Unity Express 7.0.5 Adding Language

Hi,
I was following Cisco doc to add Canadian French into Unity Express 7.0.5. It went through with no errors and restarted. However, I still could not see the new added language installed. When I show software version detail, it still says global support and US English installed. Did I miss anything?
Any help would be highly appreciated.
Thanks,
Soup

Hi, Rob,
Below is the outcome of show license:
CUE# show software licenses
Installed license files:
- ivr_lic.sig : NULL IVR LICENSE
- voicemail_lic.sig : 50 MAILBOX LICENSE
- port_lic.sig : 8 PORT BASE LICENSE
Core:
- Application mode: CCME
- Total usable system ports: 24
Voicemail/Auto Attendant:
- Max system mailbox capacity time: 18000
- Default # of general delivery mailboxes: 15
- Default # of personal mailboxes: 50
- Max # of configurable mailboxes: 65
Interactive Voice Response:
- Max # of IVR sessions: Not Available
Languages:
- Max installed languages: 5
- Max enabled languages: 5
Also below is the show version:
CUE# show software versions detail
Cisco Unity Express version (7.0.5)
Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2008 by Cisco Systems, Inc.
Applications:
Name: Installer (7.0.5.0)
Desc: Installer application
   id: a0fb9f0a-fa5c-4b21-a64c-0cb9d6379573
Type: (installer)
Name: Thirdparty (7.0.5)
Desc: Service Engine Thirdparty Code
   id: a3442277-7890-4782-9e6b-9d19efc1e0d8
Type: (application)
Name: Bootloader (Primary) (2.1.14)
Desc: Service Engine Bootloader
   id: 13b08c00-19f7-4b81-97c7-f1d7fb7a8fd5
Type: (bootloader)
Name: Global (7.0.5)
Desc: Global manifest
   id: edceaf0b-a890-4045-9086-5452fac85eba
Type: (application)
Name: GPL Infrastructure (7.0.5)
Desc: Service Engine GPL Infrastructure
   id: 9f112eb1-6f58-4dd4-8faa-8530467af3b9
Type: (application)
Name: Voice Mail (7.0.5)
Desc: Voicemail application
   id: 8e7823e2-0e92-4470-8860-653246345f9d
Type: (application)
Name: Infrastructure (7.0.5)
Desc: Service Engine Infrastructure
   id: a36e1be1-ce8a-4f53-ace7-1844262aa0b9
Type: (application)
Name: Bootloader (Secondary) (2.1.14.0)
Desc: Service Engine Bootloader
   id: 9d7b26fb-21b2-416e-8b65-425c2f8da5d8
Type: (bootloader)
Name: Core (7.0.5)
Desc: Service Engine OS Core
   id: 430f25f9-0fed-48a4-b362-823937138501
Type: (application)
Name: Auto Attendant (7.0.5)
Desc: Service Engine Telephony Infrastructure
   id: e3db91b0-f47d-460c-ad22-65001a5d45a9
Type: (application)
Components:
Name: Plug-in Enablement (7.0.5)
Desc: Plug-in enablement pack
   id: 26bd663c-3e5a-43d9-a6c3-5441ce44941b
Type: (plug-in)
Name: CUE Voicemail Language Support (7.0.5)
Desc: Languages global pack
   id: e2e81cc6-39b5-47e1-9f83-b83c897fc50c
Type: (plug-in)
Name: CUE Voicemail US English (7.0.5)
Desc: English language pack
   id: 27e5e2ab-1622-4c02-8a0a-cfad0d932148
Type: (plug-in)
Please help.
Thanks,
Soup

Similar Messages

Transfer a caller directly to a Unity Express Mailbox using a prepend * character

I have a CME and CUE setup for our phone system. I experiemented setting up the feature to automatically transfer a calle directly to a CUE mailbox.
In CME
ephone-dn 128
number 32252
call-forward all 2999
In CUE
At config prompt
username JoeWho phonenumberE164 32252
This set up worked and calls/transfers using 32252 went directly to the voicemail. However, is it possible to use * as the prepend and not a number. A comment in the following article suggests that you can:
http://www.tech-recipes.com/rx/2287/callmanager_express_transfer_direct_to_unity_express_voicemail/
However, when I tried using the *, CUE objected saying that * was an invalid character.
Here is what I am running:
VicCME#sh telephony-service
CONFIG (Version=7.1)
=====================
Version 7.1
Cisco Unified Communications Manager Express
VicCUE# sh software version
Cisco Unity Express version (7.0.3)
Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2008 by Cisco Systems, Inc.
Components:
- CUE Voicemail Language Support version 7.0.3

