Unity's Connection with Exchange Mailboxes

We are migrating to a new child domain of a new forest. In the first phase of the move we are migrating our Exchange cluster. The plan was to install our Unity server into the new domain two weeks before we actually cut over our users. We are restoring mailbox data to the new Exchange cluster and installing Unity to partner with this new Exchange install. Two weeks later right before the final user cutover we will be deleting all users and restoring the accounts again to update mail data. My question is how will Unity take this deleting and rebuilding the mailboxes? The SIDs will change when we make this second restore, but the accounts will be the same.
I am thinking this will not work judging from Unity's prerequisites for installation.
Any help or personal experience to something similar would be very much appreciated.

Hi mahmoodmkl,
So to summarize: Person from the PSTN calls user on CUC which has accept and relay to an Exchange address, and message never shows up via TUI (Telephone User Interface) or Outlook.
Go to Unity Connection Serviceability page> Micro Traces> MTA, enable all except high and low level.
Post the traces, name and alias of the user. You can also check it, there should be enough info to tell if messages are going through. Also check if the message count for the undeliverablemessagesmailbox increases each time a message is left.
And just for further clarification this would not be an integration, this is just relaying messages.
-David

Similar Messages

Outlook 2013 not connect with Exchange server 2013 in internal network

Hello All,
I Have two Exchange server 2013 in our environment. Both server install mailbox and CAS role. After configure exchange server 2013, Outlook 2013 not connect in internal network. I have configure outlook manually. i tried by using the suggestion from blog
but not work. Outlook show that Server cannot connect/ server name could not be resolved. in outlook setting i also put exchange proxy setting. In exchange admin center i have changed the OWA, OAB, Auto discover name. But still not work.
I know that outlook can be connect from external by using ssl certificate and publish outlook anywhere but i did my configure from internal network.
Can you please suggest as soon as possible.
Thanks,
Parvez

Hi,
Firstly, I’d like to explain, same with external users, internal users use Outlook Anywhere to connect with Exchange server and use Autodiscover get all settings.
Thus, let’s try the following resolutions:
1. run the following command: get-clientaccessservice |fl autodiscoverserviceinternaluri
2. check if the host name in the above URL is in the DNS server and there is a DNS entry about the host name points to the proper IP address.
3. Check if the above host name is in your certificate.
Thanks,
Angela
Angela Shi
TechNet Community Support

Does anyone know how to get apple mail in Lion to connect with Exchange 2007?

Does anyone know how to get apple mail in Lion 10.7.2 to connect with Exchange 2007? It worked perfectly with Snow Leopard... upgraded to lion and it won't work. We use Exchange 2007 with SP 3 and Rollup 4. Won't connect... and I can't get Apple to give me any direction.

We finally got it to work today. We had to call and pay for the microsoft support service, but the issue was on the server end. We had to go into the iis manager... went to sites... when to default website...and changed the SSL settings for Auto Discover, EWS Exadmin, echange, exchweb, owa... and the rest..
Change the settings to ignore client certificates.
Problem solved. Can finally send and receive.

Unity cannot connect to Exchange 2010 mailbox

Unity 8 with Es9 and call manager: System version: 8.5.1.11900-21.
Out of nowhere one of the mailboxes has this issue:
System version: 8.5.1.11900-21
This message has the following recipients : ([vm3131] ). The recipient mailboxes may be disabled or inaccessible, Cisco Unity may be having trouble connecting with the partner server, or the Cisco Unity messaging component may not be properly configured.
Any ideas?
No problems with other mailboxes.

Hello Bart -
Take at look at this recent post from my Cisco friend Brad Mangnani and see if that user is hidden in AD -
https://supportforums.cisco.com/message/3301386
Sincerely, Ginger

