Unity_UMR error 113 &137 Event viewer

i Have problem in unity 7.0 the voice mail not recievied to the user and the error come in event viewer that as per i attached Unity_UMR event ID 113 & 137 so can any help on this issue
Thanks,

Hi Kapil,
This is generally seen if the you have MAPI CDO installed and the Exchange System Manager has not uninstalled Successfully.
A few possible reasons for this problem:
1)Uninstallation on Exchange System Manager or installation of MAPI CDO was done using Microsoft Remote Desktop.
2)There are some leftover dlls of the of the Exchange System Manager in the Unity servers.
Things that you can try to resolve this problem:
++ Use VNC Session to uninstall/install Exchange System Manager and MAPI CDO.
++ Make sure there is no emsabp32.dll and emsmdb32.dll file in the Windows\System32 directory.
++ Windows\system32\mapi32.dll should be at version of 6.5.7654.9 or higher. Or still at version 1.x. Anything in between is no good.
Hope that helps!
Regards,
Saurabh

Similar Messages

Typographical error found in Event Viewer log for Event 8003. The source is "bowser" not browser.

I found a typographical error in the Event Viewer log.
Error 5/19/2014 1:07:52 AM bowser 8003 None
The body of the message is typical of the NetBIOS messages regarding master browser network control...
The master browser has received a server announcement from the computer...
Even though this is not critical, it should be updated at some point.
John

I found a typographical error in the Event Viewer log.
Error 5/19/2014 1:07:52 AM bowser 8003 None
The body of the message is typical of the NetBIOS messages regarding master browser network control...
The master browser has received a server announcement from the computer...
Even though this is not critical, it should be updated at some point.
John
it is deliberate, and, has been so, for 20years...
http://blogs.msdn.com/b/larryosterman/archive/2006/03/14/551368.aspx
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Question on an error message in Event Viewer.

Hi,
I had a question on a error message in event viewer for BO 3.0
Error Message:
Tried to allocate 20 windows desktop but only able to allocate 17 of them.The system may have reached its windows desktop limit.Please contact your system administrator.
Source:CR Processing server.
I have seen this error message before in BOEXIR2 for DeskI services but never for Crystal Reports.
What is the change in 3.0 architecture due to which we receive this error message for cr processing server.
Thanks in advance.

Please post this query to the Business Objects Enterprise Administration forum:
BI Platform
That forum is monitored by qualified technicians and you will get a faster response there.
Thank you for your understanding,
Ludek

Datacache.SPDistributedCache is probably down error found in event viewer Sharepoint 2013

I see this error every day in event viewer and Distributed Cache is Running in CA without any interruption.
How can i resolve it? what could it cause this error?
Thanks,
Deepak

Hi Deepak,
Please execute the commands below and see if there is any error return:
Get-Cache
Get-CacheHost
You could try restarting AppFabricCachingService.
https://sharepoint4admin.wordpress.com/2014/11/21/sharepoint-2013-event-id-6398-microsoft-office-server-userprofiles-lmtrepopulationjob-threw-an-exception/
Regards,
Rebecca Tu
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Error 62 in Event Viewer

Hi all
Could you shoe me about an error 62 that i saw in Event Viewer when i send email in SAP B1
Thank you!

Hi,
SAP Business One mailer uses only the SMTP protocol port 25. Therefore,
your mail server must allow SMTP traffic on the mentioned port and no firewall must be present between
the client and the server to stop traffic on that port.
The Error "Failed to connect to SMTP server" usually appears if a
firewall or Antivirus application blocks port 25 of SMTP Server for
B1. Could you please check if such applications are installed and if
so switch it temporally off and try again to send a email.
One simple thing you can do in order to test the connection between
the client and the server is to configure Outlook Express with the
desired settings.
If you cannot send email with Outlook Express, than that means that
either port 25 is blocked, your server doesn't listens on port 25 or
that your server doesn't know the SMTP protocol.
The solution for this would be to allow SMTP traffic on port 25
between the client and the server and to make sure that your server
"speaks" SMTP on port 25.
If you can send email with Outlook Express, than you have to replicate
the settings to SBOMailer, knowing that note 782611 states that it is not possible to use
authentication in order to send SMTP mails.
There are notes 782611 & 693306 describing how to configure this.
If your server uses SMTP authentication, then note (782611) will give
you explanations on how to fix this.
Hope this will help.
Regards,
Gagan Thareja

