all I come across is transport.exe errors. Any ideas on why it works for 5-10 days, then just quits working? Any help or insight would be much appreciated.
Thanks All

Larry
Here are some of the errors that i am getting:
(Event ID 1022) (Source MSExchangeIS Mailbox Store)
Logon Failure on database "First Storage Group\Mailbox Database" - Windows account NT AUTHORITY\NETWORK SERVICE; mailbox /o=First Organization/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Recipients/cn=Josh.Lange.
Error: -1069
Client Machine: SERVERNAME
Client Process: edgetransport.exe
Client ProcessId: 0
Client ApplicationId: Client=Transport
(Event ID 1022) (Source MSExchangeIS Mailbox Store)
Logon Failure on database "First Storage Group\Mailbox Database" - Windows account NT AUTHORITY\SYSTEM; mailbox /o=First Organization/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/cn=SERVERNAME/cn=Microsoft System
Attendant.
Error: -1069
Client Machine: SERVERNAME
Client Process: Microsoft.Exchange.ServiceHost.exe
Client ProcessId: 0
Client ApplicationId: Microsoft System Attendant Service Let
(Event ID 1022) (Source MSExchangeIS Mailbox Store)
Logon Failure on database "First Storage Group\Mailbox Database" - Windows account WIS\JLange; mailbox /o=First Organization/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Recipients/cn=Josh.Lange.
Error: -1069
Client Machine: SERVERNAME
Client Process: w3wp.exe
Client ProcessId: 0
Client ApplicationId: Client=ActiveSync;UserAgent=Apple-iPhone5C1/1002.329;Action=User=jlange&DeviceId=ApplF18KM7FHFH1C&DeviceType=iPhone&Cmd=Sync
These are a few errors that i get when the mail isn't working. When it stops of the server, the outlook clients show the exchange server disconnected, and active sync will not work either. I can still remote to the server, so i dont think its
an internet connectivity issue. Let me know if you have any other questions. Again, the mail seems to work for about 5-7 days, then i have to reboot the server to get the mail flowing again. Any help or direction would be appreciated.
Thanks for Looking

10.5.7 breaks RDC and Exchange 2007 connectivity?

I just installed 10.5.7 and now I find I cannot receive mail from our Exchange 2007 server (Entourage 2008) or connect to our file server (SBS 2008 standard).
I only found one mention of this anywhere else (http://www.macfixit.com/article.php?story=20090515093340707) but it is only stating that the problem exists, not offering a solution.
Anyone else experiencing this? I can use OWA for mail if I have to, but I admin our office and RDC is invaluable to me. I will probably have to wipe/re-install our macs if a fix is not available for this.

I had a lot of problems with this and researched it as best I could. My only solution was to format clean, upgrade to 10.5.7, manually input realms, dns servers and domain controllers in System>Core Services>Kerberos, then perform the bind in the Directory Utility. After that all domain connections work, and admin level accounts can log in directly to the Mac. Our group policy for the standard user seems to prohibit the standard user from using a Kerberos login, and I have not figured out what setting is preventing it yet. When I say all connections work I mean Entourage is able to pull email from Exchange 2007 via kerberos login or OWA and RDC reaches all Windows servers I maintain. If you check macenterprise.org you will see many people having probles with AD binding in 10.5.7 and most of them have simply reverted to a previous version. After fighting with this machine for a good long time I think I'm going to revert to 10.5.6 because of poor video performance or just wait til the real headache, 10.6 in September
Message was edited by: Witchbutter

Cannot connect to OWA after Exchange 2007 SP3 and Rollup 13 install.

