Unity connection stop take call every 25 minutes

Hi,
first sorry for my english.
last week i had cucm version 6.1.5 on mcs 7845 h1 and unity connection on mcs 7845 h2. all work fine.
last weekend i upgrade my cucm to version 8.5.1 and i backup the publisher to restore on UCS R210-2121605 (on virtual machine).
i keep the unity connection server on the MCS server.
yesterday on load (many call in same time) the system coming very slow to answer every 20-25 minutes for 5 minutes and unity come back correctly after 5 minutes.
last night i changed server. i toke backup of my mcs to restore on new install of UCS (new installation of unity connection).
during the night all my setup (cucm and unity) work fine.
this morning i have the same trouble. each 20-25 minutes i can't reach voicemail pilot.
I don't have any rtmt error, the cpu and memory of unity and cucm are normal (around 10%).
Alex

this is the solutoin
my unity was registred on call manager publisher on IP 10.64.1.10/255.255.255.0 gw 10.64.1.1 and my subscriber 10.64.1.140/255.255.255.0 gw 10.64.1.129.
my unity connection have ip adress: 10.64.1.170/255.255.255.0 gw 10.64.1.129.
i have i trunck between the 2 switchs with 3 vlan inside. the call managers and unity are in the same vlan but my cucm publisher are in a different building.
i don't know why, but i registred unity connection on subscriber and it's stop freeze each 20 minutes.
the theory said my cucm cluster and my uinty are in the same network (it's work fine before my upgrade) suppose to work and the same network and for communicate outside this network each server toke how gateway. but not each 20 minutes
Alex

Similar Messages

Launchd agent is called every minute for 1 hour

Here is the text of a launchd agent that I put together to fire every Monday at 7:00 PM:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>cas.tch.Machiver</string>
<key>LowPriorityIO</key>
<true/>
<key>ProgramArguments</key>
<array>
<string>/Users/cas/bin/Machiver.sh</string>
</array>
<key>ServiceDescription</key>
<string>Calls the Machiver shell script to delete contents of folders in /Users/cas/bin/Folders2Clean.txt every Monday at 7:00 PM</string>
<key>StartCalendarInterval</key>
<dict>
<key>Hour</key>
<integer>19</integer>
<key>Weekday</key>
<integer>1</integer>
</dict>
</dict>
</plist>
It works tremendously, except that it fires every minute from 7:00 until 7:59 PM before it stops. I have tried to re-order the StartCalendarInterval keys to this:
<key>StartCalendarInterval</key>
<dict>
<key>Weekday</key>
<integer>1</integer>
<key>Hour</key>
<integer>19</integer>
</dict>
But, whenever I do, it reverts to the first order upon loading. (Hour, then Weekday).
Does anyone know, or have any suggestion as to why this is happening?
Thank you very much.

Tell it at which minute to run:
Minute <integer>
The minute on which this job will be run.
along with the other values you're currently using.

Unity Connection 8.6 call transfer to non-unity extension

I have converted from Unity to Unity Connection and am looking for a solution for transferring an incoming call to a non-unity user extension.
Here is the scenario: An PSTN caller calls in and is directed to a Unity Connection Call Handler or a Subscriber greeting. In the greeting they are advised that if they know the extension they want to call, they can dial it at any time. Here is the rub, if they dial an extension for a user listed in Unity Connection, the call gets transferred to the extension. However, if the extension dialed is to an extension that is not a Unity Connection User, the attendant comes back and say the extension is not understood.
In Unity before conversion, I would make an internet user that did not have a mailbox but was listed with an extension. However, with Unity Connection, I am using LDAP integration with Microsoft AD and I don't see a method of doing the same thing.
Is anyone else doing something like this or know of a method to do it?
Thanks in advance.
Gene Keel

In the greeting check this box:
Allow Transfers to Numbers Not Associated with Users or Call Handlers
also make sure the number entered by the call is allowed in Default System Transfer restriction table.

