Unity Connection LDAP Error

I'm trying to setup a Unity Connection server with an LDAP directory and when I save the configuration I get this error message:
Error while Connecting to ldap://172.16.1.2:389, null
The UCONN server is connecting to a Windows 2000 DC running Exchange 2003.
I think I'm missing something simple but I'm not sure what.
Thoughts?

Hi,
Sounds like you may either have an incorrect IP address and/or port # for your DC or GC. Port 389 for a Domain Controller, and if the server is a Global Catalog, you'll need port 3268. Another possibility is that port 389 may be blocked by some sort of ACL or firewall. I would try the port change first and re-verify your IP address and if that doesn't get you anywhere, setting up a network capture to see what may be happening during the bind request is your next step.
Hope that helps,
Brad

Similar Messages

Unity Connections - Miu Errors

Opening a TAC case but if anyone has anything...Basically, I just ran Bulk Edit and changed the Error Greeting "After Greeting Action" for just ONE Class of Service.
As soon as we did this, Unity Connections completely stopped working. The Ports Answer but then drop immediately. The Event Viewer is filling up with these errors:
Event Type: Error
Event Source: CiscoUnity_PHGreeting
Event Category: Error
Event ID: 437
Date: 4/13/2006
Time: 1:50:34 PM
User: N/A
Computer: LKQUNITY01
Description:
An unexpected error occured while trying to play greeting for a subscriber. One possible reason could be that the call was disconnected while waiting for the phrase. This can happen when the Unity system CPU is pegged. Technical details - (PersonalGreeting) greeting for call handler id (null) with alias . returned [0x80004005] on line 1164 of file .\PHGreeting.cpp.
Bulk Edit on regular Unity servers has never caused me any issues in the past.

Event Type: Error
Event Source: CiscoUnity_Wav
Event Category: Error
Event ID: 801
Date: 4/13/2006
Time: 1:50:34 PM
User: N/A
Computer: LKQUNITY01
Description:
Cisco Unity's multi-media component has enountered a serious error.
EXPLANATION:
A serious failure has occurred on port LKQCCM-1 during wav media processing. Depending upon the severity of the failure, parties on this call could experience unexpected behavior or be disconnected. In some cases, further calls on this port will not be handled correctly.
TECHNICAL DETAILS:
Thread 0x000019AC had a Failure on Port LKQCCM-1 in AvWav
DESCRIPTION:
File: .\Wav.c(1999)
Method: WavPlayEx
Failure: call to WavOutOpen failed.

Unity Connection Upgrade Error from 8.6.2.20000-2 to 8.6.2.22900-9

Hello,
After 2 hours my Unity show me this folow error. Anybody see this error?
06_load-database|Depending on the server specifications and on the level of activity on the system, this may take up to an hour.|<LVL::Info>

And that's not an error, if you look closely at the end, it says INFO
HTH
java
if this helps, please rate
www.cisco.com/go/pdihelpdesk

