Unity Connection 8.5 Single Inbox Maximum File Size

Hi,
I have a customer who is using Live Record with Single Inbox & quite commonly the calls they are recording are going for upto an hour. This is obviously resulting in large voicemail sizes.
They are finding that long recordings (ie 20 minutes) are not being sent to their Outlook account. Is this limited in the settings somewhere or is there a maximum that anyone knows of? The Exchange Admin assures me that they should be able to receive upto 50MB emails which is more than enough.
Cheers
Russell

Stanley,
Exchange was the issue. Fix was found by Seppe in TAC - worked with him on a couple of occasions and he is one of the best. His email is below:
Changed the following settings in exchange server to receive 50 MB attachment:
1.        Edit
C:\Program Files\Microsoft\Exchange Server\V14\ClientAccess\Owa\web.config and update the maxRequestLength value to 51200
2.        Open a command prompt and execute the following commands:
cd %windir%\system32\inetsrv
appcmd set config "Default Web Site/ews" -section:requestFiltering -requestLimits.maxAllowedContentLength:51200000
appcmd set config "Default Web Site/owa" -section:requestFiltering -requestLimits.maxAllowedContentLength:51200000
3.        Edit
C:\Program Files\Microsoft\Exchange Server\V14\ClientAccess\exchweb\ews\web.config and  change the  maxReceivedMessageSize value to 51200000 underneath the
4.        Restart IIS service to apply the change
Recommending to do this off-hours and take a backup of configuration files before doing any change.

Similar Messages

  • Cisco Unity Connection 8.5 Single Inbox - Unified Messaging?

    For the Cisco Unity Connection 8.5, to enable Single inbox unified messaging do we need to get additional licensing for this feature?

    Hi Ali,
    LicIMAPSubscribersMax
    Users with IMAP access to voice messages or with single inbox (single inbox available in Connection 8.5 and later only)
    Sets the maximum number of users who can use:
    •A third-party IMAP client to access voice messages.
    •The  unified messaging feature "Synchronize Connection and Exchange  Mailboxes (Single Inbox)" on the Unified Messaging > Unified  Messaging Services page and on the Users > Users > Unified  Messaging Accounts page.
    For single inbox, the total number of users in classes of service for  which single inbox is enabled must not exceed the licensed maximum. This  applies regardless of the number of users in those classes of service  who are configured to use single inbox. In addition, all users who are  configured for single inbox must be in a class of service for which  single inbox is enabled.
    http://www.cisco.com/en/US/docs/voice_ip_comm/connection/8x/administration/guide/8xcucsag310.html
    Cheers!
    Rob
    "And if I should fall behind
    Wait for me" - Springsteen

  • Unity Connection 8.5 single inbox with Exchange 2003 - Access denied

    Hi,
    I'm using CUCMBE 8.5.1.12900-7 Unrestricted. i'm following Unified Messaging Guide for Cisco Unity Connection Release 8.5 and Later for configuring single inbox. I have successfully setup and tested unified messaging service when I subscribe this service to a particular user and test it, I get following error:
    Issue: Failed accessing [email protected] on 192.168.0.10
    Recommendations: Some possible reasons for 401: Incorrect service account name or password. Service account password expired. Proper permissions not granted to service account. Exchange mailbox uninitialized.
    Details: HTTP status=[401 Unauthorized] diagnostic=[Bad response from server, HTTP code returned: 401] url=[http://192.168.0.10/exchange/
    [email protected]] request=[<?xml version="1.0"?> <D:propfind xmlns:D="DAV:" xmlns:fh="urn:schemas:httpmail:" xmlns:h="http://schemas.microsoft.com/repl/"> <D:prop> <fh:msgfolderroot/> </D:prop> </D:propfind> ] response=[<html><head><title>Error</title></head><body>Error: Access is Denied.</body></html>]
    I have verified above mentioned recommendations but no such issue exists. Any ideas?