Outlook can't connect with Exchange 2013 after migration from Exchange 2007

<style type="text/css">P { margin-bottom: 0.21cm; }</style>
Hello,
recently we've done a Exchange 2007 sp3 to 2013 sp1. Users can conect perfectly with OWA and with his iphone clients.
But the problem is they can't connect from his Outlook clients (2010, 2013), both internaly and externaly. Always fails with the message: The Connection to Exchange it is not avaliable.... Can't resolve the name of Exchange server.
To try to resolve it we've done:
- Check Outlook anywhere configuration en EAC: it is configure with and external url mail.company.com and internal server.domain.local. The security is the default Negociation, but we've tried all.
- Check the internal dns, there are records for mail.company.com and exchangeserverdomain.local pointing to the exchange local ip. Also there is a public zone company.com with the record mail.caompany.com pointing to the exchange local ip. Also we've made
records autodiscover.company.com and autodiscover.domain.local pointing to the exchange local ip.
- In the public dns from our domain there is the record A and MX pointing our public ip. There aren't any record Autodiscover but we think that the manial conection should work.
Check certificates: we've made a new self-signed certificate including all this internal and external domains and for all services.
- Check Outlook Anywhere block: we've cheked.
Currently server state:
- Old Exchange 07 server can't start, it was in very bad state and we achieved migrate the mailbox to the new server, after that we tried to uninstall, but it crashes with a public folder replication error. We got uninstall all the roles
unless the mailbox. After a restart it can't start.
-The new Exchange 2013 looks great, there isn't any trail of the old server, or we haven't seen anything in the EAC or shell.
I paste below the result of Microsoft Remote conectivity analaizer, with Outlook anywhere test. It is clear that there is a problem with that.
Sorry because the test is in spanish and I translated it with google, from here I only can access the tool in spanish.
We continue to try to resolve the problem.
Thanks to all in advance!
Testing RPC / HTTP connectivity.
Error in testing RPC / HTTP.
additional Details
Elapsed time: 24295 ms.
Test steps
Connectivity Analyzer Microsoft is trying to test Autodiscover for [email protected] .
Error in automatic detection test .
additional Details
Elapsed time: 24294 ms.
Test steps
Attempting each method of contacting the Autodiscover service .
Failed to properly contact the Autodiscover service using all methods.
additional Details
Elapsed time: 24294 ms.
Test steps
Trying to prove possible Autodiscover URL https://empresa.com/AutoDiscover/AutoDiscover.xml
Error in testing this potential Autodiscover URL .
additional Details
Elapsed time: 1509 ms.
Test steps
Attempting to resolve the host name in DNS empresa.com .
The host name is resolved correctly .
additional Details
IP addresses returned : 80.36.252.194
Elapsed time: 507 ms.
Testing TCP port 443 on the host to ensure empresa.com listening or is open.
The port was opened successfully.
additional Details
Elapsed time: 464 ms.
Testing the SSL certificate to make sure it is valid.
The SSL certificate is not exceeded one or more certificate validation checks .
additional Details
Elapsed time: 537 ms.
Test steps
Connectivity Analyzer Microsoft is attempting to obtain the SSL certificate from remote server on port 443 empresa.com .
Connectivity Analyzer Microsoft successfully obtained the remote SSL certificate.
additional Details