SearchProtocolHost.exe Error Messages in Event Viewer

I see the following application error on SearchProtocolHost.exe several times a minute on my Windows 2008 R2 server. What is wrong and how do I fix this? I am using Office 2010 if it matters.
Log Name: Application
Source: Application Error
Date: 09/03/2014 11:01:54 AM
Event ID: 1000
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: IHE-DEV8NEW-11V.Americas.mittalco.com
Description:
Faulting application name: SearchProtocolHost.exe, version: 7.0.7601.17610, time stamp: 0x4dc0c63a
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x00000000
Faulting process id: 0x387c
Faulting application start time: 0x01cfc7906160b42c
Faulting application path: C:\Windows\sysWow64\SearchProtocolHost.exe
Faulting module path: unknown
Report Id: 9f4d9c20-3383-11e4-b0f8-00155d9da6a9
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-09-03T16:01:54.000000000Z" />
<EventRecordID>4901105</EventRecordID>
<Channel>Application</Channel>
<Computer>IHE-DEV8NEW-11V.Americas.mittalco.com</Computer>
<Security />
</System>
<EventData>
<Data>SearchProtocolHost.exe</Data>
<Data>7.0.7601.17610</Data>
<Data>4dc0c63a</Data>
<Data>unknown</Data>
<Data>0.0.0.0</Data>
<Data>00000000</Data>
<Data>c0000005</Data>
<Data>00000000</Data>
<Data>387c</Data>
<Data>01cfc7906160b42c</Data>
<Data>C:\Windows\sysWow64\SearchProtocolHost.exe</Data>
<Data>unknown</Data>
<Data>9f4d9c20-3383-11e4-b0f8-00155d9da6a9</Data>
</EventData>
</Event>
Ray Pietrzak

Hi Ray,
à
the CPU performance on this machine is near 100% unless I disable the Windows Search Service.
Would you please let me know whether this Application error (Event ID 1000) still generate when you disabled
Windows Search service to reduce CPU usage? Just a confirmation. Thanks for your understanding.
Please run
sfc/ scannow command to scan all protected system files. Meanwhile, would you please let me know whether install any third-party application in the Windows Server 2008 R2? Please perform
a Clean Boot to eliminate software conflicts and check if this issue still exists.
à
I am using Office 2010 if it matters.
Would you please let me confirm whether install Microsoft Office 2010 Service Pack 1? If installed, please
open System Properties and navigate to Advanced tab, then click “Environment Variables…” button. In Environment Variables, please edit Path in System variables and then add the Office 14 folder to the end of it. Then restart the server and check if can help
you.
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu

Critical error in my event viewer

pavilion g4
windows 7
Log Name: Microsoft-Windows-Diagnostics-Performance/Operational
Source: Microsoft-Windows-Diagnostics-Performance
Date: 7/21/2013 12:12:07 PM
Event ID: 351
Task Category: Standby Performance Monitoring
Level: Critical
Keywords: Event Log
User: LOCAL SERVICE
Computer: bryan-HP
Description:
This driver responded slower than expected to the resume request while servicing this device:
Driver File Name : \Driver\amdkmdap
Driver Friendly Name : AMD multi-vendor Miniport Driver
Driver Version : 8.14.01.6226
Driver Total Time : 5844ms
Driver Degradation Time : 3755ms
Incident Time (UTC) : ‎2013‎-‎07‎-‎21T04:11:50.855651400Z
Device Name : PCI\VEN_1002&DEV_6760&SUBSYS_166E103C&REV_00\4&189a9b7f&0&0008
Device Friendly Name : Radeon (TM) HD 6470M
Device Total Time : 5863ms
Device Degradation Time : 3754ms
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Diagnostics-Performance" Guid="{CFC18EC0-96B1-4EBA-961B-622CAEE05B0A}" />
<EventID>351</EventID>
<Version>1</Version>
<Level>1</Level>
<Task>4003</Task>
<Opcode>35</Opcode>
<Keywords>0x8000000000010000</Keywords>
<TimeCreated SystemTime="2013-07-21T04:12:07.531974100Z" />
<EventRecordID>3647</EventRecordID>
<Correlation ActivityID="{032B5C48-F800-0001-A71D-9299C085CE01}" />
<Execution ProcessID="1644" ThreadID="6744" />
<Channel>Microsoft-Windows-Diagnostics-Performance/Operational</Channel>
<Computer>bryan-HP</Computer>
<Security UserID="S-1-5-19" />
</System>
<EventData>
<Data Name="StartTime">2013-07-21T04:11:50.855651400Z</Data>
<Data Name="NameLength">17</Data>
<Data Name="Name">\Driver\amdkmdap</Data>
<Data Name="FriendlyNameLength">33</Data>
<Data Name="FriendlyName">AMD multi-vendor Miniport Driver</Data>
<Data Name="VersionLength">13</Data>
<Data Name="Version">8.14.01.6226</Data>
<Data Name="TotalTime">5844</Data>
<Data Name="DegradationTime">3755</Data>
<Data Name="PathLength">41</Data>
<Data Name="Path">C:\Windows\system32\DRIVERS\atikmpag.sys</Data>
<Data Name="ProductNameLength">11</Data>
<Data Name="ProductName">AMD driver</Data>
<Data Name="CompanyNameLength">29</Data>
<Data Name="CompanyName">Advanced Micro Devices, Inc.</Data>
<Data Name="DeviceNameLength">63</Data>
<Data Name="DeviceName">PCI\VEN_1002&DEV_6760&SUBSYS_166E103C&REV_00\4&189a9b7f&0&0008</Data>
<Data Name="DeviceFriendlyNameLength">21</Data>
<Data Name="DeviceFriendlyName">Radeon (TM) HD 6470M</Data>
<Data Name="DeviceTotalTime">5863</Data>
<Data Name="DeviceDegradationTime">3754</Data>
</EventData>
</Event>

Are you experiencing any problems other than seeing this event?

Adobe crash errors in the event viewer

I have two Windows 2008 R2 terminal servers running Adobe Reader 10.1.4.38 and I'm seeing errors like these:
Faulting module name: IA32.api_unloaded, version: 0.0.0.0, time stamp: 0x5012f8ca
Faulting module name: sqlite.dll_unloaded, version: 0.0.0.0, time stamp: 0x5012e5cd
The application then faults, killing the user's session.
Any idea of where to start with this?
Thanks for any/all help.

That's what I want to do, though I'm limited by the versions we've tested against internally. The other thought is we have this working in other environments without issue, so why not this one?
They should be similar set ups: Terminal server 2008R2, GPO's, limited users, etc.
I re-installed over the weekend.

Windows is Scanning and repairing drive... (- Errors in Event Viewer)