    Hi Muhammad,
    I am having exactly the same issue in configuring sinlgle inbox with unity connection 8.6 and exchange 2003. I have checked everything but no result. Could you please help in configuring?
    Thanks
    The validation results for the  user unified messaging service account [email protected] with service  E2K302 are the following:
    Service "E2K302":  AuthenticationMode=NTLM [use HTTP] Server=[E2K3-02.chelloit1.local]  Type=[Exchange 2003] Username=[chelloit1.local\agokharu]
    Failed accessing  [email protected] on E2K3-02.chelloit1.local
    Some possible reasons for 401:  Incorrect service account name or password. Service account password expired.  Proper permissions not granted to service account. Exchange mailbox  uninitialized.
    HTTP status=[401 Unauthorized]  diagnostic=[Bad response from server, HTTP code returned: 401]  url=[http://E2K3-02.chelloit1.local/exchange/[email protected]]  request=[<?xml version="1.0"?> http://schemas.microsoft.com/repl/">   ]  response=[ErrorError:  Access is Denied.]

  • Unity Connection Office 365 Single Inbox - 100 Users Limitation

    Hi all,
    Goiing over the Unity Connection release notes:
    Cisco Unity Connection 8.6(2) Support for Microsoft Office 365
    Revised 13 April, 2012
    In Cisco Unity Connection 8.6(2) and later, you can configure Connection to synchronize voice messages in Connection user's mailbox with the user's Exchange Online mailbox configured on Microsoft Office 365 environment. Microsoft Office 365 is a cloud hosted collaboration solution provided by Microsoft.
    Cisco Unity Connection 8.6(2) SU1 is qualified for 100 users with Microsoft Office 365. For scalability beyond 100 users, you need to contact UCBU Product Management team through [email protected] mailer.
    Note The integration beyond 100 users will not be supported by TAC until the BU has signed off on it.
    I was aware of the 19 users per Unified Messaging account issue, in which we created several UM Service accounts as a temporary fix until Microsoft lifts the limitation.  I wasn't aware of the above that there is a limitation to 100 Users total.
    There has been a few posts regarding the 19 user/account issue in which the workaround has been to create up to 20 UM accounts to get up to 380 users as a temporary solution.
    Any insight as to when this will be lifted or detailed timelines would be great!
    Thanks,
    Chris

    Hey Chris,
    I wouldn't go that route as you nicely noted. The specific locales for su2 are not shown
    and I'm pretty confident that this bug would carry over to su2 as well
    But then again....I could be way off base here
    CSCty54979 - 8.6.x release notes should detail what builds are required for locales
    Symptom:
    Release notes for Unity Connection 8.6(2a) and  8.6(2a)SU1 are not clear about what builds the use of locales  (localizations) are supported with and where they can be acquired
    Conditions:
    Customers wishing to support non-US English (ENU) languages with Unity Connect 8.6.x
    Workaround:
    For  Unity Connection 8.6(2a), you must install ES12 and use the locale  files that are labeled as ES12. The locale files are posted on cisco.com  for download, but Unity Connection ES12 is not (you will need to open a  TAC case and request a copy of 8.6(2)ES12)
    For Unity Connection  8.6(2a)SU1, the 8.6(2)ES12 locales should NOT be used. An updated set of  locales will be posted for use with this build in the near future  (expected by roughly mid to late April 2012). Also note that if you are  currently using the 8.6(2)ES12 locales, you should NOT upgrade to SU1  until the SU1 locales are posted to cisco.com so that you can use them.
    If su2 is equivalent to ES44 then they aren't shown on this doc either??
    http://www.cisco.com/web/software/Voice/pdf/LocalizationSupportforCUCESreleases.pdf
    Cheers!
    Rob
    "May your heart always be joyful
    May your song always be sung" - Bob Dylan

  • Unity Connection 8.5 Single Inbox with Verisign Certificates

    Hi,
    I am trying to connect CUC 8.5.1.12900-7 to Exchange 2010 using Basic authentication with SSL.
    I am having problems when I get to the test user stage and think the problem may be caused by certificates.
    To obtain the certificates that I have installed on CUC I got one of the users to connect to OWA and then exported the certificates associated with the connection and then loaded then onto CUC - is this the right way to do it? - there does not seem to be any documentation that covers this in detail.
    Can anyone point me in the right direction or at least let me know how to troubleshoot the problem?
    Thanks