Remote Certificate Subject : CN = mail.empresa.com , issuer : CN = mail.empresa.com .
Elapsed time: 454 ms.
Validating the certificate name .
The certificate name was validated successfully .
additional Details
Hostname empresa.com was found at the entrance of the alternative subject name of the certificate.
Elapsed time: 1 ms.
Is validating the trusted certificate .
Validation Error trusted certificate.
Test steps
Connectivity Analyzer Microsoft is trying to build certificate chains for certificate CN = mail.empresa.com .
Could not build a certificate chain for the certificate.
Tell me more about this issue and how to resolve
additional Details
The certificate chain did not end in a trusted root . Root = CN = mail.empresa.com
Elapsed time: 31 ms.
Trying to prove possible Autodiscover URL https://autodiscover.empresa.com/AutoDiscover/AutoDiscover.xml
Error in testing this potential Autodiscover URL .
additional Details
Elapsed time: 21723 ms.
Test steps
Attempting to resolve the host name in DNS autodiscover.empresa.com .
The host name is resolved correctly .
additional Details
IP addresses returned : 46.16.56.40
Elapsed time: 498 ms.
Testing TCP port 443 on the host to ensure autodiscover.empresa.com listening or is open.
The specified port is blocked , not listening or does not generate the expected response .
Tell me more about this issue and how to resolve
additional Details
Network Error communicating with the remote host.
Elapsed time: 21224 ms.
Attempting to contact the Autodiscover service with the HTTP redirect method .
Error when trying to contact the Autodiscover HTTP redirect method .
additional Details
Elapsed time: 606 ms.
Test steps
Attempting to resolve the host name in DNS autodiscover.empresa.com .
The host name is resolved correctly .
additional Details
IP addresses returned : 46.16.56.40
Elapsed time: 14 ms .
Testing TCP port 80 on the host to ensure autodiscover.empresa.com listening or is open.
The port was opened successfully.
additional Details
Elapsed time: 202 ms.
Connectivity Analyzer Microsoft is checking the automatic detection of host empresa.com for an HTTP redirect to the Autodiscover service.
Connectivity Analyzer Microsoft could not get a HTTP redirect response for Autodiscover .
additional Details
Web exception occurred because an HTTP 404 response was received - Unknown NotFound . Headers received: Connection : close Content- Length: 1209 Content- Type: text / html Date: Wed, 12 Mar 2014 15:27:58 GMT Server : Apache/2.2.9 (Debian ) PHP/5.2.6-1 +
lenny3 with Suhosin -Patch X -Powered -By : PHP/5.2.6-1 + lenny3 HTTP Response Headers : Connection : close Content- Length: 1209 Content- Type: text / html Date: Wed, 12 Mar 2014 15:27: 58 GMT Server : Apache/2.2.9 (Debian ) PHP/5.2.6-1 + lenny3 with
Suhosin -Patch X -Powered -By : PHP/5.2.6-1 + lenny3
Elapsed time: 388 ms.
Attempting to contact the Autodiscover service using the method of DNS SRV redirect server.
Connectivity Analyzer Microsoft could not contact the Autodiscover service using the DNS SRV redirect method .
additional Details
Elapsed time: 186 ms.
Test steps
Trying to find the SRV record in DNS _autodiscover._tcp.empresa.com .
Not the Autodiscover SRV record in DNS found .
Tell me more about this issue and how to resolve
additional Details
Elapsed time: 186 ms.
Checking for a CNAME record for Autodiscover in DNS for your domain " empresa.com " to Office 365.
Could not validate the Autodiscover CNAME record in DNS. If your mailbox is not in Office 365 , you can ignore this warning.
Tell me more about this issue and how to resolve
additional Details
No Autodiscover CNAME record for your domain ' empresa.com ' .
Elapsed time: 268 ms.
jspt