Unity Connection 8.6.2 report error and issues

Hello,
I found some other hits on this error and tried the workarounds (restarting tomcat, and report data harvester) but am still getting "Unable to find any report data based on parameter(s)" for a certain timeframe on multiple reports when I know activity occurred in that timeframe.
User Phone login report, Outcall Billing Detail Report, others.
CUC version is 8.6.2.20000-2
Problem is during this timeframe someone dialed into system and changed the transfer extensions to various LD numbers throughout an entire day and the reports aren't showing these outcalls. Call Manager CDR data show the calls being placed from Unity VM ports and the Unity Conversation Manager traces I grabbed for the timeframe show the calls to those numbers to. I'm just trying to match up with a report and figure out if there is some other log or trace file I can look to determine for sure the caller logged in to the voicemail box and changed the transfer extension on it. (guessed the voicemaill password). The failed log in report doesn't even show the failed login attempt in output from traces below. The transfer extension dest addr was different on the transfers on this same mailbox. Have locked down the system since but want to get better grip on this with the reports and traces.
I looked over the CUC 8.6.2 SU1 and SU2 release notes and not seeing any resolved bugs for these matters either.
Here are some samples lines from Conversation Manager traces:
00:32:46.399 HDR|02/04/2013 ,Significant
00:32:46.399 |9744,PhoneSystem-1-001,E68CA6DB3CAE4118BE9F9612BD3540A9,Arbiter,-1,Incoming Call [callerID='' callerName='' calledID='555123' redirectingID='555123' lastRedirectingID='555123' reason=4=FwdNoAnswer lastReason=8=FwdUncond] port=PhoneSystem-1-001 portsInUse=1 ansPortsFree=23 callGuid=E68CA6DB3CAE4118BE9F9612BD3540A9
00:33:55.006 |9744,PhoneSystem-1-001,E68CA6DB3CAE4118BE9F9612BD3540A9,MiuGeneral,25,Enter CAvMiuCall::TransferEx destAddr='715551231234' type=2=Release maxRings=4 mediaSwitch='00a499fa-a193-45b0-a153-564a64019eb8'
00:33:58.955 |9744,PhoneSystem-1-001,E68CA6DB3CAE4118BE9F9612BD3540A9,MiuGeneral,25,Exit CAvMiuCall::TransferEx=0x00000000=S_OK
00:34:37.090 |9832,PhoneSystem-1-001,9DB394E443A3419FA0020BC9D1A92806,Arbiter,-1,Incoming Call [callerID='' callerName='' calledID='555123' redirectingID='555123' lastRedirectingID='555123' reason=4=FwdNoAnswer lastReason=8=FwdUncond] port=PhoneSystem-1-001 portsInUse=1 ansPortsFree=23 callGuid=9DB394E443A3419FA0020BC9D1A92806
00:34:50.403 |9832,PhoneSystem-1-001,9DB394E443A3419FA0020BC9D1A92806,CDL,11,CCsCdlImsAccess::AuthenticateSubscriber: Cannot authenticate user: JOESMITH IMS Result Code: 1 on line 108 of file CdlIms/src/CsCdlImsAccess.cpp: Error: 0x80046505 Description: E_CDL_SP_EXEC_FAILURE
00:34:50.403 |9832,PhoneSystem-1-001,9DB394E443A3419FA0020BC9D1A92806,CDE,3,Authentication Failed for Subscriber 555123 (Src/CsCallSubscriber.cpp 2969)
00:34:50.404 |9832,PhoneSystem-1-001,9DB394E443A3419FA0020BC9D1A92806,-1,-1,An invalid password entered when trying to log into a user mailbox. Details - [].
00:36:29.331 |9832,PhoneSystem-1-001,9DB394E443A3419FA0020BC9D1A92806,MiuGeneral,25,Enter CAvMiuCall::TransferEx destAddr='715551231234' type=2=Release maxRings=4 mediaSwitch='00a499fa-a193-45b0-a153-564a64019eb8'
00:36:33.484 |9832,PhoneSystem-1-001,9DB394E443A3419FA0020BC9D1A92806,MiuGeneral,25,Exit CAvMiuCall::TransferEx=0x00000000=S_OK
00:44:53.444 |9743,PhoneSystem-1-001,FEB6975B82284F37A161CD66ECBA61C6,Arbiter,-1,Incoming Call [callerID='' callerName='' calledID='555123' redirectingID='555123' lastRedirectingID='555123' reason=4=FwdNoAnswer lastReason=8=FwdUncond] port=PhoneSystem-1-001 portsInUse=1 ansPortsFree=23 callGuid=FEB6975B82284F37A161CD66ECBA61C6
00:45:20.019 |9743,PhoneSystem-1-001,FEB6975B82284F37A161CD66ECBA61C6,MiuGeneral,25,Enter CAvMiuCall::TransferEx destAddr='715551231234' type=2=Release maxRings=4 mediaSwitch='00a499fa-a193-45b0-a153-564a64019eb8'
00:45:24.121 |9743,PhoneSystem-1-001,FEB6975B82284F37A161CD66ECBA61C6,MiuGeneral,25,Exit CAvMiuCall::TransferEx=0x00000000=S_OK
Thanks