    You want to export the root CA certificate from OWA and import it to both the tomcat-trust and connection-trust stores. When I did this last week on 8.6(1)a I did not have to restart Tomcat although that has been required in the past. You can spot the root CA certificate by choosing the Certificate Path tab, selecting the highest certificate in the chain, opening it, select the Details tab, and click Copy to File. When you save it you will want the Base-64 encoded file and need to manually change the file extension from .CRT to .PEM.
    Additionally, you can rule SSL out by unchecking the Validate Certificates for Exchange Servers checkbox. This will allow the SSL session even if the certificate fails validation.
    Other issues I have seen:
    The permissions granted to the Exchange user did not delegate to that user/mailstore or you accidentally missed a step.
    The AutoDiscover folder in IIS is not allowing Basic authentication. The Exchange architect I worked with last week wouldn't enable this so I ended up using NTLM authentication instead since both EWS and AutoDiscover were allowing Integrated WIndows Auth.

  • Maximum File Size on Import?

    Hello all, been a ghost reader here but this is my first question (love the forums, btw, super helpful).
    I've been editing a feature film on Premiere Pro. We are nearing the end and I received a DPX sequence back from coloring. Upon importing into Premiere (Intermediate Media Timebase set to the appropriate framerate), the importer hangs up. If I click on anything, the program crashes.
    Here are my questions:
    Is a 2TB DPX sequence a "normal" size for any project? This seems insanely large to me, but this is also my first feature so I could just be ignorant.
    If 2TB is normal, is there a maximum file size Premiere can import?If not, should my system be able to handle a 2TB file?
    The 2TB file is on an external drive, connected via USB3. Potential to connect via eSATA.
    System Specs:
    3770k CPU
    SSD for OS (256GB)
    External Raid 10 - 6TB
    32gb RAM
    GTX 580 GPU
    All help is greatly appreciated!

    Thanks for the reply, Jim.
    Just to clarify, a file this size (or sequence of files) is common? But generally the only way to handle them is with a RAID 3 setup?
    My next question would be, isn't there a lossless format the color people could give me that isn't 2TB? The file I gave them was just over 800GB so it seems really unnecessary for it to be this large.

  • Maximum File size on DMP

    Hello,
    Is there a maximum file size that DMP 4400G can support. We are trying to upload a 7GB MPEG file to the DMP with an attached 16Gb USB flash drive. However, it fails when it reaches 56% with an FTP error: ( "Unable to write data to the transport connection: An existing connection was
    forcibly closed by the remote host.")
    Is there a maximum file size that the DMP FTP daemon supports?
    Thanks

    I am not aware of any File size limitations in the DMP.
    I tested with DMP-4400G running 5.2.
    I created a 7GB file and used FTP (Filezilla) to upload file to
    USB2 on the DMP.
    The file transfered without issue. 
    I would suggest trying a different file and test
    transfer again.
    For Example:
    (linux, OS X, unix)
    command = dd
    dd - create a large file for testing
    Description
    To create a 7 GB file:
    # dd if=/dev/zero of=file_7GB bs=7m count=1k
    Example
    dd if=/dev/zero of=file_7GB bs=7m count=1k
    * What FTP client are you using?
    * What format type is file?
    * What version of code on the DMP?
    * What file format is used on the external USB drive?
    * What manufacturer & model# of the flash being used?
    Thanks
    T.

  • Volume exceeds maximum file size

    Hi,
    I am trying to compress a FC7 file using Compressor. I want to compress as a ProRes and as .264 file. I have an error each time: it says: "volume exceeds maximum file size". I don't understand where it come from. I have got space on my disk. I don't have any other applications opened.
    I have a MacBook Pro with dual core 2,6GH RAM.
    Thanks for your help

    I have the same problem, except I'm exporting a single recording about 2 hrs 40 mins anywhere between 192-320 is fine (All I've done is trim another mp3 file down - imported originally at 3hrs 30 mins 470mb 320 kbps), it shouldn't exceed 2GB it should be way under that. Even if i try to export at 64kbps it doesnt let me.
    I used to do this all the time in Garageband, I don't understand the problem. I've looked at my prefernces and menu options and I can't see a way to tackle it.
    Can someone please advise?
    Cheers

  • What is an idea of maximum file size for a film in Captivate?