Hello,
We have the Self-signed certificate that comes with Exchange, and we've created a new self-signed including all our domains mail.company.com, domain.local, exchange13.domain.local, autodiscover.company.com, autodiscover.domain.local.
below I print you the result os the comand Get-ClientAccesServer | fl . Now we've configured a SPC objetct folow the instructions of Wizard
Exchange Server Deployment from Microsoft. We've executed the commands in our new Exchange 13, but can't did it in the old Exchange:
$AutodiscoverHostName = "autodiscover.contoso.com"Get-ExchangeServer | Where {($_.AdminDisplayVersion -Like "Version 8*") -And ($_.ServerRole -Like "*ClientAccess*")} | Set-ClientAccessServer -AutoDiscoverServiceInternalUri https://$AutodiscoverHostName/Autodiscover/Autodiscover.xmlThis is the result of
RunspaceId                           : 89c86f8e-d156-4480-b31d-59215976879b
Name                                 : EXCHANGE13
Fqdn                                 : EXCHANGE13.domain.local
ClientAccessArray                    :
OutlookAnywhereEnabled               : True
AutoDiscoverServiceCN                : EXCHANGE13
AutoDiscoverServiceClassName         : ms-Exchange-AutoDiscover-Service
AutoDiscoverServiceInternalUri       : https://autodiscover.company.com/Autodiscover/Autodiscover.xml
AutoDiscoverServiceGuid              : 77378f46-2c66-4aa9-a6a6-3e7a48b19596
AutoDiscoverSiteScope                : {Nombre-predeterminado-primer-sitio}
AlternateServiceAccountConfiguration :
IsOutOfService                       : False
WorkloadManagementPolicy             : DefaultWorkloadManagementPolicy_15.0.825.0
Identity                             : EXCHANGE13
IsValid                              : True
ExchangeVersion                      : 0.1 (8.0.535.0)
DistinguishedName                    : CN=EXCHANGE13,CN=Servers,CN=Exchange Administrative Group
                                       (FYDIBOHF23SPDLT),CN=Administrative
Groups,CN=First Organization,CN=Microsoft
                                       Exchange,CN=Services,CN=Configuration,DC=domain,DC=local
Guid                                 : e83055fe-217b-4ed6-9cd0-7711097baf99
ObjectCategory                       : domain.local/Configuration/Schema/ms-Exch-Exchange-Server
ObjectClass                          : {top, server, msExchExchangeServer}
WhenChanged                          : 09/03/2014 12:46:07
WhenCreated                          : 08/03/2014 19:15:54
WhenChangedUTC                       : 09/03/2014 11:46:07
WhenCreatedUTC                       : 08/03/2014 18:15:54
OrganizationId                       :
OriginatingServer                    : severdc.domain.local
ObjectState                          : Unchanged
I hope this stuff can help you.
Thanks!!
jspt

Intergrating Unity 7.0 with Exchange 2007

I have a customer that is currently on Unity 7.0 and Exchange 2003. They are building a new 2007 Server and want to intergrate it with Unity 7.0. Does anyone have any documentation or videos on how to do the migration?