Long post, please be patient... :)
I have a fairly new (purchased 8/2013) Lenovo ThinkPad T431s with Windows 8.1 Pro 64-bit (updated from 8.0 -> 8.1). It has a very tricky error coming basically 8 / 10 boots:
Windows is Scanning and repairing drive...
Error details from Windows Event Viewer (a new similar error appears on every boot to event viewer):
A corruption was discovered in the file system structure on volume \?\Volume{f62db2cf-efe4-4b55-a3f7-0e7db991a984}.
A file on the volume is no longer reachable from its parent directory. The parent file reference number is 0x2000000000002. The name of the parent directory is "". The parent index attribute is ":$I30:$INDEX_ALLOCATION". The file reference
number of the file that needs to be reconnected is 0x400000003db80. There may be additional files on the volume that also need to be reconnected to this parent directory.
What has been done 1st trying to fix that:
SSD disk has been changed (image from previous SSD copied back) ->
no solution, error remains
chkdsk /F /R -> no solution, error remains
SFC /scannow -> no solution, error remains
dism /online /cleanup-image /restorehealth -> no solution, error remains after a few boots
TRIED using Windows 8.1 "Update & Recovery -> Refresh Your PC without affecting your files" -> Inserted the Lenovo "Operating System Recovery Disk Windows 8 Pro (OEM Activation 3.0 Required)" BUT Windows did not accept
that DVD claiming "The media inserted is not valid"... ???
Ended up calling Lenovo Support and they instructed me to order the Recovery DVD from
Lenovorecovery.com -> Unfortunatelly Windows does not recognice the DVD(s)...
mountvol returns:
\\?\Volume{4d337687-0033-42f7-8a8e-b6968b533cb3}\
(This is my C:\ drive where Windows installation resides)
\\?\Volume{e010cf9d-c04d-4c82-b517-3cda1b647fe7}\
*** NO MOUNT POINTS ***
\\?\Volume{f62db2cf-efe4-4b55-a3f7-0e7db991a984}\
*** NO MOUNT POINTS ***
\\?\Volume{33f0062f-0aff-4fd2-8402-1c7911d86897}\
*** NO MOUNT POINTS ***
Then running fsutil dirty query on each returns:
Volume - \\?\Volume{4d337687-0033-42f7-8a8e-b6968b533cb3} is NOT Dirty
Volume - \\?\Volume{e010cf9d-c04d-4c82-b517-3cda1b647fe7} is NOT Dirty
Volume - \\?\Volume{f62db2cf-efe4-4b55-a3f7-0e7db991a984} is Dirty
Volume - \\?\Volume{33f0062f-0aff-4fd2-8402-1c7911d86897} is NOT Dirty
The chkdsk on the dirty volume
\\?\Volume{f62db2cf-efe4-4b55-a3f7-0e7db991a984}\ returned:
The type of the file system is NTFS.
Insufficient storage available to create either the shadow copy storage file or
other shadow copy data.
A snapshot error occured while scanning this drive. Run an offline scan and fix.
Diskpart output on the same volume:
DISKPART> lis par
Partition ### Type Size Offset
Partition 1 Reserved 128 MB 17 KB
Partition 2 Recovery 1000 MB 129 MB
Partition 3 System 260 MB 1129 MB
Partition 4 Primary 146 GB 1389 MB
Partition 5 Recovery 350 MB 147 GB
Partition 6 Recovery 19 GB 148 GB
Questions:
1) Are my Partitions OK, haven't "touched" anything?
2) Excluded the dirty volume from boot checking with chkntfs /x
-> still the Error appears in Event viewer log (but Scanning is skipped/not shown anymore during the boot).
What is causing the error?
3) Why do I have three (3) recovery partitions?

What has happened in the past days:
A) Lenovo on-site-Support changed the motherboard -> had no impact on the error (which I expected).
B) I found
instructions how to manually create USB Flash stick with a booting Custom (OEM) Recovery Image.
C) Booted with USB and performed "Refresh your PC without affecting your files."
D) Windows was refreshed but...
-->>
Still the error remains (Windows scanning and repairing drive \?\Volume{f62db2cf-efe4-4b55-a3f7-0e7db991a984} on each and every boot.
1) Related Error in Event viewer (NTFS):
A corruption was discovered in the file system structure on volume \?\Volume{f62db2cf-efe4-4b55-a3f7-0e7db991a984}.
A file on the volume is no longer reachable from its parent directory. The parent file reference number is 0x2000000000002. The name of the parent directory is "". The parent index attribute is ":$I30:$INDEX_ALLOCATION". The file reference number of the
file that needs to be reconnected is 0x400000003db80. There may be additional files on the volume that also need to be reconnected to this parent directory.
2) Related Error in Event viewer (NTFS - Microsoft Windows NTFS):
Volume \\?\Volume{f62db2cf-efe4-4b55-a3f7-0e7db991a984} (\Device\HarddiskVolume5) needs to be taken offline to perform a Full Chkdsk. Please run "CHKDSK /F" locally via the command line, or run "REPAIR-VOLUME <drive:>" locally or remotely via
PowerShell.
-->>
Now Lenovo support is proposing a full re-install (to be performed by myself) of Windows as this is SW issue.
Summary:
- Refreshing my T431s with OEM Image does not help
- The error remains on \?\Volume{f62db2cf-efe4-4b55-a3f7-0e7db991a984} (\Device\HarddiskVolume5; Lenovo Recovery partition) OR at least Windows thinks so...