Setting up Unity Connection to email/call cell for new vmail msg

Hello,
I have been trying to setup Unity connection so that it will send an email to Exchange or a message toa cellphone alerting a user that they have a new vmail. I went in under my user account to test (under Edit\Notifcation Devices) and added my email address and my cell but I never get an alert.Where am I going wrong? Any help is appreciated.
We are using Unity Connection 1.2(1).
John

John,
In the Notify Me Of Voice Messages list, make sure that you have chosen Every Voice Message.
Brandon

Unity Connection 8.x Call Admission Control

Hi,
I am trying to find out if there is a separate CAC mechanism for Cisco Unity Connection. Or does it depend on Call Manager Locations for CAC?
Thanks
James

CAC has to be configured either on CUCM and/or on GKs, CUC has nothing to do with it.
HTH
java
if this helps, please rate
www.cisco.com/go/pdihelpdesk

Time capsule keeps dropping ethernet connection to BT Voyager every minute

I have just bought a 1TB TC to get the benefit of better wireless and the backup facility all in one. Previously I used a BT Voyager 2110 as ADSL modem and wireless router. I have set up the TC to connect from the WAN port to the LAN port on the BT router, put TC in bridge mode, and disabled wireless on the BT voyager. This means the BT Voyager does all the DCHP config and PPPoA, transmits this to the TC via ethernet and then TC broadcasts this on wireless. So far so good.
The TC works with this ok, but for whatever reason keeps losing the ethernet connection every minute or so. Literally almost flickering from amber light ('ethernet cable unplugged' for about 1-2 seconds) then back to green light sometimes several times a minute. This means I get no continuous or stable connection, e.g. for downloading/gaming online. The same happens if the BT router is in bridge mode and the TC configures the PPPoA itself - it has to 'renegotiate' every minute or so, which is very frustrating.
The ethernet cable is fine (I have tried two different cables), and each works with no problem if iMac is connected to TC (no internet though obviously), or if iMac is connected via LAN to the router for direct internet access - the network settings in system preferences shows no similar frequent loss of connection. The problem only seems to arise as between BT router and TC via ethernet. I have done resets of both the TC and the router, both are on the latest firmware updates as well so I am now at a loss. If anyone can help it would be really appreciated! Thanks.

Hi there, thanks for your quick reply.
Well I'm not actually trying to get the TC to do that function, merely to wirelessly broadcast what has been negotiated by the BT Router. I.e. the router is not a bridge letting the TC do the work, but rather the router has all the settings and then this is just fed down the ethernet, just like it would be to a computer.
Connection settings have always been 'connect using' ethernet, and 'connection sharing' is off (bridge mode).
The thing is that this config clearly does work as I can get internet access, but I can't work out why the ethernet connection is dropped so frequently (and at all) which means I have no stable connection.
I have tried changing the router to PPPoE, which still gives me internet access but does not resolve the problem of the ethernet connection being dropped.

Cisco Unity Connection 9.1 Call handling

Dears,
I want to configure the call handling means if some body calls on board line 24500000 the corporate opening greeting should be played and then press 1 for sales, press 2 for technical,press 3 for presales, these all audio (corporate greeting, press 1 for sales ,press2 for technical etc....) can be done by a text to speech in unity connection or i have to enroll a audio recording company.
Also please route me to good doc how to configure call handling.
Thanks

Hi Clark,
Just to add a note to the good tips from Chris (+5!)
I would go through the training tips for this great tool designed to build Call Handlers. It's called AudioText Manager;
http://www.ciscounitytools.com/Applications/CxN/ATM/ATM.html
Then you can use the Greetings Administrator Conversation to do all your recordings
http://www.cisco.com/en/US/docs/voice_ip_comm/connection/8x/administration/guide/8xcucsag150.html#wp1049924
Cheers!
Rob
Please support CSC helps Kiva
https://supportforums.cisco.com/blog/12122171/cisco-support-community-helps-kiva

Unity Connection 9.1 - Call back feature

Hello,
Is there a feature that would allow a user to callback the caller from the voice message itself.
For example Calling number 123-123-1234 calls extension 2000 and leaves a voice message. When user with ext 2000 listens to the message from 123-123-1234, can they press a button that would automatically call 123-123-1234.
If anyone can point me to some documentation that would allow this, that would be great ! !
Thanks,
AK

