Unity fax id number question

I may already know the answer to this, but is there a waiting period that needs to pass before I can edit the fax id number in Unity due to the Exchange propegation period for recently created accounts?
Thanks, Chet

I figured it out. Fax ID number must 1st be typed in "Telephones" tab for Active Directory and then you have to copy and paste it into the Fax ID field for Unity. If you try and type the number in Unity you will get errors re: illegal carachter (spaces, -) Don't know why.
Chet

Similar Messages

No T.37 fax support / Unity fax tools in Unity Connection?

I'm moving from Unity 7 to Unity Connection 9.1
In unity we used the T.37 inbound fax / unity fax (ie Fax is sent from router running .tcl scripts as e-mail + tiff into central mailbox. Unity moved fax into specific mailbox based on DNIS matching "faxId" setting on unity mailbox).
It appears as though this is not supported in Unity Connection, is this correct?
I am think the workaround is to set the destination mailbox directly on the dailpeer on the router by specifying an individual target mailbox as the smtp destination (rather than sending all to a central mailbox for unity fax service to move). The only downside to this appears to be the admin for setting new fax, or moving the mailbox delivery destination now relies on changing the SMTP address specified in the router config, instead of changing the faxid with the Unity/Unity Connection GUI.
Is this how others have addressed this situation? (I have a limited number of inbound faxes only, no outgoing - so wont be looking at full-blown fax server).
Thanks.

Hi
I know how T37 is, sometimes is really difficult to get support for this. On CUC is the integration is not supported by Cisco, but you can try this:
- You can use T37 to send messages to CUC subscriber
- To do it [email protected], on CUC subscriber. If the gateway IP has been added as the fax server in Unity Connection, it should show up in the users web inbox as a fax message since it has the TIFF attach.
But I'm not sure if this works and Cisco does not support it.
Here's a link that might;
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/connection/9x/design/guide/9xcucdgx/9xcucdg080.html
Rgds

Fm Converting Fax Id Number to Filename

Hi,
I am using FM RSPO_NUMBER_TO_FILENAME to take my spool no. as exporting parameter and importing filename. My spool no. is filled from the close_form. Spool Id is generated in close_form and passing it to above Fm and getting filename and saving that file in unix directory.
Similarly, now my output type is Fax and i got faxid from Close_form and looking for FM to take it as exporting parmeter and gives the filename, so that i can save in unix directory.
Thanks in advance

I figured it out. Fax ID number must 1st be typed in "Telephones" tab for Active Directory and then you have to copy and paste it into the Fax ID field for Unity. If you try and type the number in Unity you will get errors re: illegal carachter (spaces, -) Don't know why.
Chet

A few Online Number Questions

First of all, I live in Canada and it doesn't appear that I can get a Canadian online number. Any idea when that will become available?
Also, is there any way to change the Call Display feature to display not only a business name, but also a number that is DIFFERENT than the online number. As I cannot get a Canadian online number, I would need the call display to read my business name, and then the local Canadian phone number that I would like people to call (so they avoid long distance charges).
Any help you could provide would be apprecaited.
KC

I have a similar question.
Any idea if Online Numbers might be available for India ? Any timeline as of now ?

HELP!!! Not your average Serial Number question!

Hey guys, I'm in a bit of a rut. I'm not asking for a serial number, I just need to know where on my computer to find it.
STORY:
I had to erase my mac because Avid messed it all up. Yay Avid!. Anyways, I'm covered for backups though. I have a time machine backup, a bootable external that I cloned as my hard drive pre-erase, and a disk image of my computer pre-erase.
I'm reinstalling all the apps, including FCS 2, but I got the upgrade version. I no longer have the box for Final Cut Studio 1 (or 5.1 or whatever we're calling it) but I have the serial number that I wrote on a post it fromthe last time I did this. My handwriting is legible, but for whatever reason, the FCS installer is accepting the FCS2 upgrade serial, but not the FCS1 serial. Since I have so many copies of my computer pre-erase, I remember before I was able to find a file (can't remember which program, possibly FCP) that had the serial number somewhere in the library folder.
QUESTION: Is there somewhere on the copies of my hard drive pre-erase where that FCS1 serial could be hidden? I need it so I install FCS2, without which, is worthless . And so am I, without my editing software :P.
THANKS GUYS! You're always a big help.

I no longer have the box for Final Cut Studio 1 (or 5.1 or whatever we're calling it)
Do you have the original Apple-branded disks for FCS 5.1?
y/n
No disks = no software just a stolen serial number written on a post-it note.

