Unity connection domain name

Hi
In fresh unity connaction cluster i insert a domain name from ssh and now i like to delete it from the system.
In cisco doc say how to change it but no delete
Can someone help to resolve this
Thanks
Sent from Cisco Technical Support Android App

Hi Sharon,
In order for the domain name to take effect, you need to have a primary DNS server also added (set network dns primary ).
If you wish to change the domain name, it will be the same command you used to enable in the 1st go ).
If you wish to delete the domain name, then you must delete the DNS server IP address (Primary and Secondary if both are configured) in order for the domain name entry to get removed. Hence there is no command as such to remove the domain name since having a domain name without a DNS or vice versa wont make much sense.
HTH.
Regards,
Harmit.

Similar Messages

Unity/Domino Domain Name Change

I have a Unity server integrated with a Domino message store. We are changing our domain name. The cisco documentation I have found says that you have to rebuild Unity when moving to a new domain. We aren't moving to a new domain just changing the name. Credentials, SID's, QID's are all staying the same we are just changing the domain name. Does anyone know if I will have to rebuild unity given this change or can I simply change the domain name on the unity box?
Thank you in advance!

Java is correct here. I understand that your reaction may be that you can rename a domain and then just reboot member computers twice for the changes to take effect; however, Unity is not a standard member computer. The AD information is not just membership info for the server but part of data that is propagated into SQL and etc. So, you will need to rebuild because essentially this, to Unity, is the same as moving the server to a new domain. You can use the following guide to step thru the process:
http://www.cisco.com/en/US/docs/voice_ip_comm/unity/5x/upgrade/guide/ex/5xcuruge080.html
The key is to make sure you get a DiRT backup and then rebuild to the exact same version of Unity including ES, patches, etc. Then you'll be able to complete the procedures and restore the system via DiRT restore.
Hailey
Please rate helpful posts!

SQL Server Connection Domain Name

I need to make SQL Server Connection. I could make the connection easily in the default instance but not other instances.
If I try,
ServerName.DomainName.Com , it works! like it works with ServerName
If I try,
Servername\InstanceName.DomainName.Com it does not :( but it works with Servername\InstanceName
What am I missing ?

What about the below?
Servername.DomainName.Com\InstanceName

Import Export from CUE to Unity Connection 8+

After looking on CiscoUnityTools.com I see there is one CUE tool for importing Users and recorded name WAVs from CUE into Cxn 8+
Does anyone have a method for moving all the users AND voicemails from CUE systems into Unity Connection, any version?

Hi there,
There are no "free" tools that will migrate greetings and messages
from CUE to Connection.
The one place to look is @ Cisco partner CommonVoices "Now There";
http://www.cisco.com/en/US/prod/collateral/voicesw/ps6789/ps5745/ps6509/solutions_partner_cuc.pdf
They do claim to;
Switch from any traditional
system to Cisco Unity®
Connection
• Greetings, name
announcements, existing
messages, and call trees are
all retained along with
message status
• 10 years of experience
migrating millions of mailboxes
worldwide
http://www.commonvoices.com/products/NowThere.php
What many people do when migrating to a new voicemail system is to leave the
old system accessible for a period of time so that users can access their old
messages. This is what we did when migrating from Octel to Unity Connection
Cheers!
Rob
"What you don't have you don't need it now"
- U2

Unity Connection Speech Connect guest user licensing

I have set up Speech Connect on Unity Connection 8.0(2b) and have a question about importing or manually adding non-inbox users to the Speech Connect directory. From the sparse documents on this feature for Unity Connection it appears that you need to license the server per user to allow this. I have been able to import users from AD and manually add them, but the Corporate Phone Number field is grayed out and blank. We currently don't have any guest licenses installed.
Does anyone know if by adding guest licenses the Corporate Phone Number field would be either filled in during an AD import or editable if adding a user manually?
Thanks,
Mark

For non-subscribers, you need to purchase the appropriate amount of licenses for guest directory user access. The SKU is:
Speech Connect Guest User for Cisco Unity Connection
(for names in the company directory that do not have a Cisco Unity Connection user license)
UNITYCN-SCGUEST
I believe the use of contacts ties into this as well. When you create system contacts in Cisco Unity Connection Administration and enable them to be listed in the directory, they can then be accessed by users from the Connection directory. This allows callers to transfer to the extension of the system contact. I would try that first to see if it allows you to add a contact and enable them for directory access.
Hailey

Do I need a domain name in order to connect to my Mini Server 10.8.2 from outside my network?