Thank you, Rob
Yes, I was actually doing more work than required. I cloned the production template and created a new template#3 and added the trnsfvm option as follows to the softkeys line of the template. I then applied that to my phone and reset my phone as shown below (Setting up softkey for trnsfvm). The transfer to voicemail works perfectly using the softkey. However, I cannot seem to get the fac option to work. That is, suppose I want to leave a message for someone in their voicemail (not transfering an outside call to someone's voicemail). For example, I have tried many keys my config is:
telephony-service
fac custom trnsfvm * (#* or #0 or #22)
I reset my phone and when I press the fac keys, I receive an undefined # on my phone. For example, if I define the fac as #0, then I would pick up the headset hit the #0extension# keys. So, if I wanted to leave a message to extension 2148's voicemail, I would dial #02148. However, this does not work.
Was there something else that I needed to do? Do I have to create the cnf-files?
telephony-service
create cnf-files
Or, do I have to reset the CME/phone system?
I also tried "fac-standard" that sets trnsfvm to *6, but that also does not work and I also get an "Undefined" display when I try to use it.
VicCME#sh telephony-service fac
telephony-service fac standard
    callfwd all **1
    callfwd cancel **2
    pickup local **3
    pickup group **4
    pickup direct **5
    park **6
    dnd **7
    redial **8
    voicemail **9
    ephone-hunt join *3
    ephone-hunt cancel #3
    ephone-hunt hlog *4
    ephone-hunt hlog-phone *5
    trnsfvm *6
    dpark-retrieval *0
VicCME#
Setting up the softkey for Trnsfvm.
phone-template 3
conference drop-mode local
conference add-mode creator
conference admin
softkeys hold Resume Newcall
softkeys idle Redial Newcall Cfwdall Dnd
softkeys seized Redial Endcall Meetme
softkeys alerting Endcall
softkeys connected Hold Trnsfer Endcall Trnsfvm LiveRcd Confrn ConfList
softkeys ringing Answer Dnd
ephone 28
ephone-template 3

Unity express 8.6.6 software install errror

Hi all
I have remove the software form cisco unity after that I go to cisco website and download unity express 8.6.6.software and language package as per unity model
ISM-SRE-300-K9
and prepare freeftp server when I start to transfer the file I get error like the following :
router#service-module isM 0/0 install url ftp://cisco:[email protected]/cue-vm-k9.SPA.sme.8.6.6.pkg
Proceed with installation? [no]: yes
%Error: Couldn't open ftp://*****:*****@66.3.143.65/cue-vm-k9.SPA.sme.8.6.6.pkg.install.sre
Execution of script cue-vm-k9.SPA.sme.8.6.6.pkg.install.sre failed, installation aborted
i want to know where is the problem in the tftp server or the way of installation
please help me

Hi yahsiel
i have still get error i want to know where the issue from install way or from TFTP server
thanks

Cisco Unity Express 8.6.6 Voice Mail not deleting when e-mail with attachment deleted

I have a Cisco Unity Communications Manager rel 9.1.2 that supports a remote location with a Unity Express rel 8.6.6 voice mail service module in the voice gateway to insure if WAN goes down the location still has voice mail. We have Voice Mail to E-Mail working. The problem is that when the e-mail with the voice mail is deleted the message stays in the Unity Express Voice Mail Box. All of our local users on the same Call Manager Cluster using a local Unity Connection Cluster rel 9.1.2 have the voicemails deleted when the e-mail is deleted.
How can I resolve this issue?

Found another post that referenced Cisco Bug ID CSCti37610.
CUC plays message is from Unity Connection Messaging system
Symptom:Before message playback, Unity Connection plays the message is from Unity Connection Messaging System instead sender's ANI
Conditions:Problem was observed on Unity Connection cluster and appropriate services are not rebooted after changing the SMTP domain name
Workaround:
Restart the Unity Connection servers
It should have been fixed in 8.5 but we did change the SMTP domain name on 8.6 and now see the problem. Will schedule a reboot and see if the issue goes away.