Quickbooks / Business Catalyst item number question

I just synced BC with my Quickbooks company file. Everything worked correctly except when sales receipts were created for orders on the site, it didn't use the product SKU (item number) that I have in BC and Quickbooks (both the exact same numbers associated with products), it created a new item called "Online Shop - Product" and used that for every product sold. This is a problem for us because we use Quickbooks to track our inventory. If BC isn't connecting its item numbers to the ones we have in Quickbooks, inventory isn't taken out when it should be. Is there something I can do about this or is this just how the QB/BC integration works? Very frustrating.
Thanks in advance for any help.

I've speced and quoted it 3-4 times, one client is looking to build end of the year, but it depends on the quickbooks version and some other factors (like how deep you want the integration and your expectations) so each quote and implementation is a little different, drop me a private message if you are looking to implement or happy to answer any questions here.

Page number question

Page numbers are not transferring consistently from master pages. Also, some pages in the 'pages' window have () around them while others don't. Those with () do not show page numbers on right hand page of two-page spread. Can anyone tell me what is happening and how I might go about fixing the problem? Thank you.

Peter,
Checked layers - everything in the proper order, still no numbers on several
document pages.
Rebuilt the page number marker on the master page causing problems - still
no numbers on several document pages.
Over-riding or deletion of the markers would have to occur on the master or
the document? I did not intentionally override anything so this may be the
problem. Though perhaps not because several pages within the document using
the master in question are showing the right page numbers correctly and
others are not.
More information? What do you need? Thanks.
Dina

Unity reporting wrong number of messages

This is Unity Connection 8.6.2.
I have a couple of VM boxes with wrong number of messages. Users are getting false indications of messages on their phones as well.
We rebuilt one these VM boxes and the issue is gone on that extension. Rebooting the server didn't fix it.
Any idea what would cause this?

We found that someone changed the Aging Policy for the users set to Do Not Age Messages. This caused the system to keep deleted messages for over 2 years. We set them back to Default System Policy and the number is back to a normal level.

Online Number question

Hello,
We just purchased a 12 month Online Skype Number with USA, Seattle area code and we have a question: Will this number work without the +1 dial if we are called from the US?
Can we buy a real American phone number, if yes what are the costs?
Thanks’ in advance.

Philonline2012 wrote:
I want to use skype a a backup to my cell phone. I will be using it over a wi-fi connection on an iPod Touch. My question is...do I need an online number to call landlines/cell phones and for them to be able to call me?
You would need an Online Number to receive calls from telephones with your Skype account, and a subscription (or Skype Credit) to be able to call telephones from Skype. Except for Caller ID (depending on what country your Online Number is from), Online Numbers do nothing for calling telephones.
Patrick
Location/Ubicacion: Arizona USA
Time Zone/Hora Local: UTC/GMT -7
If this message has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.
Si esto mensaje le ha ayudado, por favor haga clic en "Aceptar como solución". Si encuentra un mensaje útil, por favor "Da Kudos" al final del mensaje, por lo que esta información puede beneficiar a otros.
I am not a Skype employee. No soy un empleado de Skype.

Another page number question...

Hi (probably Paul again!),
Getting the page number in a form seems pretty straightforward if you use the handy prefab button. I'm working on a general office form, and the assumption is that the actual print copy will have more pages stapled to it (like for a fax).
I'd therefore like the option to add some page number padding to the xfa.host.numPages.
Trying this:
var numPages = 1;
var xtraPages = 0;
numPages.value = xfa.host.numPages;
this.rawValue = parseInt(numPages.value)+ parseInt(xtraPages.value);
when I app.alert it, it seems that the xfa.host.numPages isnt going into the numPages variable. Is there a trick to accessing the info in the xfa stuff?
thanks,
-jamie

thanks Paul.
that's making progress finally.
Do you have any further thoughts on where to keep the
numPages = xfa.host.numPages variable updated? I'm not getting it to recalculate with other events (like when the content flows to another page). I've tried it on layout:ready, calculate & form:ready. None of them are updating automatically, but if I tickle a different button on the form it will update to the correct value.
Oh, and the buttons that add fields which cause another page to be added to have the xfa.form.recalculate(1) set currently.
thanks again.
-jamie

No Skype Number Question

I dont want to buy a skype number so what are my alternatives? I cant find this simple answer anywhere. I want to be able to use my skype only for outbound calls. However, I need to know what phone number will show up on the caller ID to the person I call? Can i plug in my personal number to show up?