Hello ebergquist,
As advised we could try to run a report before an upgrade was performed to verify if it will pull the information, which in the event it does we would be matching the bug, therefore access the CUC CLI and type the following command: file get install *
You will be required to have an SFTP available for the file transfer and port 22 open on the sftp client.
Once you receive the files you would need to check system-history.log, below is an example.
=======================================
Product Name -    Cisco Unity Connection
Product Version - 8.5.1.12900-7
Kernel Image -    2.6.9-89.0.20.EL
=======================================
02/24/2013 13:35:02 | root: Boot 8.5.1.12900-7 Start
02/24/2013 16:03:45 | root: Install 8.5.1.12900-7 Success
Once you check the time stamp and date of the upgrade try to gather a report for a time range before the upgrade was performed, even though they might be overwritten, there still could be a possibility that it succeeds.
If this bug is not the issue then you might want to take into consideration:
1. Make sure that the service ReportDB is [STARTED] in the output of the command: utils service list.
2. If you have Digital Networking on your server make sure there is no stalled replication. Go to RTMT (Real Time Monitoring Tool)> Syslogs> Select on the dropdown your server> Doble click on Application logs> CiscoSyslog. You can then do a manual search or sort with the filter option:
Severity: Error
App ID: CuReplicator
Hit apply. Below is an example:
Date: Feb 19 08:01:15
Machine Name: LAB1111
Severity: Error
App ID: CuReplicator
Message: : 1151681: LAB1111.corpnet2.com: Feb 19 2013 08:01:11.662 UTC : UC_UCEVNT-3-EvtReplicatorStalledReceiveReplication %[ClusterID=][NodeID=LAB1111]: Detected stalled replication receiving from location LAB1111. Waiting for missing USN 2222. This situation may indicate network connectivity problems.
3.Make sure that replication is working properly in the cluster. You can check them via the following commands: showcuc cluster status    and   utils dbreplcation runtimestate
For the TransferEx that you state changed to ceros -> TransferEx=0x00000000=S_OK , this is just a hexadecimal value that is returned stating that the transfer that took place during the call was successful, in this case the actual transfer was to the following destination -> TransferEx destAddr='715551231234', and was during a call to ->calledID='555123' , this does not have to do with the actual change of a transfer number performed by a user.
Those traces won't be enough you will have to additionally set: ConvSub, level 3   and CDE, level 16 so that you may see output in the traces as the example posted in the previous thread.
Traces would be the path to follow in order to verify the user that changed the transfer rule, as this is as i understand the goal your pursuing.
However if it is of any help, another way to get on hold of the numbers that were updated on the Transfer Rule is to use the User Data Dump tool, this information reflects changes regardless of whether it was done via TUI (Telephone User Interface) or GUI (Graphic User Interface). For more information on the tool go to:
http://ciscounitytools.com/Applications/CxN/UserDataDump/Help/UserDataDump.htm
Traces are extensive to be reviewed if done manually, however you can do a text search with a tool as Notepad ++ to look for keywords as "NewTransferNumber =" or "CDE,16,Transfer allowed", once you find this you check the call GUIDwhich is the reference number of the call and that exists during the entire length of the call, whether it is while a person is leaving a voicemail or the user is accessing his/her's inbox. This would speed up your search.
So as explained in the first thread you would then do another text search returning all possible matches with that callGUID.
Now if you get to the very beginning of the call you would see something like:
Line 13712: 18:58:05.156 |24720,CCIE-1-001,0C9C97BDF5F444F0B535D231C32DDCB4,Arbiter,-1,Incoming Call [callerID='2199' callerName='' calledID='6789' redirectingID='' lastRedirectingID='' reason=1=DirectlastReason=1024=Unknown] port=CCIE-1-001 portsInUse=1 ansPortsFree=1callGuid=0C9C97BDF5F444F0B535D231C32DDCB4
In this example you see my test user callerID='2199' calling the Pilot number 6789 which is the voicemail button
calledID='6789, and the what type of call is it whether Forward or Direct, when logging to voicemail you are going to see Direct which is going to match the Direct Routing Rules and send the call to the attempt sign in conversation.
The other approach is a rule out method between the Audit traces and the User Data Dump tool.
So let's say you have a baseline document that states all of the Transfer numbers for all users.
If the User Data Dump reflects a different number and the Audit logs do not show any change, starting from the time the baseline was created and the point of time where the number was changed, then you could deduce the change was done via TUI (Telephone User Interface). Unfortunately you wouldn't be able to tell who did the change in this case.
Nevertheless, remember that a user may have for example an Alternate Extension so the change might not necessarily be done from the office phone: "Alternate extensions can make calling Cisco Unity Connection from an alternate device—such as a mobile phone, a home phone, or a phone at another work site—more convenient. When you specify the phone number for an alternative extension, Connection handles all calls from that number in the same way that it handles calls from a primary extension (assuming that ANI or caller ID is passed along to Connection from the phone system). This means that Connection associates the alternate phone number with the user account, and when a call comes from that number, Connection prompts the user to enter a PIN and sign in."
Best regards,
David Rojas
Cisco TAC Support Engineer, Unity
Email: [email protected]
Phone: 1-407- 241-2965 ext 6406
Mon, Wed, and Fri 12:00 pm to 9:00 pm ET, Tue and Thu 8:00 am to 5:00pm ET
Cisco Worldwide Contact link is below for further reference.
http://www.cisco.com/en/US/support/tsd_cisco_worldwide_contacts.html