Hi,
Our OWA website isn't accessible after we installed SP3 and rollup update 13 for Exchange 2007. When we attempt to visit the OWA URL, all we receive is HTTP 403.4 SSL is required to view this resource. Doug

Hi,
I recommend you follow the steps below for troubleshooting:
1. Open IIS Manager, click Default Web Site -> Authentication, make sure that Anonymous Authentication and Windows Authentication are enabled.
2. Click Default Web Site -> SSL Settings, check "Require SSL" and click Ignore.
3. Click Default Web Site -> HTTP Redirect, check Redirect (enter your
https://URL), check "Only redirect" box and Status code Found 302.
4. Expand Server Configuration -> Client Access ->double click owa ->Authentication tab. Check the Basic Authentication and check the Use forms-based authentication button Logon Format: Domain\user name.
What's more, here is a thread for your reference.
Exchange 2007 SP3 Rollup 2 installed - OWA stopped working
http://social.technet.microsoft.com/Forums/en-US/8481eb3d-a6ab-42fc-b7ea-fa9a9a625e48/exchange-2007-sp3-rollup-2-installed-owa-stopped-working?forum=exchangesvrdeploylegacy
Hope it helps.
Best regards,
Amy
Amy Wang
TechNet Community Support

FPE 2010 connection filtering AND Exchange 2007's "IP Block List Providers"

I'm getting a ton of SPAM the last several weeks.
FPE 2010 connection filtering seems to be working, but I wonder if I can enable Exchange 2007's "IP Block List Providers" as well
David

Hi,
Please refer to the following links.
Using connection filtering
http://technet.microsoft.com/en-us/library/dd639381.aspx
Question about using IP Block List Providers in EMC after installing FPE
https://social.technet.microsoft.com/Forums/en-US/28b856e0-7d87-4b92-944e-ac13e1574d46/question-about-using-ip-block-list-providers-in-emc-after-installing-fpe?forum=FSENext
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Mail.app and Exchange 2007 with Rollup 3 ... anyone get it to work?

Spent way too much time on this...
After finding our our Exchange 2007 server didn't have the legacy components installed to ensure WebDav would work, we can now connect to our Exchange 2007 mail server from Microsoft Entourage for all Windows Active Directory accounts.
For Apple Mail however, this is not the case. Opening mail, the account information does default in accurately (email, userID, exchange 2007 server) when I enter a users password, it says that it is unable to connect to mail server user/password failed.
If I manually create the account, the same thing occurs, a pop-up appears prompting for a password, which I enter and it comes back saying it isn't valid.
The password is valid because on the same Mac I open up Entourage and log in.
Keychain is NOT used and none of the passwords are held because of the headaches this causes.
Looking for ideas, thinking this is more of an Apple Mail.app bug not working with Exchange than a Microsoft issue.

Just want to add to this...it was resolved the Advanced tab is very important on mail.app.
The Advance tab authentication must match what the Exchange server/Active Directory is using.
For us NTLM is what we need to use.
Also we found that one exchange server had a bad installation while another had no problem connecting via mail.app.
Thus the installation is going to be looked at.

I have a problem connecting to my company exchange 2007 server from my IPAD2 the same settings worked with the IPAD1

Hi All
Can anybody help with this problem when trying to authenticate on the Microsoft Exchange Sever.
I have been trying to connect the mail client on the IPAD2 to my company email (Exchange 2007 server)
There appears to be an issue with the SSL settings for the IPAD 2 and Apples new OS
I know that it’s not supported but I also know that the previous version of the IPAD worked fine using the same settings.
Just to confirm I can access the email via Safari therefore I know that the Public Key is loaded in the web browser.
Can anyone confirm that the Public Key has been installed on the IPAD 2 email client?
Is there anyway to edit the SSL settings?
Thanks in advance fro your help
Regards
Pat

Try using Static IP and force a connection.
You can get the settings from your other devices that are connected to the router.

Crossover, Outlook and Exchange 2007

Hi
So our company has just upgraded our server to Exchange 2007(it was 2003) and I'm having real problems getting my Arch setup to play nice.
I was using Evolution to connect to it and this did everything that I wanted it too.
The evolution-exchange plugin, however, only seems to work with Exchange 2003. I tried the evolution openchange option, but this doesn't allow me to access public folders(essential), send completely grabled emails, and crashes all the time.
So I have now decided that running Outlook in wine is the best option. After trying for a while I discovered that outlook doesn't run at all in normal Wine, so I'm trying out Crossover(v9).
Everything installs fine, but when i go to add the exchange server account, it pops up a dialog asking for my username and password. Once i enter them and hit return, the dialog just reappears over and over and never actually lets me in.
I have tried doing the exact same process in crossover in a Ubuntu VM, and it all works fine, but if i package it up and bring it back to arch, the same problem pops up, and there's still no way to get out.
This really is a killer problem for me as the only way I can access my mail and public folders is through a VM on my machine, but the poor Atom N280 is struggling running that with anything else.
Anyone have any idea how I can fix this, or have some sort of alternative way to get the same thing?