Duplicate
https://supportforums.cisco.com/discussion/12264381/unity-connection-91-call-back-feature

DSL Connection disconnecting every minute

I'm having major issues. I'm in California and as of 6:20pm August 2nd, 2009. My connection has been disconnecting every minute. I restarted my computer and turned my modem off. When I'm browsing through the Internet it disconnects me, and when I try to browse through websites it says "Waiting for website" its getting really annoying. Is there disconnecting issues to anyone in California, especially Southern California?
Keep in mind I've never had this sort of problem before. Is like Verizon doing some kind of work on their DSL lines?
Message Edited by MEMDB on 08-02-2009 06:45 PM

Here is what most of all that stuff means..
Margin (dB) - Signal to noise margin. 6 is pretty bad possibly unusable at times, 20 is very good. You normally want 12dB or better IIRC from back in my DSL days. The higher the number, the better to a point.
Line Attenuation - Measure the amount the signal has degraded. Below 20dB is excellent, above 50 is poor, fill in the dots for anything in between.
Transmit Power - The higher the number, the more power is required to transmit. This number will vary based on the other numbers.
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

Unity Connection 8.5 mailbox quotas

I configured mailbox quotas for user mailbox
Send/receive quota is 3 Mgb
Send Quota is 2 Mgb
Warning Quota is 1 Mgb
User mailbox is already 3.5 Mgb
HOwever, when i call this user from internal or external number - i still can leave a mesage for this user ( i expected system DOES NOT ALLOW to leave any new mesage for this user because his voicemail box is already exceeds Send/receive quota which is 3 Mgb )
Checkbox for option "Full Mailbox Check for Outside Caller Messages"is already checked in
What is wrong in this config ?

Here is how send/receive quotas impact things:
Quota Handling for Outside Caller Messages
By default, if an outside caller attempts to send a message to a user whose send/receive quota has been exceeded, Cisco Unity Connection allows the caller to record a message for the recipient. This can be changed by checking the Full Mailbox Check for Outside Caller Messages check box on the System Settings > Advanced > Conversation page.
If the recipient mailbox has not yet exceeded the send/receive quota at the time an outside caller records a message, but the quota is exceeded in the act of delivering the message, Connection delivers the message regardless of the quota or the setting of the Full Mailbox Check for Outside Caller Messages check box.
Quota Handling for User-to-User Messages
If a user whose voice mailbox has exceeded the send quota signs in to Connection and attempts to send a message to another user, Connection indicates that the send quota has been exceeded, and does not allow the sender to record the message. If the user calls another user and is forwarded to a voice mailbox, the user is able to leave a message, but the message is sent as an outside caller message.
If a user attempts to send a message to another user whose mailbox has exceeded the send/receive quota, or if the quota is exceeded in the act of delivering the message, Connection sends a nondelivery receipt to the message sender.
Connection delivers read receipts and nondelivery receipts to users regardless of whether their quotas have been exceeded.
HTH,
Chris

Stop FF calls out to IP address 72.21.91.19 every 15 minutes

Why does FF call out to the IP address 72.21.91.19?
I found that the IP is part of Edgecast and seemed to be possibly related to FF live bookmarks and/or the latest headline live book mark.
But FF is still trying to go to that IP even after the live bookmark was removed. It tries to do this every 15 minutes and sometimes more often.
Currently I am blocking that IP with my firewall. This seems to be a privacy & security problem. But I have not found a way to completely block live bookmarks. This ONLY happens if FF is open and happens regardless of what site the browser is or has been visiting.
This is an older system and FF ver 3.6.28 ( it's a good old stable W2k OS system). FF is using NoScript, Ghostery, & ADP. The system passes all virus checks, including Malware Bytes and Super AntiSpyware.
tia for help with this
Sam177

