Unity Express Backup: Can we use DNS name of FTP server instead of IP address?

Gentlemen!
In the Unity Express system, can we use DNS name of FTP server (Microsoft FTP Server) instead of IP address in the General configuartion for Backup Server?
e.g. FTP://FTP_Server_Name/Directory
Additionally we need to configure/add DNS server name in the Domain Name settings under system menu. Is there any additional configuration would require for setting up FTP server with DNS entry & above config?
Regards,
Sky_Voice

Hi Sky_Voice,
This is a supported config
Backing Up and Restoring Data
Last Updated: May 12, 2010
Cisco Unity Express backup and restore functions use an FTP server to store and retrieve data. The backup function copies the files from the Cisco Unity Express application to the FTP server and the restore function copies the files from the FTP server to the Cisco Unity Express application. The FTP server can reside anywhere in the network if the backup and restore functions can access it with an IP address or hostname.
We recommend that backups be done regularly to preserve voice-mail messages and configuration data.
Backup and restore commands are available in configuration mode and in offline mode.
•In configuration mode, commands are available to set the following parameters:
–Number of backup files to keep (the oldest file is deleted).
–URL of the FTP server where the files will be stored.
•In offline mode, perform the backup or restore procedure. Decide the following:
–Type of files to be backed up: all files (configuration and data), only configuration files, or only data files. Data files consist of voice-mail messages. Configuration files consist of all other system and application parameters.
–URL of the FTP server where the files will be stored.
http://www.cisco.com/en/US/docs/voice_ip_comm/unity_exp/rel3_2/administrator/voicemail/11bkrst_ps5520_TSD_Products_Administration_Guide_Chapter.html
Cheers!
Rob

Similar Messages

ACE 4710 use dns name in real server

Is there any way to use a DNS name in real server and not a static IP.

Hi,
This is not possible at the moment. With ACE EOL, i don't think it would be added either.
Regards,
Kanwal
Note: Please mark answers if they are helpful.

Can we use Column Names in Parameter Cursor

Hi
can we use Column Names in Parameter Cursor??
DECLARE
CURSOR Emp_Cur (P_Deptno NUMBER)
IS
SELECT Empno, Ename
FROM Emp
WHERE Deptno = P_Deptno;
BEGIN
FOR Emp IN Emp_Cur(10)
LOOP
DBMS_OUTPUT.PUT_LINE('The Employee Number is: '||emp.Empno);
DBMS_OUTPUT.PUT_LINE('The Employee Name is: '||emp.Ename);
END LOOP;
FOR Emp IN Emp_Cur(20)
LOOP
DBMS_OUTPUT.PUT_LINE('The Employee Number is: '||emp.Empno);
DBMS_OUTPUT.PUT_LINE('The Employee Name is: '||emp.Ename);
END LOOP;
END;
In the above Program, I send Deptnumber. If i send Column names like Empno, Ename. What can i do??
If Declare Samething Through Parameter Cursor, it doesn't accept VARCHAR2(Size)

For parameters you don't use size, just the type (DATE, NUMBER, VARCHAR2, CLOB, ...)
DECLARE
CURSOR Emp_Cur (P_Ename VARCHAR2)
IS
    SELECT Empno, Ename
    FROM Emp
    WHERE Ename = P_Ename;
BEGIN
FOR Emp IN Emp_Cur('SCOTT')
LOOP
    DBMS_OUTPUT.PUT_LINE('The Employee Number is: '||emp.Empno);
    DBMS_OUTPUT.PUT_LINE('The Employee Name is: '||emp.Ename);
END LOOP;
END;

How can I use dns-sd to set up a priner to work with AirPrint?

How can I use dns-sd to set up a priner to work with AirPrint?
The priner is an HP LaserJet 1200 connected to the network with an HP JetDirect.