ERROR WHILE FORWARDING VOICE MESSAGE FROM NOTES VIEWMAIL TO ANOTHER VOICEMAIL USER IN UNITY CONNECTION

Hello All,
I am facing problem while replying/forwarding or sending a NEW Voice Message from ViewMail integrated with IBM LOTUS Notes 8.5 to the other Voice Mail User Configured in Cisco Unity Connection.The ViewMail Version is 8.0.2 for IBM LOTUS Notes.UC version is 8.x
I have attached the file that displays the error.
From the view mail inbox if i "Right Click" any email and the "Click ON Forward" I am able to forward the Voice Message from the ViewMail to the IBM LOTUS Domino user [ that is forwarding it to EMAIL Account ], but if I try to forward it to unity user is gives "Failure Delivery".
Now when I double click the individual voice mail message in ViewMail account and then click on "Forward/reply/NewMemo" icon available on the individual voice message window that I have opened ,I get an error as stated below
"The remote name could not be resolved error in Notes ViewMail 10.0.0.152e_vmws_gen_property_not_found "
where 10.0.0.152 is the IP-Address of my Unity Connection Server.
Also just for the information I am able to Login into Cisco PCA for alll the users and able to view the Inbox.
I am able to forward the VoiceMessages between Unity Connection users via CISCO PCA without facing any issue.
A Quick Help will be much appreciated .......... :-)
Hasan Jafri

Hello Craig,
After spending sometime on troubleshooting , just for testing purpose I created two new Unity Connection Voice Mail User and configured VMN [VoiceMail for Notes] account on the same lotus Notes.
Interestingly this time I was able to use Reply & Reply to All option to send the Voice Message via VMN. {WORKING JUST FINE,NO PROBLEM WHAT SO EVER ]
But still I am NOT able to use Forward option to send the Voice Messages via VMN.
REPLY WITH HISTORY & REPLY TO ALL WITH HISTORY options are also not working.
This is error that I am getting
"Error in QueryServe in CoreUCClasses 213 at line 336:Vmws:The remote server returned an error:(403) Forbidden
I HAVE CREATED VIDEO RECORDING FOR THIS ERROR & WORKING PART OF THE CONFIG TO GIVE YOU A BETTER IDEA OF THE PROBLEM.
Its 7 MB Recording. I hope you can easily Download.
Also important point is that i don't see any previous error that was accuring during my earlier testing.
Thanks & Regards,
Hasan Jafri

Unity Connection 10.5.1: I upgraded the Unity Connection Server from V 9.1. After that, cannot logn to ELM an error message " The server encountered an internal error that prevented it from fulfilling this request." appears

Unity Connection 10.5.1: I upgraded the Unity Connection Server from V 9.1. After that, cannot logn to ELM an error message " The server encountered an internal error that prevented it from fulfilling this request." appears. The error further displays "
type: Exception report
message:
description: The server encountered an internal error that prevented it from fulfilling this request.
exception:
ServletException Could not initialize class com.cisco.vos.platform.api.config.UpgradeStatus
root cause:
NoClassDefFoundError Could not initialize class com.cisco.vos.platform.api.config.UpgradeStatus
note: The full stack trace of the root cause is available in the logs.
Has anyone experience this issue? Any solutions? Your assistance is greatly appreciated!