Webhost failed to process a request-sharepoint 2013 found error in event viewer

I am getting following error everyday in event viewer,
My server has 4GB ram, 64bit, 2.26ghz processors.
error:
WebHost failed to process a request.
Sender Information: System.ServiceModel.ServiceHostingEnvironment+HostingManager/64221192
Exception: System.ServiceModel.ServiceActivationException: The service '/_vti_bin/client.svc' cannot be activated due to an exception during compilation. The exception message is: Memory gates checking failed because the free memory (186724352 bytes)
is less than 5% of total memory. As a result, the service will not be available for incoming requests. To resolve this, either reduce the load on the machine or adjust the value of minFreeMemoryPercentageToActivateService on the serviceHostingEnvironment
config element.. ---> System.InsufficientMemoryException: Memory gates checking failed because the free memory (186724352 bytes) is less than 5% of total memory. As a result, the service will not be available for incoming requests. To resolve
this, either reduce the load on the machine or adjust the value of minFreeMemoryPercentageToActivateService on the serviceHostingEnvironment config element.
at System.ServiceModel.Activation.ServiceMemoryGates.Check(Int32 minFreeMemoryPercentage, Boolean throwOnLowMemory, UInt64& availableMemoryBytes)
at System.ServiceModel.ServiceHostingEnvironment.HostingManager.CheckMemoryCloseIdleServices(EventTraceActivity eventTraceActivity)
at System.ServiceModel.ServiceHostingEnvironment.HostingManager.EnsureServiceAvailable(String normalizedVirtualPath, EventTraceActivity eventTraceActivity)
--- End of inner exception stack trace ---
at System.ServiceModel.ServiceHostingEnvironment.HostingManager.EnsureServiceAvailable(String normalizedVirtualPath, EventTraceActivity eventTraceActivity)
at System.ServiceModel.ServiceHostingEnvironment.EnsureServiceAvailableFast(String relativeVirtualPath, EventTraceActivity eventTraceActivity)
Process Name: w3wp
Process ID: 11320
Thanks,
Deepak patel

Add more memory to the host. 4GB is 4GB less than the minimum system requirements for SharePoint.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Event Viewer Error When Installing QuickTime in Windows 7

Recently I installed QuickTime Player Version 7.7 (1680.34) on 64-bit Windows 7 workstation. There was an error in the Event Viewer:
Faulting application name: MSiExec.exe, version: 5.0.7601.17514, time stamp: ox4ce792c4
Faulting module name: QuickTime.qts_unloaded, version: 0.0.0.0, time stamp: ox4e13ba08
Exception code: oxc0000005
Fault offset: 0x7287a9e9
Faulting process id: ox4f8
Faulting application start time: 0x01cd1e60e81cd4ab
Faulting application path: c:\windows\syswow64\MSiExec.exe
Faulting module path: QuickTime.qts
Report Id: 2708fa37-8a54-11e1-8bb1-d4bed98d5633
The QuickTime function is OK.
Any idea about this error?
The same error happens whenever I install /remove the QuickTime.
Thanks,
Linda

Faulting application path: c:\windows\syswow64\MSiExec.exe
Taken at face value, the 32-bit Windows Installer Service is throwing the error.
Doublechecking ... The QuickTime Player is successfully uninstalling and reinstalling for you, despite the error message?

Event Viewer ACPI error MBP mid09

Hi, I have installed Win 7 on my MBP 5.5 mid 2009 and although its running well I am getting an error message in event viewer saying:
Error
25/09/2014 00:00:32
ACPI
13
None
something about the embedded controller failed to start in a reasonable time. Would anyone with the same mac please check their event logs to see if they have this error please?
I had this and a HAL error under Win 7 ultimate x64 (used this as a test os) so I installed Win 7 Pro from a Genuine Disc (I do not condone piracy) and I am getting the ACPI error (only after all the drivers were installed, the error message didnt show prior to boot camp 4 install). So before I spend £100 on a Genuine Windows disc (I already purchased Windows 8 at £106 but it seems apple dont support it on this mac :-(...) I'd like to know if its a failing logic board or driver related.
Thanks in advance
Darren

I have been running OSX for around 1 hour and then I rebooted into windows 7, loaded the event logs immediately and found the ACPI error had been recorded precisely 1 hour before windows had booted, I am wondering if this could be a bug between Mac/Windows time feature. after more restarts the ACPI isn't being recorded and other events times are correct.
edit:
I have just disabled the Synchronise with internet time feature in windows. I'll keep a look out.