Didn't test it, but
http://sourceforge.net/tracker/index.php?func=detail&aid=2901798&group_id=184600&atid=909907 wrote:public calendars are supported, use /public instead of /users in calendar
URL.
However, public folders in general could be a problem:
http://sourceforge.net/tracker/index.php?func=detail&aid=2968429&group_id=184600&atid=909905 wrote:
Public folder support is partially implemented but still highly
experimental.
In thunderbird, you can try to set /public in IMAP account advanced server
options as public folder path, this may or may not work.

Snow Leopard and Exchange 2007 Configuration Issues

I know this topic may have been covered in here previously but I have yet to find a solution.
Here is the background. Our CEO has a Mac Book and two weekends ago he updated to Snow Leopard and now wants to use the Mail client on his Mac rather than OWA to get his email. We have Exchange 2007 (I am the Admin) and have all the latest patches and Roll Ups installed. We run OWA without issue and have 10 iPhones working perfectly (i realized they use different technology to sync). I enabled EWS by following this link http://technet.microsoft.com/en-us/library/bb201695.aspx and this is the actual command i used:
Set-WebServicesVirtualDirectory -identity exchaname\EWS* -externalurl https://webmail.domain.com/EWS/Exchange.asmx -BasicAuthentication:$True
Seems to have run properly and there are no errors reported.
Now when I go to connect using the Mac it does not Auto Discover and I must enter manually. I enter what i think it needed and its not working. On the Account Information Tab I have the following:
Description: generic name
Email Address: [email protected]
Full Name: The Person's Name
Internal Server: webmail.domain.com *Not sure what should be here
External Server: Webmail.domain.com *Again not sure if this is correct
Username: AD user name Also tried domain\username
Password: AD password
Ougoing Mail Server: not sure what should be here
Next is the Mailbox behavior Tab:
Did not change anything
Advanced Tab:
Internal Server Path: EWS/Exchange.asmx
Port:80 SSL unchecked
External Server: EWS/Exchange.asmx
Port: 80 SSL unchecked
I get no connections and I am sure somehting is not correct in the above but I am lost and new to Exchange as it is. Also new to Mac's
Help Please

We are already using webmail.domain.com for our OWA URL, well actually it is webmail.domain.com\OWA. Would I need one for the EWS & Autodiscover to use webmail.domian.com\ews?
We have rules in the firewall for Exchange and OWA. Would we need another for this?

Outlook 2013 and Exchange 2007 not always syncing read status of a message

Out users are experiencing this issue from time to time. Outlook 2013 is using Exchange mailbox as default storage (Exchange 2007 SP3). Sometimes it shows that Inbox has one or few unread messages (Inbox name is bolded and there is a number near it). But
a user can't find any unread messages in the inbox. If he logs to his mailbox via OWA, then he can find those unread messages. But they are marked as read in the Outlook. So it seems Outlook 2013 has issues syncing with Exchange 2007 as we have never experienced
such issues when using Outlook 2007 with the same server.
Any hints on how to make this thing go away, other than instructing users to log via OWA and mark unread messages as read?