Some of the third-party apps like "handyPrint" are able to configre the HP JetDirect to work with AirPrint.
I am trying to work up my own solution.
SyBB

Irc account keeps disconnecting cannot use IM what is nick at the beginning of the name ..can i use another name ? thank you

hello i am trying to set up instant messaging ....the account keeeps disconnecting after a few seconds and i cannot make it work
it keeps saying nick ... what is nick at the beginning of the name ..can i use another name ?
if i use mozilla for IRC what is the server name ?
what other details do i need to type in ?
Thunderbird is running on a single home PC which only has Open Suse 13.1 x64 linux on it ( no Windows )
thank you

'nick' is your nickname which you entered when you set up the IRC chat. You can register your nickname by entering "/msg nickserv register <password> <email address>"
Then when you start next time enter "/msg nickserv identify <password>"
You can get a list of nickserv commands by entering "/msg nickserv help"

Can I use user names and password of Microsoft Office Outlook for hyperion

I'm new to Hyperion. Can anyone tell that can I use "user names" and "passwords" of Microsoft Office Outlook for login into hyperion applications.
I'm not talking about single sign on, but want to use same user names and passwords as that in Outlook.
ANy suggestions?

That depends on how your Outlook authentication is configured.
Hyperion is generally configured to authenticate against a network directory (NTLM, MSAD or LDAP). I'm not an Outlook expert, but my Outlook user ID and password is almost always my MSAD id and password (I change clients regularly, and it's almost always the same situation). So it's also usually the same as my Hyperion ID and password.
Ask your Outlook administrator whether it uses (or syncs with) MSAD, NTLM or LDAP. If the answer is yes, then you're in good shape because Hyperion can use these as well.
Hope this helps,
- Jake

Can we use different Databases (Oracle & SQL Server) in one report?

Post Author: venki5star
CA Forum: .NET
Hi there.
Can we use different databases (Oracle & SQL Server) in a same report?
If possible how?
Another question,
Can we change the Provider Name at runtime of the given report. If so the above question is useless...
Thanks in Advance.

I tried this using Oracle Provider for OLEDB (the one that supplied by Oracle Client) and Crystal Reports 9. you can drag the column into designer but the image does not appear in preview.
I guess it's because CR does not recognized it as image, and there are no information that the blob data is an image at all.

How can I use the credit on my account instead of credit card to buy apps?

I have a gift card credit on my account but when I want to buy an app it takes me to my credit card details. How can I use my credit on my account instead of credit card?

You shouldn't have to put in a credit card, no, but from time to time the iTunes Store seems for some reason to try to insist on one. If just confirming your mailing address doesn't stop it from complaining, go here:
http://www.apple.com/support/itunes/contact/
and follow the instructions to report the issue to the iTunes Store.
Regards.

How can i use my macbook as a server

How can i use my macbook as the server of my home network?

Depends on what you want to do with it. To operate as a full fledged "Server" you will need OSX Server Edition software. For simple server operations like file sharing, you can just adjust the sharing options in your preferences.

Can someone help me ue my ftp server

Hey guys. I was wondering if anyone out there has any experience using the built in ftp server. Heres what I would like to be able to accomplish and everytime I've tried in the past using it I fail. K, All I want woudl be to say, set up a file / folder that friends or say another person can download from my computer. Does this mean I have set up a new user account? Is the ftp server only usable for over local network, like in my house with other connected macs or windows. Can outside people access it or even myself from another computer. One more thing, I use DSL which has a firewall. I've open the ports for the main things I use. However how will this affect ftp server and how would this affect logging in. Hope to hear form someone.
Nathan

In the sharing system preferences you can designate folders that can be accessed by FTP. When you're presented with a login/password request, entering your account password will give you access to all drives and folders to which you already have permission to access (basically, everything on your computer). If you do not provide a login name, the server will present only those folders that are accessible by "everyone" (you can set this in the permissions next to the shared folders you designate in the "Sharing" control panel).
The guest user is the user that's enabled when folks dont enter a password. This allows "everyone" to view folders you designate as "public" (by giving view access to "everyone" as I mentioned above). This user cannot log into the computer, but instead is reserved for network or remote access.
Anyone can connect to your computer with FTP (if they know the ip address) once it's enable, but only you will have access to everything on your computer. If someone enters an incorrect login name it will either refuse them or only give them "guest" access, which is restricted to the shared folders you designate as viewable by "everyone".
If you want guests such as your friends to be able to access files, just put the files in the guest-accessible folders such as the "Public" folder in your home directory. This folder by default is a guest-readable (only read...they cannot write to it) directory that's set up in the system preferences as such for FTP/AFP server access.

Can SOA Suite acts as a FTP server?