AD Event Viewer Error: 1053

Hello,
I hope this is in the right forum....
I'm getting the following error in the event viewer. It is then followed by a warning, which is pasted below as well.
Log Name:      Directory Service
Source:        Microsoft-Windows-ActiveDirectory_DomainService
Date:          1/14/2014 12:21:49 AM
Event ID:      1168
Task Category: Internal Processing
Level:         Error
Keywords:      Classic
User:          ANONYMOUS LOGON
Computer:      SPROCKET.sprocket.superbikeschool.loc
Description:
Internal error: An Active Directory Domain Services error has occurred.
Additional Data
Error value (decimal):
1053
Error value (hex):
41d
Internal ID:
300068c
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-ActiveDirectory_DomainService" Guid="{0e8478c5-3605-4e8c-8497-1e730c959516}" EventSourceName="NTDS General" />
    <EventID Qualifiers="49152">1168</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>9</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8080000000000000</Keywords>
    <TimeCreated SystemTime="2014-01-14T08:21:49.537Z" />
    <EventRecordID>14117</EventRecordID>
    <Correlation />
    <Execution ProcessID="752" ThreadID="1044" />
    <Channel>Directory Service</Channel>
    <Computer>SPROCKET.sprocket.superbikeschool.loc</Computer>
    <Security UserID="S-1-5-7" />
</System>
<EventData>
    <Data>1053</Data>
    <Data>41d</Data>
    <Data>300068c</Data>
</EventData>
Log Name:      Directory Service
Source:        Microsoft-Windows-ActiveDirectory_DomainService
Date:          1/14/2014 12:21:49 AM
Event ID:      2886
Task Category: LDAP Interface
Level:         Warning
Keywords:      Classic
User:          ANONYMOUS LOGON
Computer:      SPROCKET.sprocket.superbikeschool.loc
Description:
The security of this directory server can be significantly enhanced by configuring the server to reject SASL (Negotiate, Kerberos, NTLM, or Digest) LDAP binds that do not request signing (integrity verification) and LDAP simple binds that are performed
on a cleartext (non-SSL/TLS-encrypted) connection. Even if no clients are using such binds, configuring the server to reject them will improve the security of this server.
Some clients may currently be relying on unsigned SASL binds or LDAP simple binds over a non-SSL/TLS connection, and will stop working if this configuration change is made. To assist in identifying these clients, if such binds occur this directory
server will log a summary event once every 24 hours indicating how many such binds occurred. You are encouraged to configure those clients to not use such binds. Once no such events are observed for an extended period, it is recommended
that you configure the server to reject such binds.
For more details and information on how to make this configuration change to the server, please see http://go.microsoft.com/fwlink/?LinkID=87923.
You can enable additional logging to log an event each time a client makes such a bind, including information on which client made the bind. To do so, please raise the setting for the "LDAP Interface Events" event logging category to level 2
or higher.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-ActiveDirectory_DomainService" Guid="{0e8478c5-3605-4e8c-8497-1e730c959516}" EventSourceName="NTDS General" />
    <EventID Qualifiers="32768">2886</EventID>
    <Version>0</Version>
    <Level>3</Level>
    <Task>16</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8080000000000000</Keywords>
    <TimeCreated SystemTime="2014-01-14T08:21:49.584Z" />
    <EventRecordID>14118</EventRecordID>
    <Correlation />
    <Execution ProcessID="752" ThreadID="1044" />
    <Channel>Directory Service</Channel>
    <Computer>SPROCKET.sprocket.superbikeschool.loc</Computer>
    <Security UserID="S-1-5-7" />
</System>
<EventData>
</EventData>
</Event>
I'm running Windows Server 2008 (not R2). The computer is a DC running only one domain, which only has about 6 computers on it.
Thanks,
Pete