I am working on setting up my mac mini server. Aside from in home file sharing I want ot be able to connect to some files remotely and even upload files, say pictures from my camera, to my server from outside my network. I am only looking to have maybe 2 users that have access. Should I get a domain name from a place like GoDaddy? in order to set up server to use domain in initial setup? I have 2 Drobos connected with my music, videos and pictures and I wat to access them from an Android, Windows and iPod device when away from home. Any how-tos out there or good step by step guides?
Thanks for any information.
-Peace
-Dave

A normal address like www.domain.com is intended to work with static IP addresses, DynDNS is a service specifically intended for dynamic addresses and it will therefore automatically update the address e.g. name.dyndns.org to match the dynamic IP address each time it changes.
Some home broadband routers have built-in support to act as a DynDNS client but if yours does not then you can run the DynDNS software on your Mac server. This will then tell the DynDNS servers what your current dynamic IP address is so they can map it to your host name.
The result will be that your users can use a name like yourname.dyndns.org to access your server and not have to worry about the fact your IP address may change.
You would still need to run a VPN server to allow your remote users to connect to your network but OS X Server can do this. You could also run a website but depending on your needs that might be better done by using a web hosting service.

AD Migration from NT 4.0 using New Domain Name & Unity UM

The customer currently has Unity 3.1(5) UM with Exchange 5.5 in NT 4.0 domain. They will be migrating to AD 2000 during phase 1 of the project, which will be followed by Unity upgrade to 4.0(4) a few weeks afterwards.
During the phase 1, Exchange 2003 will be introduced, but the mailboxes will remain in Exchange 5.5 until phase 2.
Here is the migration path proposed by the customer for the phase 1.
1. Current DNS will be isolated to a W2K server with the new domain defined in the DNS. All servers will point to this DNS server as their primary.
2. A BDC will be setup and then removed from our network.
3. Our PDC will be upgraded to Windows 2000 server. AD will be setup with a new domain of XXX.PRV
4. Service packs will be applied to the server.
5. The AD connector will be installed for Exchange 5.5
6. An additional W2K server will be brought online as a DC and additional global catalog.
I do realize that domain name change is not supported for Unity, but would this have any impact on Unity? Basically, the PDC that will be upgraded to W2K DC will retain old domain name (XXX_NT) as the NetBios name whereas the new DNS domain name will be XXX.PRV.
Since Unity does not need to talk to AD or Exchange 2003 at all until the phase 2, Im thinking this would be okay, but wanted to get some expert opinions on it. Also, the customer has tested some legacy servers in the lab, and they were able to authenticate against the XXX_NT domain name in the new XXX.PRV AD environment.
Phase 2 will consist of the following tasks.
1. Run DB Walker.
2. Back up using DiRT.
3. Extend AD schema.
4. Upgrade Unity to 4.0(4).
5. Disconnect Unity from Exchange 5.5.
6. Upgrade Exchange System Manager on Unity.
7. Re-establish Exchange partner relationship using Exchange 2003.
8. Run DB Walker.
9. Move Exchange 5.5 mailboxes to Exchange 2003.
Thank you bunch!
Han

