Unity Connection 8.6 not able to forward from extension (dial out)

Dear all,
I'm having a problem at a customer where i'm not able to forward calls externally from the Unity (that's a wish too).
Basically here is the request for which I'm having an issue:
- I'm making a menu with a number XXX (CTI Port) with a System Call Handler
- Under that menu i've 3 choices which points to 3 internal numbers (YY1, YY2, YY3) (CTI Ports).
- All the CTI Ports are forwarded to international numbers which are the final destination
So the flow is the following:
NOT Working
- XXX --> Choice 1 --> YY1 --> Forwaded all to 000countrycode
Working
- XXX --> Choice 1 --> YY1 --> Forwarded all to 444 (internal number)
The strange thing is that I tested everything when I was on site by calling internally XXX from an internal number and it was able to forward all my call to the international number ...
If anyone have a clue about what I can do, I'll appreciate a lot ...
Thanks in advance
C.

Hi Taranjit,
The rules are not made to enable unity to dial out, my goal was to permit only internal calls, but in this specific case, the internal number, is a CTI Port forwarded all to the external international number...
I tried the Unity connection system handler from a internal phone and it was working perfectly, but not if the call is coming from outside apparently.
Kind regards
Christophe

Similar Messages

  • Cisco Unity Connection 8.6 not getting CLID information from CUCM 8.6

    Hello,
    Currently Running:
    Cisco Unified Communications Manager 8.6.2
    Cisco Unity Connection 8.6.2
    Problem:
    when any outside caller leaves a voicemail, the caller number information is not being sent to unity.
    example, I call with my cell phone, 817.555.1234 to my Cisco 7940 phone and it shows the CLID information that i am calling with. iDivert to voice mail, Leave a message. Playback message and just the default message information from Cisco Unity.
    we currently upgraded from CUCM 6.1.3 and Unity 5. before i could press 9 and get the caller information.
    I have viewed the "Playback Message Settings" and selected "After Playing Each Message, Play" and selected Sender's Information. and also selected "Include Extension and Sender's ANI"
    upon playing the VoiceMail after the message i get the default message "From Cisco Unity Connection Messaging System"
    I also have the message relaying to my E-mail and I get the same in the subject line.
    "Message from Cisco Unity Connection Messaging System (Unknown extension)"
    This tends to be a big deal with the Sales team as customers will call and say "Call me back"
    But any Internal Calls show the correct information, proper greeting, extension information even on the relay to e-mail.
    Any help will be appreciated.
    Thanks
    Tim

    Found another post that referenced Cisco Bug ID CSCti37610.
    CUC plays message is from Unity Connection Messaging system
    Symptom:Before message playback, Unity Connection plays the message is from Unity Connection Messaging System instead sender's ANI
    Conditions:Problem was observed on Unity Connection cluster and appropriate services are not rebooted after changing the SMTP domain name
    Workaround:
    Restart the Unity Connection servers
    It should have been fixed in 8.5 but we did change the SMTP domain name on 8.6 and now see the problem. Will schedule a reboot and see if the issue goes away.

  • Not able to forward/reply mails in Apple Mail but new mail is going out

    I am using Apple Mail program for my mails, for last 3-4 days I am not able to forward or reply a mail but i am able to send if i compose a new email

    Triple check the Outgoing Mail server info that you entered in your Mail account. If that area says the info is optional enter the outgoing mail server and your password anyway. Also if you have more than one email account check the server that is selected for the GoDaddy account and make sure it's the correct server for the account.

  • HT1695 My Wifi is connected however im not able to access internet nor email any help

    My Wifi is connected however im not able to access internet nor email any help

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
     Cheers, Tom

  • HT204368 I am having trouble pairing my iPhone4 with bluetooth device. It was connected but is not able to connect after both devices were shut and then switched on, as per Apple instructions. phone does find any bluetooth device closeby. how to fix?

    I am having trouble pairing my iPhone4 with bluetooth device. It was connected but is not able to connect after both devices were shut and then switched on, as per Apple instructions. phone does find any bluetooth device closeby. how to fix?