Hello Dushaune,
Basically integrating means that you are going to change Message Store also known as the partner server (Exchange 2k3) to the new partner with Exchange 2k7. For this there are several steps:
-OAB and Extending AD schema
- PW (Permission Wizard)
- MSCW (Message Store Configuration Wizard)
You need to follow this mandatory steps on the guide:
Configuring Exchange 2007 for Cisco Unity & Extending the Active Directory Schema for Cisco Unity
http://www.cisco.com/en/US/docs/voice_ip_comm/unity/5x/installation/guide/umexnofo/5xcuigumenofo060.html#wp1942680
***Even though on the title you see unity 5.x this is still applicable for Unity 7.x, on the documentation guide you will read:
Note
The following link goes to a Release 5.x version of the guide; all 5.x content applies to version 7.x as well.
On the Exchange side make sure you meet the following system requirements:
Minimum Service Packs Required—Message Store
•Exchange 2007 Service Pack 1 Update Rollup 4:
–On Exchange 2007 servers that are running Windows Server 2008. Without the update rollup, message waiting indicators will not function properly. See Microsoft KB article 952580.
http://www.cisco.com/en/US/docs/voice_ip_comm/unity/7x/requirements/7xcusysreq.html#wp472166
As a side note but still related, i'm not sure what outlook version you have so make sure it is on the compatibility matrix:
http://www.cisco.com/en/US/partner/docs/voice_ip_comm/unity/compatibility/matrix/cuclientmtx.html#wp364674
As for the PW (Permission Wizard) it grants permissions for the Unity Service Accounts (Unity Install, Unity Directory Services and Unity Message Store) and to run it you need to be a domain admin. This tool is found on Tools Depot> Administration Tools> Permission Wizard. Make sure it is the latest and greatest version (3.0.0.7) For a more detailed understanding with screenshots go to:
Granting Permissions with Cisco Unity 5.0(1)+ Permissions Wizard
http://www.ciscounitytools.com/Applications/Unity/PermissionsWizard/Unity50/Help/PWHelp_ENU.htm
After you run the PW (Permission Wizard) you will get a pop-up window advising what permissions to apply depending on the Exchange version you choose, in this case:
Version of Exchange in Which Mailboxes Are Homed: Exchange 2007 only
Active Directory Account: Cisco Unity installation and Cisco Unity directory services
Permissions to Grant to previous AD (Active Directory) accounts:
Delegate Exchange Organization Administrator administrative control
Delegate Exchange Organization Administrator admininistrative control
The MSCW (Message Store Configuration Wizard) will define the actual partner. Here is a link with a short description:
https://supportforums.cisco.com/docs/DOC-23513
This tool is found on Control Panel> Add Remove Programs> Cisco Unity Message Store Configuration Wizard> Click on Change/Remove to execute it, below are the screenshots guiding through the tool. **The only screenshot missing is where you see a pencil writting a book, this means it's synchronizing, just let it finish.**
In this case my installation account was unityinstall, however sometimes people name then just Unity, or company_unityinstall and so on so chooose the applicable. For the admin account you could use unityadmi, i decided to use unityinstall:
In the screenshot i only have a 2010 Exchange, however this will reflect all Exchange versions in your deployment (2k3 and 2k7) chooose the applicable, also this will require to stop Unity, so no auto attendant and no voicemail during this time:
On this last part pay attention where it says Directory Service account:
Best Regards,
+|>@|/1D+