Your project (from oh so long ago) looks very similar to what I am proposing to do now. I currently run Cisco Unity 4.0.4 SR1 with Exchange 5.5 (Unified Messaging), on an NT4 network. I have recently upgraded my network to Windows 2003 with Active Directory. I am building a new Exchange 2003 server in the new domain but not upgrading Unity 4.0.4--at least, not yet. I am looking to change the Partner Exchange server to point at the new Exchange server. I see no docs that cover such a scenario--only lateral moves (5.5 to 5.5, 2003 to 2003). As long as the ADC is in place, do you think I even have to change the Partner server when my new Exchange server comes online (initially)? How did your project turn out? Did you have to change the process you outlined above?
Thanks for any info!
John

Connection Errors to Remote Desktop from OSX after Domain name change

We have an issue using Microsoft Remote Desktop from Macs in our school. All was well until we changed the domain name of our RDS servers and installed a new wildcard certificate. Connections work perfectly in Windows 7/8 and also iOS on iPads, but we cannot
get any Macs to connect having tried OSX 10.7 and 10.9. The error message says the connection failed to load but seems to add a spurious end to the connection string - TS/en-US/Default.aspx - but we cannot trace where this is being picked up.
We can get to the site in a web browser and sign in to receive the "browser not supported" message in Safari so traffic is obviously getting to the severs.
Has anyone else had a similar issue? We have spent days poking around with DNS etc but can't seem to make any progress here.

Hi Jeremy,
I have tried removing connections and also re-installing the App. We have been using this App since January with no real issues until we made our domain name change - I really don't understand why it works fine in Windows and iOS but not OSX. We are doing
nothing different to what we have done from day 1.
Log file from our old connection when it was working looked like this:
[2014-Mar-24 10:41:43] RDP (0): Final rdp configuration used: redirectcomports=1
server port=3389
use multimon=1
redirectdrives=1
promptcredentialonce=1
authentication level=0
full address=rdsfarm.xxxxxxx.internal
session bpp=16
prompt for credentials on client=1
redirectprinters=1
drivestoredirect=*
alternate shell=||OpenMind
gatewayusagemethod=2
alternate full address=rdsfarm.xxxxxx.internal
workspace id=rdsgw.xxxxxxx.internal
allow font smoothing=1
redirectposdevices=0
audiocapturemode=1
gatewaycredentialssource=0
remoteapplicationname=OpenMind 2.0
devicestoredirect=*
remoteapplicationmode=1
remoteapplicationprogram=||OpenMind
enablecredsspsupport=1
redirectsmartcards=1
redirectclipboard=1
span monitors=1
gatewayprofileusagemethod=1
gatewayhostname=rds.xxxxxxx.sch.uk
remoteapplicationcmdline=
The log file looks very different now, all I am getting is:
[2014-Jun-17 10:26:41] RDP (0): --- BEGIN INTERFACE LIST ---
[2014-Jun-17 10:26:41] RDP (0): lo0 af=18 addr= netmask=
[2014-Jun-17 10:26:41] RDP (0): lo0 af=30 (AF_INET6) addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
[2014-Jun-17 10:26:41] RDP (0): lo0 af=2 (AF_INET) addr=127.0.0.1 netmask=255.0.0.0
[2014-Jun-17 10:26:41] RDP (0): lo0 af=30 (AF_INET6) addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
[2014-Jun-17 10:26:41] RDP (0): gif0 af=18 addr= netmask=
[2014-Jun-17 10:26:41] RDP (0): stf0 af=18 addr= netmask=
[2014-Jun-17 10:26:41] RDP (0): en0 af=18 addr= netmask=
[2014-Jun-17 10:26:41] RDP (0): en1 af=18 addr= netmask=
[2014-Jun-17 10:26:41] RDP (0): en1 af=30 (AF_INET6) addr=fe80::21f:5bff:feb8:3f72%en1 netmask=ffff:ffff:ffff:ffff::
[2014-Jun-17 10:26:41] RDP (0): en1 af=2 (AF_INET) addr=192.168.0.65 netmask=255.255.255.0
[2014-Jun-17 10:26:41] RDP (0): fw0 af=18 addr= netmask=
[2014-Jun-17 10:26:41] RDP (0): --- END INTERFACE LIST ---
[2014-Jun-17 10:26:41] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
[2014-Jun-17 10:26:41] RDP (0): client version: 8.0.24875
[2014-Jun-17 10:26:41] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-Jun-17 10:26:41] RDP (0): correlation id: 9f18df13-7c84-dc4b-a780-e6b77a280000
[2014-Jun-17 10:26:41] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2014-Jun-17 10:26:41] RDP (0): ------ END ACTIVE CONNECTION ------
[2014-Jun-17 11:44:15] RDP (0): *** Application terminated ***
[2014-Jun-18 09:51:37] RDP (0): *** Application terminated ***
[2014-Jun-19 12:00:19] RDP (0): *** Application terminated ***
[2014-Jun-19 12:15:32] RDP (0): *** Application terminated ***
[2014-Jun-19 12:16:21] RDP (0): *** Application terminated ***