Hi Mesut,
you can refer the link for migration
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/connection/10x/upgrade/guide/10xcucrugx/10xcucrug010.html
regds,
aman

Unity Connection 8.6 LDAP or CUCM Import with german special characters called "Umlaut": ä, ö, ü

Hi,
for jabber 9.1 integration i sync'ed all users at Callmanager, Presence and Unity to our LDAP (MS AD). with CUCM and Presence (both 8.6.x), it works fine, just Unity Connection sync the Users from AD, but i cannot import Users with german special characters ä, ö, ü (i.E. German Name in LDAP-su: Müller).
Jabber 9.1 need for Voicemail Integration the AD Authentication. Know somebody, if there is an Workaraound or Fix ?
This is a general issue, with or without Jabber, with sync directly from AD, or indirectly through CUCM (sync'ed with AD)
thx and regards
Jacky

I located an identical defect (CSCts28455) that was closed as unreproducible. The defect references CSCtj73444 "Add support for UTF-8 password to LDAP and RADIUS/MSCHAP" which is added to 8.4.2 with the recommendation of RADIUS/MSCHAP or LDAP only for international character support. It would make sense to go to the latest in your current train (ie: 8.4.4.1.ED) and see if the issue remains. What you want to do appears to be supported.
Matthew

Error Adding user to Unity Connection 7.0.1

Hi,
I have cisco unity connection installed on standalone machine, when i try to add any user i receive error on the attached picture.
How can i solve this issue.
Thanks

The password credentials - either web or voicemail - conflict with the rules in the Authentication Rule(s) applied at the Subscriber Template and/or individual user level. If you have the "Check for trivial passwords" flag checked then your password cannot be generic strings like 123456 or passwords with repeating characters such as 112233 or even aabbccdd - they are considered easy to hack. Either assign new initial passwords or change the Authentication Rules and I suspect your issue will go away.
Hailey
Please rate helpful posts!

Cisco Unity Connection ViewMail Password manual reset after LDAP change

Unity Connection 8.5.1, Viewmail 8.5.4 and Exchange 2010 with 2008 AD
We are migrating to Unity Connection from Unity 7.0.2 and have discovered that when we change our passwords in AD (scheduled every 40 days) this does not get synchronized with viewmail. Users then receive an error indicating the user ID or password is incorrect and then call the helpdesk to find out where to change this setting. Has anyone found a way around this. It is becomking a huge issue with 1200+ employees.
Hopefully it is on a roadmap for cisco as well?
Thanks
Liz

'its really a different user experience' you are telling me!!!
I like the other features that 8.5 brings but the outlook viewmail single sign on design fault is a big mistake. It even effects cupc client as you have to update the voicemail password in their...
I did read all the documentation carefully, it doesnt mention that the passwords do no sync. From a end user point of view, this is a disator. 95% of our users manage the voicemail through outlook, if the password doesnt update in viewmail then they can not retrieve their voicemail.
anyway, i ve spent alot of time and money building the new connection server, but i have no option but to stick to our unity 5 solution. Luckily i noticed this before i changed/migrated people groupwide.
Thanks a million Cisco, I now have to explain this to our IT director....

Unity Connection 8.5 change to LDAP Sync/Authentication

In Unity Connection 8.5(1) Subscribers were imported from CallManager before LDAP was setup, however I then realized I needed LDAP Authorization/integration and enabled LDAP. Users still show CallManager Integration and the LDAP radio box is grayed out.
Can I change the users Integration to LDAP somehow without deleting/adding Subscribers?
If I need to delete them, I assume I can COBRAS Export, Delete subscribers, then add back in integrating with LDAP not CallManager?

Jason,
Here is a doc that explains how to perform this operation:
http://www.cisco.com/en/US/docs/voice_ip_comm/connection/8x/user_mac/guide/8xcucmac105.html#wp1074612
Regards
Solomon

COBRAS Import for Unity Connection 8.5 and Subscriber LDAP Integration Status

Using COBRAS Import for Unity Connection 1.1 Build 212 with Unity 4.2 Voicemail Only and Connection 8.5(1)SU1 with LDAP Directory Integration
When I run COBRAS the old alias matches the new alias and my desire is for subscribers being moved to be LDAP inegrated. However after COBRAS runs, the radio box for LDAP Integration Status on the subscriber is set to Do Not Integrate with LDAP Directory. Is there a way for COBRAS to select Integrate with LDAP Directory when the alias matches on LDAP?