Hi,
From documents, I known SOA Suite has inbound FTP adapter. Does that mean I can use it as a FTP server?
Thanks,

From documents, I known SOA Suite has inbound FTP adapter. Does that mean I can use it as a FTP server?No. FTP Adatper is not a FTP server. Oracle FILE/FTP adapter enables SOA components to exchange (read and write) files on local file systems and remote file systems (through use of the file transfer protocol (FTP)). The file contents can be both XML and non-XML data formats.
To know more, please refer -
http://download.oracle.com/docs/cd/E14571_01/integration.1111/e10231/adptr_file.htm#BABCJJCD
Regards,
Anuj

I have Macbook Air with Yosemite os but i can't transfer my file on ftp server

i have Macbook Air with Yosemite os but i can't transfer my file on ftp server
i need help

I'm confused how you think someone on Apple's discussion board can help you with what's clearly a Windows Server problem.
Surely this would be something better asked in a Microsoft support forum?

Add LPD printer using DNS name

I am trying to add a networked printer in the Print Center using LPD and the DNS name. Whenever, I type the full dns name, I get an message that says "invalid or incomplete address". I know the dns name is correct and can add it no problem to systems running OS X 10.6 and 10.7. I can also add it in 10.8 using the IP address.
Has something changed in Mountain Lion or is this a bug?

I was just on the phone with Apple support as well. The "senior advisor" I talked to said he was familiar with "some other instances" of this happening. He opened a case and told me he would get back with me as well. He did say there is no known resolution.
The initial person I sopke with told me they only support direct connection of printers, not networked printing. The senior advisor tolde me that this is an issue with non-Mountain Lion compatible drivers… We are running primarily HP and Xerox workgroup-class devices that are a few months old up to 5 or 6 years old. They all print fine in ML if we get them set up (using an IP address). We are a publisher and would notice very quickly if print drivers didn't work correctly.
Hopefully, others reading this post will contact Apple as well. The squeaky wheel gets the attention. Will update this post when I hear back.
Kevin

TM backup: can I use two drives to back up data on two other drives?

Hi to all!
I have with me a 1 TB/ Thunderbolt EHD [external hard drive], a Lacie 2 TB/FW, EHD, a Seagate 2 TB/ 2 USB, EHD, a Seagate 3 TB/ 2 USB, EHD and [to be purchased] a Seagate 2 TB/ 2 USB, EHD.
I mainly use my Mac for making HD videos using FCPX.
I am planning to use these drives in the following manner as indicated by the table below:
Drive:
a
1 TB,
Thunderbolt,
Buffalo
b
2 TB/ FW
LaCie
c
2 TB/ 2 usb
Seagate
d
3 TB/ 2 usb
Seagate
e
2 TB/ 2 usb
Seagate backup
[to be purchased]
f
500 GB, internal
Macintosh HD
Partitions
1
1
1
2
1
USAGE:
editing videos, one
active project at a time
mainly for camera
archives, music files,
FCP events, projects
and exported movies
same as the LaCie,
as a backup of data
intend to have 2
partitions of 1.5 TB each;
one partition for personal
data and the other partition
to back up data on the
Thunderbolt [current project]
intend to use this for
TM back up of my
Mac's internal HD
applications, documents etc.
backed up by:
one partition of 'd'
by the 2 TB Seagate
backup 'e'
I would like to know whether I could do these things:
Can I use the TM backup feature in this manner of using 2 separate drive/partition [e/d] to back up data on 2 other drives [f and a]?
Further, I am manually copying files from 'b' drive to 'c' drive; without incurring further expense, can I ensure that whatever I write onto the LaCie [b] gets copied to the 'c' drive automatically?
Any thoughts, suggestions and instructions in these matters are welcome.