Problem connecting through RFC with fully qualified domain name

I am using the .NET Connector and RFC to call a BAPI
I use a fully qualified domain name in the form <DOMAIN>\<HOST>
The RFC seems to have problems with this form of address. It produces the following execption in my .NET code.
SAP.Connector.RfcCommunicationException: Connect to SAP gateway failed
LOCATION    CPIC (TCP/IP) on local host
ERROR       hostname 'DOCUNET_AG\DWSAP' unknown
TIME        Mon Feb 05 11:57:20 2007
RELEASE     640
COMPONENT   NI (network interface)
VERSION     37
RC          -2
MODULE      ninti.c
LINE        329
DETAIL      NiPGetHostByName2: hostname 'DOCUNET_AG\DWSAP' not found
SYSTEM CALL gethostbyname_r
ERRNO       11004
ERRNO TEXT WSANO_DATA: Valid name,
   at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo
, Encoding encoding, String languangeCode)
   at SAP.Connector.SAPConnection.Open()
What can I do that I am able to use a fully qualifies domain name in this way?
Thank you very much for your answers.
Mirco

Hi Mirco,
additional to my first reply, open a shell window and type
<b>
ping <computername>
</b>
or
<b>
ping -a <ipaddress>
</b>
so you should get the full qualified name for the host.
Regards
Holger

Cannot connect to SQL Azure by allowing Domain Name in Firewall

*.database.windows.net:1433/tcp is getting resolved as IP address in corporate firewall but the corporate firewall is configured to allow only domain names.Is there a way to connect to SQL Azure without domain name getting resolved into IP.
All the http traffic are allowed by firewall for blobs,queues and tables.

Hello,
Did you means that you connect to the SQL database with IP address? If I understand correctly, you can not rely on the IP address when connect to Windows Azure SQL database.
SQL database is hosted on a virtual machine at the Microsoft datacenter and shared resource with other databases. Static IP addresses are not supported on Windows Azure virtual machines, it is use dynamic address.
What's more, one SQL Database keep at least three SQL Server databases replica that are distributed across multiple physical servers in a single data center and automatic cluster failover when a hardware fails on one server. In that case, the real IP that
is behind server might change in any moment.
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support

Could domain name change after Unity migration?

Hello everyone,
I will upgrade Unity3.1(6) to Unity 4.0(5) (Voice Mail only).Here is the main steps:
1. backup current Unity data
2. install Windows2K server w/Exchange 2000,Unity3.1(6) from scratch.(not replacing server hardware,
Windows2k server and Exchange 2000 server are located in the same server)
3. recover Unity data on new installed windows2000 w/Exchange 2000 server
4. Upgrading Unity3.1(6) to Unity 4.0(5)
I got a few questions here.
1. Should Domain name keep the same? ( If I need to change Domain name, is it applicable?)
2. Should I run Active Directory connetcor for recovering Exchange5.5 data?
Hope to share experience with you. Thanks for your reply.
Background:
Unity 3.1(6), Exchange5.5 installed on Windows2000 server A,
Users in WindowsNT 4.0 PDC server B,
After migrating:
Remove WindowsNT 4.0 PDC server B,
windows server A will be Domain Controller w/Exchange2000, Unity 4.0(5)
Howard

