Unity Guru's - Can I automatically sync WMI's more than once a day?

Hey guys, I been fighting this new Unity/Microsoft MAPI/CDO bug (CSCti70702)/ KB2405611) with my Exchange 2010 servers. One of the symptoms is sporadic MWI on/off triggers to CM. So I’ve had to manually sync the MWI’s via the Telephone Integration Manager. Can anyone think of a way to run a resync job every x number of minutes until Microsoft can get this fixed? The TIM will only do it once a day.
Thanks everyone!

When I mention flooding the ports, I brought that up since I've seen any number of Unity systems (large and small) in production environments and have helped a number of users here in the forum that do not dedicate ports to MWI. Instead, it's not uncommon to find situations where all ports are set up to do everything. So, it's good that you've at least got some ports dedicated to MWI. Honestly, if you have 900 subscribers and over 96 ports - you would never run into this anyway. I've done installs where there are 4000+ users that only have 96 ports ... so no worries there.
The scenario you're talking about makes sense. Ideally, no - you wouldn't need to mass reset the MWI on a healthy Unity system other than the scheduled UTIM operation. In your case, sounds like it is warranted as a short-term tactical solution to a problem that is identified and not yet fixed. However, as you know the UTIM only does this once a day and I do not know of any other way to schedule or invoke the resync operation outside of the manual method you are using now.
Hailey

Similar Messages

HT204370 Can I rent the same movie more than once?

Can I rent the same movie more than once?

Yes, as long as you do so within the 24/48 hour period.
(73178)

HT1657 Can I watch the rented movie more than once?

Can I watch the rented movie more than once?

Yes, as long as you do so within the 24/48 hour period.
(73178)

How can I add the same song more than once?

how can I add the same song to my ipod shuffle more than once?

Thanks. I tested it, and found that I can create a bookmark in FolderA, and them manually copy it to FolderB, FolderC, and FolderD.
Once that is done, I tried the old method of "Bookmarks" --> "Bookmark This Page" and added it to FolderE. When I did that, it deleted the copy in FolderD but left the other three alone!
This is fine with me. I personally think this is a bug, because I don't think that Firefox should ever delete a bookmark without asking me (or at least, informing me). But now that I understand the algorithm, I can work around it. Thanks!

Can I use the CD key more than once?

I bought Lightroom as a Christmas present for my husband this year, but his laptop was stolen recently. It will be a few months before we can afford getting him a new one, and I want him to still be able to use Lightroom until then, so I was considering installing it on my computer, if it will do so (my computer is getting a bit old). But I don't want to do that unless he'll still be able to use the CD key to install it on a new laptop once we get him one. I've never had to worry about installing software on more than one computer, so I'm not completely sure of myself here. Any advice?

LR’s license, like most Adobe products’ licenses, is for one person on two different computers, with a desktop and a laptop or a work computer and a home computer being the typical examples, as long as only one of those computers is used at a time.

If I visit a site more than once per day, that site comes up with plugins that don't work and a very altered display without photos or graphics-- can fix this by erasing all cookies and history, but am often required to do this 5x per day

So far have experienced this apparent reversion to HTML caches with my blog on Wordpress, Ebay and http://coloncancersupport.colonclub.com/viewforum.php?f=1
Updating to latest Firefox did not solve problem.
Cannot connect to firefox live chat

I'm having a little trouble understanding the part about your password having to be reset. Why is that happening??
Let's start with Firefox's settings:
(1) You can configure the password manager feature on this tab:
orange Firefox button (or Tools menu) > Options > Security
There is a checkbox to enable/disable the feature.
There also is a "Saved Passwords" button to review and remove any passwords you do not want Firefox to keep.
That tab also has a feature to set a Master Password so that no one can use your saved passwords without knowing the Master Password. You may need to exit Firefox in order for Firefox to ask for that again.
Related articles:
* [[Password manager - Remember, delete and change saved passwords in Firefox]]
* [[Use a Master Password to protect stored logins and passwords]]
(2) Site-specific permissions
If you want to use the password manager for other sites but NOT a particular site, you can configure that in the Permissions Manager.
In a new tab, type or paste '''about:permissions''' in the address bar and press Enter.
After the page loads, use the search box in the upper left corner to narrow down the list to the site you want to configure. Highlight the site on the left side, and on the right side, choose Block under Store Passwords.
(3) Form autocomplete suggestions
Separate from passwords, Firefox remembers entries you've made into forms (in most cases) and lists the matching ones below the form field in a drop-down.
To clear a suggestion, press the down arrow key to highlight it and press the Delete key.
To turn off this feature, see this article: [[Control whether Firefox automatically fills in forms with your information]].
To review and selectively edit or delete form history entries, you need an add-on. For example, you could try this one: https://addons.mozilla.org/firefox/addon/form-history-control/

How can I bookmark the same site more than once?

I have a large number of bookmarks, organized into many folders.
Sometimes I want two copies of the same bookmark, in different folders. But Firefox 3 does not seem to permit this. If the bookmark already exists, in _any_ folder, adding it to a different folder deletes the earlier copy.
REPRO: Go to a page with a fixed URL. Choose "Bookmark This Page", select FolderA in your bookmark folders, and press Done. Now choose "Bookmark This Page" again, and this time choose FolderB. EXPECTED RESULT: The page in question should now appear in both FolderA and FolderB. ACTUAL RESULT: The page is in FolderB, but _not_ in FolderA.
Is there any way to avoid this? I use folders to save myself a lot of time. For example, when I need to work on a paper for one of my classes, I go to the appropriate bookmark folder and choose "Open All in Tabs". When I want to work on a different class, I go to a different folder and choose "Open All in Tabs." But I am unfortunately prevented from placing a site in both folders!