Hi, bobbymccall, and welcome to the Community,
You may set up your mobile number to use as Caller ID; here is a link to the FAQ article with instruction on how to do this:
https://support.skype.com/en/faq/FA1248/what-is-caller-identification-and-how-do-i-set-it-up
Regards,
Elaine
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

Windows Server 2012 Fax Server - Route Incoming Fax By Number?

I don't think we can do this, but I am going to ask anyway. At one site we have a Windows Server 2012 running the built in fax service. It works just fine.
The customer has several unused 0845 numbers which are routed to a single landline for inbound fax, and would like to publish these 0845 numbers as fax numbers for different departments.
Each 0845 number will still terminate at the same landline for inbound fax and so we would like, if possible, to set inbound fax rules to route faxes to different email addresses depending upon the 0845 number to which they have been sent.
My guess is that we can't do it with the built in service, or can we? and even if we had a premium fax server we may not be able to do it.
The fax server is running an old skool USR serial modem.
Stuart

Hi ,
Thank you for posting your issue in the forum.
I am trying to involve someone familiar with this topic to further look at this issue. There might be some time delay. Appreciate your patience.
Thank you for your understanding and support.
Best Regards,
Andy Qi
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback on our support quality, please send your feedback
here.
Andy Qi
TechNet Community Support

Iphone sync phone number questions

I am sync my iphone to my google apps contacts with the google iphone app. Everything works fine.
One contact, however, has two mobile numbers. The 2nd mobile number is the 3rd phone number. That 3rd phone number does not sync at all to iphone.
I will post to google, but first I want to make sure this is not an iphone issue.
Iphone can sync to as many phone numbers as there are, right?
Iphone can handle multiple mobile number, right?
Sometimes I get a work fax synced instead of a work number, not an iphone issue, right?
thanks!
bob

It's a known issue with Google Sync - remember that it's a beta!
http://www.google.com/support/mobile/bin/answer.py?hl=en&answer=139635
*Limited Contact Information*
+The iPhone can synchronize up to 3 email address. Phone number synchronization is limited to 2 Home numbers, 1 Home Fax, _1 Mobile_, 1 Pager, 3 Work (one will be labeled 'Company Main') and one Work Fax number.+

PC-FAX phone number input

Is there a way to do this with a Brother MCF-9340CDW that doesn't involve manually entering the number? Currently, I access the Fax window from the Print window, by clicking on the drop-down menu below the Pages: From: lines. I can't even copy and paste from Contacts because the number format with the () is rejected.
Before getting this printer I used a cheap USB fax-modem that was less than reliable. I accessed it from the PDF drop-down menu, and had full access to my Contacts from that menu. At least I don't have to send faxes frequently, because this is a PITA.
Thanks for any information anyone can provide.

Hi,
If you do not have time to use jQuery but need it asap,
you can use approach from Denes Kubicek samples:
http://htmldb.oracle.com/pls/otn/f?p=31517:154
called Auto Tab Phonenumber
Regards,
Oleg

Unity and IPCC SQL question

Hello All,
I have a question in regards to SQL, In the past I have been told that no maintenance was needed on the servers in regards to SQL (backups / reindex) and that it was all automated. Is that statement still correct in version 5 and 7 that we should not worry about the SQL installs on the box?
2. Because the SQL version is 2000. What are the steps for us to get the versions upgraded to at least SQL05?
I know that with unity you need to go to the cisco site and download the unity upgrades, but for IPCC what do i need to do ?
thank you

There is no SQL upgrade that i know of for either product, Unity 8 will be the 1st version that will support SQL 2005
•The applicable version of Microsoft SQL Server:
–On a system with more than 32 voice ports, SQL Server 2005 Standard Edition or SQL Server 2000 Standard Edition
–On a system with 32 or fewer voice ports, SQL Server 2005 Express or SQL Server 2000 Desktop Engine (MSDE 2000)
http://www.cisco.com/en/US/docs/voice_ip_comm/unity/8x/requirements/8xcusysreq.html
The requirement would be to upgrade to Unity 8.X
I believe UCCX won't change SQL version (and DB platform) until they release the Linux version which will drop SQL.
HTH
java
If this helps, please rate
www.cisco.com/go/pdihelpdesk

Unity fax id number question

Similar Messages

Maybe you are looking for