CFLDAP Create User with Exchange Mailbox

I'm trying to create Active Directory users via the cfldap
command, and that part seems to work ok. I'm having 2 problems with
my script though. First, here is my code snippet for the cfldap add
query:
<cfldap action="add"
dn="CN=#myCN#,OU=StudentPopulation,OU=People,DC=server,DC=com"
attributes="objectClass=top,person,organizationalPerson,user,inetOrgPerson;cn=#myCN#;
sn=#query.LAST_NAME#;givenName=#query.FIRST_NAME#;sAMAccountName=#myAN#;mail=#myAN#@server .com;displayName=#myCN#;description=#query.ID_NUMBER#;wWWHomePage=http://server.com/#myAN# ;initials=#query.MIDDLE_INITIAL#;userPrincipalName=[email protected];mailNickname=#myAN#;n ame=#myCN#"
delimiter=";"
separator=","
server="some.server.com"
port="389"
username="adminUser"
password="adminPass">
My first issue is that i have to also generate a dsmod
command that i put into a batch file and execute on the server. It
looks like:
dsmod user
"CN=#myCN#,OU=StudentPopulation,OU=People,DC=server,DC=com" -pwd
SOME@#myUID# -mustchpwd yes -disabled no
So is there anyway i can encorperate that dsmod into my
origional query?
Secondly, I want to create an exchange mailbox with my AD
account. Using an LDIF statement would require a line like:
homeMDB:
CN=SERVER-Employees,CN=SERVER,CN=InformationStore,CN=XMAIL,CN=Servers,CN=First
Administrative Group,CN=Administrative Groups,CN=Our Company
Name,CN=Microsoft
Exchange,CN=Services,CN=Configuration,DC=server,DC=com
I tried changing homeMDB variable to an attribute for my
cfldap statement, but it threw a "you can't do this" error.
Anyone have any ideas on how i can get this to work?

I don't know if you can or not, but you can write it out to a
text file and then use cfexecute to run the text file (.bat). I
hope that this helps. Thanks.
Chris

Curve 9320: Connect with Exchange 2007 without BES ?

Hello,
is it possible to connect with the Curve 9320 to a MS Exchange Server 2007 without a BES like with an Android Smartphone ? Our company have not a BES. Can i use WhatsApp & Co. without BES ?
Greatings
sky

Hi and Welcome to the Community!
sky2000 wrote:
is it possible to connect with the Curve 9320 to a MS Exchange Server 2007 without a BES like with an Android Smartphone ? Our company have not a BES.
Depending on what your email admins face to the internet, maybe. Via BIS, a BB can integrate with most all POP, IMAP, and OWA internet-facing systems. But, it will depend on what faces the internet:
KB03119 Requirements for integrating IMAP and POP email accounts with a BlackBerry Internet Service account
KB04478 Integrate POP accounts with the BlackBerry Internet Service
KB10154 How to integrate a POP or IMAP email account through advanced integration
KB03133How to integrate a Microsoft Outlook Web Access email address on BlackBerry smartphone
Depending on what your email system faces to the internet, one of those should get you going.
sky2000 wrote:
Can i use WhatsApp & Co. without BES ?
I know what "WhatsApp" is, but what is "WhatsApp & Co."? In any event, WhatsApp does not require BES (I have heard others report that it does require BIS though).
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

E71 cant connect with exchange server

I have tried to connect with our exchange server 2003 at work to sync my business e-mail but I am unable to connect. There should be a learn how feature on this topic on the nokia website.
Solved!
Go to Solution.

In my pionion, very minimal inputs are needed to get the connection for MFE.
Exchange server
Secure connection
Use default port
(For these you might need to contact the IT support team of your company)
Access point
(Based on the data plan you are subscribing)
User name
Password
Domain
(This I think you will be aware of)
Rest of the settings are more towards configuring and personalising the set up, and does not involve connectivity.
Hope this info helps.
Regards,
BK76

Windows XP SP3 and Outlook 2010 can't connect with Exchange 2010 or Exchange 2013

XP+SP3+Outlook 2010 can't connect to Exchange 2010&2013 in the internal network without safe mode.

Hi,
Did you get any error messages?
Do you have Outlook Anywhere and autodiscovery set up properly?
Can you ping the Exchange server?
Please use Test Email AutoConfiguration
to test if the Autodiscover service is configured properly. See:
https://hosting.intermedia.net/support/kb/default.asp?id=2150
We can also use the remote connectivity analyzer to troubleshoot the issue:
https://testconnectivity.microsoft.com/
In addition, turn off your firewall and anti-virus to check the result.
Hope this helps.
Best Regards,
Steve Fan
TechNet Community Support

Connect with Exchange server

We are using Coldfusion 9 and Exchange Server 2010.
I installed the certificate in CF 9.
The Exchange server is configured for using OWA.
With the follwing code:
<cfexchangeConnection
    action="open"
    username="<username>"
    password="<password>"
    server="<ip-address>"
    protocol="https"
    connection="testconn1">
I get following error:
Unable to connect to the Exchange server using HTTP/HTTPS protocol.
HTTP response code : 302
Anybody any ideas how to cennect with CF 9 to Exchange 2010?
regards
Feike

I seem to remember something about Exchange 2010 dropping WebDav which CF requires or something, and basically it won't work until CF10. Unless there's been some kind of update or someone knows more than I do about it.
Certainly tried it myself and just hit a brick wall.