Unity Express - Incoming calls wont get voice mail

CUE works fine with telephones on my local network. Incoming and outgoing calls work fine.
However when I get an incoming call via SIP trunk the call will not get forwarded to unity express after 10 seconds. The line goes dead.
I searched for another post which suggested the following commands:
telephony-service
call-forward pattern .T
voice service voip
allow connections from h323 to sip
I've double checked them and there's still something wrong.
Here's my current configuration:
voice service voip
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
supplementary-service h450.12
h323
voice class codec 1
codec preference 1 g711ulaw
codec preference 2 g711alaw
telephony-service
load 7910 P00403020214
load 7960-7940 P00305000301
max-ephones 24
max-dn 24
ip source-address 192.168.20.1 port 2000
auto assign 1 to 24
system message Comtek
voicemail 3000
max-conferences 8 gain -6
call-forward pattern .T
moh music-on-hold.au
time-webedit
transfer-system full-consult
transfer-pattern 2...
transfer-pattern 3...
directory last-name-first
directory entry 2 2001 name Phone Two 7912
directory entry 3 2000 name Phone One 7970
ephone-dn 1 dual-line
number 2000 secondary 441833000000
call-forward busy 3000
call-forward noan 3000 timeout 10
no huntstop
ephone 1
no multicast-moh
device-security-mode none
mac-address 0017.0EF0.3642
type 7970
button 1:1
So pros, any suggestions?
Thanks

I made a new dial-peer to handle incoming calls as follows.
dial-peer voice 1000 voip
description Incoming SIP
translation-profile incoming SIPin
voice-class codec 1
session protocol sipv2
incoming called-number .T
dtmf-relay rtp-nte
no vad
The translation-profile puts the call through to my 2000 extension.
This is my "show call active voice brief" when an external incoming call is ringing through to my 2000 ephone-dn.
To me this seems to show the dial-peer "1000" matching and using the g711ulaw codec
Telephony call-legs: 1
SIP call-legs: 1
H323 call-legs: 0
Call agent controlled call-legs: 0
SCCP call-legs: 0
Multicast call-legs: 0
Total call-legs: 2
1715 : 552 596706500ms.1 +-1 pid:1000 Answer +441833696807 connecting
dur 00:00:00 tx:0/0 rx:0/0
IP 87.127.240.98:16188 SRTP: off rtt:0ms pl:0/0ms lost:0/0/0 delay:0/0/0ms g711ulaw TextRelay: off
media inactive detected:n media contrl rcvd:n/a timestamp:n/a
long duration call detected:n long duration call duration:n/a timestamp:n/a
1715 : 553 596706510ms.1 +-1 pid:20001 Originate 2000 connecting
dur 00:00:00 tx:0/0 rx:0/0
Tele 50/0/1 (553) [50/0/1.0] tx:0/0/0ms None noise:0 acom:0 i/0:0/0 dBm
Telephony call-legs: 1
SIP call-legs: 1
H323 call-legs: 0
Call agent controlled call-legs: 0
SCCP call-legs: 0
Multicast call-legs: 0
Total call-legs: 2
This is the "show call active voice brief" for an external incoming call when the call is established.
Telephony call-legs: 1
SIP call-legs: 1
H323 call-legs: 0
Call agent controlled call-legs: 0
SCCP call-legs: 0
Multicast call-legs: 0
Total call-legs: 2
1731 : 569 597220040ms.1 +3730 pid:1000 Answer +441833696807 active
dur 00:00:02 tx:105/16800 rx:104/16640
IP 87.127.240.98:15162 SRTP: off rtt:0ms pl:0/0ms lost:0/0/0 delay:0/0/0ms g711ulaw TextRelay: off
media inactive detected:n media contrl rcvd:n/a timestamp:n/a
long duration call detected:n long duration call duration:n/a timestamp:n/a
1731 : 570 597220060ms.1 +3700 pid:20001 Originate 2000 active
dur 00:00:02 tx:0/0 rx:105/16800
Tele 50/0/1 (570) [50/0/1.0] tx:16180/16180/0ms g711ulaw noise:0 acom:0 i/0:0/0 dBm
Telephony call-legs: 1
SIP call-legs: 1
H323 call-legs: 0
Call agent controlled call-legs: 0
SCCP call-legs: 0
Multicast call-legs: 0
Total call-legs: 2
Not too sure where to go from here.

Unity Express: More than one phone / DN with a voice mail box

I'm running Unity Express 8.0.2.
Is there a way to associate two extensions on separate phones, with one voicemail box?

