Unity Express 7.4.1 and CUCM 8.5.1

Hi,
I looked in Compatibility Matrix for Unity Express and found that Unity Express 7.4.1 and Callmanager 8.5.1 wll work together.
Now I upgraded Unity Express to version 7.4.1. I read the CTI-ports via Unity Web GUI from CUCM and it found right the ports.
But in CUCM the ports doesnt register with unity express.
What could I do to register the ports? The jtapi user already associated with the ports and I also reset the password t both systems.
Is there a trace I could switch on for port registration?

meanwhile i found why not register, at the CTI are securty profile configured. after remove it, the ports register but still doesnt work:
A debug at the CLI of CUE show following if someone call the Routepoint with DN 9002:
Jan 10 10:19:09 localhost java:    INFO ccn SubsystemJtapi DBUG CTIPG_ROUTE_EVENT:CTI Port Group route event: Route Session=[9002:PT_Alle:1/(P1-unity) GCID=(1,7648)->ACTIVE]->OFFERED,Route Address=9002,Failure reason=Terminate Route Connection,Exception=com.cisco.channel.ChannelLicenseViolationException: license limit
Jan 10 10:19:09 localhost java:    INFO ccn SubsystemJtapi DBUG EXCEPTION:com.cisco.channel.ChannelLicenseViolationException: license limit exceeded for application type: AAWorkflowPrivilege
Jan 10 10:19:09 localhost java:    INFO ccn SubsystemJtapi DBUG EXCEPTION:      at com.cisco.contact.impl.ContactStubImpl.addChannels(ContactStubImpl.java:1667)
Jan 10 10:19:09 localhost java:    INFO ccn SubsystemJtapi DBUG EXCEPTION:      at com.cisco.channel.impl.ChannelManagerImpl.getFromDifferentClassGroups(ChannelManagerImpl.java:950)
Jan 10 10:19:09 localhost java:    INFO ccn SubsystemJtapi DBUG EXCEPTION:      at com.cisco.channel.impl.ChannelManagerImpl.getIdleChannels(ChannelManagerImpl.java:686)
Jan 10 10:19:09 localhost java:    INFO ccn SubsystemJtapi DBUG EXCEPTION:      at com.cisco.channel.Group.getIdleChannels(Group.java:305)
Jan 10 10:19:09 localhost java:    INFO ccn SubsystemJtapi DBUG EXCEPTION:      at com.cisco.wf.subsystems.jtapi.TAPIPortGroup$RouteCallObserver$1.run(TAPIPortGroup.java:17573)
Jan 10 10:19:09 localhost java:    INFO ccn SubsystemJtapi DBUG EXCEPTION:      at com.cisco.executor.impl.ParallelExecutorImpl$WorkOrder.run(ParallelExecutorImpl.java:283)
Jan 10 10:19:09 localhost java:    INFO ccn SubsystemJtapi DBUG EXCEPTION:      at com.cisco.executor.impl.WorkerPool$Worker.run(WorkerPool.java:398)
Jan 10 10:19:09 localhost java:    INFO ccn SubsystemJtapi DBUG EXCEPTION:      at java.lang.Thread.run(Thread.java:595)
Anybody knows what this license violence means? The licenses are valid and activ.

Similar Messages

Cisco Unity Express (NME-CUE) Compatibility for CUCM 9.1.2

I unable to find latest Compatibility matrix for Cisco Unity Express (NME-CUE) module for integrating with CUCM 9.1.2
The URL: http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/unity_exp/compatibility/cuecomp.html is updated with CUCM 9.0 only.
Request to share Compatibility matrix or suggest Hardware and software for my below requirement.
I am running NME-CUE 7.0.6 on 2951 ISR2 with IOS version 15.2(4)M5 and integrated with CUCM 7.1.5 using SCCP.
I am upgrading my CUCM to 9.1.2 and need suggestion on upgrading the CUE.
Also need details on Licensing for approx 100 Mailbox and 25 Voice Ports (No need of IVR Ports).
Thanks,
Chandan

Hi Chandan,
CUE 8.6.6 and later are compatible with CUCM 9.1.x;
Support for Cisco Unified Communications Manager 9.1
Cisco Unity Express 8.6.6 provides support for Cisco Unified Communications Manager 9.1.
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/unity_exp/rel8_6/rel_notes/rel_notes86.html#pgfId-411381
Because you are moving from a pre-7.1 CUE version you will need to follow the CSL License migration process;
NoteWhen you upgrade to Cisco Unity Express Release 8.6.x from any release prior to Cisco Unity Express Release 7.1, you must replace your pre-CSL licenses with CSL licenses. You must migrate your licenses for the mailbox features and port features. If you have purchased the optional IVR features, you should also migrate your licenses for the IVR features.
Software Activation for Cisco Unity Express 7.1 and Later Versions
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/unity_exp/rel7_1/Licensing/CUELicensing_book.html
Cheers!
Rob