    Hi there,
    I'm creating an elearning course in Captivate 7, and it is being published as HTML5. This means the films I've imported are being converted to MP4s, and they are around 10-20mb in size once they've converted. They seem very slow to load on some computers - do you think the file size is too big? Or could it be another issue? Does anyone have a recommendation for maximum file size for films? They are 572 x 322px and around 1-2 mins in length.
    Thanks in advance

    Probably better guidelines that dictates 'size' of a vi are:
    typically no more than 1 video screen in size
    is it legible
    and is it's function and operation clear.
    I have seen examples of '1 vi does it all' that were many screens wide and tall, totally a flustercuck, and nearly 1 MB in size.
    Globals and local variables (except for LV2 style) are typcially shunned for they can create a host of problems (race conditions, indeterminant data).
    Use connector pane to wire controls and indicators to. Then use wires between vi's to transfer data. I tend to use clusters to hold shared data.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~
    "It’s the questions that drive us.”
    ~~~~~~~~~~~~~~~~~~~~~~~~~~

  • Maximum file-size for HR EIC emails

    Hi folks
    We currently use EIC in ERP, and have an issue with sending large emails/attachments as the maximum file-size appears to be only 2MB. This is set in the IMG activity Employee Interaction Center (EIC) -> Interaction Center Web-Client -> Communication Channels ->E-Mail -> Define E-Mail Profiles, the attachment maximum size is set to a maximum of 2,147,483 bytes.
    I have tried searching for anyone else having a similar problem, but haven't found anything. I would imagine many customers would have EIC users in a Shared Services environment sending attachments over 2 meg; so before we log a call with SAP, has anyone else had this issue and how did you resolve it?
    Thanks very much.
    James

    The maximum value is 2,147,483 bytes, which is what the config is set to. This seems pretty low, especially in this day and age.

  • Maximum file size exceeded?

    Recently I've bought curve 9300 - so far it looks to be the best phoned I had so far.
    But yesterday I finally decided to install desktop software and check some other functions of the phone. And that's when I found a problem. I haven't installed ny media card, but there's some free space showing on the built memory. I've wanted to upload a couple of multimedia files ( .mp3 - using "file" button, I'm not using Itunes, Windows media etc) . I got an info that maximum allowed file size has been exceeded (I'm not sure it's excat phrase as I had to translate it from Polish). What's wrong? I'm pretty darn sure that file I wanted to upload is smaller than free space (mp3 of around 5MB).

    Hi and Welcome to the Community!
    Here is a KB that discusses that error:
    KB26221 "File exceeds the maximum file size of the destination or is too large for the system" appears when saving attachment files on the BlackBerry smartphone
    Hopefully it contains something useful! While it is written for the 9700, I suspect it applies to your BB as well.
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Maximum file size for export into MP4?

    Hello,
    I am not able to export 2 hour HD video into standard MP4 file. It seems that reaching 100% export algorithm gets into loop. I was waiting for hours and still had seen progress at exactly 100% with final file size on hard disk to be 0 bytes. I am using CS5 on MAC OS X. I had to split my timeline to 2 parts and to export them separately (which is embarrasing). Is there something like maximum file size for export? I guess that 2h video would have about 25-35GB.
    Thank you
    jiri

    You are right.
    So I am running AP Pro 5.0.4, Adobe Media Encoder 5.0.1.0 (64bit). Operating system Mac OS X ver 10.7.3. All applications are up to date.
    MacBook Pro Intel i5 2.53GB, 8GB RAM, nVidia GT 330M 256 MB, 500GB HDD
    Video is 1920x1080 (AVCHD) 25fps in a .MTS container  (major part of timeline), 1280x720 30fps in .MOV container (2mins), Still images 4000x3000 in .JPG
    No error message is generated during export - everything finishes without any problem...just file created has 0 byte size (as described above).
    This is my largest video project (1h 54min) I dont have any other problem with other projects.
    I dont run any other special software, at the moment of export all usual applications are closed so that MacBook "power" can go to Media Encoder. No codecs installed, using VLC Player or Quick Time.
    Attached please find printscreen from Export settings (AP Pro). Writing this ppost I tried to export only the first 4mins from timeline where all kind of media is used...and it was OK.
    As a next step I will try to export (same settings) 1h 30mins as I still believe problem comes with length of video exported.
    Let me know your opinion