Hi
From memory, you can add the second extension number as the "Primary E.164 number" on the user associated with the voicemail box.
That way both phones should be associated with the same VM box.
HTH. Barry

Unable to create a notification for a group (Cisco Unity Express 3.2)

There is Cisco ISR 2821 with CME 7.1 and Cisco Unity Express 3.2.
I am trying to create notifications for a group named AAA in CUE.
I do following (GUI):
1. Go to Configure -> Groups
2. Click on the group name AAA.
3. In Group Profile window 'Enable notification for this user/group' option is enabled.
4. Go to Mailbox tab. There is an associated mailbox with ticks against Enabled and Fax Enabled.
5. Go to Notification tab and see the warning:
No Notification Devices found for User/Group
Also, there are another several groups on this system and I am able to turn notification on for them. These groups have the same owners and members that AAA has. Moreover, if I create a new group and set it up absolutely the same as AAA, I can turn notifications on for it.
The problem in this way is that we have our custom greetings and after I created a new group, for example BBB, with the same settings (as AAA, inluding Primary Extansion and Primary E.164 Number) and remove these numbers from AAA, then it works and users would receive notification about new voice messages. BUT, when I call BBB I listen to standart Cisco greeting promts.
I don't undestand why it happens, because all these greetings are determined in Voicemail -> Auto Attendant section and I did not any changes here at all.
How can I fix this 'notification' problem?
Thanks.

Process with success:
unzip the packet in: C:\APEX
1. Install:
@apexins SYSAUX SYSAUX TEMP /i/
2. Change to password:
@apxchpwd,
3. Run apex_epg_config.sql
On windows:
@apex_epg_config.sql (page 30, the guide of intallation)
Important:Replace SYSTEM_DRIVE:\TEMP by C:
E.g.: @apex_epg_config C:
After this, follow the next steps
4. ALTER USER ANONYMOUS ACCOUNT UNLOCK;
Finish! Just execute apxldimg.sql script if you is upgrading from a preview release.
Now try the connect on the browser IE6 o later:
http://localhost:8080/apex/apex_admin
Then create your workspace.
Edited by: [email protected] on 10/03/2009 11:59

Toll fraud traffic pumping on a Call manager express and unity express with an 800 toll free number.

I have a customer with a call manager express and a unity express. They have an 800 toll free number that rings in to an auto attendant on the CUE. The problem is something called toll fraud traffic pumping. The caller, always from a different number, reaches the auto attendant by dialing the 800 number. They then somehow manage to keep the line connected for up to 12 hours by somehow staying in the auto attendant. I opened a TAC case and was informed that it is not in Cisco's hands to create a way to disconnect a call that is connected to the CUE. I need a way to have a call that stays in the auto attendant or voicemail after 3 to 5 minutes. I can't see a way to do it in the auto attendant script. Can someone help with a method that will disconnect the caller if they stay in the CUE for a period of time?

Thank you for the response Jaime.
That is what TAC told me. I am not familiar with TCL scripting and I have been looking at some guides on it. Any advice on a source to go to for assistance with that, possibly someone to help?

Problem with the Unity express Script

Hi
I have created a script in Unity Express . one of the option is redirecting the call to one international number .but when user press the option it says number is incorrect .
Can some one pls suggest what could be the issue.
> when dialing the same nunber from the phone it works fine .
>Thanks

Hi Kailash,
Did you try appending country code before the phone number in redirect step?
Do you have appropriate dial-peer on CME?
You have mentioned that, calling that international number from phone directly works. From which phone you are dialing that number? I mean is that phone also registered to same CME?
Thanks,
Bhavya

SCCP is not supported on Cisco unity express?

Hey,
I was reading some integration (with CME or CUCM) articles on interweb and somehow I got this impression that SCCP is not supported or working well on CUE... MWI will be using SIP if CUE and CME are integrated, what about CUCM?
I checked SCCP Compatibility matrix and there is no information of CUE...
So I am here asking this questions: SCCP is not supported on unity express?
Thanks,
Shuai

Jaime (+5)
CallManager for Cisco Unity Express Configuration Example
http://www.cisco.com/en/US/products/sw/voicesw/ps5520/products_configuration_example09186a0080289ef0.shtml
HTH
Jorge Armijo
Please remember to rate helpful responses and identify helpful or correct answers.
Jorge Armijo
Please remember to rate helpful responses and identify helpful or correct answers.

How can I create a call menu on Unity Express?

Hi everyone...
Is anybody know where can I find a tech note for a menu answering option in Unity Express.
thanks

Hello Juan
please refer to this link, let me know if this help
call-flow section and scrpting through achieve this
http://www.cisco.com/en/US/products/sw/voicesw/ps5520/products_tech_note09186a008041d950.shtml
Br,
Nadeem
Please rate all useful post.