Can not foward into voicemail from outside call on CUE and CUCM 8.6

Dear Team,
I have CUE Utility and CUCM 8.6.
I can call from local, if user busy or go out office then call will foward to voice mail.It is ok.
But when i call from outside to my phone(direct line), then call can not foward to voice mail on CUE.
Please help me some solution.
Thanks.

Hi nam,
A couple of things to check. Have you set the Forward Busy/No Answer "External"
on the DN config page in CUCM?
Are the calls coming in using a codec other than g.711?
Best Practices for Deploying Cisco Unity Express
• Each mailbox can be associated with a primary extension number and a primary E.164 number.
Typically, this number is the direct-inward-dial (DID) number that PSTN callers use. If the primary
E.164 number is configured to any other number, use Cisco IOS translation patterns to match either
the primary extension number or primary E.164 number so that the correct mailbox can be reached
during SRST mode.
• Each Cisco Unity Express site must be associated with a CTI route point for voicemail and one for
AA (if licensed and purchased), and you must configure the same number of CTI route points as
Cisco Unity Express ports licensed. Ensure that the number of sites with Cisco Unity Express does
not exceed the CTI scalability guidelines presented in the chapter on Call Processing, page 8-1.
• Cisco Unity Express is associated with a JTAPI user on Cisco Unified CallManager. Although a
single JTAPI user can be associated with multiple Cisco Unity Expresses in a system, Cisco
recommends associating each dedicated JTAPI user in Cisco Unified CallManager with a single
Cisco Unity Express.
• Calls into Cisco Unity Express use G.711 only. Cisco recommends using a local transcoder to
convert the G.729 calls traversing the WAN into G.711 calls. You can configure Cisco Unified
CallManager regions with the G.711 voice codec for intra-region calls and the G.729 voice codec
for inter-region calls.
• If transcoding facilities are not available at the Cisco Unity Express site, provision enough
bandwidth for the required number of G.711 voicemail calls over the WAN. Configure the Cisco
Unified CallManager regions with the G.711 voice codec for calls between the IP phones and Cisco
Unity Express devices (CTI ports and CTI route points).
• The CTI ports and CTI route points can be defined in specific locations. Cisco recommends using
location-based call admission control between Cisco Unified CallManager and Cisco Unity Express.
RSVP may also be used.
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/4x/42unityx.pdf
Cheers!
Rob
"Far away from your trouble and worry
You belong somewhere you feel free" - Tom Petty

Is there a way to script finding users in Unity and CUCM

I currently get a list once a month of all users who no longer work for our company. As we roll out more VOIP installs the list grows and the old way of doing things needs to change. Currently I search one by one through CUCM and Unity to see if the user is assigned a phone. I would like to be able to pull a list of all users from both Unity and CUCM put that into a spread sheet and then compare my attrition spread sheet to that spread sheet therby speeding up the process of determining which users might be assigned a phone.
Note company hires warehouse workers and they come and go frequently and are not assigned phones but, they along with users with phones are all dumped into a spread sheet so I have no way of know who is who.
1. I have a spread sheet with names on it both people with and without phones
2. I would like to download a list so I can compare the two and determine which ones have phones
I am open to other ideas and suggestions to make the laborious task easier.
Thank You in advance

Seems easy enough on the face of it - unless there's something I'm not getting - are you talking Unity or Unity Connection (folks often just say "Unity" as shorthand for either) - if you're dealing with Unity then you'll have to dance with ODBC which isnt' the end of the world but doing it from "script" is going to be a challange. If you're talking about Unity Connection you can also use ODBC but you have the option for an HTTP REST search for users by name.
So it's just a matter of searching by name and getting matches back (names are not guranteed to be unique of course, assuming you mean name as first/last/display name and not alias). It can kick out all matches I suppose and include the extension number. Unity and Unity connecton _always_ have extension numbers (it's required) so I'm unsure what someone "without a phone" would look like in Unity/Connection - that's a bit odd - how do they check messages? And without a phone why do they have a voice mail account?