    NovaRiddle wrote:
    I am having trouble pairing my iPhone4 with bluetooth device. ...
    Depends on the device...
    Have a look here for Supported Bluetooth Profiles
    http://support.apple.com/kb/HT3647

  • User not able to print from SAP

    Hi guys,
                 User is not able to print from SAP. The printer is directly connected to his PC. It is not a network printer. The user is able to print at OS level perfectly. IN SP01, it shows in green and the print job has been completed successfully. I can see the output request. Its all fine in SAP. I am not sure why it is not printing from SAP. Please help ?
    Thanks

    hi venkata,
    did you already defined your printer on SAP Server using tcode SPAD ?
    What kind of printing you're using ?
    My suggest for simplest one is create new output devices.
    Type tcode SPAD
    Give simple name
    Choose SAPWIN for device type (if you're using WIndows clients)
    On Access Method tab
    Choose Host Spool Access Method F : Front end Printing or G :
    For Host Printer fill with __DEFAULT (remember double underscore)
    save and test it.
    ardhian
    http://sapbasis.wordpress.com

  • X58 Pro-E Not able to resume from S3 (sleep mode)

    Not able to resume from S3 (sleep mode) if Base Clock is set over 169Mhz  
    ex. ASUS P6T Deluxe Mainboard fix this issue. - bios version is 1403.
    from ASUS site. - Fix System may not able to resume from S3 if Base Clock is set over 170MHz.
    Anybody same Problem??

    Quote from: AstroRetro on 12-November-09, 21:41:14
    I have the exact same issue on my X58 Pro-E.
    I can confirm that from 133 to 166MHz S3 sleep works as expected.  But above this, the PC appears to go to sleep normally, but cannot wake up.  After pressing the power button, the drives spin up and peripherals are powered on, but bios does not load and screen stays blank.  Once the PC internal speaker emitted a continuous buzz as well. Machine is unresponsive to power and reset button at this point and I need to hold power button her several seconds to force power off.  Then when powering on again, the machine will fail to post again, but this time will automatically reboot, pass post and load windows with all previous applications running as if returning from hibernation.
    This issue only occurs when "ACPI standby state" is set to S3 in the Bios.  S1 standby state (the default) works fine at all clocks but of course leaves all the fans running.  I have tried both states of "Re-call VGA Bios from S3" (Enabled/Disabled) and this has no effect on the issue.
    Since this board can happily run at 200MHz FSB with my CPU, and pass all thermal and stability tests I throw at it, it is disappointing that I cannot use this very convenient feature.
    I look forward to a beta bios revision to address this issue.
    I have the exact same issue on my Pro-E. i've tried everything I can think of, but have had no success. Only S1 works. What's odd is that when I had everything stock, sleep mode in S3 worked great.