  • Maximum file size that can be ulpoaded at one time

    Hi All,
    I have an issue in which user is uploading 200 MB file in to KM. But she is getting "IisProxy.dll: 502 Bad Gateway" error.
    I have tried uploading a document and was successfull in uploading 93 MB document and while uploading above this (93MB) i was getting Page cannot be found error.
    I have found in refrences of same as in SAP note 820028 and on
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/25/b0a4f6f2b03a43a727a165a4d6a555/frameset.htm
    Please advice  me what shoud be the maximum file size that can be uploaded at one time.
    Thanks in advance.
    Honey

    Hi,
    By default the maximum file size is 128 MB. You can configure that in visual administrator.
    http://help.sap.com/saphelp_nw04/helpdata/en/05/35e13d8ee48f5ee10000000a114084/frameset.htm
    If you as administrator need to upload a file with larger size, you can use km file repository like etc. and can upload file from OS.
    Regards
    Baby

  • Maximum file size of 2 GB exceeded please choose a shorter bounce time

    I have done a thorough search online (w/google) trying several combinations of words but I seem to be the only person on the planet with this error. I guess I will try to remake the project but I don't think it will fix the problem. I also will update my OS to 10.4.10, anyways here is the the error message.
    "Maximum file size of 2 GB exceeded please choose a shorter bounce time"
    I just bought and installed iLife 08 and the 8.1 update for Garageband. I have a 3 hr and 50 track on the time line and I have added chapter marks with 16k pics. The original combined track size (wav files) did exceed 2GB but I edited the files in itunes (to mono wav files) and swapped in the new files so that the max file size should only be 1.5GB. I still get the error message above when I try to export the podcast to disk using AAC w/Mono Podcast setting. Your help is appreciated.
    Message was edited by: Thad

    I am now the third person in the world to get this error message, except my GB project is a mere 1 hour and 45 minutes long. I've outputted longer projects before and never got this error before. It's a new one to me, and frustrating. How exactly am I supposed to choose a "shorter bounce time" if there is no explanation anywhere in Appleworld of what a bounce time is or how to set it shorter?
    Again, I'm not doing anything different with this project than others that shared successfully, and the dialog box estimates my outputted file size to be approx. 100 MB.
    Can anybody help me get through this error blockage? Please?

  • Maximum file size of 2,0 Gb exceeded

    Searched all over the place and found one thread with no solutions, so I´ll try again..
    I have a project with two mono recordings, each aiff and 530 mb big. Thats 2 hours and 24 minutes. When I try to bounce this in logic 8 (to mp3), I get the message "maximum file size of 2,0 Gb exceeded - please choose a shorter bounce time". ??? If anyone knows how to get around this, pleeaase let me know.
    I imported the aiff files to garageband, and garageband had no trouble bouncing it to mp3, so if garageband is able to bounce it, surely logic should be!? The reason I need to bounce it from logic is because of the editing features there, so doesn´t really help that garageband is able to bounce it....also tried importing the mp3 to logic and then bounce, but same problem occured. I´ve also tried turning down the quality to lowest, but doesn´t help. Please help!

    Just some thoughts on this...
    If the OP is saving to a Mac formatted drive it's not a problem with creating a file on the drive. Might try saving to different location.
    It's possible this may is an internal error from Logic and. It probably has little to do with the actual file size as much as it does with the overall length of time of the bounce.
    In other words... if Logic sees a certain length of time for a bounce, no matter the file type, it thinks the bounced file will exceed the 2GB file limit, which is leftover programming from earlier version of Mac & PC Logic when both operating systems imposed a 2GB file size restriction.
    pancenter-

Maybe you are looking for