cor-el,
Good suggestions. I will work on them probably tomorrow and report back.
FredMcD,
Yes the timing of this repeating itself does make it look suspicious, doesn't it? So this evening I followed your suggestion and completely closed the firewall for a while with FF running. Then checked the FW logs to see what showed up. Then reset the FW to its normal operation and watched its logs some more.
'''1) '''With the FW (OutPost FW) closed, the FF outgoing calls to the IP 72.21.91.19 completely stopped. No call out attempts from FF occurred.
'''2) '''No other items tried to get out than what would be expected. Except for SVCHOST.exe & System which did try to do 4 types of UDP connections.
'''a) '''2/23/2014 11:57:43 PM '''SYSTEM''' OUT UDP 192.168.1.255 138 Block All Activity 0 0
'''b) '''2/23/2014 11:47:16 PM '''SYSTEM''' IN UDP 192.168.1.11 138 Block All Activity 0 229
'''c) '''2/23/2014 11:45:27 PM '''SVCHOST.EXE''' OUT UDP 192.168.1.1 53 Block All Activity 0 0
'''d) '''2/23/2014 11:33:42 PM '''SYSTEM''' IN UDP 192.168.1.11 137 Block All Activity 0 234
'''3) '''The other programs that were running with LAN or net expected connections were email (Eudora 5 instances), Wall Watcher. They were blocked as expected.
'''4) '''During the time the FW was closed, I periodically left the macine alone at times and then did various things like typing text files & saving them, checking different directories, reading and paging thru already open site pages with FF, opening & closing Word Docs. NO FF call outs were attempted. And no call outs except those listed above System & SVCHOST were attempted /blocked.
'''5) '''But when I opened the FW to allow internet connections, in less than a minute, the FF call out to 72.21.91.19 started up again.
Btw the FW log sequence below shows the FW log details for these questionable FF call outs. The sequence of the 4 steps happens at the same recorded time. IE they happen one after the other quickly. And the sequence is commensurate with the way I understand Eset Nod32 Anti-Virus handle the firefox browser by inserting itself between the browser & the internet.
From the FW logs
'''A) '''2/23/2014 9:45:25 PM '''SVCHOST.EXE''' IN UDP 192.168.1.1 53 Generic Host Process DNS UDP connection 0 147
'''B) '''2/23/2014 9:45:25 PM '''FIREFOX.EXE''' OUT TCP localhost 30606 Allow local TCP activity 0 0
'''C) '''2/23/2014 9:45:25 PM '''EKRN.EXE''' IN TCP localhost 4735 Eset NOD32 Service connection 0 0
'''D) '''2/23/2014 9:45:25 PM '''EKRN.EXE''' OUT TCP 72.21.91.19 80 Blocked by IP Blocklist 0 0
Now to add to the discovery, I just added the IP address to the block list for one of my W2k machines. AND on that machine also FF tries to call to that IP address immediately on start up. So this happens with 2 installations of this FF version.
Thanks for this help.
Sam177

Issue with transferring calls to VM for the correct DN Unity Connection 9.1.2

Hi all
I have been facing an issue with a Unity Connection Server v9.1.2. Every time an internal extension (assigned to VM profile and to Unity as a user) which is configured to be transferred to VM after 20 sec or so NoAN,is called , Unity treats the call as the extension of the calling party and not the called party. Furthermore , I dont know if this has any relation with the problem I am facing but when I check the voicemail port status in RTMT its seems like that regardless it is a direct call to the Unity from an extension (dial the pilot number or press the messages button on the IP phone) or a redirected call from an extension to Unity due to NoAN configuration, the Reason is Direct and the caller party number is always the extension initiated the call and not the one redirected to the Unity (second case).
I have changed the Use Last (Rather than First) Redirecting Number for Routing Incoming Call Unity parameter in the
System Settings > Advanced >Conversations -> checked and
Redirecting Diversion Header Delivery - Outbound CUCM parameter ->checked
in the SIP Trunk configuration used for the integraton of the CUCM with Unity but none of those seem to address this issue. Is there any guidelines you can give me to overcome this issue?
The servers I am using are
CUCM v9.1.2 BE
CUC v9.1.2 BE
Thank You in Advance

Hello again,
The Voice Mail Box Mask was blank before. However I tried XXXX (I use 4-digit extension for the VM pilot) but this did not seem to fix anything to the system....Same situation as before. Any more suggestions?
Thank you

Why does my mouse keep losing connection every minute

why does my mouse keep losing connection every minute, its not the batteries

I'm having the same issue. Every so often it loses connection then re establishes. This goes on repeatedly.
If you change batteries while the computer is still active then it takes for ever to re connect.
Can't wait until someone replies to your question.