  • OIM 11G-prepop adapters not able to read from User form

    When I try to auto provision ldap account for users after creation of OIM record using GTC, the ldap provisioning doesnt happen. Basically the prepop adapters not able to read from Xel user form. I am stuck with this issue for a while now .
    I tried remapping..ect etc..ntng helped.
    None of the process form fields are getting prepopulated, when I hard coded avlue in prepop adapters for all the reqd fields in process form, proviosioning gets completed successfully.
    Pls. help me with this.
    Thanks.
    ~VSN
    I get the below errorr:
    <BEA-000000> <Class/Method: tcAdapterExecuter/executeRuleGenerators encounter some problems: java.lang.Exception: Error retrieving user info: User Login
    java.lang.Exception: java.lang.Exception: Error retrieving user info: User Login
    at java.lang.Throwable.<init>(Throwable.java:67)
    at com.thortech.xl.dataobj.rulegenerators.tcAdapterExecuter.executeRuleGenerators(tcAdapterExecuter.java:205)
    at com.thortech.xl.dataobj.util.tcPrePopulateUtility.setDataFromAdapter(tcPrePopulateUtility.java:1020)
    at com.thortech.xl.dataobj.util.tcPrePopulateUtility.prePopulate(tcPrePopulateUtility.java:346)
    at com.thortech.xl.dataobj.util.tcOrderPackages.computeProcessFormData(tcOrderPackages.java:901)
    at com.thortech.xl.dataobj.util.tcOrderPackages.createOrder(tcOrderPackages.java:423)
    at com.thortech.xl.dataobj.util.tcOrderPackages.orderPackageForUser(tcOrderPackages.java:177)
    at com.thortech.xl.dataobj.tcOIU.provision(tcOIU.java:563)
    at com.thortech.xl.dataobj.tcOIU.eventPostInsert(tcOIU.java:303)
    at com.thortech.xl.dataobj.tcDataObj.insert(tcDataObj.java:602)
    at com.thortech.xl.dataobj.tcDataObj.save(tcDataObj.java:474)
    at com.thortech.xl.dataobj.tcTableDataObj.save(tcTableDataObj.java:2905)
    at com.thortech.xl.dataobj.tcUserProvisionObject.insertImplementation(tcUserProvisionObject.java:283)
    at com.thortech.xl.dataobj.tcDataObj.insert(tcDataObj.java:591)
    at com.thortech.xl.dataobj.tcDataObj.save(tcDataObj.java:474)
    at oracle.iam.accesspolicy.impl.handlers.provisioning.ProvisionAccountActionHandler.execute(ProvisionAccountActionHandler.java:104)
    at oracle.iam.accesspolicy.impl.handlers.provisioning.ProvisionAccountActionHandler.execute(ProvisionAccountActionHandler.java:35)
    at sun.reflect.GeneratedMethodAccessor1831.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:600)
    at oracle.iam.platform.kernel.impl.EventHandlerDynamicProxy.invoke(EventHandlerDynamicProxy.java:30)
    at $Proxy284.execute(Unknown Source)
    at oracle.iam.platform.kernel.impl.OrchProcessData.runActionEvents(OrchProcessData.java:1035)
    at oracle.iam.platform.kernel.impl.OrchProcessData.runEvents(OrchProcessData.java:644)
    at oracle.iam.platform.kernel.impl.OrchProcessData.executeEvents(OrchProcessData.java:227)
    at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.resumeProcess(OrchestrationEngineImpl.java:669)
    at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.resumeChildProcess(OrchestrationEngineImpl.java:751)
    at oracle.iam.platform.kernel.impl.OrchProcessData.handleAdditionalChanges(OrchProcessData.java:537)
    at oracle.iam.platform.kernel.impl.OrchProcessData.runEvents(OrchProcessData.java:802)
    at oracle.iam.platform.kernel.impl.OrchProcessData.executeEvents(OrchProcessData.java:227)
    at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.resumeProcess(OrchestrationEngineImpl.java:669)
    at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.resumeProcess(OrchestrationEngineImpl.java:686)
    at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.notifyParentProcess(OrchestrationEngineImpl.java:828)
    at oracle.iam.platform.kernel.impl.OrchProcessData.runEvents(OrchProcessData.java:771)
    at oracle.iam.platform.kernel.impl.OrchProcessData.executeEvents(OrchProcessData.java:227)
    at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.resumeProcess(OrchestrationEngineImpl.java:669)
    at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.resumeChildProcess(OrchestrationEngineImpl.java:751)
    at oracle.iam.platform.kernel.impl.OrchProcessData.handleAdditionalChanges(OrchProcessData.java:537)
    at oracle.iam.platform.kernel.impl.OrchProcessData.runEvents(OrchProcessData.java:802)
    at oracle.iam.platform.kernel.impl.OrchProcessData.executeEvents(OrchProcessData.java:227)
    at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.resumeProcess(OrchestrationEngineImpl.java:674)
    at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.resumeProcess(OrchestrationEngineImpl.java:705)
    at oracle.iam.platform.kernel.impl.OrhestrationAsyncTask.execute(OrhestrationAsyncTask.java:108)
    at oracle.iam.platform.async.impl.TaskExecutor.executeUnmanagedTask(TaskExecutor.java:100)
    at oracle.iam.platform.async.impl.TaskExecutor.execute(TaskExecutor.java:70)
    at oracle.iam.platform.async.messaging.MessageReceiver.onMessage(MessageReceiver.java:68)
    at sun.reflect.GeneratedMethodAccessor2150.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:600)
    at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
    at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
    at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:148)
    at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)
    at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
    at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
    at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
    at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
    at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
    at $Proxy382.onMessage(Unknown Source)
    at weblogic.ejb.container.internal.MDListener.execute(MDListener.java:466)
    at weblogic.ejb.container.internal.MDListener.transactionalOnMessage(MDListener.java:371)
    at weblogic.ejb.container.internal.MDListener.onMessage(MDListener.java:327)
    at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:4659)
    at weblogic.jms.client.JMSSession.execute(JMSSession.java:4345)
    at weblogic.jms.client.JMSSession.executeMessage(JMSSession.java:3821)
    at weblogic.jms.client.JMSSession.access$000(JMSSession.java:115)
    at weblogic.jms.client.JMSSession$UseForRunnable.run(JMSSession.java:5170)
    at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)

    Kevin,
    For manual Proviosioning - It works fine.
    It fails when I create user in OIM using flat file GTC . I have an access policy to auto proviosion that user with ldap.
    As mentioned before, I notice none of the prepops on Ldap process form are able to read value from Xel user form.
    Steps I tried Already:
    1- Checking access policy
    2-remapping process form adapters
    Pls. let me know ur thoughts.
    ~VSN

  • I have a sign of a little lock on the top of my iPhone 4 screen and therefore I am not able to hear from the people who call me unless that I switch the speaker on. What should I do

    I have a sign of a little lock on the top of my iPhone 4 screen and therefore I am not able to hear from the people who call me unless that I switch the speaker on. What should I do

    The little lock has nothing to do with speaker volume.  It means you have locked the rotation on your iPhone.
    Have you tried using the volume control on the side of the iPhone to raise the volume when someone calls?