Toll fraud traffic pumping on a Call manager express and unity express with an 800 toll free number.

I have a customer with a call manager express and a unity express. They have an 800 toll free number that rings in to an auto attendant on the CUE. The problem is something called toll fraud traffic pumping. The caller, always from a different number, reaches the auto attendant by dialing the 800 number. They then somehow manage to keep the line connected for up to 12 hours by somehow staying in the auto attendant. I opened a TAC case and was informed that it is not in Cisco's hands to create a way to disconnect a call that is connected to the CUE. I need a way to have a call that stays in the auto attendant or voicemail after 3 to 5 minutes. I can't see a way to do it in the auto attendant script. Can someone help with a method that will disconnect the caller if they stay in the CUE for a period of time?

Thank you for the response Jaime.
That is what TAC told me. I am not familiar with TCL scripting and I have been looking at some guides on it. Any advice on a source to go to for assistance with that, possibly someone to help?

Management for Callmanager express and Unity express

I will have the first Callmanager express and Unity express in our company soon. I want to get a typical configuration for the router; especially SNMP traps and Loggin statements
Thanks

For more information on the topic kindly follow the url ,
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_implementation_design_guide_chapter09186a00806e8c5c.html

Cisco Unity Express and Default L-FL-CUE-PORT-2= Amounts

OK, curiosity question:
The various SM-SRE modules, when installed with Cisco Unity Express, are supposed to have a default number of ports available. For example, the ISM-SRE-300-K9 module is supposed to have two ports on it by default when installed with Cisco Unity Express.
When we order these modules from Cisco, they come pre-installed with CUE and the correct number of ports (default + purchased ports). However, when we order from distribution, i.e. Tech Data, Ingram et. al., the modules come in blank whereupon we have to install CUE (no concerns here, it's easy-peasy), and then go through the hassle of contacting licensing to activate the two default ports. Every time I call in to do this I have a different experience.
Does anyone know of a better, quicker, simpler way to activate these default ports? No offense to licensing, but I could save a lot of time and brain cells if there was a way for me to activate them on my own.
Thanks in advance for any assistance,
Kevin

When you order from Disti, do they give you a PAK code? If yes, you should be able to activate it online:
https://tools.cisco.com/SWIFT/LicensingUI/Quickstart
Please remember to rate helpful responses and identify helpful or correct answers.

SCCP is not supported on Cisco unity express?

Hey,
I was reading some integration (with CME or CUCM) articles on interweb and somehow I got this impression that SCCP is not supported or working well on CUE... MWI will be using SIP if CUE and CME are integrated, what about CUCM?
I checked SCCP Compatibility matrix and there is no information of CUE...
So I am here asking this questions: SCCP is not supported on unity express?
Thanks,
Shuai

Jaime (+5)
CallManager for Cisco Unity Express Configuration Example
http://www.cisco.com/en/US/products/sw/voicesw/ps5520/products_configuration_example09186a0080289ef0.shtml
HTH
Jorge Armijo
Please remember to rate helpful responses and identify helpful or correct answers.
Jorge Armijo
Please remember to rate helpful responses and identify helpful or correct answers.

Cucme and cucm with aim-cue

Hi all, I just want to know if AIM-CUE can work with cucme and cucm 8.0?
Because based on this matrix Cisco Unity Express Compatibility Matrix [Cisco Unity Express] - Cisco Systems
It says that it is supported, but CUE (AIM-CUE Module) should have a version of 7.2 or 7.3 to support cucme 8.x and cucm 8.x
Can anyone confirm this because aim-cue is the cheapest among the CUE cisco offers. Thanks!

That's what I read, having cue 7.2 or 7.3 will let you use cucme/cucm 8.x
When you say "there will not be any new firmware release on the old aim-cue", Does that mean that cue version 7.3 will be the last firmware version to be released on the old aim-cue that will support cucme/cucm 8.x? Future versions of cucme/cucm (version 9) will not be supported by the old aim-cue?

Unity Express 1.1.1 AutoAttendant

Has anyone messed around with autoattendant scripts for Unity Express?
I have a customer who would like the autoattendant to function as follows:
"Hi you have reached acme company, if you know your parties extension please enter it at any time. to reach department X please press 1. To dial by name please press 2."
The part that im am having trouble with is dialing the extension at any time.
Any ideas?
Thanks
Frank

HI Suresh,
Thanks for reply,
1)i have create the one CTI route point in CUCM, add one dn no:8000 and check the forward all checkbox.
2) I have upload the greeting through System----> Prompts
3) Create one Script(aascript.aef), System---Script--map to .wav greeting
4) Go to Voice mail option--Voice mail--- Click on -autoattedant--add to call-in no:8000 and script.--Save.
but i am dailing 8000, it says---there is no mail box is creating this number.
please help on this any configuration are missing.
thanks & regards,
Johnson.