Hi ben,
If you are just importing from and not authenticating against LDAP, then the PIN comes
from the Connection Template you used to build the users;
Note that no passwords or PINs are copied from the LDAP directory to the Connection database. If
you want Connection users to authenticate against the LDAP directory, see the “LDAP
Authentication” section on page 9-7.
http://www.cisco.com/en/US/docs/voice_ip_comm/connection/8x/design/guide/8xcucdg040.html
Cheers!
Rob
"Show a little faith, there's magic in the night" - Springsteen

Error during upgrading Cisco Unity Connection to SU2

Help!
I'm facing an error while upgrading Cisco Unity Connection 8.5.1.10000-26 to SU2 (8.5.1.12900-7).
When it's trying to download the SU2 file (UCSInstall_UCOS_8.5.1.12900-7.sgn.iso ) to Unity Connection after 2GB I get this error:
Error encountered: Upgrade has detected that the ISO file name has been changed from the original name. This is not allowed. MD5 Hash Value: 32:32:db:47:99:48:c6:53:12:e2:78:76:94:90:a4:1d
I tried this from multlpe FTP servers and I downloaded the SU2 file multlpe times assuming the download was bad. I also rebooted the Unity Connection server here and there assuming it was something with the server.
I first tried SU1, but that gave the same error, so I attempted to go with SU2.
Any ideas for resolving this?
Thank you!
-rya

Hi Rya,
OK...well you've certainly done your due diligence here
Did you run an MD5 check after the download to compare the file values?
I had a long look for bugs related to this issue and came up empty so I can't see
a bug being the cause of the issues here. Is it possible for you to try "burning" the
upgrade .iso to a DVD and trying again?
I am also curious why you wouldn't move straight to 8.5(1)SU4
Cheers!
Rob
"Show a little faith, there's magic in the night" - Springsteen

Unity Connection 8.5 alias to ldap username mismatch

Hello,
Can someone help me to determine the correct way to integrate LDAP into CUC after mailboxes have already been created from end users in CUCM especially when the ldap user ID and the CUC alias do not match?
From the cisco guide:
For every Cisco Unity Connection user that you want to integrate with an LDAP user, if the value of the Connection Alias field does not match the value of the LDAP user ID, use Cisco Unity Connection Administration to update the Connection alias so that they do match.
Does this mean that I can change the CUC alias for a voicemail user before doing the ldap integration with no impact to the end user?

Hi Ricardo,
Yes, you can change the alias at any point without
impacting the end user We have to do it all the time
when people get married etc.
Cheers!
Rob

Database commucation error Unity connection

Hi team,
We have a new server installation, we are trying to login to the Cisco Unity Connection server, but instead of login the system give the "database communicartion error" message, any clue about this issue?
Thanks
Best Regards.
fer

Log into the CLI and run 'utils service list' to see if the Cisco DB is running. If it isn't you can try starting it with 'util service start '. If it won't start then it's time to reinstall. I have had this happen to me once before and after TAC spent a few hours digging around they just told me to reinstall. Worked like a charm after that; apparently something secretly blew up during the first install.
Please remember to rate helpful responses and identify helpful or correct answers.

Automating user creation for Unity Connection when sync'd with LDAP

Hi
Is it possible to automatically create users that sync with unity connection?
I have a unity connection 7.0 server that is sync'd with LDAP and i use a ldap filter so that only users with a specific attribute are sync'd. I can see the users when i try to do an import but is there anyway that they can automatically be created

No
Check this check box so that Cisco Unity Connection gets basic information on Connection users from the LDAP directories that you specify on the LDAP Directory page. Data is synchronized only for the Connection users that you created by importing users from the LDAP directory. Connection does not automatically create new Connection users when new users are added to the LDAP directory.
http://www.cisco.com/en/US/docs/voice_ip_comm/connection/7x/gui_reference/guide/7xcucgrg100.html#wp1069724
HTH
java
if this helps, please rate
www.cisco.com/go/pdihelpdesk

Unity Connection LDAP Error

Similar Messages

Maybe you are looking for