Management for Callmanager express and Unity express

I will have the first Callmanager express and Unity express in our company soon. I want to get a typical configuration for the router; especially SNMP traps and Loggin statements
Thanks

For more information on the topic kindly follow the url ,
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_implementation_design_guide_chapter09186a00806e8c5c.html

Unity Express 8.6 custom script not working properly

Hello!
I'm having an issue with a custom auto-attendant script for Unity Express 8.6.6.
A brief overview of the expected call flow:
Call comes to 2600, which is set to forward to 2699 if busy or no answer.
Call to 2699 is sent to CUE, which is set to answer with the auto-attendant script.
Script does a time-and-day check to determine if the site is within business hours.
If within business hours, a prompt stating line is currently busy, please leave a message is played, and call is forwarded to 2601.
If outside business hours, a prompt stating office is closed is played, and call is forwarded to 2601.
Calls to 2601 are all forwarded to voicemail.
My first version had a Business Hours object, with a schedule parameter set so that the schedule could be chosen in the CUE GUI. This script did not appear to work properly, as the AfterHours option was always selected by the script. My current version removed this object and replaced it with manual Time-and-Day objects, but the same behavior as above occurs – the AfterHours option is always selected.
Both scripts validated in the editor, and the CUE has been rebooted since the script was first uploaded. TAC validated that nothing in the "show run" is causing CUE to ignore the time-and-day checks. I've attached a ZIP file that contains the scripts, "show software version" and "show license status application" output.
Am I missing anything?

I read through the document, and it says that the atrace.log file that is generated is not cleartext. Is there any application I can use to read the traces I generate?
EDIT: Apologies, it appears this documentation needs to be rewritten. I was looking at the process to enable traces on an AIM module, when our Unity Express module is on an Internal Services Module 300. I issued "show trace buffer trail" and placed a test call, and this is what I see:
3700 05/25 14:26:12.254 ACCN APMG 0 EXECUTING_STEP:Executing a step: Application=App[name=autoattendant,type=Cisco Script Application,id=1,desc=autoattendant,enabled=true,max=2,valid=true,cfg=[ApplicationConfig[,name=autoattendant,id=1,type=Cisco Script Application.description=autoattendant,enabled=true,sessions=2,script=SCRIPT[aa_vtgnwd.aef],access=0,privilege=1,script=SCRIPT[aa_vtgnwd.aef]]]],Task id=19000000034,Step id=188,Step Class=com.cisco.wfframework.steps.core.StepComment,Step Description= /* Open/Closed check */
3700 05/25 14:26:12.255 ACCN ENGN 0 Execute step of Task 19000000034 : /* Open/Closed check */
3700 05/25 14:26:12.255 ACCN APMG 0 EXECUTING_STEP:Executing a step: Application=App[name=autoattendant,type=Cisco Script Application,id=1,desc=autoattendant,enabled=true,max=2,valid=true,cfg=[ApplicationConfig[,name=autoattendant,id=1,type=Cisco Script Application.description=autoattendant,enabled=true,sessions=2,script=SCRIPT[aa_vtgnwd.aef],access=0,privilege=1,script=SCRIPT[aa_vtgnwd.aef]]]],Task id=19000000034,Step id=261,Step Class=com.cisco.wf.steps.ivr.DayOfWeekStep,Step Description=Day of Week
3700 05/25 14:26:12.255 ACCN ENGN 0 Execute step of Task 19000000034 : Day of Week
3700 05/25 14:26:12.255 ACCN APMG 0 EXECUTING_STEP:Executing a step: Application=App[name=autoattendant,type=Cisco Script Application,id=1,desc=autoattendant,enabled=true,max=2,valid=true,cfg=[ApplicationConfig[,name=autoattendant,id=1,type=Cisco Script Application.description=autoattendant,enabled=true,sessions=2,script=SCRIPT[aa_vtgnwd.aef],access=0,privilege=1,script=SCRIPT[aa_vtgnwd.aef]]]],Task id=19000000034,Step id=275,Step Class=com.cisco.wfframework.steps.core.StepGoto,Step Description=Goto AfterHours
3700 05/25 14:26:12.255 ACCN ENGN 0 Execute step of Task 19000000034 : Goto AfterHours
3700 05/25 14:26:12.256 ACCN APMG 0 EXECUTING_STEP:Executing a step: Application=App[name=autoattendant,type=Cisco Script Application,id=1,desc=autoattendant,enabled=true,max=2,valid=true,cfg=[ApplicationConfig[,name=autoattendant,id=1,type=Cisco Script Application.description=autoattendant,enabled=true,sessions=2,script=SCRIPT[aa_vtgnwd.aef],access=0,privilege=1,script=SCRIPT[aa_vtgnwd.aef]]]],Task id=19000000034,Step id=37,Step Class=com.cisco.wfframework.steps.core.StepLabel,Step Description=AfterHours:
3700 05/25 14:26:12.256 ACCN ENGN 0 Execute step of Task 19000000034 : AfterHours:
3700 05/25 14:26:12.256 ACCN APMG 0 EXECUTING_STEP:Executing a step: Application=App[name=autoattendant,type=Cisco Script Application,id=1,desc=autoattendant,enabled=true,max=2,valid=true,cfg=[ApplicationConfig[,name=autoattendant,id=1,type=Cisco Script Application.description=autoattendant,enabled=true,sessions=2,script=SCRIPT[aa_vtgnwd.aef],access=0,privilege=1,script=SCRIPT[aa_vtgnwd.aef]]]],Task id=19000000034,Step id=228,Step Class=com.cisco.wfframework.steps.core.StepComment,Step Description= /* Play VTG_Closed prompt ... */
3700 05/25 14:26:12.256 ACCN ENGN 0 Execute step of Task 19000000034 : /* Play VTG_Closed prompt ... */
3700 05/25 14:26:12.256 ACCN APMG 0 EXECUTING_STEP:Executing a step: Application=App[name=autoattendant,type=Cisco Script Application,id=1,desc=autoattendant,enabled=true,max=2,valid=true,cfg=[ApplicationConfig[,name=autoattendant,id=1,type=Cisco Script Application.description=autoattendant,enabled=true,sessions=2,script=SCRIPT[aa_vtgnwd.aef],access=0,privilege=1,script=SCRIPT[aa_vtgnwd.aef]]]],Task id=19000000034,Step id=214,Step Class=com.cisco.wf.steps.ivr.OutputStep,Step Description=Play Prompt (--Triggering Contact--, pAfterHours)
3700 05/25 14:26:12.256 ACCN ENGN 0 Execute step of Task 19000000034 : Play Prompt (--Triggering Contact--, pAfterHours)
It appears as though the script engine is seeing the Day of Week object, acknowledging it without somehow doing anything with it, and then choosing a "goto AfterHours" step within that object and playing that prompt, which is consistent with the behavior we're seeing.
Any thoughts?