Thanks. I tested it, and found that I can create a bookmark in FolderA, and them manually copy it to FolderB, FolderC, and FolderD.
Once that is done, I tried the old method of "Bookmarks" --> "Bookmark This Page" and added it to FolderE. When I did that, it deleted the copy in FolderD but left the other three alone!
This is fine with me. I personally think this is a bug, because I don't think that Firefox should ever delete a bookmark without asking me (or at least, informing me). But now that I understand the algorithm, I can work around it. Thanks!

My 4s has no sound on most outgoing calls. i constantly have to turn my phone off and on more than once a day to get it to work. how can i get this fixed?

My 4s has no sound on most of the outgoing calls i make. It will ring the other phone I am calling but I cannot hear it nor can they hear me when they answer. Its just dead air but my phone timer is in use. How can this be corrected?

It's very possible that you have stuff running in the background that you don't even realize you have running. For example the default is for all notifications to be on and you usually need few to none of them.
That said, while an iPad can run warm, too hot to handle isn't right. ALso you should get about 10 hours....depending on what you're doing of course. If you're doing processor intensive stuff, like gaming and videos it can drain faster and generate more heat.
I would say if you have an apple store near by, make an appointment and have them check it out. If the issue is due to what they determine to be manufacturer's defects then it could fall under the warranty. But that's up to the store to determine.

Can I fetch files from Ideas more than once

I read that I can group ideas files into projects using folders after I had fetched files in Draw.
Can I fetch ideas files again?

Hi,
The "Fetch All Files" functionality under the Settings\Manage Files option is to perform a "one time fetch" and bring files from previous versions of Adobe Ideas into the project organizer in Draw.
Hope this helps,
Jose

Can I run Exchange 2013 Schema more than once

I have started in installing Exchange 2013. I ran schema update using the Exchange 2013 RTM. Should I go ahead and install Exch2013 RTm and just run the updates afterwards or should I run schema update again using the Exch2013 SP1 setup.exe?

Exchange 2013 CU5 is the latest one so if you haven't installed Exchange yet, I would suggest you to run the schema update again for
CU5 and then install instead of installing RTM first...
But if something is blocking you to run Schema upgrade again currently then you can go for Exchange 2013 RTM install too, only thing is you would end up spending double time installing and upgrading and fighting with known bugs between RTM and CU5...
Blog |
Get Your Exchange Powershell Tip of the Day from here

Can you download OSX Mountain Lion more than once on your computers after paying the $19.99

If I purchase mountain lion on my itunes/app store account, can I use that same account on my other mac to download mountain lion without paying another $19.99? I am currently waiting for my email for a free copy but If i can do multiple downlaods without paying extra, I would rather purchase it so I can download mountain lion on my ineligible computer and my newer one too

yes, you can install ML on all the macs you own as long as you use the same Mac App Store ID singing into each of them.

Can you run the Import Wizard more than once at the same time?

We're going to run the Import Wizard to import content from one BO environment to another. Can we, at the same time, run the Import Wizard to import different content between those two environments (using the same source and destination both times)? Obviously we'd have to run the wizard on different workstations.
Would this cause any issues? If so, what kind of issues would you expect?
Thanks,
Laura

Yes, this is possible. The source and destination CMSs treat the requests from the Import Wizard like any other -- increasing the number of active Import Wizard sessions just increases the load on these CMSs. Before running multiple Import Wizard sessions, be sure there is ample processing power (CPU / memory) to handle the increased load. and of course, avoid 'touching' the same content in the two sessions in order to avoid unpredictable results.
-Mike

Can I use a credit card more than once to create an apple/iTunes account?

Because I want to create an account but I need a credit card. So I'm planning to use my sisters and then change it afterwards when I select the NONE option for a credit card!!!

See Here for
Changing Account Information
http://support.apple.com/kb/HT1918

Flash form error, can't use the same name more than once? need workaround

I've always written my forms to have multiple buttons, one
for updating and one for deleting. so in html I would do this:
<input type=submit name=action value=Update>
<input type=submit name=action value=Delete>
so I'm trying the same thing with flash forms in cold fusion:
<cfinput label="Update" name="action" type="submit"
value="Update">
<cfinput label="Delete" name="action" type="submit"
value="Delete">
but now I get this message:
2 Errors found.
Error /index.cfm:334
id 'action' was already defined on line 333
Error /index.cfm:335
id 'action' was already defined on line 333
Is there a way to make this work or do I have to either
create a special action_delete or a new form? I'd like to keep the
logic the way I like.
Any suggestions?
Thanks,
John

I was hoping to do logic like this
<cfparam name="action" default="list">
<cfif action equal "list">
<cfelseif action equal "update">
<cfelseif action equal "detail">
<cfelseif action equal "delete">
</cfif>
So I just converted everything to html and things work the
way I like. thanks anyway. The forms don't really buy me anything.

Can I use a credit card more than once to create an natures

Ok so i

Sorry please ignore this., I messed up....kinds new to iPad so I accindently enter this wrong question!!

Unity Guru's - Can I automatically sync WMI's more than once a day?

Similar Messages

Maybe you are looking for