  • I am not able to download from i tunes store the free games to my ipod, does anyone know

    i am not able to download from i tunes store the free games to my ipod, does anyone know

    mine does the same thing like I tried to download kik and when I went to select apps to sync in my ipod menu it showed up all grey

  • FaceTime can't be installed on "Macintosh HD" because the version of Mac OS X is too new. I removed all traces of FaceTime and still not able to install from App store. New to macbook pro with Lion

    FaceTime can’t be installed on “Macintosh HD” because the version of Mac OS X is too new. I removed all traces of FaceTime and still not able to install from App store. New to macbook pro with Lion.any help with this would be greaty appreciated.

    FaceTime is included in Lion. The App Store version is for 10.6. If you deleted it, restore it from a backup, or reinstall the Mac OS.

  • Hi my name is rachell and im trying to set my brother's new ipod to my computer and it says that im not able to restore from backup because his ipod is to all what can i do? thanks for your help

    file://localhost/Users/rachellmarin/Desktop/Photo%20on%202012-12-05%20at%2020.12 %20%232.jpg

    I do not understand you question/problem.
    What does "not able to restore from backup because his iPod is all" means.
    Also, there is no viewable photo in your post.

  • I am not able download videos from my pc to my iphone 5

    i am not able download videos from my pc to my iphone 5

    It detects the iphone4. i can do everything except the transfering the videos to the phone. this started after updating the itunes version.

  • Has anyone had trouble with the LG 3 Cosmos when a call comes in; I am not able to hear from the caller, but, they can hear me?  The volumn is turned up but I can't seem to resolve the issue?  Thanks

    Has anyone had trouble with the LG 3 Cosmos when a call comes in; I am not able to hear from the caller, but, they can hear me?  The volumn is turned up but I can't seem to resolve the issue?  Thanks

    Oh no, Robinbird18! This is not what we like to hear about your cell phone. It makes it pretty hard to have a conversation with someone when you can't hear them. If you make a phone call out are you able to have a conversation with someone without any issues? How long has this been going on? Have you tried to use the phone on speaker phone to see if that works at all? Please keep us posted.   KevinR_VZW Follow us on Twitter @VZWSupport If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

  • I'm not able to print from iPad - any suggestions?

    I'm not able to print from my iPad. Any suggestions?

    1. Buy a AirPrint enabled printer; see list below
    http://support.apple.com/kb/ht4356
    2. Run the CD provided and setup as network printer; this will setup your printer to the same network as your iPad
    http://i1224.photobucket.com/albums/ee374/Diavonex/1a30ee42.jpg
    3. Start printing from your iPad without wire
    http://i1224.photobucket.com/albums/ee374/Diavonex/93ec77e5.jpg

Maybe you are looking for

  • What is the best version of Firefox to use with Windows 7?

    Ever since I've started using Windows 7 I've had issues with Firefox. It randomly crashes or becomes unresponsive, it slows to a crawl, Flash player crashes particularly if I have multiple videos or whatnot open at the same time, it sucks up *way* to

  • I can't play XBOX , error code 805a201b

    Hotmail created, but still not working error 805a201b

  • Account Generator within AP

    Account Generator workflows are available in FA, PA, and PO to derive invoice distribution line account information for AP Invoices created from these feeder systems. We would like to use an Account Generator like workflow to derive the accounting fo

  • Call catalogs from PM order ,BADI PLM_CATALOG_IF

    Hi , We are configuring catalogs for PM order in R/3 . 4.7 seems to have limitation of calling multiple catalogs for order type and plant combination. I saw many threads telling to use the BADI PLM_CATALOG_IF with method "CATALOG_GET_ALTERNATIV" . SA

  • Can't authorize on Win7 E_AUTH_INVALID_KEY_DATA bad padding

    If I want to authorize my Digital Editions program on my Windows 7 32bit. If I enter my credentials I geht the error message you see in the subject. Tried it over several days.