Question with AS2 Connectivity with eXchange (JCAPS 5.1.3 U2)

All,
I'm using the eXchange product that goes with JCAPS. We are using a Business Protocol of X12 and a delivery protocol of AS2 over HTTP/HTTPS. I am getting the following exception and am wondering if anyone as seen this error before.
Regards,
John
Line 2.1 expecting: {http://seebeyond.exchange.httpHeaders}AS2HTTPHeaders, found: {}HTTP
Stack:
com.stc.otd.runtime.UnmarshalException: Line 2.1 expecting: {http://seebeyond.exchange.httpHeaders}AS2HTTPHeaders, found: {}HTTP
at AS2HTTPHeaders.AS2HTTPHeaders_.unmarshal(AS2HTTPHeaders.AS2HTTPHeaders_:902)
at AS2HTTPHeaders.AS2HTTPHeaders_.unmarshalFromString(AS2HTTPHeaders.AS2HTTPHeaders_:1024)
at com.sun.b2b.as2.collab.jcdEX_HttpClient_AS2.execute(com.sun.b2b.as2.collab.jcdEX_HttpClient_AS2:52)
at Deployment.cmAS2_Handlers_jcdEX_HttpClient_AS21.jcdEX_HttpClient_AS2_Runtime_Handler.handleRequest(Deployment.cmAS2_Handlers_jcdEX_HttpClient_AS21.jc
dEX_HttpClient_AS2_Runtime_Handler:393)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.sun.enterprise.security.SecurityUtil.invoke(SecurityUtil.java:140)
at com.sun.ejb.containers.EJBLocalObjectInvocationHandler.invoke(EJBLocalObjectInvocationHandler.java:135)
at $Proxy64.handleRequest(Unknown Source)
at com.stc.codegen.eInsightImpl.runtime.ejb.MDBWSProvider.invoke(MDBWSProvider.java:200)
at sun.reflect.GeneratedMethodAccessor3895.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.sun.enterprise.security.SecurityUtil$2.run(SecurityUtil.java:146)
at java.security.AccessController.doPrivileged(Native Method)
at com.sun.enterprise.security.application.EJBSecurityManager.doAsPrivileged(EJBSecurityManager.java:940)
at com.sun.enterprise.security.SecurityUtil.invoke(SecurityUtil.java:151)
at com.sun.ejb.containers.MessageBeanContainer.deliverMessage(MessageBeanContainer.java:948)
at com.sun.ejb.containers.MessageBeanListenerImpl.deliverMessage(MessageBeanListenerImpl.java:42)
at com.sun.enterprise.connectors.inflow.MessageEndpointInvocationHandler.invoke(MessageEndpointInvocationHandler.java:136)
at $Proxy71.invoke(Unknown Source)
at com.stc.bpms.bpelConnector.impl.AbstractWSProvider.invoke(AbstractWSProvider.java:105)
at com.stc.bpms.bpelImpl.runtime.Interpreter$1.run(Interpreter.java:659)
at com.stc.bpms.bpelConnector.impl.ExecutorImpl$WorkImpl.run(ExecutorImpl.java:338)
at com.sun.enterprise.connectors.work.OneWork.doWork(OneWork.java:54)
at com.sun.corba.ee.impl.orbutil.threadpool.ThreadPoolImpl$WorkerThread.run(ThreadPoolImpl.java:382)
-- caused by --
at Line 2.1: com.stc.otd.runtime.UnmarshalException: Line 2.1 expecting: {http://seebeyond.exchange.httpHeaders}AS2HTTPHeaders, found: {}HTTP
at com.stc.otd.xsd.runtime.provider.XsdParse.match(XsdParse.java:1123)
at com.stc.otd.xsd.runtime.provider.XsdParse.parseComplex(XsdParse.java:1037)
at com.stc.otd.xsd.runtime.provider.XsdParse.parse(XsdParse.java:1433)
at com.stc.otd.xsd.runtime.provider.XsdParse.parse(XsdParse.java:1411)
at AS2HTTPHeaders.AS2HTTPHeaders_.unmarshal(AS2HTTPHeaders.AS2HTTPHeaders_:900)
at AS2HTTPHeaders.AS2HTTPHeaders_.unmarshalFromString(AS2HTTPHeaders.AS2HTTPHeaders_:1024)
at com.sun.b2b.as2.collab.jcdEX_HttpClient_AS2.execute(com.sun.b2b.as2.collab.jcdEX_HttpClient_AS2:52)
at Deployment.cmAS2_Handlers_jcdEX_HttpClient_AS21.jcdEX_HttpClient_AS2_Runtime_Handler.handleRequest(Deployment.cmAS2_Handlers_jcdEX_HttpClient_AS21.jc
dEX_HttpClient_AS2_Runtime_Handler:393)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.sun.enterprise.security.SecurityUtil.invoke(SecurityUtil.java:140)
at com.sun.ejb.containers.EJBLocalObjectInvocationHandler.invoke(EJBLocalObjectInvocationHandler.java:135)
at $Proxy64.handleRequest(Unknown Source)
at com.stc.codegen.eInsightImpl.runtime.ejb.MDBWSProvider.invoke(MDBWSProvider.java:200)
at sun.reflect.GeneratedMethodAccessor3895.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.sun.enterprise.security.SecurityUtil$2.run(SecurityUtil.java:146)
at java.security.AccessController.doPrivileged(Native Method)
at com.sun.enterprise.security.application.EJBSecurityManager.doAsPrivileged(EJBSecurityManager.java:940)
at com.sun.enterprise.security.SecurityUtil.invoke(SecurityUtil.java:151)
at com.sun.ejb.containers.MessageBeanContainer.deliverMessage(MessageBeanContainer.java:948)
at com.sun.ejb.containers.MessageBeanListenerImpl.deliverMessage(MessageBeanListenerImpl.java:42)
at com.sun.enterprise.connectors.inflow.MessageEndpointInvocationHandler.invoke(MessageEndpointInvocationHandler.java:136)
at $Proxy71.invoke(Unknown Source)
at com.stc.bpms.bpelConnector.impl.AbstractWSProvider.invoke(AbstractWSProvider.java:105)
at com.stc.bpms.bpelImpl.runtime.Interpreter$1.run(Interpreter.java:659)
at com.stc.bpms.bpelConnector.impl.ExecutorImpl$WorkImpl.run(ExecutorImpl.java:338)
at com.sun.enterprise.connectors.work.OneWork.doWork(OneWork.java:54)
at com.sun.corba.ee.impl.orbutil.threadpool.ThreadPoolImpl$WorkerThread.run(ThreadPoolImpl.java:382)