Hello,
I don't understand why you are going to rebuild the server, if you just want to upgrade to Unity 4.0 (I am assuming that you currently have W2K); you just need to:
- Do a Dirt backup
- Upgrade to Exchange 2K
- Do a Dirt backup
- Install the CUSPA and CUICA
Just follow the instructions on this link:
http://www.cisco.com/univercd/cc/td/doc/product/voice/c_unity/rug/ex/ru_020.htm#wp1040363

Connecting web domain names with Iweb

How does one find out who owns a domain name? I think I own the Dispatchtothediaspora.net web site via Register.com Yet when I tried to connect it in the I web it keeps telling me that someone else owns the site. How is this? Any help would be greatly appreciated! Thanks, rianpk

Yet when I tried to connect it in the I web it keeps telling me that someone else owns the site.
That's not what I get. It says coming soon, meaning you haven't done anything to connect it to a site yet. As for ownership, see
http://who.godaddy.com/WhoIs.aspx?domain=dispatchtothediaspora.net&prog_id=godad dy

I have two location one is Delhi(IP-192.168.100.*) and another is Mumbai(IP-192.168.1.*) and both are connected by MPLS line and ping with each other. We have one DC in Delhi location and domain name is CAPLDC and Delhi location all PC is member of this

I have two location one is Delhi(IP-192.168.100.*) and another is Mumbai(IP-192.168.1.*) and both are connected by MPLS line and ping with each other.
We have one DC in Delhi location and domain name is CAPLDC and Delhi location all PC is member of this domain and working properly.
now i am trying join the Mumbai location PC with my Domain(CAPLDC) but they are not join with my DC and generate the error.
I have chek the DNS and nslookup all are correct but this is generate error.
Is this possible Mumbai location join with this Domain(CAPLDC)???
One more thing when i have created another DC with this name (papldc.com) then Mumbai location is joined properly.
Pls find the error message below and also find the attachment.
Note: This information is intended for a network administrator. If you are not your network's administrator, notify the administrator that you received this information, which has been recorded in the file C:\Windows\debug\dcdiag.txt.
The domain name "capldc" might be a NetBIOS domain name. If this is the case, verify that the domain name is properly registered with WINS.
If you are certain that the name is not a NetBIOS domain name, then the following information can help you troubleshoot your DNS configuration.
DNS was successfully queried for the service location (SRV) resource record used to locate a domain controller for domain "capldc":
The query was for the SRV record for _ldap._tcp.dc._msdcs.capldc
The following domain controllers were identified by the query:
capldcserver.capldc
win-dyfq2poc88q.capldc
However no domain controllers could be contacted.
Common causes of this error include:
- Host (A) or (AAAA) records that map the names of the domain controllers to their IP addresses are missing or contain incorrect addresses.
- Domain controllers registered in DNS are not connected to the network or are not running.
Pankaj Kumar

Why are you using a single labeled domain? I would recommend renaming the domain name to be something like domain.com.
Please refer to the articles below to fix your current issue:
http://www.wincert.net/tips/networking/1614-cant-join-pc-to-a-domain-with-single-label.html
http://www.itgeared.com/articles/1128-using-single-label-dns-names-for-active/
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

Pb connecting from client to database after changing domain name

Hi,
I've got 3 databases wthis 3 listeners. all worked well since we change domain name. database server is in DMZ and is reconize witn 2 IP adresses.
I can ping with tnsping but when I run sqlplus user/passwd@ORACLE_SID I've got this message : ERROR:
ORA-12535: TNS : le dÚlai imparti Ó l'opÚration est ÚcoulÚ
on local host this command run well and connect to database.
is there somebody that knows this problem and its solution?
Thank you for your help.
PS: I'm on oracle 9.2.0 and windows200 server and client