How to take voltage measurements every minute

Hi all,
I am currently new to labview and i am trying to take timed voltage measurements. Here is what i am trying to do;
I am using labview 2010 and I am trying to take temperature and humidity readings in sync with each other. To measure the temperature i am using a cDaq and mudule 9213, for humiduty i am using the voltage from module 9234 and converting it using the ambient temperature and voltage from my humidity sensor.
Now what i want to do is take voltage and temperature measurements say every minute or 30 seconds, but my buffer fills from the voltage readings and gives me an error or the table takes values from what im assuming is the buffer, one by one, instead of grabbing the current data from the module.
My real question here is how do i take current voltage measurements every 30 seconds?
Thank you for any advice.
Solved!
Go to Solution.

Did you stop your VI when changing voltages? It would make since if you did since the chart will retain its memory while the table's Express VI is reset with each run.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

IPhone5 with ios 6.1.2 uses cellular data when connected to wifi. Every hour to the minute even when no apps are running, iCloud is off, Ads are off, Diagnostics are off. Running on AT&T cellular network.

I have 3 iPhone5's with ios 6.1.2 that user cellular data when connected to wifi. Every hour to the minute even when no apps are running, iCloud is off, Ads are off, Diagnostics are off. Running on AT&T cellular network.
Date Time To/From
Type
Direction
Msg/KB
03/14
01:30 PM
phone
Internet/MEdia Net
Sent
78 KB
03/14
01:02 PM
phone
Internet/MEdia Net
Sent
4397 KB
03/14
12:48 PM
phone
Internet/MEdia Net
Sent
19520 KB
03/14
12:30 PM
phone
Internet/MEdia Net
Sent
19503 KB
03/14
11:30 AM
phone
Internet/MEdia Net
Sent
2427 KB
03/14
10:30 AM
phone
Internet/MEdia Net
Sent
359 KB
03/14
09:30 AM
phone
Internet/MEdia Net
Sent
1396 KB
03/14
09:25 AM
phone
Internet/MEdia Net
Sent
1 KB
03/14
08:25 AM
phone
Internet/MEdia Net
Sent
30 KB
03/14
07:25 AM
phone
Internet/MEdia Net
Sent
16 KB
03/14
06:25 AM
phone
Internet/MEdia Net
Sent
45 KB
03/14
05:25 AM
phone
Internet/MEdia Net
Sent
15 KB
03/14
04:25 AM
phone
Internet/MEdia Net
Sent
14 KB
03/14
03:25 AM
phone
Internet/MEdia Net
Sent
21 KB
03/14
02:25 AM
phone
Internet/MEdia Net
Sent
23 KB
03/14
01:25 AM
phone
Internet/MEdia Net
Sent
16 KB
03/14
12:25 AM
phone
Internet/MEdia Net
Sent
23 KB

Hello All Who Read This!
I just bought an iPhone 5 on the 21st of March. I ate through 850 MB's in 12 days. I read up on the issue of data consumption looking for tips to conserve data. I did not know there was a problem.
This morning I found out that I was leaking data very little, but daily it accumulates. I am in Barcelona, Spain. I do not have a contract, I am on a prepaid Yoigo carrier.
I happened upon an article/blog by Robert Parks at snnyc.com "problems persist in ios 6.1.2.".
Although his situation did not relate to me, I tried a few tests on my own to see if I could stop the data leak without turning off my celular data and possibly push notifications, I think I found a solution that might help someone:
In ios 6.1.3 goto Settings/Mail, Contacts,Calenders and scroll down to Calendars and turn off " New Invitation Alerts" and also turn off "Shared Calendar Alerts".
My Cellular Network Data seems to be behaving. I only see a change in MB used when I open an ap that uses data.
All The Best

Unity connection stop take call every 25 minutes

Similar Messages

Maybe you are looking for