For the first event, it is an internal error and I would recommend contacting Microsoft PSS to investigate about it if it does not appear.
For the second event, please refer to that: http://technet.microsoft.com/en-us/library/dd941829(v=ws.10).aspx
Just make sure that your AD-based systems / applications support LDAP signing before enabling it.
This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.
Get Active Directory User Last Logon
Create an Active Directory test domain similar to the production one
Management of test accounts in an Active Directory production domain - Part I
Management of test accounts in an Active Directory production domain - Part II
Management of test accounts in an Active Directory production domain - Part III
Reset Active Directory user password

MSE Event viewer errors

Hi,
recently I see two errors in the event viewer at every login. I think they are related to MSE. I already reformated my system but the errors occur right after I install MSE. The errors indicate that some rights are missing, but I use an administrator account,
therefore access should be granted. Please note that this is a fresh windows 7 installation without any third party software. I just install windows (no OEM), every driver, sp1, all windows updates (also recommended). Then I install MSE. After rebooting (into
an admin account) the errors appear.
I tried to reproduce the errors in a virtual machine with only win7 installed and every (also recommended) update. At first the errors didn't appear. Then I reverted the VM back to the point before I install MSE (which is after every update is applied)
and tried it again. I expected that these errors won't be there because I did just the same as before. But this time (after MSE was installed again) I rebooted multiple times and the errors appeared. I tried several other scenarios (admin/limited account etc)
but wasn't able to track down the actual cause. I think that MSE is working despite these error messages. However, when I see that the network inspection is not working, I'm getting worried.
Errors:
1) Event ID 7006 The ScRegSetValueExW call failed for Start with the following error:
Access is denied.
2) Event ID 3002 Microsoft Antimalware Real-Time Protection feature has encountered an error and failed.
Feature: Network Inspection System
Error Code: 0x80070005
Error description: Access is denied.
Reason: The system is missing updates that are required for running Network Inspection System. Install the required updates and restart the computer
Thank you!

TImbir
Can we get your event viewer logs? Please also run a system file check
Please provide us with your Event Viewer administrative logs by following these steps:
Click Start Menu
Type eventvwr into Search programs and files (do not hit enter)
Right click eventvwr.exe and click Run as administrator
Expand Custom Views
Click Administrative Events
Right click Administrative Events
Save all Events in Custom View As...
Save them in a folder where you will remember which folder and save as Errors.evtx
Go to where you saved Errors.evtx
Right click Errors.evtx -> send to -> compressed (zipped) folder
Upload the .zip file to Onedrive or a file sharing service and put a link to it in your next post
If you have updated to win 8.1 and you get the error message "the system cannot find the file specified" it is a known problem.
The work around is to edit the registry. If you are not comfortable doing this DONT. If you are, backup the key before you do
Press Win+"R" and input regedit
Navigate to:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WINEVT\Channels. Delete "Microsoft-Windows-DxpTaskRingtone/Analytic"
Please run a system file check (SFC) & DISM if you are on win 8 or higher
All instructions are in our Wiki article below...
Should you have any questions please ask us.
System file check (SFC) Scan and Repair System Files
Wanikiya and Dyami--Team Zigzag

Hpqcxs0. What is it ? errors in event viewer

I keep having errors in the event viewer that says hpqcxs0. A time out was reached (3000) milliseconds
while waiting for the hpqcxs08 service to connect. The other one is hpqcxs08 service failed to start due to th following error: service did not respond in a timely matter. Several of both of these. Seems to be some kind of error with the hp printers? I have an hp photosmart c4680, and a hp deskjet di560. Any help would do.

Hello Joshua Tay,
Please take a look at the following thread similar to this issue.
http://discussions.citrix.com/topic/326071-receiver-34-windows-8-sidebyside-error-starts-loading-then-exits/
Please note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
As this issue is relate to Citrix, to receive better support, it is recommended to ask in the related forum.
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

Unity_UMR error 113 &137 Event viewer

Similar Messages

Maybe you are looking for