EXT. DRIVES:
a
1 TB
Thunderbolt
b
2 TB/FW
[LaCie]
c
2 TB/ USB
[Seagate]
d
3 TB/USB
[Seagate]
e
2 TB/USB
[Seagate]
USAGE:
scratch disk
[planning to have
only one active
project at a time]
camera footage
FCPX events, projects
and completed movies
Same as the LaCie,
as it's backup
To be used as TM
backup for my Mac's
internal and also to
the scratch disk.
Planning to have it in
2 partitions: to have
a 'secondary' copy of
my Mac's IHD on one
partition and to have
personal 'net retrievable'
data on the other partition.
'MY
OBSERVATIONS'
my projects are usually
less than 10 minutes
and hence I trust that
work would be fast and in
case of drive failure, I
would be losing only
one project.
I am importing camera footage
primarily into this drive and
being FW, data transfer is
fast.
Am manually copying
files from the LaCie
onto this.
This drive is not a
brand new one, but
has been given to me
by the company's
agent as a replacement
to my earlier 2 TB drive
which had failed.Hope
this also will not fail!
Because of the 'uncertain'
performance of the
3 TB Seagate, I intend
to have a copy of my
Mac's IHD in one
partition. I intend to place only
such data upon the other
partition that I will not be
greatly affected should the
drive fail.
If you can analyse this plan and give your insight upon this matter, I will be immensely happy.
Further, if this proposed use of the 3 TB Seagate is okay with you, I need to know how to remove the Thunderbolt from doing it's temporary role of TM backup and how to coronate the 3TB Seagate as its successor.
FYI, I would be switching off TM from functioning whenever I am editing video; I would be switching it on only after a full editing session.
Another question on my mind is this: do I need to partition the drive 'e' at all?
Message was edited by: somanna

Can I use file names from some folder to specisfly a value of a variable

so here is the thing I want to do:
I've got like 3 variables in my swf file which value tells to
the code how many picture there are to load.
So I have like
var totalPics:Number = 5
in my folder images I have 5 pics, but I want to put 3 more
so I want to make suck code that will check the total files in the
folder and return a value of 8 or check the name of the last file
found in the foulder like pic8.swf (I've made it into swf to load
in a loader) and to take that letter 8 from it as a value to put in
the variable totalPics so it is = 8.
Can u tell me is this possible to make in flash.... where I
should read helps or guides .. or just give me a simple example
please.
Thank u a lot. If u have any more questions, just ask me..

Very helpful of you guys ;] Thanks a lot.. so lets continue
on the matter..
GWD the second option is good but can work in a simplier
code.. mine is a bit complexed and by that I mean.. that the total
number of pics or things to load should be known for the main swf
file at his start. That is because before the turn for the pics to
load comes, there is something else that must happen first, and it
depends on that total number (actually 3 total numbers cuz there
are 3 folders with different pics that must mix) So.. can't use the
second option cuz it works good when the code is a bit more simple
than that.
If u didn't understand whant I tried to explain.. doesn't
matter.. not so important atm.
Now the thing with the LoadVars.. yes, I've been thinking the
same thing but like this: At the 1st frame in the main timeline I
have 3 variables that are used further in the code and that must be
predefined by how many pics there actually are, so.. I've been
thining to make 3 different var1.txt, var2.txt and var3.txt files
for example and to put there as value just the number I need. So
when I add more pics for example to my images folder, I edit the
txt file containing their total number and just change it so the
code can automatically add the new pics to the sequence.
I've got some examples of this how LoadVars works with txt
files and I think I can manage to do that, but anyway would be nice
of you to give me some example ;] and of course correct me if my
toughts above are not true.
Now.. SumTsb.. what u mentioned, I am interested in, because
I have a PHP guy, who can make me a code that automatically counts
and gives back the totalPics number from a certain folder (I don't
know for sure that it is possible but if it is he can do it). My
point is.. When he makes this code.. that reterns value of
totalPics, how can I redirect it so it changes the value of
totalPics inside my main swf file. I see only this as option at the
moment:
1) when someone adds or deletes files from the folder the php
code returns a different value, equal to the number of files in the
folder, and automatically changes the content of the file var1.txt
like this:
First off var1.txt has: &content=10 // this is the total
number of pics/swf files in the folder;
when u add.. like 3 more files.. the php code changes the
value inside of var1.txt to: &content=13 and when the main swf
is started he takes the new value and my problem is solved. Is this
what I say as example true ? If it is I guess the only thing left
for me is the php programer to make his code and job is done.
But answer me this question too: is it possible the php code
to return the value of the totalPics directly into the main swf
file. So if I have inside the main swf a variable at the first
frame ot the main timeline called totalPics, can the php give it a
value equal to the total numbers of files in a folder, and how ?
I guess I've written too too much :D so I'll wait what u will
answer me now.. I think you understood my idea.. and if more
questions arise I will write u back. And if no.. I will just thank
you a lot :D

Unity Express Backup: Can we use DNS name of FTP server instead of IP address?

Similar Messages

Maybe you are looking for