I've got this message in listener.log
Démarré avec pid=3028
Ecoute sur : (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC0ipc)))
Ecoute sur : (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=bam_sgbd.imelios.com)(PORT=1522)))
TIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE
19-MAR-2004 14:21:33 * (CONNECT_DATA=(SERVICE_NAME=ADRPRODR)(CID=(PROGRAM=c:\oracle\ora92\bin\sqlplus.exe)(HOST=U0011001)(USER=BerPRE))) * (ADDRESS=(PROTOCOL=tcp)(HOST=10.2.80.180)(PORT=2032)) * establish * ADRPRODR * 0
19-MAR-2004 14:34:36 * (CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=ADRPRODR)(CID=(PROGRAM=C:\oracle\ora92\bin\sqlplus.exe)(HOST=BAM_SGBD)(USER=BAM_SGBD))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.80.223)(PORT=2394)) * establish * ADRPRODR * 0
19-MAR-2004 14:40:53 * (CONNECT_DATA=(SERVICE_NAME=ADRPRODR)(CID=(PROGRAM=c:\oracle\ora92\bin\sqlplus.exe)(HOST=U0011001)(USER=BerPRE))) * (ADDRESS=(PROTOCOL=tcp)(HOST=10.2.80.180)(PORT=2195)) * establish * ADRPRODR * 0
19-MAR-2004 14:44:18 * (CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=ADRPRODR)(CID=(PROGRAM=C:\oracle\ora92\bin\sqlplus.exe)(HOST=BAM_SGBD)(USER=BerPre))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.80.223)(PORT=2809)) * establish * ADRPRODR * 0
19-MAR-2004 14:57:52 * (CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=ADRPRODR)(CID=(PROGRAM=C:\oracle\ora92\bin\sqlplus.exe)(HOST=BAM_SGBD)(USER=BAM_SGBD))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.80.223)(PORT=3413)) * establish * ADRPRODR * 0
19-MAR-2004 15:11:47 * (CONNECT_DATA=(SERVICE_NAME=ADRPRODR)(CID=(PROGRAM=c:\oracle\ora92\bin\sqlplus.exe)(HOST=U0011001)(USER=BerPRE))) * (ADDRESS=(PROTOCOL=tcp)(HOST=10.2.80.180)(PORT=2433)) * establish * ADRPRODR * 0
19-MAR-2004 15:55:59 * (CONNECT_DATA=(SERVICE_NAME=ADRPRODR)(CID=(PROGRAM=c:\oracle\ora92\bin\sqlplus.exe)(HOST=U0011001)(USER=BerPRE))) * (ADDRESS=(PROTOCOL=tcp)(HOST=IP_ADRESSE)(PORT=2561)) * establish * ADRPRODR * 0
19-MAR-2004 15:56:26 * (CONNECT_DATA=(SERVICE_NAME=ADRPRODR)(CID=(PROGRAM=c:\oracle\ora92\bin\sqlplus.exe)(HOST=U0011001)(USER=BerPRE))) * (ADDRESS=(PROTOCOL=tcp)(HOST=IP_ADRESSE)(PORT=2568)) * establish * ADRPRODR * 0
this seems to work pas on client connection doesn't arrive

Unity Connection SIP trunk integration vs alerting name

Hello,
I have been implementing a Unity Connecion 8.6 with a CUCM cluster 8.6 via a SIP trunk.
The previous implemention of the Unity server was set up using voicemail ports;
When users used to call the voicemail pilot number, we were able to configure an alerting name on the vm ports, saying (to VoiceMail) for example.
I am looking for a solution for the new implementation via the SIP trunk. I just want users to see 'to VoiceMail' on their phone when they call the Unity Connection system.
Thanks for the help!
Best regards,
Antoine

I have found the solution:
If you want to dispaly a name such as Voicemail, etc you can change that in Unity Connection under Port Group --> Advanced Settings --> "Remote-Party-ID"
cheers!

Unity connection domain name

Similar Messages

Maybe you are looking for