Unity Express VoiceView

Hi,
I have Unity Express 8.0.5 integrated with CUCM 8.0.3.21900-8
Everything is working ok with the exception of VoiceView Express.
I can login ok and browse the menus but when I try to listen to or record a message I get the following on the phone screen:
Report this error to your system administrator. IOException: Connection refused
I am pretty sure the JTAPI srtup is ok although I could not find anything that goes through the setup in detail.
Any ideas what I need to check?

If it ever gets beyond configuration, this is what TAC will ask for...
1.
       Make sure the system is otherwise idle.
2.    Enable “trace voiceview all”, “trace voiceview-ccn all”.
3.    Run "clear trace" on CUE.
Run "sh trace buffer tail" on CUE.
Make the simplest call to demonstrate your problem.
Wait until the logs stop scrolling ... Might take 3 to 5 minutes.
Press CTRL-C to exit.
Send the logs.

How to record AutoAttendant Unity Express 8.6

Hi,
I was wondering how to record an AutoAttendant message in Unity Express 8.6? I would rather call into the system to do it rather than create a .wav file and upload it.
I think there is a way to call in and record it but I sure have not found out how. I was reading about the AvT system but not sure how to use that either.

HI Suresh,
Thanks for reply,
1)i have create the one CTI route point in CUCM, add one dn no:8000 and check the forward all checkbox.
2) I have upload the greeting through System----> Prompts
3) Create one Script(aascript.aef), System---Script--map to .wav greeting
4) Go to Voice mail option--Voice mail--- Click on -autoattedant--add to call-in no:8000 and script.--Save.
but i am dailing 8000, it says---there is no mail box is creating this number.
please help on this any configuration are missing.
thanks & regards,
Johnson.

Cisco Unity Express requirement (license,package files,application)

Hi everyone,
I am about to install CUE on my c2911 router and I am confused with the license needed. Currently I have these license:
1.     SL-29-UC-K9           : Unified Communication License
2.     FL-CUE-MBX-5        : Unity Express License - 5 Mailbox -CUCM and CUCME
3.     FL-CUE-PORT-2      : Unity Express License - Non Re-hostable-2 Port
4.     VWIC2-1MFT-T1/E1 : 1-Port 2nd Gen Multiflex Trunk Voice/Wan Int. Card - T1/E1
Is there any license/package files/application that I need in order to get this service running?
Regards.

This should help:
http://www.cisco.com/en/US/docs/voice_ip_comm/unity_exp/rel7_1/Licensing/Using_CSL.html
Chris

Cisco unity express strange behavior

Dear exprerts, i uploaded my customized audio files in "aa.aef" script for greeting in unity express but when i dial my IVR extension "7980" its plays my customized audio files and after that the default audio file also like first "my customized audio file" than " if you know your desire extension.....etc " this is what undesirable happens i dont want this default audio file to run i only want my customized audio files to be played............ any help will really be appreciated...
Regards
Salman

Hi Mark,
**EDIT - +5 to Francisco for his good tips!
If you are using CME and the DN isn't the Primary Line on the phone (have a look at this command - note this is only set on the call control system CME, not on CUE itself);
mwi-line
To designate a line other than the primary line of an ephone to be associated with the ephone's message waiting indicator (MWI) lamp, use the mwi-line command in ephone configuration mode. To return to the default, use the no form of this command.
mwi-line line-number
no mwi-line
Syntax Description
line-number
Line number to be associated with the MWI lamp. Range is from 1 to 34.
Command Default
A phone's MWI lamp is lit only when there is a message waiting for the phone's primary line (line 1).
From this good doc;
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/command/reference/cme_m1ht.html#wp1013830
Cheers!
Rob

Two unity express with call manger

Hello Team,
Is there any option we can integrate two unity express with call manger,our customer having two CUE module and 2921 .
Thanks in advance

There's really nothing more to it than using a different user and different set of CTI integration, that's it, just follow the CUE-CUCM integration guide and don't use the same info for both.
HTH
java
if this helps, please rate
www.cisco.com/go/pdihelpdesk

Unity Express 7.4.1 and CUCM 8.5.1

Similar Messages

Maybe you are looking for