Bussines Hours shedule in unity express does not work properly

Hi,
End user has a unity express 8.0.5 version. I created an script with Editor Express where I defined a Bussines Hours Shedule.
I have noticed that sometimes the main menu prompts is played eventhough is not a working hours.Other times Bussiness Closed promts is played correctly but after it the main menu prompt is played (I expected to finish the script when the Bussiness Closed prompt is played).
I have checked several times but the problems remains, I do not know why. I attach the screen shot of script.
regards

You can ask advice at this forum.
*http://stackoverflow.com/questions/
It looks that the code that calculates the menu width and position isn't triggered unless you resize the window (changing the width 1px by dragging the border or zooming the page works), so the menu flyout still has the default setting.
I see:
<pre><nowiki><ul style="width: 51px; left: 1100px; display: none;" class="sub-container flmenu">
</nowiki></pre>
After a resize this changes to:
<pre><nowiki><ul style="width: 898px; left: 252px; display: none;" class="sub-container flmenu">
</nowiki></pre>
I don't know how this onresize event ($(window).on('resize', function()) would have to be triggered to initialize the menu properly.

Queries about Cisco Unity Express

Hi
I have a CME & CUE 8.x . site is recently installed . i noticed that users in Unity Express have not showing with the phone (Mac address )
> is it OK to not add the Mac address ... will VM work for the users .
> I also tried to add the phone but it says " I Thinki it is not properly communicating with the CME .
No unassociated phones found on the call agent.
Please suggest ..
KS

Have you already reviewed the CME and CUE configuration guide available on CCO??
Pretty easy to find.
CUE does not require MACs, that's CME.
HTH
java
if this helps, please rate
www.cisco.com/go/pdihelpdesk

Unity Express 7.0.5 Adding Language

Similar Messages

Maybe you are looking for