Hi,
Switch to Exchange Online Mode, does the issue persist?
It seems to be a sync issue between Outlook and Exchange, make sure the Internet connection is good. Let me know if the issue persist after clicking
Send/Receive All Folders button.
Try to run Scanpst.exe to repair the local data file in case the data file has been corrupted:
http://support.microsoft.com/kb/272227
Regards,
Melon Chen
TechNet Community Support

Cfexchangeconnection on Coldfusion 9 and Exchange 2007

I am experiencing issues with Microsoft Exchange with Coldfusion 9. We recently upgraded from Exchange 2003 to Exchange 2007 and cannot now successfully connect to Exchange using the cfexchangeconnection tag.
I get the error: 'Access to the Exchange server denied.Ensure that the user name and password are correct.'
I understand there have been some issues with Exchange 2007 and Coldfusion 8 and I have followed all the instructions on Adobe's documentation. However, the username and password are correct.
1. Exchange server is running on Microsoft Server 2008 (WebDAV component has been enabled)
2. Security certificate has been downloaded to the correct location on the coldfusion server
3. Webmail has been activated on Exchange server and username/password credentials work when logging in via the webmail interface.
4. Formbasedauthentication is set to 'true'.
5. I have tried setting protocol to both http & https
6. I have tried using '[email protected]' for the username as well as just 'myusername'
7. Coldfusion can send out emails via CFMAIL using the same credentials as I entered in the cfexchangeconnection tag.
I would very much appreciate any help anyone could offer.

Hello Richard,
Do you have any URL redirecting on your environment? This can cause the error mentioned.
If you try to login via OWA to a users mailbox with the impersonation account does it succeed? If it doesn't it is likely the issue is with the permissions applied to the CUC account.
This test was for the UM service account if you run the test for the user does it display a different message? This could help to isolate.
Also make extra sure you applied the permissions to all applicable Exchanges, commonly clients only apply to one of them:
Step 4 If you set permissions on individual Exchange server in Step 2 and you have more than one Exchange 2007 server, repeat Step 1 through Step 3 on the following servers:
•All other Exchange 2007 client access servers that Connection can access.
•All Exchange 2007 mailbox servers that home mailboxes that you want Connection to be able to access.
http://www.cisco.com/en/US/docs/voice_ip_comm/connection/8x/unified_messaging/guide/85xcucumg020.html#wp1170148
-Regards
.D.R.P.

Cisco Unity Connection single inbox and viewmail error

Unity Connection 8.5.1 single inbox with Exchange 2010 and viewmail 8.5.4. We arein the process of migrating from Unity 7.0.2 to Unity Connection.
We are a lawfirm and many of our admins have full access to their attorney's exchange mailbox to manage their messages and voicemails. With Connection those admins can no longer access voicemails in exchange accounts other than their own even if they have full access.
A message pops up stating "the requested voice message is no longer available" and only dead air is played whether playback via phone or speakers is selected. This is a huge issue for our end users.
Has anyone else experienced this or hav eany suggestions for a work around?
I have tried assigning the mailbox access delegation role to an end user but this did not grant access via vewmail.
Thanks
Liz

Hi Liz,
This is expected behavior because VMO has certain dependencies mapped between users and messages, so when a different user tries to access the message, it can't find the mapping which is why you receive that message. However, VMO 8.6(4) introduced the ability for this exact group mailbox access feature you're after.
http://www.cisco.com/en/US/docs/voice_ip_comm/connection/vmo/release/notes/864cucvmorn.html#wp346504
Hope that helps,
Brad

Cisco Unity Connection Single inbox with Exchange 2010

I have a new installation of Unity Connection 8.6.2 using single inbox with an Exchange 2010 cluster frontended by a Netscaler load balancer.Functionality that does not work is when a new message comes into outlook and the message is read or deleted it does not update the status on the phone- IE turn off the MWI or if the message is deleted it is still a new message in Unity. If you click reset in the user unified message account, the status gets updated.
TAC says its a blocked port on Exchange TCP 7080 but that is open.

I followed this document :
http://www.cisco.com/en/US/docs/voice_ip_comm/connection/8x/unified_messaging/guide/85xcucumg020.html
but when i try to integrate CUC with exchange 2010 , i didn't find is clear enough
do you have Step by Step more clear than that link becouse my lab very close to your case.
Regards

Unity Connection 8.5 and Exchange 2007 UM

Similar Messages

Maybe you are looking for