the jsp pages are pre-compiled in a folder :
logicalhost\is\domains\MyDomain\generated\jsp\j2ee-apps\dpMyDP\My_war\org\apache\jsp\
sometimes these aren't updated.

Losing connection with Exchange Server (2003)

The cause of losing the connection is me disabling the Users Accounts in our MS Domain for Maintenance on the Network.
I assume there must be a certain amount of time where the iPhone trys to connect to the exchange server and then time's out or something like that.
Too get the connection back is usually a restart, turn off on on wifi or airplane mode or reenter the account password.
Any ideas on how I can still disable the user accounts and not have the iPhone's lose their connection or time out?

I don't think this is possible. I use Exchange server at work, so I can tell you what it will do:
- You can do "over the air" IMAP e-mail to your exchange server (if your IT dept supports it)
- You can desktop sync your appointments and edit the from the phone (Edit from phone means view notes, times, etc -- you cannot change attendees, etc.)

Exchange Server 2013 // MFCMAPI could connect with errors

While connecting with Exchange Server 2013 I have started facing problem with my application.
My application fails to connect to Exchange with below parameters, then i have tried using MFCMAPI to if everything is okay. MFCMAPI could connect with above errors.
And I have tried with program using below parameters, i still get network error from MAPI call. Can you kindly help, I can provide any additional
details needed.
___ props[prop_count].ulPropTag = PR_PROFILE_UNRESOLVED_NAME;
    props[prop_count].Value.lpszA   = <ProfileUnresolvedName>;
    prop_count++;
    props[prop_count].ulPropTag     = PR_PROFILE_UNRESOLVED_SERVER;
    props[prop_count].Value.lpszA   = <[email protected]>;
    prop_count++;
    // Setting this to TRUE causes OpenMsgStore() to fail with MAPI_E_UNCONFIGURED
    props[prop_count].ulPropTag      = PR_CONVERSION_PROHIBITED;
    props[prop_count].Value.b        = FALSE;
    prop_count++;
    props[prop_count].ulPropTag     = PR_PROFILE_CONFIG_FLAGS;
    props[prop_count].Value.l       = CONFIG_SERVICE /*| CONFIG_PROMPT_FOR_CREDENTIALS
| CONFIG_SHOW_CONNECT_UI */;
    prop_count++;
    props[prop_count].ulPropTag     = PR_DISPLAY_NAME;
    props[prop_count].Value.lpszA   = <Mailbox Profile Name>;
    prop_count++;
    //Above setting used to be sufficient to connect using RPC
    //Below parameters added to connect via HTTPS
    LPSTR pwszUser = "domain\\username"; //also tried
[email protected] AND username
    LPWSTR pwszPassword = L"paswword"; // Password has been encrypted using CryptProtectData
    props[prop_count].ulPropTag = PR_PROFILE_RPC_PROXY_SERVER_W;
   props[prop_count].Value.lpszW = L"https://ProxyHostname.domain";
    prop_count++;
    props[prop_count].ulPropTag = PR_PROFILE_RPC_PROXY_SERVER_AUTH_PACKAGE;
    props[prop_count].Value.l = RPC_C_AUTHN_NONE;      // RPC_C_HTTP_AUTHN_SCHEME_NTLM,
RPC_C_HTTP_AUTHN_SCHEME_BASIC
    prop_count++;
    props[prop_count].ulPropTag = PR_PROFILE_RPC_PROXY_SERVER_FLAGS;
    props[prop_count].Value.l = PRXF_ENABLED | PRXF_SSL;// | PRXF_IGNORE_SEC_WARNING; // | PRXF_IGNORE_SEC_WARNING;
    prop_count++;
    props[prop_count].ulPropTag = PR_PROFILE_RPC_PROXY_SERVER_PRINCIPAL_W;
    props[prop_count].Value.lpszW = L"msstd:certificateserverhostname.domain";
    prop_count++;
    props[prop_count].ulPropTag = PR_PROFILE_AUTH_PACKAGE;
    props[prop_count].Value.l = RPC_C_AUTHN_GSS_NEGOTIATE;
// RPC_C_AUTHN_WINNT, RPC_C_AUTHN_GSS_NEGOTIATE, RPC_C_AUTHN_NONE
    prop_count++;
    props[prop_count].ulPropTag = PR_PROFILE_AUTH_USER_W;
    props[prop_count].Value.lpszA = pwszUser;
    prop_count++;
    props[prop_count].ulPropTag = PR_PROFILE_AUTH_PASSWORD;
    props[prop_count].Value.bin.lpb = dataBlobOut.pbData;
    props[prop_count].Value.bin.cb = dataBlobOut.cbData;
    prop_count++;
    DB( (DB_PR _T("ConfigureExchangeService() About to configureMsgService\r\n"),
this ) );
    hres = lpServiceAdmin->ConfigureMsgService( exchUID, 0, config_flags, prop_count, props
    I still get MAPI_E_NETWORK not found
Are there any configuration changes need to be done on Exchange Server?
Is there any mistake in above parameters?
Kindly suggest.

You can refer Dave's blog post @
http://blogs.msdn.com/b/dvespa/archive/2013/05/21/how-to-mfcmapi-create-mapi-profile-exchange-2013.aspx
DeVa, M.S., {MSFT} Please remember to mark the replies as answers if they help

Can we connect Outlook with Exchange 2013 with the default Self-signed certificate?

Hi,
the question is very simple, but after several days searching in this forums and in the web I have not been able to find a definitive answer YES or NOT. I know that Self-signed certificates are not for a production enviroment and only for labs and we must
purchase a third party certificate or get one from a internal CA.
Anyone can answer this question with no doubt?
Thanks in advance!
jspt

Hi Abhi,
I wrote this question because in a recent migration to 2013 from 2007 we've found with this problem: you can view it in the post http://social.technet.microsoft.com/Forums/exchange/en-US/1ddd1e81-1061-4461-95dd-13de653ef8fe/outlook-cant-connect-with-exchange-2013-after-migration-from-exchange-2007?forum=exchangesvrdeploy.
Also I have installed a new exchange 2013 in a lab enviroment and I also have unabled to connect from a Outlook 2013. The problem is the same Outlook is unable to detect the exchange server. Many people in this forums told me that have to be a certificate
problem and for that I posted this question. Honestly, I don't know how to do for Outlook can be connect with Exchange 2013. I don't know what I'm doing wrong.
Anyway thanks for your answer.
jspt

Unity's Connection with Exchange Mailboxes

Similar Messages

Maybe you are looking for